Commit graph

500 commits

Author SHA1 Message Date
Edward Hervey
1aab9db803 hlsdemux2: Prune time maps when possible
Add a new method to prune unused time mappings (i.e. which aren't used by any
current media playlist).

Do that when doing flushing seeks. Could be used in other places later too.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
2022-08-04 14:49:21 +01:00
Edward Hervey
c20ad629c7 hlsdemux2: Allow DSN mismatches when re-syncing playlists
Some providers provide completely incompatible DSN across bitrates/renditions,
but do keep MSN consistent.

If we fail to synchronize playlist with DSN, retry without the DSN taken into
account.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2839>
2022-08-04 14:49:12 +01:00
Jan Schmidt
da65a7b0ba adaptivedemux2: Fixes for period switching in the output loop
Close some race conditions in switching to the next period,
by ensuring the tracks are completely drained first and by
not outputting EOS events to the output source pad
if there is another period pending.

Fixes Manifest_MultiPeriod_1080p.mpd some more.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
2022-08-04 13:43:57 +01:00
Jan Schmidt
de7e2c9b6b adaptivedemux2: stream: Set period has_next_period flag before EOS
Before sending EOS, update the period's has_next_period
flag and/or create the next period. This closes a race
where the output loop might receive the EOS event
and either push it downstream (causing premature EOS),
or receive it and try and switch to the next period
before that period is completely set up.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
2022-08-04 13:43:51 +01:00
Jan Schmidt
1863082efa adaptivedemux2: period: Rename 'closed' flag to 'has_next_period'
The flag is used to tell the output loop that a
next period is present, since the output loop
can't call the gst_adaptive_demux_has_next_period()
method.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
2022-08-04 13:43:36 +01:00
Jan Schmidt
e89d84a178 adaptivedemux2: Recheck for a pending track on drain
When a track is completely drained and EOS, but
there's a pending track on the slot loop again
to switch to that track.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
2022-08-04 13:43:31 +01:00
Jan Schmidt
f33fe73bb7 adaptivedemux2: Check stream selected instead of state
When combining stream flows, ignore streams that
are not selected, instead of checking whether
the stream state has changed yet.

Fixes another issue with dashdemux2 where it fails to
change to the next period when playing content with
several video, audio and text streams, as with
Manifest_MultiPeriod_1080p.mpd when seeking to 730
just before the end of the first period.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2838>
2022-08-04 13:43:25 +01:00
Nirbheek Chauhan
5da9f62313 rtsp+rtmp: Forward warning added to tls-validation-flags to our users
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.

In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.

Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.

We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.

Relevant upstream merge requests / issues:

https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214

https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179

https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
2022-07-30 11:27:12 +00:00
Mark Nauwelaerts
b5707e2371 videobox: avoid dropping caps fields for passthrough caps transform
Fixes potential negotiation failure in case downstream element
is a bit picky regarding the fields in question.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2786>
2022-07-29 18:44:13 +00:00
Adrian Fiergolski
8e6872a36e videoflip: Fix caps negotiation when method is selected
The caps negotiation should respect the selected method to the test pipeline below works properly.
gst-launch-1.0 videotestsrc ! video/x-raw,width=320,height=600 ! videoflip method=clockwise ! video/x-raw,width=600,height=320 ! fakesink

Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2803>
2022-07-28 00:00:47 +00:00
fduncanh
197b72f32a v4l2object.c: add support for Apple's full-range bt709 colorspace variant
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2793>
2022-07-26 15:14:41 +00:00
Elliot Chen
e0564b04c6 v4l2: fix the critical log when unreference the buffer with no data
In the trick mode, driver may queue a valid buffer follow by an
empty buffer which has no valid data to indicate EOS.For the empty
buffer whose memory is multi-plane, need to resize it before
unreference it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2731>
2022-07-25 16:44:05 +08:00
Sebastian Dröge
1728f8b72a qt: Fix another instance of Qt/GStreamer both defining GLsync differently
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/gstglfuncs.h:87,
                 from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:14:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/gstreamer-1.0/gst/gl/glprototypes/gstgl_compat.h:40:18: error: conflicting declaration 'typedef void* GLsync'
   40 | typedef gpointer GLsync;
      |                  ^~~~~~
In file included from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengl.h:127,
                 from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsggeometry.h:44,
                 from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgnode.h:43,
                 from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qsgrendererinterface.h:43,
                 from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/qquickwindow.h:44,
                 from ../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtQuick/QQuickWindow:1,
                 from ../gst-plugins-good-1.20.3/ext/qt/qtglrenderer.cc:6:
../gstreamer1.0-plugins-good/1.20.3-r0/recipe-sysroot/usr/include/QtGui/qopengles2ext.h:24:26: note: previous declaration as 'typedef struct __GLsync* GLsync'
   24 | typedef struct __GLsync *GLsync;
      |                          ^~~~~~

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2763>
2022-07-18 07:45:22 +00:00
Nirbheek Chauhan
41bf3f6c1b osxaudio: Fix deprecation in macOS 12.0
kAudioObjectPropertyElementMaster has been renamed to
kAudioObjectPropertyElementMain

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2761>
2022-07-16 06:16:17 +00:00
Jan Schmidt
ab459f0528 splitmuxsink: Fix memory leak
Fix a leak of the buffer info struct when reaching
EOS without data on the reference input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2751>
2022-07-12 11:22:33 +00:00
Sebastian Dröge
eb0746ba97 rtpjitterbuffer: Fix calculation of RFC7273 RTP time period start
This has to be based directly on the current estimated clock time and
has to allow for negative period starts.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2655>
2022-07-11 15:33:42 +00:00
Seungha Yang
b233df3537 splitmuxsink: Don't crash on EOS without buffer
Fix a case where upstream pushed EOS without buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2174>
2022-07-05 11:33:35 +00:00
Thibault Saunier
339f950e79 rtprtx: Fix copying extension headers
There was a typo leading to reading memory from the buffer we were
writing to.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2696>
2022-07-04 19:20:57 +00:00
fduncanh
735723c230 v4l2videodec: replace multiple decoder bug warnings with single one
Achieve this by dropping frames after a drain if the driver failed to so.
This works around RaspberryPi driver issue [1].

[1] https://github.com/raspberrypi/linux/issues/5059#issuecomment-

Fixes #1103

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2518>
2022-07-02 23:56:00 +00:00
Tim-Philipp Müller
90090dc13b tests: udpsink: make test work in environments without IPv6
Part-fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/939

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2659>
2022-07-02 11:57:31 +00:00
fduncanh
dfeb8198e4 v4l2videodec: replace multiple decoder bug warnings by a single warning
(warning due to incorrectly dropped frames at initial caps adjustment)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2517>
2022-06-29 19:50:15 +00:00
Jan Schmidt
0af4a53bc2 adaptivedemux2: Ignore stopped stream flow state
When calculating the combined stream flow state
for a period, don't consider stopped streams.

Fixes switching to the next period in DASH streams
with multiple video/audio/subtitle streams.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2684>
2022-06-29 16:35:26 +01:00
Jan Schmidt
a369448b0c adaptivedemux2: Clean up stream parsebins on finalize
Remove the parsebin for a stream from the overall
bin when cleaning up the stream, to avoid
keeping around old ones when moving between periods

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2676>
2022-06-29 14:33:30 +00:00
Jan Schmidt
63d3ba4dfb adaptivedemux2: Fix memory leaks and use-after-free
Fix various small memory leaks, and an invalid
access to GstEvent after giving away the ref
via gst_pad_push_event()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2676>
2022-06-29 14:33:30 +00:00
Jan Schmidt
4b7622b377 hlsdemux2: Fix potential segfault
Fix a potential segfault if we receive a ISO-FF stream
with moof before moov.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2676>
2022-06-29 14:33:30 +00:00
Jan Schmidt
b2944c36ca hlsdemux2: Fix memory leaks
Clean up various memory leaks

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2676>
2022-06-29 14:33:30 +00:00
Jan Schmidt
76e0333213 hlsdemux2: Free current_segment on finalize
Avoid a memory leak by making sure to release the
current segment on exit if non-NULL

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2676>
2022-06-29 14:33:30 +00:00
Tim-Philipp Müller
9272943bc7 coding style: allow declarations after statement
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1243/
and https://gitlab.freedesktop.org/gstreamer/gstreamer-project/-/issues/78

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2683>
2022-06-29 13:40:25 +00:00
Jan Schmidt
61e4f058ef adaptivedemux2: track: Fix buffering time calc before output
Use the lowest track input time as the output
time when calculating track buffering levels
before anything has been dequeued.

Fixes multi-period DASH not advancing to the
next period in some cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2650>
2022-06-28 18:34:31 +00:00
Jan Schmidt
16a04f7697 adaptivedemux2: track: Add period number to most debug statements
Store the period number the track belongs to, and
add it in various debug statements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2650>
2022-06-28 18:34:31 +00:00
Jan Schmidt
e1559d26d0 adaptivedemux2: stream: Don't take TRACKS_LOCK when sending EOS event
The stream tracks list can't change while we're
iterating it from the scheduling thread,
and the event handler immediately takes the
tracks lock, causing a deadlock.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2650>
2022-06-28 18:34:31 +00:00
Edward Hervey
e9f8c7d33a hlsdemux2: Improve media playlist updates
* When dealing with rendition streams, we attempt to synchronize the media
  playlist against the variant stream. This helps with speeding up the correct
  initial fragment search and avoids issues when streams at activated at a much
  later time.
* Also add checks for variant stream existence before attempting to use them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:24 +00:00
Edward Hervey
0a658840da hlsdemux2: Only seek on selected streams
When handling seeks, there is no need to seek on unselected streams. If they
later get activated they will be properly seek onto

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:24 +00:00
Edward Hervey
787dbfd4e4 tests: check: Update hlsdemux2 tests for playlist changes
We no longer do auto-magic fallbacks when synchronizing a disconnected
playlist. It is handled at a higher level.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:24 +00:00
Edward Hervey
34a7710762 hlsdemux2: Fix debug return statement
Due to latest commits res could have been NULL.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:24 +00:00
Edward Hervey
82bd65e711 hlsdemux2: No longer re-add segments from before the playlist
When updating playlists, there is a possibility that the playlists don't
perfectly align, but the last entry of the previous playlist is *just* before
the first entry of the new playlist.

In those cases, we still can transfer the timing information from one playlist
to another, but we do not want to return that segment as being the matching one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
b9effe04e3 hlsdemux2: Use variant stream as support for synchronizing playlists
When matching playlists, there is a possibility that rendition streams will not
have been updated in time (for example because that stream started later, or
playback was paused). This would cause several playback failures and seeking
failures.

In order to still fall back on our feet, attempt to synchronize that rendition
playlist against the current variant playlist. This will attempt to match the
stream time using SN/DNS/PDT/...

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
87ab729551 hlsdemux2: Detect synchronization loss
If we have been updating too slowly and have gone out of the current live
window, inform the baseclass accordingly.

This is different from the case where we have been updating quicker than what
the server provides.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
9cdadf6d08 hlsdemux2: More improvement/fixes to position tracking
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
d88d7d5b55 adaptivedemux2: Handle loss of synchronization
Add a new custom GstFlowReturn so that subclasses can notify that they have lost
live synchronization.

When that happens, do a flushing seek back to the live position

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
37b17ba0eb adaptivedemux2: Fix SNAP seek handling
* Since only flushing seeks are allowed, the "current" position is always the
  global output position (and not "some" stream current position).

* In terms of figuring out to which stream to "snap" to, we can send it to any
  selected stream. Removes the requirement of this function to a specific output
  pad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
5271603852 hlsdemux2: Fix position tracking
Remove the "pending advance" hack and instead rely on the base stream current
position to track our position (instead of a potentially NULL "current
segment").

Also ensure the media playlists are always refreshed with valid stream time,
even if there is no current segment.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
8fd2dcd266 hlsdemux2: Add a new method to synchronize two media playlist
This allows transfering the stream time of the playlist to an updated
variant/rendition.

This allows updating that information without having a "current segment"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Edward Hervey
4eac7f0e06 adaptivedemux2: Initialize and use stream start/current position
The stream start and current position would be properly set when seeking or
activating a stream after playback started. But it would never be properly
initialized.

Set it to NONE initially to indicate to subclasses that no position has been
tracked yet. This will allow them to detect initial stream usage.

Futhermore, once the initial streams setup is done, make sure that it is set to
a valid initial value:
* The minimum stream time in live
* Or else the period start

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
2022-06-28 17:59:23 +00:00
Nicolas Dufresne
7c40fcb66e v4l2videodec: Fix activation of internal pool
If the driver does not support VIDIOC_CREATE_BUFS ioctl, the pool
configuration may get changed, which requires a validation. This would
fail to activate a pool in a case it shouldn't normally fail unless we
are out of memory.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2456>
2022-06-28 16:19:53 +00:00
Tim-Philipp Müller
afc94046ba dv, opusparse: fix duplicate symbols in static build
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1262

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2670>
2022-06-28 01:29:06 +01:00
Tim-Philipp Müller
c895cdbec8 tests: skip unit tests for dependency-less elements that have been disabled
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1136

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2660>
2022-06-27 07:05:00 +00:00
Tim-Philipp Müller
0e551871c4 examples: don't try and build jack examples if jack was disabled
Fixes meson build ERROR: Unknown variable "libjack_dep".

Fixes #1301

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2656>
2022-06-24 16:00:37 +00:00
Marc Leeman
db5a4b490d rtpsession: properly initialise favor-new property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2625>
2022-06-17 13:05:18 +00:00
Edward Hervey
74f25cca31 hlsdemux2: Look for mpegts synchronization point further
Some mpeg-ts streams have extra data at the beginning. While it's not ideal, we
should be able to cope with it.

Therefore increase the initial search window for at least 4 consecutive
synchronization points to 1kB.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2626>
2022-06-17 12:30:09 +00:00
Sebastian Dröge
cf887f1b8e matroskademux: Avoid integer-overflow resulting in heap corruption in WavPack header handling code
blocksize + WAVPACK4_HEADER_SIZE might overflow gsize, which then
results in allocating a very small buffer. Into that buffer blocksize
data is memcpy'd later which then causes out of bound writes and can
potentially lead to anything from crashes to remote code execution.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: CVE-2022-1920

https://gstreamer.freedesktop.org/security/sa-2022-0004.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1226

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2612>
2022-06-15 18:35:12 +00:00
Sebastian Dröge
14d306da6d qtdemux: Fix integer overflows in zlib decompression code
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.

In addition the size of the decompressed data is limited to 200MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.

Also fix a bug where the available output size on the next iteration in
the zlib decompression code was provided too large and could
potentially lead to out of bound writes.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: tbd

https://gstreamer.freedesktop.org/security/sa-2022-0003.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
2022-06-15 17:50:55 +00:00
Sebastian Dröge
ad6012159a matroskademux: Fix integer overflows in zlib/bz2/etc decompression code
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.

In addition the size of the decompressed data is limited to 120MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.

Also fix a bug where the available output size on the next iteration in
the zlib/bz2 decompression code was provided too large and could
potentially lead to out of bound writes.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: CVE-2022-1922, CVE-2022-1923, CVE-2022-1924, CVE-2022-1925

https://gstreamer.freedesktop.org/security/sa-2022-0002.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
2022-06-15 17:50:55 +00:00
Sebastian Dröge
f503caad67 avidemux: Fix integer overflow resulting in heap corruption in DIB buffer inversion code
Check that width*bpp/8 doesn't overflow a guint and also that
height*stride fits into the provided buffer without overflowing.

Thanks to Adam Doupe for analyzing and reporting the issue.

CVE: CVE-2022-1921

See https://gstreamer.freedesktop.org/security/sa-2022-0001.html

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1224

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2608>
2022-06-15 16:40:48 +00:00
Adam Doupe
be11a6e26b smpte: Fix integer overflow with possible heap corruption in GstMask creation.
Check that width*height*sizeof(guint32) doesn't overflow when
allocated user_data for mask, potential for heap overwrite when
inverting.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1231

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2603>
2022-06-15 14:53:50 +00:00
Piotr Brzeziński
0a2c490723 adaptivedemux2: Prevent duplicate symbols on static builds
Uses prelude header files with #defines to rename DASH and MSS
symbols duplicated in their old standalone versions.
Also redefines soup-related functions when building it for
adaptivedemux2 to prevent symbol conflicts there.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2534>
2022-06-15 01:13:16 +00:00
Jan Schmidt
6e48a3ec28 adaptivedemux2: Improve reverse playback buffering.
In reverse playback, store the lowest running time in each GOP
as the input_time for buffering purposes. That means we end up
storing at least a complete GOP before declaring buffering
100%

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2510>
2022-06-14 13:06:49 +01:00
Jan Schmidt
a4a805312d adaptivedemux2: reverse playback running times
Account for running time moving non-monotonically in
reverse playback by tracking the highest running time
seen at each point.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2510>
2022-06-14 13:06:49 +01:00
Tim-Philipp Müller
9d9e59622f Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
2022-06-10 06:01:41 +00:00
Marc Leeman
8bdf7e8ad8 fix trivial distination -> destination
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2573>
2022-06-08 14:40:09 +02:00
Ignacio Casal Quinteiro
408f37c1d9 osxaudio: remove usage of goto
It is easier to follow the code without the goto now

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
2022-06-08 06:28:17 +00:00
Ignacio Casal Quinteiro
caa5972abd osxaudio: support hidden devices
macOS features hidden devices. These are devices that will
not be shown in the macOS UIs and that cannot be retrieved
without having the specific UID of the hidden device. There
are cases when you might want to have a hidden device, for example
when having a virtual speaker that forwards the data to a virtual
hidden input device from which you can then grab the audio.
The blackhole project supports these hidden devices and
this patch provides a way that if the device id is a hidden
device it will use it instead of check the hardware list of devices
to understand if the device is valid.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
2022-06-08 06:28:17 +00:00
Ignacio Casal Quinteiro
243f8e8882 osx: fix indent
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
2022-06-08 06:28:17 +00:00
Ignacio Casal Quinteiro
57fed3c911 osxaudio: iterate device only if needed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
2022-06-08 06:28:17 +00:00
Ignacio Casal Quinteiro
a4a4d295a1 osxaudio: reduce scope of default device id variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
2022-06-08 06:28:17 +00:00
Bastien Nocera
e37c462f87 gtk: Fix double-free when OpenGL can't be initialised
gtk_gl_area_get_error() doesn't return a copy of the error, but just the
error. If initialising OpenGL fails, then GtkGstGLWidget will consume
the error, and cause GTK to try and display freed memory.

==50914== Invalid read of size 8
==50914==    at 0x4C4CB8A: gtk_gl_area_draw_error_screen (gtkglarea.c:663)
==50914==    by 0x4C4CB8A: gtk_gl_area_draw (gtkglarea.c:687)
==50914==    by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914==    by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914==    by 0x4D4B6BF: gtk_stack_render (gtkstack.c:2207)
==50914==    by 0x4BB4B03: gtk_css_custom_gadget_draw (gtkcsscustomgadget.c:159)
==50914==    by 0x4BBA4C4: gtk_css_gadget_draw (gtkcssgadget.c:885)
==50914==    by 0x4D4D780: gtk_stack_draw (gtkstack.c:2119)
==50914==    by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914==    by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914==    by 0x4BAF0C3: gtk_container_draw (gtkcontainer.c:3674)
==50914==    by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914==    by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914==  Address 0x187a0818 is 8 bytes inside a block of size 16 free'd
==50914==    at 0x48480E4: free (vg_replace_malloc.c:872)
==50914==    by 0x49A5B8C: g_free (gmem.c:218)
==50914==    by 0x49C1013: g_slice_free1 (gslice.c:1183)
==50914==    by 0x4990DE4: g_error_free (gerror.c:870)
==50914==    by 0x4990FE9: g_clear_error (gerror.c:1052)
==50914==    by 0x1A489780: _get_gl_context (gtkgstglwidget.c:540)
==50914==    by 0x1A4863CB: gst_gtk_invoke_func (gstgtkutils.c:39)
==50914==    by 0x49A3834: g_main_context_invoke_full (gmain.c:6137)
==50914==    by 0x1A486450: gst_gtk_invoke_on_main (gstgtkutils.c:59)
==50914==    by 0x1A48A29E: gtk_gst_gl_widget_init_winsys (gtkgstglwidget.c:632)
==50914==    by 0x1A4887E7: gst_gtk_gl_sink_start (gstgtkglsink.c:267)
==50914==    by 0x6579810: gst_base_sink_change_state (gstbasesink.c:5662)
==50914==  Block was alloc'd at
==50914==    at 0x484586F: malloc (vg_replace_malloc.c:381)
==50914==    by 0x49A9278: g_malloc (gmem.c:125)
==50914==    by 0x49C1BA5: g_slice_alloc (gslice.c:1072)
==50914==    by 0x49C3BCC: g_slice_alloc0 (gslice.c:1098)
==50914==    by 0x499096B: g_error_allocate (gerror.c:708)
==50914==    by 0x4990AF1: UnknownInlinedFun (gerror.c:722)
==50914==    by 0x4990AF1: g_error_copy (gerror.c:892)
==50914==    by 0x4C4B9F9: gtk_gl_area_set_error (gtkglarea.c:1036)
==50914==    by 0x4C4BAF7: gtk_gl_area_real_create_context (gtkglarea.c:346)
==50914==    by 0x4B21B28: _gtk_marshal_OBJECT__VOIDv (gtkmarshalers.c:2730)
==50914==    by 0x4920B78: UnknownInlinedFun (gclosure.c:893)
==50914==    by 0x4920B78: g_signal_emit_valist (gsignal.c:3406)
==50914==    by 0x4920CB2: g_signal_emit (gsignal.c:3553)
==50914==    by 0x4C4B927: gtk_gl_area_realize (gtkglarea.c:308)

Reproduced by running:
MESA_GL_VERSION_OVERRIDE=2.7 totem

See https://gitlab.gnome.org/GNOME/totem/-/issues/522

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2565>
2022-06-07 17:36:26 +02:00
Sebastian Dröge
47aab6c832 flvdemux: Make use of the streams API if used in a streams-aware bin
This allows adding audio/video streams after 6s.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2559>
2022-06-07 10:52:46 +00:00
Jan Alexander Steffens (heftig)
637406cdb1 aacparse: Avoid mismatch between src_caps and output_header_type
If our downstream caps didn't intersect, we attempted to convert between
raw and ADTS stream formats, if possible. If the caps still did not
intersect, we then used the modified `src_caps` but left the
`output_header_type` unmodified.

This caused a mismatch between caps and actual stream format.

Avoid this by first copying the `src_caps` to `convcaps` for the
additional intersection tests, replacing `src_caps` if we succeed.

While we're here, clean up the code a bit and remove the `codec_data`
field from outgoing ADTS caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2550>
2022-06-06 15:09:09 +00:00
Sebastian Dröge
e5f9bb973f flvdemux: Actually make use of the debug category
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2552>
2022-06-06 14:36:41 +00:00
Stéphane Cerveau
c3bb04f779 soup: fix soup debug category
Use soup debug category in souploader
for soup plugin element load.

Inititalize properly soup utils category.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2535>
2022-06-02 12:55:13 +00:00
Seungha Yang
238ce301b6 hlsdemux2: Adjust debug log level
HLS manifest might not be represented by a single common caps
when different codecs are mixed in a playlist, but it
does not seem to be a critical issue we need to warn.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2516>
2022-06-01 14:32:55 +00:00
Stéphane Cerveau
6b55f97529 adaptivedemux2: fix plugin/element init
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.

Initialize the debug categories properly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2348>
2022-05-30 13:13:48 +00:00
Jan Schmidt
a8f18aef18 rtpptdemux: Don't GST_FLOW_ERROR when ignoring invalid packets
https://bugzilla.gnome.org/show_bug.cgi?id=741398 changed
rtpptdemux in 2014 to not post a GST_ELEMENT_ERROR on the
bus when dropping an invalid (non-RTP) packet, but still
returned GST_FLOW_ERROR upstream - so the pipeline still
stops, but now without a useful bus error.

Return GST_FLOW_OK instead, so the pipeline keeps
running. Some old telephony equipment can send invalid
packets before the real RTP traffic starts.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2520>
2022-05-29 20:27:38 +10:00
Nirbheek Chauhan
a6db1a4c81 jack: Always use jack_free as specified by the docs
Fixes a crash on Windows due to a CRT mismatch. The JACK installation
still uses MSVCRT, and we the Universal CRT for both MinGW and MSVC.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2497>
2022-05-28 11:34:23 +00:00
Nirbheek Chauhan
4865f36344 jack: Add support for detecting libjack on Windows
No source code changes were necessary to get the plugin working on
Windows with MSVC.

Run QJackCtl and audiotestsrc ! jackaudiosink just works.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2497>
2022-05-28 11:34:23 +00:00
Hou Qi
7f2fb3b783 v4l2: Reset transfer in gst_v4l2_object_acquire_format()
get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
2022-05-26 17:09:28 +00:00
Piotrek Brzeziński
5490189b9b cutter: Include running/stream-time in messages
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2490>
2022-05-25 12:27:10 +00:00
Stéphane Cerveau
39b13fcdbd soup: Fix plugin/element init
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.

Initialize the debug category properly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2349>
2022-05-25 09:33:56 +02:00
Eli Schwartz
79c3bbc2ed meson: use better zlib dependency fallback
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.

But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
2022-05-24 19:39:29 +00:00
Nicolas Dufresne
6d6ebbbb36 v4l2videodec: Fix missing handling of resolution-change
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.

Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
2022-05-24 18:02:12 +00:00
Nicolas Dufresne
4e441417b8 v4l2videodec: Downgrade to info resolution-change trace
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
2022-05-24 18:02:12 +00:00
Tim-Philipp Müller
e64c6f0b93 shout2: fix compiler warnings and bump req to libshout >= 2.4.2
Fix compiler warnings with latest libshout version (2.4.6).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2473>
2022-05-23 20:23:38 +01:00
László Károlyi
fedb48c68f shout2send: Adding send-title-info and user-agent options
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2420>
2022-05-23 16:01:48 +00:00
Sebastian Dröge
7273024ae5 qtdemux: Add support for ONVIF XML Timed MetaData
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2453>
2022-05-20 13:01:44 +00:00
Sebastian Dröge
365a9af9c5 qtdemux: Add parsing/dumping of nmhd / metx boxes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2453>
2022-05-20 13:01:44 +00:00
Sebastian Dröge
04f6258863 qtdemux: Parse styp box for informational purposes
And include some more details in the debug logs for the ftyp box too.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2453>
2022-05-20 13:01:44 +00:00
Hou Qi
85b53bb65d v4l2: set default resolution if caps has no such information
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.

So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
2022-05-20 12:23:40 +00:00
Jan Schmidt
7322a6d004 splitmuxsrc: Re-queue sticky events after probing.
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
2022-05-17 11:55:40 +00:00
Jan Alexander Steffens (heftig)
d0fdfa76ae deinterlace: Clean up error handling in chain and _push_history
- Consistently unref the chained buffer at the end of the chain
  function, if we're not handing it off to `gst_pad_push`. This avoids a
  few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
  crashing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
2022-05-17 10:56:23 +00:00
Jan Alexander Steffens (heftig)
718d31fe63 splitmuxsink: When flushing, exit handle_mq_input quickly
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.

Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
2022-05-17 09:24:10 +00:00
Jan Alexander Steffens (heftig)
fd27ee1537 splitmuxsink: Avoid deadlock on release, harder
Unlock after broadcasting and wait for the pad to be free before
relocking the muxer, giving the input probe a chance to react to our
broadcast.

Improves the fix from
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/838.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
2022-05-17 09:24:10 +00:00
Shingo Kitagawa
92c0a462ae wavparse: fix typo in debug message
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2425>
2022-05-16 19:31:18 +09:00
Thibault Saunier
1cb4c050d0 rtpbin: Avoid holding lock GST_RTP_BIN_LOCK when emitting pad-added
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2411>
2022-05-13 06:25:03 +00:00
Sebastian Dröge
1223324246 qtdemux: Don't use tfdt for parsing subsequent trun boxes
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.

At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.

This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
2022-05-13 04:19:36 +00:00
Guillaume Desmottes
aa3b6a11e0 vpxenc: enforce strictly increasing pts
From vpx_codec_encode() documentation:
  "The presentation time stamp (PTS) MUST be strictly increasing."

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
2022-05-12 13:00:53 +02:00
Guillaume Desmottes
10b837ae5e vpxenc: conver input pts to running time
The input pts needs to be strictly increasing, see vpx_codec_encode() doc, so convert it to
running time as we don't want to reset the encoder for each segment.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
2022-05-12 13:00:53 +02:00
Guillaume Desmottes
1e829696e8 vpxenc: fix crash if encoder produces unmatching ts
If for some reason the encoder produces frames with a pts higher than
the input one, we were dropping all the video encoder frames and ended
up crashing when trying to access the pts of a NULL pointer returned by
gst_video_encoder_get_oldest_frame().

I hit this scenario by feeding a decreasing timestamp to vp8enc which
seem to confuse the encoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
2022-05-12 13:00:53 +02:00
Nicolas Dufresne
522f19e013 v4l2videoenc: Setup crop rectangle if needed
Hantro H1 and Rockchip VEPU2 drivers will pad the width/height to a
multiple of 16. In order to obtain the right JPEG size, the image needs
to be cropped using the S_SELECTION API. This support is added as best
effort since older drivers may emulate this by looking at the capture
queue width/height.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2329>
2022-05-07 11:35:14 +00:00
Sebastian Dröge
d2c6f21fc1 mp4mux: Disable aggregator's default negotiation
mp4mux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.

By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
2022-05-05 17:41:58 +00:00
Sebastian Dröge
841cba4182 flvmux: Disable aggregator's default negotiation
flvmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.

By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
2022-05-05 17:41:58 +00:00
Matthew Waters
f4f342aa78 wavparse: ensure that any pending segment is sent before an EOS event is sent
Specifically fixes seqnum handling when an aggregator-based element
(audiomixer et al) is downstream and a seek is performed that
immediately causes an EOS from wavparse.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2356>
2022-05-04 08:00:02 +00:00
Sebastian Dröge
7466444b63 rtpjitterbuffer: Free CNAME/SSRC mappings on finalize and PAUSED->READY
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
2022-04-29 23:33:47 +03:00
Sebastian Dröge
2c405da921 rtpmanager: Refactor RTCP packet loops to fix control flow
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.

Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
2022-04-29 23:13:15 +03:00
Seungha Yang
6619f1611f rtpjitterbuffer: Initialize variables
Avoid use of uninitialized variable
Fixing MSVC warning
gstrtpjitterbuffer.c(4733) : warning C4700: uninitialized local variable 'have_sdes' used

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2315>
2022-04-28 12:37:13 +00:00
Edward Hervey
7c9eb0335f mssdemux2: Don't expose/use streams we can't handle yet
Avoids issues further down

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2319>
2022-04-28 10:45:37 +00:00
Edward Hervey
2ec79418df mssdemux2: Ensure stream/track uniqueness
If there is more than one track of the same type (say audio), we would end up
creating several stream/types with the same name.

Instead use the MSS stream name property to make them unique

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2319>
2022-04-28 10:45:37 +00:00
dongil.park
5b11e6a3d0 wavparse: Unset DISCONT buffer flag for divided into multiple buffers in push mode
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
2022-04-27 14:29:10 +00:00
Sebastian Dröge
9d5179ad3f rtpjitterbuffer: add the reference timestamp meta in more situations
Previously, we only added it when actually performing synchronization
based on the NTP time.

The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.

Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
2022-04-27 12:35:21 +00:00
Sebastian Dröge
ed425e2785 rtpgstpay: Don't push packets before the first input buffer is received
It's not possible to create a valid RTP timestamp for them, which would
cause a potentially very big RTP timestamp discontinuity between those
first packets (created from initial events) and the packet based on the
first input buffer.

As a side-effect, also simplify the packet aggregation code a bit and
work with only a single level of buffer lists.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1157

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2250>
2022-04-27 11:55:17 +00:00
Havard Graff
390ec99f1b rtptwcc: don't map the buffer twice
...and use the pt extracted rather than the one from RTPPacketInfo
when logging.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2271>
2022-04-26 10:27:25 +00:00
Thibault Saunier
d673a90aea rtpsession: Emit "notify::stats" when we update stats from RR or SR
Sensibily optimizing caching the pspecs and using them directly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2266>
2022-04-26 08:49:42 +00:00
Mathieu Duponchelle
3391a7d499 rtpredenc: quieten warning about ignoring header extensions
Turn it into a FIXME, and only log once

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2279>
2022-04-23 01:04:54 +00:00
Havard Graff
b7b71e6974 rtprtxsend: mark RTX buffers with GST_RTP_BUFFER_FLAG_RETRANSMISSION
It is useful for elements downstream from rtxsend to know if the RTP
buffer they are dealing with is an RTX buffer or not.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2272>
2022-04-22 19:27:45 +00:00
Tristan Matthews
27dea62304 mp4mux: fix spelling
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2241>
2022-04-22 14:07:57 +00:00
Jonas Bonn
2f6ad787b2 multiudpsink: allow binding to IPv6 address
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6.  When binding to an IPv6 address, this
results in the following error:

gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)

This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
2022-04-22 10:43:13 +00:00
Camilo Celis Guzman
5eadde319c rtphdrextsdes: fixup test trying to g_free a local variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2235>
2022-04-22 08:41:59 +00:00
Edward Hervey
964ee0299d hls/m3u8: Fix starting segment for live playlist
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"

This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.

Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
2022-04-22 08:06:27 +00:00
Edward Hervey
8f2d347559 hls: Relax webvtt checks
If no hour field is present (which is allowed), the remaining data can be less
than 15 character.

Fix time translation failures if the hour field wasn't present

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2248>
2022-04-20 17:47:00 +00:00
Sebastian Dröge
02115a5efc rtpmanager: Move some duplicated constant and helper function to a single place
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
c7e12974ba rtpbin/rtpjitterbuffer: Don't parse RTCP SRs twice unless needed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
82169aa140 rtpjitterbuffer: Add property to throttle handling of RTCP SR / NTP-64 syncing
This proxies the "rtcp-sync-interval" property of rtpbin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
ce38614e1a rtpsession: Handle RTCP-SR-REQ (RFC6051) RTCP feedback message
This causes an RTCP SR to be sent at the earliest possible time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
0c819d2f31 rtpbin/rtpjitterbuffer: Allow syncing to an SR without CNAME if the CNAME is already known
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
cbaac3cdba rtpbin/jitterbuffer: Use inband 64-bit NTP timestamps according to RFC6051 for faster synchronization
When signalled via the caps that the header extension is used, it will
be read and used in the same way as the RTP/NTP time mapping from RTCP
SRs.

If the CNAME of the stream's SSRC is provided out of band via e.g. the
SDP then this allows streams to be synchronized immediately on the first
packet instead of having to wait for the first RTCP SR to arrive.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/383

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
7c796b3c05 rtpsession: Only add send latency to the running time if it is actually known
Otherwise we can't know the running time yet if rtcp-sync-send-time is
set, and have to wait until the latency is known later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
7ffc830959 rtpsession: Update 64-bit NTP header extensions with the actual NTP time in senders
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Sebastian Dröge
8980c35efe rtpmanager: Add header extension implementation for the 64-bit RFC6051 NTP header extension
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Xavier Claessens
e950095867 Always define ENABLE_NLS
GLib guarantees libintl API is always available, provided by
proxy-libintl as last resort. GLib itself unconditionally define
ENABLE_NLS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
82ca0e291b Delete unused i18n headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Tim-Philipp Müller
0dd04764f7 tests: dash_mpd: fix linker issues with non-optimizing compilers
undefined reference to `download_request_take_buffer'

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117#note_1344646

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2228>
2022-04-19 10:35:30 +00:00
Ruben Gonzalez
70579285a8 gst_plugin_load_file: force plugin reload if diff filename
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.

This seems to have also fixed some documentation issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
2022-04-19 14:26:08 +05:30
Edward Hervey
af78c16dd5 New HLS, DASH and MSS adaptive demuxer elements
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.

These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).

Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.

Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
2022-04-18 14:11:23 +00:00
Hou Qi
8dcb8a28af v4l2videodec: copy colorimetry values to output_state caps
This is to avoid transcoding negotiation fail between v4l2h265dec
and v4l2h264enc caused by colorimetry mismatch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2192>
2022-04-18 13:17:55 +00:00
Brad Hards
488b760e7e tests: rename 'icles' subdir to be more descriptive
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2178>
2022-04-14 11:57:11 +00:00
Havard Graff
71891e5647 qtdemux: fix leak of channel_mapping
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2179>
2022-04-14 19:41:36 +09:00
Ming Qian
030d749019 doc: Update cache after NV12_8L128 and NV12_10BE_8L128 addition
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Ming Qian
dce02a870e v4l2: Add NV12_8L128 in gst_v4l2_object_get_caps_info
It should be included in
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1379>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Ming Qian
6af66167d0 v4l2: Add a missed break
Fix a typo that miss a break in the switch statement

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>
2022-04-13 07:20:58 +00:00
Robert Rosengren
e4a6521ac7 rtpbin: Fix division by zero when using ts-offset-smoothing-factor
avg_ts_offset may cause division by zero when calculating potential
overflow protection. This fix will avoid the division.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2151>
2022-04-11 15:29:49 +02:00
Tristan Matthews
86f0f8b67f rtpopusdepay: assume 2 channels if sprop-stereo is missing
Fixes #1064

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2125>
2022-04-08 13:11:25 +00:00
Matthias Fuchs
42ec223f94 qmlglsrc: Fix deadlock when stopping
This fix makes sure that streaming thread stops waiting when the
qmlglsrc element transitions from playing to paused.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2115>
2022-04-06 10:54:51 +00:00
Matthias Fuchs
af71adf315 qmlglsrc: Fix missing depth & stencil buffer
Qt Quick primitives which have some kind of alpha blending
(transparency, rounded corners) are z-sorted by Qt and rendered in the
correct order. For opaque primitives Qt relies on the OpenGL depth
buffer to correctly determine the visibility of stacked elements.

This change enables the depth buffer to make sure that opaque primitives
are correctly z-stacked.

https://doc.qt.io/qt-6/qtquick-visualcanvas-scenegraph-renderer.html#opaque-primitives

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2114>
2022-04-06 09:18:16 +00:00
Sebastian Dröge
0813efc821 rtpstats: Remove non-existing twcc field docs from RTPPacketInfo and add missing field docs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2121>
2022-04-06 10:15:13 +03:00
Sebastian Dröge
46d7763879 rtpsession: Remove unused twcc fields from the struct
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2121>
2022-04-06 10:15:13 +03:00
Xavier Claessens
a40634eebe Use gmodule-no-export-2.0
We don't need `-Wl,--export-dynamic`, that's used only for executables
that needs to export an API to be used by plugins they load.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Xavier Claessens
b004464ac6 Remove glib and gobject dependencies everywhere
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.

While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Thibault Saunier
b358897a3b navigation: Rename parse_state to parse_modifier_state
`parse_state` sounds a bit weird and `parse_modifier_state` is clearer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2087>
2022-04-01 06:38:43 +00:00
Nirbheek Chauhan
b7086a368f meson: Add some messages when selecting libsoup
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>
2022-03-29 18:30:03 +00:00
Nirbheek Chauhan
54eff61f0f soup: Fix usage of symbols / defines that are gone in libsoup3
I am not sure about the SOUP_MESSAGE_OVERWRITE_CHUNKS change, but it
was definitely already broken when using libsoup-3.0 in a shared
build. souphttpsrc probably needs to be ported from SoupMessage to
SoupServerMessage when using libsoup-3.0.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1111

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2032>
2022-03-29 18:30:03 +00:00