This reintroduces the fix for bug #593391. It also applies it in
gst_rtp_session_sync_rtcp() which has very similar code to
gst_rtp_session_send_rtcp().
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes#593354
Recent changes in gst-plugins-good/gst/effectv prevents it from being compiled
with gcc 3. The problem is that the new code uses preprocessor conditionals
within a macro call which does not work with older versions of gcc.
Fixes bug #593688.
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields). (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0). As such, ensure/force
simple sequential sending of non-interleaved streams.
3GPP specs define a number of tags along with precise layout. While these
are normally expected to be found in a container whose major brand is a
3GPP brand, this may also happen when a 3GPP brand is only mentioned as a
compatible brand. Apply some checks, heuristic and fallbacks to extract
such tags as well.
Handle large, invalid or otherwise unusual chunk sizes.
Verify some chunk sizes to be at least the size they are
expected to be and round up some sizes to even number for
e.g. offset administration, which must also be properly
tracked in push mode.
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes#561752
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.
Fixes#581375
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.
Fixes#580144
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
When the number of participants is less than 50, the RFC allows for sending the
BYE packet immediatly instead of using the regular BYE timeout.
Fixes#567828.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_setcaps_send_rtp), (create_send_rtp_sink):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
When an SSRC is found on the caps of the sender RTP, use this as the
internal SSRC. Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_getcaps_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_schedule_bye_locked), (rtp_session_schedule_bye):
* gst/rtpmanager/rtpsession.h:
Rename a method to better reflect what it really does.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp):
Use method to get the internal SSRC.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_set_property), (rtp_session_get_property):
Add property to congiure the internal SSRC of the session.
Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
Only change the SSRC of the session and reset the internal source when
the SSRC actually changed. See #565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate):
* gst/rtpmanager/rtpsource.h:
When no payload was specified on the caps but there was a clock-rate,
assume the clock-rate corresponds to the first payload type found in the
RTP packets. Fixes#565509.
Original commit message from CVS:
Patch by: Arnout Vandecappelle <arnout at mind dot be>
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last outgoing timestamp and of the last sender-side
time. Timestamps can only go forward if they do at the sender
side, can only go back if they do at the sender side, and remain the
same if they remain the same at the sender side. Fixes#565319.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (obtain_source),
(rtp_session_create_source), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye):
Make obtain_source return an aditional ref so that we don't lose our ref
to it when a session cleanup occurs when we are emiting a signal.
Emit the on_new_ssrc signal for the CSRC, not the SSRC.
Fixes#562319.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_reset_sync),
(gst_rtp_bin_clear_pt_map):
Reset the sync parameters when clearing the payload type map too.
Fixes#562312.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (get_client),
(gst_rtp_bin_reset_sync), (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream),
(gst_rtp_bin_class_init), (new_ssrc_pad_found):
* gst/rtpmanager/gstrtpbin.h:
Remove a lot of per stream state that is not needed and pass new info in
the method call.
Add signal to reset sync parameters.
Avoid parsing the caps to get a clock_base, we get this from the sync
signal now.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_set_property),
(rtp_session_get_property):
Add property to configure the RTCP MTU.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(copy_source), (rtp_session_create_sources),
(rtp_session_get_property):
Add G_PARAM_STATIC_STRINGS.
Add property to return a GValueArray of all known RTPSources in the
session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_create_sdes), (rtp_source_set_property),
(rtp_source_get_property):
Remove properties to set the various SDES items, an application is never
supposed to change the RTPSource data.
Change the SDES getter properties to one SDES property that returns all
SDES items in a GstStructure.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_release_pad):
Release the right pads on rtpbin. Fixes#561752.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (get_current_times),
(rtcp_thread), (gst_rtp_session_chain_recv_rtp):
Pass the running time to the session when processing RTP packets.
Improve the time function to provide more info.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (update_arrival_stats),
(rtp_session_process_rtp), (rtp_session_process_sdes),
(rtp_session_process_rtcp), (session_start_rtcp),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Mark the internal source with a flag.
Use running_time instead of the more useless timestamp.
Validate a source when a valid SDES has been received.
Pass the current system time when processing SR packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_create_stats),
(rtp_source_get_property), (rtp_source_send_rtp),
(rtp_source_process_rb), (rtp_source_get_new_rb),
(rtp_source_get_last_rb):
* gst/rtpmanager/rtpsource.h:
Add property to get source stats.
Mark params as STATIC_STRINGS.
Calculate the bitrate at the sender SSRC.
Avoid negative values in the round trip time calculations.
* gst/rtpmanager/rtpstats.h:
Update some docs and change some variable name to more closely reflect
what it contains.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Fix GST_DEBUG call to only have as many arguments as required
by the format string. Fixes a compiler warning.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes#556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtcp_src), (create_send_rtcp_src):
Install event handler on the rtcp_src pad, make LATENCY event return
TRUE.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin-marshal.list:
Add marshaller for new action signal.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_internal_session),
(gst_rtp_bin_class_init):
* gst/rtpmanager/gstrtpbin.h:
Add action signal to retrieve the internal RTPSession object.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_get_property), (gst_rtp_session_release_pad):
Add property to access the internal RTPSession object.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(check_collision):
* gst/rtpmanager/rtpsession.h:
Add action signal to retrieve an RTPSource object by SSRC.
See #555396.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_ssrc_active), (on_ssrc_sdes),
(on_bye_ssrc), (on_bye_timeout), (on_timeout), (on_sender_timeout):
Ref the rtpsource object before we release the session lock when we emit
the signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain):
Do not try to adjust the offset of streams for which we have not yet
seen an SR packet. Avoids large ts-offsets in some cases.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_send_rtcp),
(gst_rtp_session_event_send_rtp_sink):
Send EOS when the session object instructs us to.
* gst/rtpmanager/rtpsession.c: (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible for the session manager to instruct us to send EOS. We
currently will EOS when the session is a sender and when the sender part
goes EOS. This is not entirely correct behaviour because the session
could still participate as a receiver.
Fixes#549409.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (new_ssrc_pad_found):
Reset rtp timestamp interpollation when we detect a gap when the
clock_base changed.
Don't try to adjust the ts-offset when it's too big (> 3seconds)
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_set_ssrc):
* gst/rtpmanager/gstrtpsession.h:
Add method to set session SSRC.
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_set_internal_ssrc), (rtp_session_get_internal_ssrc),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Added debugging for the collision checks.
Add method to change the internal SSRC of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Reset the clock base when we detect large jumps in the seqnums.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
Print the pad-name in debug log.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
Use "-" instead of "_" in property names. Can we call them just
"device" like everywhere else?
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes#546312.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (get_pt_map):
Release lock before emitting the request-pt-map signal.
Fixes#543480.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (gst_rtp_session_send_rtcp),
(gst_rtp_session_sync_rtcp), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_chain_recv_rtcp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_send_rtp):
* gst/rtpmanager/rtpsource.c: (push_packet), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp):
Changed some GST_DEBUG() to GST_LOG() to reduce the spam when a
pipeline is running normally.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rtcp), (rtp_session_send_rtp),
(rtp_session_send_bye_locked), (rtp_session_send_bye),
(rtp_session_next_timeout), (session_report_blocks), (session_cleanup),
(is_rtcp_time), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Do not mix the use of g_get_current_time() with gst_clock_get_time().
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_init),
(gst_rtp_bin_finalize), (gst_rtp_bin_change_state):
Fix deadlock when shutting down, use a new lock instead to properly
shutdown.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_change_state), (new_payload_found),
(new_ssrc_pad_found):
Break out of callbacks when we are shutting down.
Make sure no state changes can happen when we reconfigure.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_set_property):
Propagate the do-lost and latency properties to the jitterbuffers when
they are changed on rtpbin.
Original commit message from CVS:
* docs/Makefile.am:
Don't attempt to build plugin docs when they're disabled.
* gst/bayer/Makefile.am:
Add libgstvideo to the link.
* gst/rtpmanager/Makefile.am:
Fix link order, and move LIBS things to _LIBS
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_query_send_rtcp_src):
Make sure to unref the rtpsession returned by gst_pad_get_parent() to
prevent a memory leak.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Initialise with GST_CLOCK_TIME_NONE to avoid compiler warning.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_finalize):
Make sure to unref the caps used by RTPSource to prevent a memory leak.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/rtpsession.c: (source_clock_rate),
(rtp_session_process_bye), (rtp_session_send_bye_locked):
Unlock the session lock when calling one of our callbacks.
Fixes#532011.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_stream), (gst_rtp_bin_init),
(gst_rtp_bin_set_property), (gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Expose new jitterbuffer property in rtpbin too.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init), (gst_rtp_jitter_buffer_init),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Disable sending out rtp packet lost events by default and make a
property to enabe it. We will likely enable it by default when the base
depayloaders have a default handler for them so that we don't send these
events all through the pipeline for now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_src_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Remove private version of a function that is in -base now.
Add src event handler.
Rework the jitterbuffer pushing loop so that it can quickly react to
lost packets and instruct the depayloader of them. This can then be used
to implement error concealment data.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_query_send_rtcp_src), (create_recv_rtcp_sink),
(create_send_rtcp_src):
Set up some internal links functions for the RTCP and sync pads because
the defaults are really not correct.
Implement a query handler for the RTCP src pad, mostly to correctly
report about the latency.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain):
* gst/rtpmanager/rtpsession.c: (update_arrival_stats),
(rtp_session_process_sr), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Also keep track of the first buffer timestamp together with the first
RTP timestamp as they both are needed to construct the timing of
outgoing packets in the jitterbuffer and are therefore also needed to
manage lip-sync. This fixes lip-sync if the first RTP packets arrive
with a wildly different gap.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_session):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_finalize):
Avoid leaking pads in the RTP manager.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop):
Use extended timestamp to release buffers from the jitterbuffer so that
we can handle the rtp wraparound correctly.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Improve Comments.
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state), (gst_rtp_session_parse_caps),
(gst_rtp_session_clock_rate), (gst_rtp_session_sink_setcaps),
(gst_rtp_session_event_send_rtp_sink), (create_recv_rtp_sink),
(create_send_rtp_sink):
Also parse the sink caps for clock-rate instead of only relying on the
result of the signal.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Make sure we fetch the clock rate for payloads we are sending out so
that we can use it for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state),
(gst_rtp_session_event_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Distribute synchronisation parameters to the session manager so that it
can generate correct SR packets for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_base_time),
(rtp_session_set_timestamp_sync), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Add methods for setting sync parameters.
Set correct RTP time in SR packets using the sync params.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Record last RTP <-> GST timestamp so that we can use them to convert NTP
to RTP timestamps in SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_clear_pt_map):
Add some more advanced example pipelines.
* gst/rtpmanager/gstrtpsession.c: (rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_send_rtcp):
Add some debug and FIXME.
Release LOCK when performing session cleanup.
* gst/rtpmanager/rtpsession.c: (session_report_blocks):
Add some debug.
* gst/rtpmanager/rtpsource.c: (calculate_jitter),
(rtp_source_send_rtp):
Make sure we always send RTP packets with the session SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query):
When synchronizing buffers, take peer latency into account.
Don't try to add our latency to invalid peer max latency values.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpclient.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpsession.h:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/rtpmanager/gstrtpssrcdemux.h:
Rename all GstRTPFoo structs to GstRtpFoo so that GST_BOILERPLATE
registers a GType that's different than the GstRTPFoo types that
farsight registers (luckily GType names are case sensitive). Should
finally fix#430664.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_set_property):
When drop-on-latency is set but we have no latency configured, just push
the buffer as fast as possible.
Fix typo in comment.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_sink_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix EOS handling.
Convert some DEBUG into WARNINGs.
Pause task when flushing.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(rtcp_thread), (gst_rtp_session_event_recv_rtcp_sink):
Use system clock for RTCP session management timeouts.
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_bye_ssrc), (on_bye_timeout), (on_timeout):
Release the session lock when emiting signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
Add some debug info.
* gst/rtpmanager/rtpsession.c: (rtp_session_init),
(rtp_session_send_rtp):
Store real user name in the session.
Original commit message from CVS:
* gst/rtpmanager/async_jitter_queue.c: (signal_waiting_threads),
(async_jitter_queue_pop_intern_unlocked):
Fix the case where the buffer underruns and does not block.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_base_init),
(create_recv_rtcp), (create_send_rtp), (create_rtcp),
(gst_rtp_bin_request_new_pad):
Rename RTCP send pad, like in the session manager.
Allow getting an RTCP pad for receiving even if we don't receive RTP.
fix handling of send_rtp_src pad.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
When no pt map could be found, fall back to the sinkpad caps.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Fix pad names.
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_create_source), (rtp_session_process_sr),
(rtp_session_send_rtp), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Unlock session when performing a callback.
Add callbacks for the internal session object.
Fix sending of RTP packets.
first attempt at adding NTP times in the SR packets.
Small debug and doc improvements.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Update stats for SR reports.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst/rtpmanager/gstrtpbin.c: (create_stream),
(gst_rtp_bin_class_init), (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Make default jitterbuffer latency configurable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Debuging cleanups.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_finalize):
Don't use GLib-2.10 API, we only require GLib 2.8 at the moment.
Original commit message from CVS:
* configure.ac:
Disable rtpmanager for now because it depends on CVS -base.
* gst/rtpmanager/Makefile.am:
Added new files for session manager.
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(create_stream), (pt_map_requested), (new_ssrc_pad_found):
Some cleanups.
the session manager can now also request a pt-map.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_base_init),
(gst_rtp_session_class_init), (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread), (start_rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_process_rtp), (gst_rtp_session_send_rtp),
(gst_rtp_session_send_rtcp), (gst_rtp_session_clock_rate),
(gst_rtp_session_get_time), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_recv_rtcp_sink),
(gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_send_rtcp_src),
(gst_rtp_session_request_new_pad):
* gst/rtpmanager/gstrtpsession.h:
We can ask for pt-map now too when the session manager needs it.
Hook up to the new session manager, implement the needed callbacks for
pushing data, getting clock time and requesting clock-rates.
Rename rtcp_src to send_rtcp_src to make it clear that this RTCP is to
be send to clients.
Add code to start and stop the thread that will schedule RTCP through
the session manager.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_new_ssrc), (on_ssrc_collision), (on_ssrc_validated),
(on_bye_ssrc), (rtp_session_new), (rtp_session_set_callbacks),
(rtp_session_set_bandwidth), (rtp_session_get_bandwidth),
(rtp_session_set_rtcp_bandwidth), (rtp_session_get_rtcp_bandwidth),
(source_push_rtp), (source_clock_rate), (check_collision),
(obtain_source), (rtp_session_add_source),
(rtp_session_get_num_sources),
(rtp_session_get_num_active_sources),
(rtp_session_get_source_by_ssrc),
(rtp_session_get_source_by_cname), (rtp_session_create_source),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye),
(rtp_session_process_app), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_get_rtcp_interval),
(rtp_session_produce_rtcp):
* gst/rtpmanager/rtpsession.h:
The advanced beginnings of the main session manager that handles the
participant database of RTPSources, SSRC probation, SSRC collisions,
parse RTCP to update source stats. etc..
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_finalize), (rtp_source_new),
(rtp_source_set_callbacks), (rtp_source_set_as_csrc),
(rtp_source_set_rtp_from), (rtp_source_set_rtcp_from),
(push_packet), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_process_bye),
(rtp_source_send_rtp), (rtp_source_process_sr),
(rtp_source_process_rb):
* gst/rtpmanager/rtpsource.h:
Object that encapsulates an SSRC and its state in the database.
Calculates the jitter and transit times of data packets.
* gst/rtpmanager/rtpstats.c: (rtp_stats_init_defaults),
(rtp_stats_calculate_rtcp_interval), (rtp_stats_add_rtcp_jitter):
* gst/rtpmanager/rtpstats.h:
Various stats regarding the session and sources.
Used to calculate the RTCP interval.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
Some more custom marshallers.
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(clock_rate_request), (create_stream), (gst_rtp_bin_class_init),
(pt_map_requested), (new_ssrc_pad_found), (create_recv_rtp):
* gst/rtpmanager/gstrtpbin.h:
Prepare for caching pt maps.
Connect to signals to collect pt maps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add request_clock_rate signal.
Use scale insteat of scale_int because the later does not deal with
negative numbers.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_class_init),
(gst_rtp_pt_demux_chain):
* gst/rtpmanager/gstrtpptdemux.h:
Implement request-pt-map signal.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_init), (gst_rtp_bin_provide_clock):
* gst/rtpmanager/gstrtpbin.h:
Provide a clock.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Add some debug and comments.
Fix double unref() in error cases.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
sizeof("foo") includes the string's NUL-terminator in the size returned,
but we're writing strings here with an explicit size at the beginning
and no NUL-terminator. In most cases using sizeof("foo") as length in
memcpy is not harmful, but it is where the string goes right at the
end of our buffer to write, since we don't allocate space for that
NUL terminator.
These filters use information from previous frames to
generate the current frame and a caps change will make
the effect start from the beginning again.
This produces a water ripple effect on the video input,
based on motion or a rain drop algorithm.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588695.
This combines the StreakTV and BaltanTV filters from the
effectv project.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588368.
This filter adds a radiation-like motion blur effect
to the video stream.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588359.
This filter binarizes input frames and combines them with various
optical pattern.
Kindly relicensed to LGPL2+ by Kentaro Fukuchi <fukuchi@megaui.net>.
Fixes bug #588349.
When blending a source layer with an alpha of 'a' on top of another
destination layer we take the sum of:
* 'a' percent of the source layer
* (100 - 'a') percent of the destination layer (the remainder)
Once buffering has started (with an mdat atom), continue buffering
until moov atom is reached, which handles cases with multiple
mdat atoms. Also keep adapter/offset better in sync with upstream
and fix some debug statements. Fixes#587426.
This reverts commit 5503a59a57.
Reverting this since it causes regressions with a lot of sample files
I have, all of which worked fine with the last -good release (#586891).
Whenever we alloc something based on a user-supplied size, we should
really use g_try_new(), otherwise we can easily be made to abort by
passing a ridiculously large number to us for allocing. Fixes
problems with some fuzzed files.
Check the possibly 64-bit atom size more carefully before casting it
to an int and passing it to gst_pad_pull_range(), otherwise we might
end up pulling 0 bytes, getting an empty buffer as requested and
dereferencing not available data whilst thinking we actually asked
for and got 0x1000000000000 bytes. Similar fix for push mode operation
where neededbytes ends up being 0 bytes, which makes us assert. Fixes
crash with broken or fuzzed file (NB #122378).
Fix the caps to include the depth (instead of width twice) in the caps of
audio/x-raw-int.
Fix negotiation to not only copy the rate/channels of the first structure.
Don't call gst_avi_demux_src_convert() for each single index entry. Not
only do we already have the pointer to the stream context, we also know
the formats we want to convert from and to already, so we may just as
well use optimised conversion routines that bypass some of the checks
and lookups made in gst_avi_demux_src_convert().
Include the header from where we include all the system headers with the
socket stuff before we try to define EAI_ADDRFAMILY ourselves, otherwise
we define it ourselves and then get a compiler warning if a system header
defines it as well without guarding against it being defined already.
Don't leak buffers when resyncing to a keyframe.
Avoid leaking buffers when exiting the loop on error conditions.
Add some more debug info.
Fixes#585911
The previous patch to add support for additional sample formats possibly
introduced a reentrancy bug: a variable used for a loop index was declared
static. This patch fixes that, and also adds a "/* *INDENT-ON* */" annotation
following the macro block. (I don't know what the annotation is for, but the
adder, where I copied this from, has it).
Setting it to a value<16 would cause crashes before because
current_plane was set to the old number of planes-1. Also
fix calculations for non-2^n planes values.
The diff is a signed integer, not an unsigned one of course.
In modes other than GST_DEINTERLACE_ALL every frame has twice the
duration of the field duration.
When there are less timestamps that there are samples, fill up the sample table
with the last know timestamp. This situation can happen when the last sample
does not decode and doesn't need a timestamp. We however calculate the total
track length using the last sample timestamp so we need to have something
sensible in there.
Fixes#585056
in24 samples are normally big-endian but an enda box can change this to
little-endian. Recurse into the in24 box and find the enda box so that we get
the endianness right.
Fixes#582515
gst_adapter_take_buffer doesn't allow buffer to be empty.
Simply skip any part where the content is empty. Don't
create a pad for it either.
See #582169
Original commit message from CVS:
* gst/y4m/gsty4mencode.c: (gst_y4m_encode_init),
(gst_y4m_encode_setcaps):
* tests/check/elements/y4menc.c: (GST_START_TEST):
Plug some leaks; try to make build bot happy again.
Original commit message from CVS:
* ext/dv/gstdvdec.c:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/y4m/gsty4mencode.c: (gst_y4mencode_sinkconnect):
I'm a bad boy. using /1001. to force C to do float division
and not integer division (as it did in my last commit)
Thanks to David I. Lehn for pointing this mistake.
Original commit message from CVS:
* ext/dv/gstdvdec.c:
* ext/libfame/gstlibfame.c:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/y4m/gsty4mencode.c: (gst_y4mencode_sinkconnect):
replace framerate aproximations by their real value
(24000/1001, 30000/1001, 60000/1001)
Finish fixing bug #164049
Original commit message from CVS:
a52dec: Use a debug category, Output timestamps correctly
Emit tag info, Handle events, tell liba52dec about cpu
capabilities so it can use MMX etc.
dvdec: Fix a crasher accessing invalid memory
dvdnavsrc:Some support for byte-format seeking.
Small fixes for still frames and menu button overlays
mpeg2dec: Use a debug category. Adjust the report level of several items to
LOG. Call mpeg2_custom_fbuf to mark our buffers as 'custom buffers'
so it doesn't lose the GstBuffer pointer
navseek: Add the navseek debug element for seeking back and forth in a
video stream using arrow keys.
mpeg2subt:Pretty much a complete rewrite. Now a loopbased element. May still
require work to properly synchronise subtitle buffers.
mpegdemux:
dvddemux: Don't attempt to create subbuffers of size 0
Reduce a couple of error outputs to warnings.
y4mencode:Output the y4m frame header correctly
Original commit message from CVS:
Remove all config.h includes from header files, add it to each source file and remove duplicate config.h includes from several source files
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
* a hack to work around intltool's brokenness
* a current check for mpeg2dec
* details->klass reorganizations
* an element browser that uses details->klass
* separated cdxa parse out from the avi directory
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
Original commit message from CVS:
s/@GST_PLUGIN_LDFLAGS@/$(GST_PLUGIN_LDFLAGS)/
@-substitued variables variables are defined as make variables automagically,
and this gives the user the freedom to say make GST_PLUGIN_LDFLAGS=-myflag
For this add a "mode" property that defaults to "interlaced" for now as
most decoders/demuxers don't properly set the "interlaced" field on the
caps yet.
If this property is set to "auto" the element will work in passthrough
mode unless the caps contain the "interlaced" field.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_init),
(gst_deinterlace2_set_property), (gst_deinterlace2_get_property):
Bring properties into this century.
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
Fix unused variable compiler warning when not building
X86 assembly.
Original commit message from CVS:
* gst/dccp/gstdccp.c:
* gst/dccp/gstdccpclientsrc.c:
Fix compilation on Solaris by including filio.h as needed.
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
Fix compilation with Forte - apparently it hates concatenating a
macro argument that starts with an underscore??
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
Unroll the loop to handle two bytes at once. This should give
a small speedup and makes it possible to handle chroma and luma
different which is needed later.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_class_init):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/tomsmocompmacros.h:
First part of the C implementation of the tomsmocomp deinterlacing
algorithm. This only supports search-effort=0 currently, is painfully
slow and needs some cleanup later when all search-effort settings
are implemented in C.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_simple_method_interpolate_scanline),
(gst_deinterlace_simple_method_copy_scanline),
(gst_deinterlace_simple_method_deinterlace_frame):
* gst/deinterlace2/tvtime/greedy.c: (deinterlace_frame_di_greedy):
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
* gst/deinterlace2/tvtime/scalerbob.c:
(deinterlace_scanline_scaler_bob):
* gst/deinterlace2/tvtime/tomsmocomp.c: (Fieldcopy):
* gst/deinterlace2/tvtime/weave.c: (deinterlace_scanline_weave),
(copy_scanline):
* gst/deinterlace2/tvtime/weavebff.c: (deinterlace_scanline_weave),
(copy_scanline):
* gst/deinterlace2/tvtime/weavetff.c: (deinterlace_scanline_weave),
(copy_scanline):
Use oil_memcpy() instead of memcpy() as it's faster for the sizes that
are usually used here.
Original commit message from CVS:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx), (gst_deinterlace_method_vfir_class_init):
Implement the VFIR deinterlacing method as simple method.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_simple_method_interpolate_scanline),
(gst_deinterlace_simple_method_copy_scanline),
(gst_deinterlace_simple_method_deinterlace_frame),
(gst_deinterlace_simple_method_class_init),
(gst_deinterlace_simple_method_init):
* gst/deinterlace2/gstdeinterlace2.h:
Add a GstDeinterlaceSimpleMethod subclass of GstDeinterlaceMethod that
can be used by simple deinterlacing methods. They only have to provide
a function for interpolating a scanline or copying a scanline.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_chain):
Respect the latency of the deinterlacing algorithm for the timestamps
of every buffer.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
Add the MMX registers to the clobbered registers only if __MMX__ is
defined.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_methods_get_type), (gst_deinterlace2_set_method),
(gst_deinterlace2_class_init):
Enable tomsmocomp again as the C port will be ready for the next
release.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_init),
(gst_greatest_common_divisor), (gst_fraction_double),
(gst_deinterlace2_getcaps), (gst_deinterlace2_setcaps):
Don't use proxy_getcaps() but implement our own getcaps() function
that doubles/halfs the framerate if all fields should be sent out.
Original commit message from CVS:
* configure.ac:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_methods_get_type), (gst_deinterlace2_set_method),
(gst_deinterlace2_class_init), (gst_deinterlace2_init):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/greedy.c:
(gst_deinterlace_method_greedy_l_class_init):
* gst/deinterlace2/tvtime/greedyh.c:
(gst_deinterlace_method_greedy_h_class_init):
* gst/deinterlace2/tvtime/vfir.c:
(gst_deinterlace_method_vfir_class_init):
Disable the tomsmocomp algorithm for this release as it's buggy
and has no C implementation yet.
Build the deinterlace2 plugin on all architectures but still mark it
as experimental.
Build the x86 inline assembly only if GCC inline assembly is supported
and only on x86 or amd64. Fixes bug #543286.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
Always use the C implementation if width is not a multiple of 4. The
assembly optimized version only handle this and calling the C
implementation for the remaining part doesn't work because it needs
previous calculations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c:
* gst/deinterlace2/tvtime/greedyhmacros.h:
Some cleanup, use 3DNOW instead of TDNOW in macros.
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/tomsmocompmacros.h:
The SSE method in fact only needs MMXEXT, declare it as such.
Original commit message from CVS:
* ext/spc/gstspc.c: (spc_setup):
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
Don't use declarations after statements in the remaining code.
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
Mark internal processing functions as static inline for quite some
speedup as they're used only once and need to get many local variables
passed as parameter.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_get_latency),
(gst_deinterlace2_set_method), (gst_deinterlace2_class_init),
(gst_deinterlace2_push_history), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps), (gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
Include latency of the method in the returned latency.
Fix outputting of all fields, i.e. doubling of the framerate.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_class_init), (gst_deinterlace_method_init),
(gst_deinterlace_method_deinterlace_frame),
(gst_deinterlace_method_get_fields_required),
(gst_deinterlace2_methods_get_type), (_do_init),
(gst_deinterlace2_set_method), (gst_deinterlace2_class_init),
(gst_deinterlace2_child_proxy_get_child_by_index),
(gst_deinterlace2_child_proxy_get_children_count),
(gst_deinterlace2_child_proxy_interface_init),
(gst_deinterlace2_init), (gst_deinterlace2_finalize),
(gst_deinterlace2_chain), (gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_frame_di_greedy),
(gst_deinterlace_method_greedy_l_set_property),
(gst_deinterlace_method_greedy_l_get_property),
(gst_deinterlace_method_greedy_l_class_init),
(gst_deinterlace_method_greedy_l_init):
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C),
(deinterlace_frame_di_greedyh),
(gst_deinterlace_method_greedy_h_set_property),
(gst_deinterlace_method_greedy_h_get_property),
(gst_deinterlace_method_greedy_h_class_init),
(gst_deinterlace_method_greedy_h_init):
* gst/deinterlace2/tvtime/greedyh.h:
* gst/deinterlace2/tvtime/plugins.h:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_set_property),
(gst_deinterlace_method_tomsmocomp_get_property),
(gst_deinterlace_method_tomsmocomp_class_init),
(gst_deinterlace_method_tomsmocomp_init):
* gst/deinterlace2/tvtime/tomsmocomp.h:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir),
(gst_deinterlace_method_vfir_class_init),
(gst_deinterlace_method_vfir_init):
Use a GstObject subtype for the deinterlacing methods and export
the different settings for each deinterlacing method via GObject
properties.
Implement GstChildProxy interface to allow access to the used
deinterlacing method and to allow adjusting the different settings.
Move global variables of the tomsmocomp deinterlacing method into
function local variables to make it possible to use this deinterlacing
method from different instances.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
Support widths that are not a multiply of 4 when using the assembly
optimized greedyh implementations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
Only build the assembly optimized implementations on x86.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/tvtime/tomsmocomp.c: (tomsmocomp_init),
(tomsmocomp_filter_mmx), (tomsmocomp_filter_3dnow),
(tomsmocomp_filter_sse), (deinterlace_frame_di_tomsmocomp):
* gst/deinterlace2/tvtime/tomsmocomp.h:
Remove useless file and mark everything possible as static.
* gst/deinterlace2/tvtime/greedy.c:
* gst/deinterlace2/tvtime/greedyh.c:
Use "_stdint.h" instead of <stdint.h>.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_init):
* gst/deinterlace2/tvtime/greedy.c: (deinterlace_frame_di_greedy):
* gst/deinterlace2/tvtime/greedyh.c:
(deinterlace_frame_di_greedyh):
* gst/deinterlace2/tvtime/speedtools.h:
* gst/deinterlace2/tvtime/speedy.c:
* gst/deinterlace2/tvtime/speedy.h:
* gst/deinterlace2/tvtime/tomsmocomp.c: (Fieldcopy):
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir):
Get rid of speedy.[ch] as we don't use most of it's code anyway
and it doesn't seem to be relicensed to LGPL. Use memcpy() instead
of the speedy memcpy everywhere instead.
* gst/deinterlace2/gstdeinterlace2.h:
Remove many unused declarations.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c: (gst_deinterlace2_src_query):
Divide latency be 2 to convert from fields to frames.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_frame_di_greedy):
Don't use scanlines function from gstdeinterlace2 as it's
not appropiate for this method. Instead implement deinterlace_frame
function by taking the one from greedyh.
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C):
Small fix for the C implementation.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_frame_vfir):
Don't use the scanlines function from gstdeinterlace2 as it's only
used for this method and will be removed. Instead implement
deinterlace_frame function and make it a bit more efficient.
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_set_method),
(gst_deinterlace2_push_history), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps), (gst_deinterlace2_sink_event),
(gst_deinterlace2_change_state), (gst_deinterlace2_src_event),
(gst_deinterlace2_src_query):
Fix coding style and remove scanlines function as it's unused now.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedyh.asm:
* gst/deinterlace2/tvtime/greedyh.c: (greedyDScaler_C),
(deinterlace_frame_di_greedyh), (dscaler_greedyh_get_method):
* gst/deinterlace2/tvtime/greedyhmacros.h:
Add a C implementation for the greedyh deinterlacing method, clean
up the code a bit and mark the SSE version as MMXEXT as it doesn't
require any SSE instructions.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_set_property), (gst_deinterlace2_chain),
(gst_deinterlace2_setcaps):
If we're outputting all fields the framerate has to be doubled.
Set duration on the outgoing buffers.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline_mmxext):
Optimize MMX/MMXEXT implementations a bit by requiring two less
memory accesses and fix the workaround for the missing right shift
on bytes to unset the highest bit of every byte.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmxext):
Remove sfence instruction as it's not needed and actually is an SSE
instruction.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_mmx),
(deinterlace_greedy_packed422_scanline):
Add plain MMX implementation for the greedyl method.
Original commit message from CVS:
* gst/deinterlace2/Makefile.am:
Move the assembly includes to noinst_HEADERS where they belong.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx):
Fix C and MMX implementations a bit more.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline_mmxext),
(deinterlace_greedy_packed422_scanline):
Fix the C implementation to produce correct results and optimize the
MMXEXT implementation.
Handle odd widths and don't read over array boundaries in the MMXEXT
implementation.
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_c),
(deinterlace_line_mmx), (deinterlace_scanline_vfir):
Fix a small rounding bug in the MMX implementation, the MMX
implementation doesn't actually need MMXEXT instructions so don't mark
it as such.
Handle odd widths in both implementations.
Original commit message from CVS:
* gst/deinterlace2/tvtime/greedy.c:
(deinterlace_greedy_packed422_scanline_sse),
(deinterlace_greedy_packed422_scanline_c),
(deinterlace_greedy_packed422_scanline):
Implement a C version of the greedy low motion algorithm and mark the
assembly optimized version as SSE as it uses SSE instructions
additional to MMX instructions.
Original commit message from CVS:
* gst/deinterlace2/tvtime/vfir.c: (deinterlace_line_mmxext),
(deinterlace_line_c), (deinterlace_scanline_vfir):
Make it possible to use the vfir method on X86 CPUs without MMXEXT too
but use the MMXEXT optimized code whenever possible.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace2_class_init), (gst_deinterlace2_init),
(gst_deinterlace2_reset_history), (gst_deinterlace2_reset),
(gst_deinterlace2_finalize), (gst_deinterlace2_chain),
(gst_deinterlace2_sink_event), (gst_deinterlace2_change_state),
(gst_deinterlace2_src_query):
* gst/deinterlace2/gstdeinterlace2.h:
Reset element state on PAUSED->READY properly, don't leak any buffers
when finalizing, allocate buffers with gst_pad_alloc_buffer() and
properly return flow returns from gst_pad_push() instead of ignoring them.
