The only job of the event peer probe is to catch the upcoming caps event
and be able to react with the sink change. All other events that are
passing the pad shall be passed and ignored.
Since the probe is a blocking probe, there is no use in returning
with GST_PAD_PROBE_OK on other events. Otherwise the event would just
be blocked.
Since we are handling the probe removal of the probe already in the
event switch, we can remove the second explicit probe removal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
There is a race condition where transfer has not been submitted yet while the
request is cancelled which leads to the transfer state going back to
`DOWNLOAD_REQUEST_STATE_OPEN` and the user of the request to get signalled about
its completion (and the task actually happening after it was cancelled) leading
to assertions and misbehaviours.
To ensure that this race can't happen, we start differentiating between the
UNSENT and CANCELLED states as in the normal case, when entering `submit_request`
the state is UNSENT and at that point we need to know that it is not because
the request has been cancelled.
In practice this case lead to an assertion in
`gst_adaptive_demux2_stream_begin_download_uri` because in a previous call to
`gst_adaptive_demux2_stream_stop_default` we cancelled the previous request and
setup a new one while it had not been submitted yet and then got a `on_download_complete`
callback called from that previous cancelled request and then we tried to do
`download_request_set_uri` on a request that was still `in_use`, leading to
something like:
```
#0: 0x0000000186655ec8 g_assert (request->in_use == FALSE)assert.c:0
#1: 0x00000001127236b8 libgstadaptivedemux2.dylib`download_request_set_uri(request=0x000060000017cc00, uri="https://XXX/chunk-stream1-00002.webm", range_start=0, range_end=-1) at downloadrequest.c:361
#2: 0x000000011271cee8 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_begin_download_uri(stream=0x00000001330f1800, uri="https://XXX/chunk-stream1-00002.webm", start=0, end=-1) at gstadaptivedemux-stream.c:1447
#3: 0x0000000112719898 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_load_a_fragment [inlined] gst_adaptive_demux2_stream_download_fragment(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:0
#4: 0x00000001127197f8 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_load_a_fragment(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:1969
#5: 0x000000011271c2a4 libgstadaptivedemux2.dylib`gst_adaptive_demux2_stream_next_download(stream=0x00000001330f1800) at gstadaptivedemux-stream.c:2112
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5435>
To offer the possibility to get information at plugin
level and get it from the registry, all the
full features are now registered in 'fullstaticfeatures'
meta plugin instead of NULL plugin.
In the case of gst-inspect, the features were not displayed
at plugin level because it was a NULL plugin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5421>
Back in the mists of time[1], we switched `giostream*` elements to not close the
stream on stop() so that applications that needed a handle to the stream after
the element stopped had it.
Unfortunately, we also have cases[2] where waiting for the element to be
finalized is too late for the stream to be closed.
In order to not change the behaviour of the element, we add a property to allow
users to select the desired behaviour.
[1]: https://bugzilla.gnome.org/show_bug.cgi?id=587896
[2]: gst-plugins-rs#423
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5372>
Formatters might call "loaded" from the `gessrc` streaming thread
meaning that the `->formatters` field need to be protected.
Several other APIs are called from gesbasedemux, in some radom
thread, so we should ensure that this is all MT. safe, and the API
makes it simple.
Co-authored-by: Philippe Normand <philn@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5431>
By using the gst_caps_set_simple() to set the format on all structures, the
compositor may create invalid combinations as the caps may contain passthrough
caps. Avoid this issue by intersecting the resul with its original.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5386>
Adds list of formats that should be used by element in needs to passthrough
video. It contains the full list of video format plus DMA_DRM format
and will be extended in the future as needed. This patches includes 3 new
symbols:
- GST_VIDEO_FORMATS_ANY_STR
- GST_VIDEO_FORMATS_ANY
- gst_video_formats_any()
The last one can be used by bindings or for code that prefers having
GstVideoFormat values instead of strings.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5386>
This commit ports functionality from the `rtpsrc` to make the `ristsrc`
work with dynamic payload types.
It adds two properties:
- `caps`
- `encoding-name`
These can be used to make the `ristsrc` receive other payload types than
the MPEG TS one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5422>
When using parallel:matrix variables, only the value of the
variable is shown in the Gitlab GUI and thus we end up with
a job name resembling "build fedora gcc: [both, true]".
Pass down the whole string/arguments as the matrix variable
values so that we will have a bit more context.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4698>
Some options got enabled by default since that commit:
40371ff9c6
While the commit message example makes perfect sense to enable `bad` by
default, I don't think the same reasoning applies to libav, devtools,
ges and rtsp_server.
I think it is important to keep a build with `-Dauto_features=disabled`
minimal, especially not pulling external dependencies. For example, with
libav being enabled by default, Meson builds FFmpeg subproject even
when disabling auto features.
It is fine to keep `bad` enabled by default because itself has auto
features for every plugins, when auto features are disabled it only
build libraries that does not have external deps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5337>
While the suspend modes NONE and PAUSED provided a low startup latency
for connecting clients they did not ensure that streams started on
fresh data.
With this property we can maintain the low startup latency of those
suspend modes while also ensuring that a stream starts on a key unit.
Furthermore, by modifying the value of a new property,
ensure-keyunit-on-start-timeout, it is possible to accept a keyunit of
a certain age but discard it if too much time has passed and instead
force a new keyunit.
Fixes#2443
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4334>
The counter was using a signed 8 bit integer, which was overflowing
after 127 entries. That was then passed as an unsigned 32 bit integer to
libflac, which caused it to be converted to a huge unsigned number.
That then caused an invalid memory access inside libflac.
As a bonus, signed integer overflow is undefined behaviour.
Instead, use an unsigned 8 bit integer. Once this overflows the existing
code already catches it and stops adding the cue. While FLAC__metadata_object_cuesheet_insert_track()
takes an unsigned 32 bit integer for the track number, FLAC__StreamMetadata_CueSheet_Track is
limiting it to an unsigned 8 bit integer.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2921
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5420>
Since DXVA does not support some profiles such as HEVC RExt,
vendor specific decoding API is still required.
When decoder is negotiated with d3d11 caps, decoder will convert
semi-planar frame to planar since semi-planar format (e.g.,
DXGI_FORMAT_NV12) is not supported by CUDA/D3D11 interop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5409>
Found that osxaudiosink could not be added standalone in gst-full build
using
-Dgst-full-elements=osxaudio:osxaudiosink because element registration
was
done at the plugin level. Now src/sink elements and deviceprovider have
their
individual registration.
Copied/adapted from the alsa plugin.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5419>
Use gst_codec_utils_caps_get_mime_codec() in pbutils for codec
strings. That function gives more elaborate RFC 6381 compatible
strings than the helper functions in gstmdphelper.c, such as
"avc1.F4000D".
Remove the helper functions, as they were only used from dashsink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5404>
