Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_async_enabled),
(gst_base_sink_set_ts_offset), (gst_base_sink_perform_qos):
Add some debug.
Make sure we don't generate invalid QoS messages.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position):
The reported position must always be smaller than the last seen
timestamps (or timestamp + duration for reverse).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position_last), (gst_base_sink_get_position):
Fix position query range checks in reverse playback.
Original commit message from CVS:
Based on patch by: Bjarne Rosengren <bjarne at axis dot com>
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Make sending an EOS event to the basesrc non-blocking even if the
implementation does blocking waits in the create function. This is done
by unlocking the create function when EOS is sent.
Fixes#535218.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
If nothing else can be used, use the last buffer's start time as
the segment's last stop. Fixes bug #534258.
Original commit message from CVS:
Patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Unref events that the GstBaseTransform::event vfunc didn't want to
have forwarded by the base class. Closes a leak in identity.
Fixes bug #446763.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_adjust_time),
(gst_base_sink_wait_clock), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked):
Refactor adjusting the running_time with latency and offset into a
separate method.
When doing clipping, we still want to use the subclass get_times method,
just in case the DURATION or TIMESTAMP are not set.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_start):
Use right error code when typefinding fails, so we can use
the default (translated) error messages.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_start):
When the subclass did not set caps on outgoing buffers, configure the
caps we negotiated on the source pad.
When the typefind helper does not find caps, error out properly instead
of doing things with NULL caps.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Sort buffer cache list by end offsets. This makes sure that we don't
stop to search for a cached buffer that contains the requested data
too early.
Also read a minimum of 4k bytes instead of 512 bytes as this is a bit
more efficient. Fixes bug #459862.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check the caps of the buffer returned by gst_pad_alloc_buffer() and
fall back to default negotiation in the chain function if the caps
are different from what was requested. Fixes bug #526768.
Original commit message from CVS:
Based on a patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't passthrough buffer allocation too easily if the caps change.
This breaks when working in passthrough mode and upstream changes
it's caps. Fixes bug #526768.
Original commit message from CVS:
* libs/gst/check/Makefile.am:
Don't add an explicit link to libgstreamer-0.10.la; it's already
included in GST_OBJ_LIBS.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_send_event):
Rearrange the latency query code. We always want to do the upstream
query, even if we are not live so that the upstream elements can get the
latency results too. If we fail doing the query and we are live, we
return TRUE afterwards.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* docs/gst/gstreamer-docs.sgml:
* docs/gst/gstreamer-sections.txt:
* gst/gstparamspecs.c:
* gst/gstparamspecs.h:
Add GST_PARAM_CONTROLLABLE and GST_PARAM_USER_SHIFT. Move paramspec
docs to own section.
* gst/gstvalue.c:
This now only documents GValue.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.h:
Remove GST_PARAM_CONTROLLABLE.
Original commit message from CVS:
Patch by: Kwang Yul Seo <kwangyul.seo gmail com>
* libs/gst/net/gstnettimepacket.h:
* docs/libs/gstreamer-libs-sections.txt:
Define socklen_t as int if it's not defined yet. Fixes compilation
with MSVC6 and other versions where socklen_t is not defined in
the windows headers (#518022).
Original commit message from CVS:
* docs/design/part-buffering.txt:
Fix some typos and set the estimated total for push mode to -1.
* gst/gstquery.c: (gst_query_new_buffering):
Set buffering-left to 0 as we're not buffering by default.
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
Implement BUFFERING query.
Original commit message from CVS:
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free),
(gst_interpolation_control_source_set_internal):
Use GSlice for allocating the control points.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Also unset the GAP flag on buffers if we're working inplace but
the element is not GAP-aware.
Mark a comment as FIXME 0.11.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_packet_from_event_1_0):
When calculating GDP body CRC, use the correct pointer.
Fixes part of #522401.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/gstclock.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.c:
* libs/gst/check/gstcheck.c:
Small documentation fixes. Fixes#523978.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås
<ole dot andre dot ravnas at tandberg dot com>
* docs/gst/gstreamer-sections.txt:
* gst/gstpoll.c: (find_index), (gst_poll_free_winsock_event),
(gst_poll_update_winsock_event_mask), (gst_poll_new),
(gst_poll_free), (gst_poll_fd_init), (gst_poll_add_fd_unlocked),
(gst_poll_remove_fd), (gst_poll_fd_ctl_write),
(gst_poll_fd_ctl_read_unlocked), (gst_poll_fd_has_closed),
(gst_poll_fd_has_error), (gst_poll_fd_can_read_unlocked),
(gst_poll_fd_can_write), (gst_poll_wait),
(gst_poll_set_controllable), (gst_poll_restart),
(gst_poll_set_flushing):
* gst/gstpoll.h:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_start),
(gst_net_time_provider_new):
* plugins/elements/gstfdsink.c: (gst_fd_sink_start):
* plugins/elements/gstfdsrc.c: (gst_fd_src_start):
* tests/benchmarks/gstpollstress.c: (main):
* tests/check/gst/gstpoll.c: (GST_START_TEST), (gst_poll_suite):
Remove GstPollMode from the API, it does not make sense to let the
application control this.
Add support for Win32.
Fix the testsuite. Fixes#520671.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_drop_buffers),
(gst_check_element_push_buffer_list):
* libs/gst/check/gstcheck.h:
Make the declaration in the header for
gst_check_element_push_buffer_list match the implementation.
Fix up spelling, grammar and wording of the documentation in a few
places, and add the Since keyword to new API functions.
Use g_list_delete_link instead of g_list_remove in
gst_check_drop_buffers, since it's immeasurably more efficient.
* tests/check/elements/fakesrc.c: (GST_START_TEST):
Use new gst_check_drop_buffers function where appropriate.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new symbols gst_collect_pads_take_buffer,
gst_collect_pads_read_buffer, gst_index_set_resolver_full to the
exports
Changelog surgery to add API keyword to new gst_check API.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Add more functions for unit testing: gst_check_drop_buffers,
gst_check_caps_equal, gst_check_element_push_buffer_list,
gst_check_element_push_buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop),
(gst_base_sink_get_position_paused):
Add fixme regarding EOS in pull mode.
Fix position reporting in PAUSED for negative rates.
Original commit message from CVS:
* gst/gst.c:
_gst_trace_on is already provided by gsttrace.h, no need to declare
it ourselves.
* docs/libs/gstreamer-libs-sections.txt:
Add 'buffers', 'check_cond' and 'check_mutex' from libgstcheck
and remove strange tcase_add_test which is outputting a warning.
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Properly declare 'buffers', 'check_cond', 'check_mutex' extern
and define them in gstcheck.c instead of having every .c file whcih
includes gstcheck.h be defining its own copy and relying on symbol
interposing to marry them all, which doesn't work on Solaris.
* tests/check/elements/identity.c: (GST_START_TEST):
Don't define 'buffers' locally, it comes from libgstcheck.
* tests/check/generic/sinks.c: (send_buffer):
Fix type of variable (GstFlowReturn, not GstStateChangeReturn)
* tests/check/gst/gststructure.c: (GST_START_TEST):
* tests/check/gst/gstsystemclock.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Add a bunch of casts to make various constants fit the types
they're being assigned to.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop):
The start segment for reverse playback goes from start to last_stop.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_size):
Print element name with g_warning() if there's a problem
with the unit size.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek),
(gst_base_src_loop):
Don't update the last_stop position in do_seek, that's the position we
did a seek to.
Read backwards when we have a negative rate.
* tests/check/elements/filesrc.c: (event_func), (wait_eos),
(setup_filesrc), (cleanup_filesrc), (GST_START_TEST),
(filesrc_suite):
Add check for reverse reading.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj axis com>
* libs/gst/check/gstcheck.h:
Fix detection of the check version we're compiling against (would
otherwise break if check goes v0.10.0); correctly report the
name of the failed test again in case of failure, instead of
just 'tf' (fixes#504499).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Allow sending EOS to the source to make it send out an EOS event from
the streaming thread.
Update docs and deprecate the old NULL/READY shutdown method.
* tests/check/libs/basesrc.c: (GST_START_TEST),
(gst_basesrc_suite):
Add unit test for controlled shutdown.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_perform_seek), (gst_base_src_get_range),
(gst_base_src_set_playing), (gst_base_src_change_state):
Make _wait_playing() not check any variables so that we can call this
function from subclasses. Move the checks elsewhere similar to
_wait_preroll() in basesink.
Add some debugging.
Only signal the LIVE cond when we are going back to PLAYING.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_set_gap_aware):
* libs/gst/base/gstbasetransform.h:
API: Add gst_base_transform_set_gap_aware() to control whether
the element correctly handles GST_BUFFER_FLAG_GAP or shouldn't
get buffers with this flag at all. Fixes#503231.
Original commit message from CVS:
* Makefile.am:
Add check-exports target and run it as part of 'make check'
(see #499140 and #493983).
* gst/gst_private.h:
* gst/gstelementfactory.h:
* gst/gstghostpad.c: (gst_proxy_pad_class_init):
* gst/gstinfo.c: (_priv_gst_in_valgrind), (_gst_debug_init),
(_priv_gst_in_valgrind):
* gst/gstinfo.h: (GstLogFunction):
* gst/gsttypefind.c: (type_find_debug), (GST_CAT_DEFAULT),
(gst_type_find_register):
* gst/gsttypefindfactory.c: (type_find_debug), (GST_CAT_DEFAULT),
(gst_type_find_factory_get_type):
* libs/gst/controller/gstcontroller.c: (GST_CAT_DEFAULT),
(GST_CAT_DEFAULT), (parent_class), (priv_gst_controller_key),
(gst_controller_new_valist), (gst_controller_new_list),
(_gst_controller_dispose), (_gst_controller_class_init):
* libs/gst/controller/gstcontrolsource.c: (GST_CAT_DEFAULT):
* libs/gst/controller/gsthelper.c: (GST_CAT_DEFAULT),
(GST_CAT_DEFAULT), (gst_object_uncontrol_properties),
(gst_object_get_controller), (gst_object_set_controller),
(gst_object_suggest_next_sync), (gst_object_sync_values),
(gst_object_set_control_source), (gst_object_get_control_source),
(gst_object_get_value_arrays), (gst_object_get_value_array),
(gst_object_get_control_rate), (gst_object_set_control_rate):
* libs/gst/controller/gstinterpolation.c: (GST_CAT_DEFAULT):
* libs/gst/controller/lib.c: (GST_CAT_DEFAULT):
Make some functions that should be static static; rename some
private symbols so that they don't get exported; add some FIXME
comments so we can move accidentally exported functions into
our private section in 0.11.
* win32/common/libgstreamer.def:
Add gst_utils_get_timestamp().
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* gst/gstdebugutils.c:
* gst/gstinfo.c:
* gst/gstutils.c:
* gst/gstutils.h:
* libs/gst/base/gstbasesink.c:
* tools/gst-launch.c:
Change GST_GET_TIMESTAMP into gst_util_get_timestamp and replace all
uses as we don't have HAVE_POSIX_TIMERS in public headers.
Thanks Tim for spotting.
Original commit message from CVS:
* gst/gstevent.c:
Little documentation improvment.
* gst/gstpreset.c:
More TODO cleanups. Remove c++ comments.
* libs/gst/controller/gstcontroller.c:
Add TODO and use quark from static string.
* tests/check/gst/gstmessage.c:
* tests/check/gst/gststructure.c:
Use quark from static string.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_last_buffer):
Don't hold the object lock when unreffing a buffer because it could
cause a deadlock when the finalize function wants to grab the object
lock too. Fixes#495133.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes#494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query),
(gst_base_src_perform_seek), (gst_base_src_default_event),
(gst_base_src_set_flushing), (gst_base_src_activate_push),
(gst_base_src_activate_pull):
Unify flushing code, remove some old unlock code that is no longer used.
Take the streaming lock when seeking to avoid races. Fixes#492729.
Added some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/gsttrace.c:
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_new):
* libs/gst/net/gstnettimepacket.c: (gst_net_time_packet_send):
* libs/gst/net/gstnettimeprovider.c: (gst_net_time_provider_new):
Fix a couple of missing includes for MSVC2005 and a C99 issue. Also,
starting with 2.14.0, GLib won't provide a pipe() macro any longer,
so use _pipe() directly (#492077).
* win32/common/dirent.c: (_treaddir):
Add a couple of casts to make it build without warnings with MSVC.
* win32/common/libgstreamer.def:
Add some more symbols that need to be exported.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
Reset last seen position after flushing so that we don't report the old
position anymore.
Original commit message from CVS:
* configure.ac:
* libs/gst/check/Makefile.am:
Use a custom export symbol regex for libgstcheck, as it needs
to export symbols that don't match the standard GStreamer gst_*
pattern, and --export-dynamic is not portable (only works on
GNU ld)
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
Make sure to pass a message parameter to the fail_* macros.
* tests/check/gst/gstinfo.c: (GST_START_TEST):
Fix some compiler warnings.
Original commit message from CVS:
* libs/gst/check/gstcheck.c:
* libs/gst/check/gstcheck.h:
Allow runtime selection of unit tests to run via the GST_CHECKS
environment variable (test case function names, comma-separated).
Original commit message from CVS:
Patch inspired by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_eos),
(gst_base_sink_event):
* libs/gst/base/gstbasesink.h:
Add function to wait for EOS, subclasses can use this to correctly wait
for devices to drain before performing the EOS logic. Fixes#485343.
API: gst_base_sink_wait_eos()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_needs_preroll), (gst_base_sink_chain_unlocked):
When we received EOS and are waiting for when to post the EOS message,
our state is prerolled and we should not return ASYNC.
Reorganize some code paths to implement this behavior.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(gst_sinks_suite):
Add unit test to verify above EOS fix.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event),
(gst_base_sink_get_position):
Don't try to preroll non-async elements after a flush.
Subtract latency form clock times when reporting position.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_query_latency), (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_get_range),
(gst_base_src_pad_get_range), (gst_base_src_loop),
(gst_base_src_unlock), (gst_base_src_unlock_stop),
(gst_base_src_set_flushing), (gst_base_src_set_playing),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Rework the locking of basesrc in a similar fashion to basesink. We
basically have one lock (LIVE_LOCK) protecting the dataflow. This allows
us to handle live sources and semi live ones much better.
Simplify flushing.
Fix unlocking when seeking, shutting down and pausing in live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync),
(gst_base_src_get_range), (gst_base_src_change_state):
Call unlock for live sources so that they can't get stuck in _create and
produce a buffer before they are set back to PLAYING.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
Also initialize the counter that calculates the first timestamp on a
buffer correctly for non-live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_event), (gst_base_sink_query),
(gst_base_sink_change_state):
Simplify latency query.
When not synchronizing, we can report latency without querying the peer
element.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_event), (gst_base_sink_change_state):
Sinks that don't preroll can always be queried for the latency.
Don't post ASYNC start when we are not async.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_set_flushing), (gst_base_sink_query),
(gst_base_sink_change_state):
Latency query is allowed after we are prerolled. Introduce a new flag
for this and stop abusing other variables.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event):
Push OOB events downstream when we get them in send_event. This allows
the application to insert events in the pipeline.
Add some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_do_sync), (gst_base_src_change_state):
Update docs.
Clean up the timestamping and syncing code for pseudo live sources.
Original commit message from CVS:
Patch by: Sebastien Moutte <sebastien at moutte dot net>
* libs/gst/controller/gstinterpolation.c:
* libs/gst/controller/gstlfocontrolsource.c:
Use gst_guint64_to_gdouble() when converting from a uint64 or
GstClockTime to double to fix the build on win32. Fixes#474371.
Original commit message from CVS:
* docs/design/part-live-source.txt:
Add docs on how live sources should timestamp.
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync):
Add some more debug info.
For subclasses that are live and like to sync, add aditional startup
latency to sync time and timestamps so that we timstamp according to the
design doc.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_set_do_timestamp),
(gst_base_src_get_do_timestamp), (gst_base_src_set_property),
(gst_base_src_get_property), (gst_base_src_do_sync):
* libs/gst/base/gstbasesrc.h:
Add property to make the basesrc timestamp buffers based on the current
running time.
API: GstBaseSrc::do-timestamp
API: gst_base_src_set_do_timestamp()
API: gst_base_src_get_do_timestamp()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_query):
Protect eos and have_preroll with the OBJECT lock so we don't need to
take the PREROLL lock when querying the latency. Fixes#473846.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_set_async_enabled),
(gst_base_sink_is_async_enabled), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add async property to instruct the sink never to inform the parent about
ASYNC state changes, update docs.
Check argument with g_return_* for the public functions.
API: GstBaseSink::async property
API: gst_base_sink_set_async_enabled()
API: gst_base_sink_is_async_enabled()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop):
Improve debugging.
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_change_state):
Rearrange some code so that we can add support for measuring the
startup latency.
Original commit message from CVS:
* gst/gstmessage.h:
Add some more docs for the messages.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query):
Add some more debugging.
* tools/gst-launch.c: (event_loop):
When interrupting, don't try to set pipeline to PAUSED twice.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Don't send an async_start message during downwards state change if target
state is less than READY
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstlfocontrolsource.c: (_calculate_pos),
(gst_lfo_waveform_get_type), (gst_lfo_control_source_reset),
(gst_lfo_control_source_new),
(gst_lfo_control_source_set_waveform),
(gst_lfo_control_source_bind), (gst_lfo_control_source_init),
(gst_lfo_control_source_finalize),
(gst_lfo_control_source_dispose),
(gst_lfo_control_source_set_property),
(gst_lfo_control_source_get_property),
(gst_lfo_control_source_class_init):
* libs/gst/controller/gstlfocontrolsource.h:
* libs/gst/controller/gstlfocontrolsourceprivate.h:
API: Add GstLFOControlSource, a control source that gives values
for specific timestamps based on several periodic waveforms.
Fixes#459717.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add documentation and unit tests for GstLFOControlSource.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
When linearly interpolating integer types, round to the nearest int
by adding 0.5. Don't do it for float/double types.
Fixes the failing controller test on my machine, which is somehow
rounding differently than on the buildbots.
Original commit message from CVS:
Reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_add_interpolation_control_source),
(gst_controlled_property_new), (gst_controlled_property_free),
(gst_controller_find_controlled_property),
(gst_controller_new_valist), (gst_controller_new_list),
(gst_controller_new), (gst_controller_remove_properties_valist),
(gst_controller_remove_properties_list),
(gst_controller_remove_properties),
(gst_controller_set_property_disabled),
(gst_controller_set_disabled), (gst_controller_set_control_source),
(gst_controller_get_control_source), (gst_controller_get),
(gst_controller_sync_values), (gst_controller_get_value_array),
(_gst_controller_dispose), (gst_controller_get_type),
(gst_controlled_property_set_interpolation_mode),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_get_all), (gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstcontrolsource.c:
(gst_control_source_class_init), (gst_control_source_init),
(gst_control_source_get_value),
(gst_control_source_get_value_array), (gst_control_source_bind):
* libs/gst/controller/gstcontrolsource.h:
* libs/gst/controller/gsthelper.c: (gst_object_set_control_source),
(gst_object_get_control_source):
* libs/gst/controller/gstinterpolation.c:
(gst_interpolation_control_source_find_control_point_node),
(gst_interpolation_control_source_get_first_value),
(_interpolate_none_get), (interpolate_none_get),
(interpolate_none_get_boolean_value_array),
(interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(_interpolate_trigger_get), (interpolate_trigger_get),
(interpolate_trigger_get_boolean_value_array),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free), (gst_interpolation_control_source_reset),
(gst_interpolation_control_source_new),
(gst_interpolation_control_source_set_interpolation_mode),
(gst_interpolation_control_source_bind),
(gst_control_point_compare), (gst_control_point_find),
(gst_interpolation_control_source_set_internal),
(gst_interpolation_control_source_set),
(gst_interpolation_control_source_set_from_list),
(gst_interpolation_control_source_unset),
(gst_interpolation_control_source_unset_all),
(gst_interpolation_control_source_get_all),
(gst_interpolation_control_source_get_count),
(gst_interpolation_control_source_init),
(gst_interpolation_control_source_finalize),
(gst_interpolation_control_source_dispose),
(gst_interpolation_control_source_class_init):
* libs/gst/controller/gstinterpolationcontrolsource.h:
* libs/gst/controller/gstinterpolationcontrolsourceprivate.h:
API: Refactor GstController into the core controller which can take
a GstControlSource for providing actual values for timestamps.
Implement a interpolation control source and use this for backward
compatibility, deprecate a bunch of functions that are now handled
by GstControlSource or GstInterpolationControlSource.
Make it possible to disable the controller completely or only for
specific properties. Fixes#450711.
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add new functions and classes to the docs.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* tests/examples/controller/audio-example.c: (main):
Port unit test and example to the new API and add some new
unit tests.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Work around the brokenness of the event vmethod in basetransform. Prefer
to return TRUE when the subclass returned FALSE (meaning don't forward
the event).
* libs/gst/base/gstbasetransform.h:
Clarify the docs.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
Fix wrong getter for enums in controller.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init):
Intercept criticals and warnings in the Gst-Phonon log domain, so
ASSERT_CRITICAL() etc. can be used in gst-phonon's unit tests as
well.
Original commit message from CVS:
* libs/gst/check/Makefile.am:
* libs/gst/check/gstcheck.h:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Ugly 'fix' for the controller unit test on the p5 bot: in
fail_unless_equals_float() check whether the values are 'almost
equal' by allowing a small absolute error, which should be good
enough for our use cases (normal numbers and values close to 0).
Proper fixage left to floating point arithmetic aficionados.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.h:
API: add fail_unless_equals_float() and assert_equals_float().
Add documentation for some of the macros.
* tests/check/libs/controller.c: (GST_START_TEST):
Use newly-added asserts.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Actually use the new functions with min/max checks for the trigger and
none interpolation modes for get() and get_value_array() instead of
just the latter.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_free):
Unset the minimum and maximum GValues when freeing the corresponding
GstControllerProperty struct.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(interpolate_trigger_get),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Protect against values larger or smaller than the minimum or maximum
allowed value for the property when using values that can be compared.
Optimize trigger interpolator a bit by taking the last requested value
into account instead of always looping through the complete list.
Fix coding style a bit, everywhere else we use "return foo" instead
of "return (foo)".
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the protection against too large or too small
values.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c: (DEFINE_CUBIC_GET):
Use gst_util_guint64_to_gdouble for conversions.
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
Clarify docs: The get_all, get_value_array(s) functions
don't modify the GObject properties.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Use an array of the correct type when using _get_value_array with
linear interpolation.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Add support for retrieving value arrays when using the trigger
interpolation mode.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c:
(gst_controller_suggest_next_sync), (gst_controller_sync_values),
(_gst_controller_get_property), (_gst_controller_set_property),
(_gst_controller_init), (_gst_controller_class_init):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gsthelper.c: (gst_object_suggest_next_sync),
(gst_object_get_control_rate), (gst_object_set_control_rate):
API: gst_controller_suggest_next_sync(), gst_object_suggest_next_sync()
Add API that provides sync suggestion timestamps for elements that
call gst_object_sync_values() from which those elements can subdivide
their processing loop to get the best results for the controlled
properties. For now it just suggests last_sync + control_rate as
new timestamp but this will be improved in the future.
While doing that change the control-rate property to a GstClockTime
from guint and change it's meaning from samples to nanoseconds as
the GstController doesn't know anything about sampling rate. Strictly
speaking this breaks ABI but as the control-rate property didn't do
anything in the past and as such couldn't be used this should be no
problem.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node):
Save last synced value from the list to continue searching from there
in future syncs. This speeds everything up a bit.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes#422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
Actually write ABI structs to the file specified in the GST_ABI
environment variable, as the message we print claims we would.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstcheck.h:
Add G_BEGIN_DECLS and G_END_DECLS. Move GST_CHECK_MAIN where it
belongs.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* libs/gst/check/gstcheck.h:
Fix compilation and running against 0.9.4. Fixes#377332.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_flush),
(gst_adapter_take_buffer):
Fix format string to use all its arguments.
Remove useless >= check on a guint
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_new_list), (_gst_controller_dispose),
(_gst_controller_finalize), (_gst_controller_class_init):
Take ref to controlled object so that it cannot disappear.
Fixes#357432.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
Remove local debugging system and use Gstreamer's instead.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
2006-10-05 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
* configure.ac:
* libs/gst/net/Makefile.am:
Fix a compilation issue with Forte on Solaris. inet_aton is in
libresolv.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_set_from_list):
Don't g_return_val_if_fail() on timed values with invalid timestamps
inside a critical section without unlocking the mutex. Spotted by
René Stadler. (#357617)
Also, fix up refcounting properly: when returning an existing
controller, we should increase the reference only once and not
once per property and when trying to control a property again
we should also increase the refcount.
Original commit message from CVS:
* configure.ac:
Don't pull in gmodule-2.0.pc as a dependency in our .pc files - we
want gmodule-no-export-2.0.pc instead so that we don't drag in
--export-dynamic on every project that links to GStreamer.
Also, make our export regex only match the start of symbols, rather
than any symbol that contains '_gst' somewhere.
* libs/gst/check/Makefile.am:
The libgstcheck we build does however need export-dynamic, as it
produces some symbols that don't match our _gst... style regex.
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* libs/gst/base/gstbasesrc.c:
(gst_base_src_default_check_get_range), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Match _start/_stop calls in the activate functions. Remove redundant
_stop call from the state change function. Fixes#356910.
Turn failure DEBUG into ERROR.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_valist),
(gst_controller_new_list):
Ref instances when returning them again (fixes#357180)
Original commit message from CVS:
* gst/gstelement.c: (gst_element_post_message),
(gst_element_dispose):
Use _DEBUG_OBJECT some more.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Avoid typechecks.
* tools/gst-launch.c: (main):
If the toplevel element is not a GstPipeline, it must be put in a
pipeline so that a bus and clock is selected.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
JITTER, RATE, and LATENCY query should be handled by the
default case and not by the CONVERT query code.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check if requested caps are the same as the sinks caps IF
->have_same_caps is TRUE. If they are not, act as if have_same_caps
is FALSE.
This fixes the renegotiation issues stated in #352827.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_do_sync),
(gst_base_sink_preroll_object):
Make sure that our internal state is correct when we commit our state
asynchronously. This solves a race where a state change to PLAYING
could cause the sink to remain blocked in preroll in some situations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_preroll),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Expose logic to wait for preroll so that subclasses such as audiosink
can also use this method.
API: gst_base_sink_wait_preroll()
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/plugins/gstreamer-plugins-sections.txt:
Fix docs some more.
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
* libs/gst/base/gstcollectpads.h:
Documentation updates.
Free queued buffer when removing a pad.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Inform GstSegment of the last stop position in order for the current
segment to have a proper duration if it doesn't have a specific stop
position from which a duration could be calculated.
This bug was noticeable when a non-flushing, non-update new segment was
followed by another segment (all buffers from the new segment were being
dropped).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_structure_is_equal_foreach),
(gst_caps_merge):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
API: Add gst_caps_merge() and use it in basetransform, fixes#345444
in a better way
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Only call downstream buffer_alloc if transform element is passthrough
or always_in_place. Closes#350449.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstbufferstraw.c:
Make gstcheck stuff show up in docs (still needs to
be documented properly though).
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
Use const gchar * variables in fail_unless_equals_string
macro to avoid compiler warnings (and don't use tabs for
indenting).
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
Fix ASSERT_CRITICAL and ASSERT_WARNING macros to actually
print something when they fail.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
If the parent state change function failed, don't assume we can safely
stop the source, this will be done when the pads are deactivated.
Original commit message from CVS:
2006-08-11 Andy Wingo <wingo@pobox.com>
* configure.ac:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packetizer_new):
* tests/check/libs/gdp.c: (gst_dp_suite): GST_DISABLE_DEPRECATED
is only for users of API that don't want to see deprecated
functions in the headers; people that want to compile out
deprecated code should pass -DGST_REMOVE_DEPRECATED into the
CFLAGS. Fixes the build of multifdsink, or will soon..
Original commit message from CVS:
* libs/gst/controller/gstcontroller.h:
fix ABI size-correction
* tests/check/libs/gdp.c: (gst_dp_suite):
make tests that use deprecated API conditional
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Even if we can't figure out the proper format to request downstream,
call buffer_alloc() downstream with the input parameters without setting
the caps on the srcpad. This will force negotiation in the chain
function.
Closes#350449
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer_any), (gst_dp_packet_from_caps_any),
(gst_dp_crc), (gst_dp_header_payload_length),
(gst_dp_header_payload_type), (gst_dp_packet_from_event),
(gst_dp_packet_from_event_1_0), (gst_dp_buffer_from_header),
(gst_dp_caps_from_packet), (gst_dp_event_from_packet_0_2),
(gst_dp_event_from_packet), (gst_dp_validate_header),
(gst_dp_validate_payload):
Make debug category static
Constify the crc table.
Do some more arg checking in public functions.
Fix some docs and do some small cleanups.
* tests/check/libs/gdp.c: (GST_START_TEST), (gst_dp_suite):
Add some more checks to see if GDP deals with bogus input.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Use OBJECT_LOCK and refcounting to get the pad caps in the
buffer_alloc function because the caps could change while we are
busy with them. Fixes#349105
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked), (gst_collect_pads_pop),
(gst_collect_pads_clear), (gst_collect_pads_flush),
(gst_collect_pads_event), (gst_collect_pads_chain):
When flushing a pad, also clear the queued buffer so that we don't
accidentally use it when we shouldn't.
Fix leaks by inreffing incomming buffer.
Flush out queued buffers in case of errors.
Fixes#347452.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
2006-07-21 Andy Wingo <wingo@pobox.com>
* libs/gst/check/Makefile.am
(libgstcheck_@GST_MAJORMINOR@include_HEADERS)
(libgstcheck_@GST_MAJORMINOR@_la_SOURCES):
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstbufferstraw.c: Add some new hype testing
functions, thus proving I am still a GStreamer haxor. OK I wrote
them a long time ago, but anyways.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_event_from_packet_1_0):
Fixes#347337: failure to deserialize event packets with
empty payload (only event type)
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_run_suite):
* libs/gst/check/gstcheck.h:
create a macro and function so that the simple unit test
case can be just one macro to create main()
Original commit message from CVS:
* gst/gstinfo.c:
Promote GST_DEBUG_CATEGORY_STATIC in example in docs.
* libs/gst/net/gstnetclientclock.c:
* libs/gst/net/gstnettimeprovider.c:
Use GST_DEBUG_CATEGORY_STATIC here too (#342503).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* docs/README:
* docs/images/gdp-header.svg:
add a gdp image
* docs/libs/Makefile.am:
* docs/libs/gdp-header.png:
* libs/gst/dataprotocol/dataprotocol.c:
add it to the API docs
* docs/manual/intro-motivation.xml:
fix typo
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out CRC code
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init),
(gst_check_chain_func):
* libs/gst/check/gstcheck.h:
Add a cond/mutex to the check support lib, signal this whenever we
add to the buffers list. This will allow tests to not busy-wait on
the buffer-list.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out some common header init code
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/tmpl/gstdataprotocol.sgml:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_crc):
* libs/gst/dataprotocol/dataprotocol.h:
API: make gst_dp_crc() public
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_query_types), (gst_base_src_update_length):
Publish supported query types.
Update last_stop field in get_range mode so the position
query works. Fixes#342321.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
2006-05-10 Thomas Vander Stichele <thomas at apestaart dot org>
* libs/gst/check/gstcheck.h:
add an assert for setting state to avoid lots of repetitive code
in the future
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Always push non-flushing serialized events in the streaming
thread.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment):
Add applied_rate to the debug
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Copy applied_rate into the outgoing NEWSEGMENT event
Original commit message from CVS:
Patch by: Philippe Rouquier <philippero at libertysurf dot fr>
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
call ::unlock before taking the PREROLL_LOCK so we can safely
handle elements that lock in ::render.
Fixes#340174.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Unify error handling, don't post an error message
when a push() returns EOS but perform our normal EOS
handling code. Fixes#340772.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Store the sync time of the buffer end position separatly in a
new variable eos_rtime so we can properly sync the EOS event.
Fixes#340697.
Fix the docs for gst_base_sink_set_qos_enabled().
Don't set segment start to invalid value when we receive a
non TIME newsegment.
get closer to handling position reporting for negative rates
correctly.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
make sure GstBaseTransformClass shows up in the docs
* libs/gst/base/gstbasetransform.c:
* libs/gst/base/gstbasetransform.h:
move docs so gtk-doc picks it up now
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
back out the newsegment handling change, see #340060 for ongoing
discussion
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
fix changelog entry about last collectpads change,
add notes about proper fix
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packet_from_event),
(gst_dp_event_from_packet):
Fixes in reading/writing events over GDP (not currently used?) -
dereferencing NULL events for unknown/invalid event types, memory
leak, and change g_warning to GST_WARNING.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_is_too_late),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position), (gst_base_sink_change_state):
When frame dropping is enabled, we should not ignore frames
without a duration.
Update some documentation.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* libs/gst/net/gstnettimepacket.c: (gst_net_time_packet_send):
MSG_DONTWAIT is not defined on Cygwin, so work
around that (fixes#317048).
Original commit message from CVS:
* gst/gstsegment.c:
Added some more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_perform_qos),
(gst_base_sink_reset_qos):
Calculate more accurate rate values.
Original commit message from CVS:
* gst/gst_private.h:
add a new #ifdef to use __declspec(dllimport) only for
other modules and not for gstreamer core
* gst/gstbasesink.c: (gst_base_sink_perform_qos):
use gst_guint64_to_gdouble for conversion
* win32/common/libgstreamer.def:
add new exported functions
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcontroller.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstdataprotocol.dsp:
* win32/vs6/libgstnet.dsp:
update project files
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Be a bit nicer to badly behaving upstream elements that expect
us to deal with non TIME segments and timestamps (such as fakesrc
in the testsuite).
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
Original commit message from CVS:
2006-04-05 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_set_blocked_async): More debug.
* libs/gst/base/gstbasetransform.c
(gst_base_transform_sink_eventfunc): When resetting our segment on
FLUSH_STOP, also update the flag saying we haven't seen a
newsegment.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* gst/gsttaglist.c:
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstbasesrc.h:
Documentation updates. Make BaseSink and BaseSrc docs contain the
class structure so that people can actually see the prototypes for
virtual functions they're supposed to be overriding.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_do_sync),
(gst_base_sink_record_qos_observation),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_change_state):
More QoS measurements as described in the design doc.
Get rid of ringbuffer with observations, running average is
more simple and equally good.
Calculates valid proportion now.
Added beginning of flood measurement.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_finalize),
(gst_base_src_send_event), (gst_base_src_loop),
(gst_base_src_change_state):
Perform the EOS logic when we reach the segment stop position.
Fix compilation on gcc4.1
Original commit message from CVS:
Inspired by a patch of: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_finalize),
(gst_base_src_send_event), (gst_base_src_change_state):
Handle element seek correctly when we are streaming.
Fixes#326998.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_finalize),
(gst_base_sink_set_qos_enabled), (gst_base_sink_is_qos_enabled),
(gst_base_sink_set_property), (gst_base_sink_get_property),
(gst_base_sink_commit_state), (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_add_qos_observation), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_preroll_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Decouple max-lateness and the fact that QoS messages are generated
with a new property (qos).
Add vmethod so subclasses can be notified of ASYNC playing
state changes.
Collect timestamp start and stop to report better current
position in EOS/PLAYING/PAUSED/READY/NULL.
Refactor QoS/frame dropping and other measurements.
API: GstBaseSrc::qos
* libs/gst/base/gstbasesink.h:
Added Private struct.
API: gst_base_sink_set_qos_enabled
API: gst_base_sink_is_qos_enabled
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_do_qos):
Better debug info when we receive a segment event.
Reorganize a bit so we can pass the get_times() results around.
Use the segment format when calculating the running time.
Don't do QoS is sync is disabled or we have no clock or the
element does not want us to sync to the clock.
Don't drop buffers if QoS is disabled for now.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Can't use gst_segment_to_running_time() when the segment
is not in GST_TIME_FORMAT (like with filesink, for example).
Stops flac encoding pipelines from spewing critical warnings
at EOS (#331248).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_do_qos):
Separate QoS calculation.
Only drop buffers when lateness is bigger than the
duration of the buffer.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_do_sync):
Small cleanups.
Use QOS debug category.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
Fix docs for dataprocotol to not get the return types completely
wrong for a few functions.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_get_length),
(gst_type_find_helper_get_range):
If we are provided with the size, we should implement
GstTypeFind::get_length, so that typefind functions who
want to can actually peek at the middle of a file.
Original commit message from CVS:
* docs/design/part-element-transform.txt:
Added some docs about the design of tranform elements.
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Mark buffers with the DISCONT flag.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Added basesink new methods.
* gst/gstevent.c:
* gst/gstevent.h:
Docs updates. Flesh out the QoS docs.
* libs/gst/base/gstadapter.c:
Small doc clarification about ownership and flushing.
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Added new methods to allow subclass to control max-lateness
and sync.
Generate very basic QoS events based on last sync observation.
Updated docs, fix typo, added some QoS blurb.
* libs/gst/base/gstbasesrc.c:
Remove obsolete _get_state() calls from docs.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
Fix#333669, Add pad accessor defines for GstBaseTransform
Fix docs for GstBaseSrc.
Original commit message from CVS:
* libs/gst/base/gstpushsrc.c: (gst_push_src_class_init),
(gst_push_src_check_get_range):
Push sources don't support pull mode by default.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_pad_check_get_range),
(gst_base_src_default_check_get_range):
* libs/gst/base/gstbasesrc.h:
Add ::check_get_range() vfunc to GstBaseSrc (#332611),
provide default implementation, and rename
gst_base_src_check_get_range() to
gst_base_src_pad_check_get_range() for clarity.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Make max-lateness a property.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object):
Don't ever draw a frame that is >10ms late.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Make sure caps are writable before passing them to
gst_caps_append().
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (type_find_factory_rank_cmp),
(gst_type_find_helper):
Try typefinding factories with the highest rank first.
Original commit message from CVS:
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gsttypefindhelper.c:
Add section for typefind helper and add documentation
for the old and the new function.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_loop),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
* libs/gst/base/gstbasesrc.h:
Don't unconditionally send EOS when going from PAUSED to
READY state, esp. make sure we don't send two EOS events
in some cases (e.g. one when reaching EOS and one when
going from PAUSED to READY). Also, we don't want to send
EOS events when operating in pull mode. However, we do
want to send an EOS event when shutting down a live
source explicitly, for example (fixes#330996).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Fix a stupid bug. I was
sure i compiled that.
------------------------------------------------------
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_change_state): Make basetransform reusable.
(Closes#331898)
------------------------------------------------------
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstcollectpads.c (gst_collect_pads_chain): Only
update last_stop if we're in TIME format and the timestamp is
valid.
* libs/gst/base/gstcollectpads.c (gst_collect_pads_event)
* libs/gst/base/gstbasetransform.c (gst_base_transform_eventfunc):
* libs/gst/base/gstbasesink.c (gst_base_sink_configure_segment):
If we get a new newsegment with a different format, adapt
accordingly.
* gst/gstclock.c (gst_clock_set_calibration): Accept a numerator
of 0. Not a problem, really.
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_chain_unlocked): Only
warn if sync=true.
Original commit message from CVS:
2006-02-05 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_event): Collectpads now holds a reference
to the GstPad that was added. Indeed we don't want to look
at pads that might just go away with no warning...
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_render_object),
(gst_base_sink_queue_object_unlocked):
Only keep track of prerollable items when we are
prerolling.
Before rendering after preroll, always check if we
have queued items.
Added some more debugging.
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* docs/manual/advanced-dparams.xml:
* docs/pwg/advanced-dparams.xml:
more dparam docs
* gst/gstindex.c:
fix docs
* libs/gst/controller/lib.c: (gst_controller_init):
init just once
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_empty), (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event),
(gst_base_sink_is_prerolled), (gst_base_sink_wait),
(gst_base_sink_do_sync), (gst_base_sink_handle_event),
(gst_base_sink_handle_buffer), (gst_base_sink_set_flushing),
(gst_base_sink_deactivate), (gst_base_sink_activate),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Basesink cleanups, remove some old code.
Handle the case where a subclass can preroll in the render
method (mostly audiosinks).
Handle more events.
Remove some locks around variables that are now protected
with the PREROLL_LOCK (clock_id, flushing, ..).
Optimize position query some more, do correct locking.
Remove old code to push queue in state change, this is not
needed anymore since preroll blocks on all prerollable items
now.
Almost implemented as described in design doc.
Original commit message from CVS:
2006-01-25 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
We only query position using the clock in the playing state.
Query peer in the other cases.
* win32/common/config.h: Updates.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_unlocked):
A clock entry that is scheduled for the exact time of the
clock is still in time.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Add some more debug info.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_is_collected):
Don't loop infinitely if there are no buffers to present. Partially
fixes#327197, but collectpads is just broken for reusing elements
to do multiple encodes atm.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
* gst/gstclock.c: (gst_clock_id_wait):
Added some more debug info.
* libs/gst/base/gstadapter.c:
Added more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_chain):
Added some comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Some cleanups.
When the sink finishes blocking on the preroll buffer, it can
immediatly render it instead of rendering when the next buffer
arrives.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync),
(gst_base_sink_chain):
Small cleanups.
GST_ELEMENT_CLOCK and sync are protected with LOCK.
Don't store _last_stop if the buffer is dropped.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_pop):
Need to awaken ALL the pads when we pop a buffer, otherwise
collectpads only works when there is 2 input streams.
Original commit message from CVS:
2005-12-14 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_remove_pad), (gst_collect_pads_is_collected),
(gst_collect_pads_event), (gst_collect_pads_chain): Refactoring
of collectpads. This version removes a lot of races without
touching API/ABI. Yay !
Original commit message from CVS:
2005-12-12 Andy Wingo <wingo@pobox.com>
* libs/gst/net/gstnettimeprovider.c
(gst_net_time_provider_class_init, gst_net_time_provider_init)
(gst_net_time_provider_set_property)
(gst_net_time_provider_get_property): Export "active" as a GObject
property.
(gst_net_time_provider_thread): Only respond to time queries if
the time provider is active.
* libs/gst/net/gstnettimeprovider.h: Add an "active" boolean to
NetTimeProvider, preserving binary compat.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Added new symbol to docs.
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_set_format),
(gst_base_src_default_query), (gst_base_src_query),
(gst_base_src_default_do_seek), (gst_base_src_do_seek),
(gst_base_src_perform_seek), (gst_base_src_send_event),
(gst_base_src_default_event), (gst_base_src_event_handler),
(gst_base_src_set_property), (gst_base_src_get_property),
(gst_base_src_wait), (gst_base_src_do_sync),
(gst_base_src_update_length), (gst_base_src_get_range),
(gst_base_src_check_get_range), (gst_base_src_loop),
(gst_base_src_default_negotiate), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
* libs/gst/base/gstbasesrc.h:
Implement seeking to other formats than _BYTES.
Implement more seeking methods correctly.
Doc updates.
Added query vmethod.
Added do_seek vmethod to make life easier for subclasses
when seeking.
API addition: gst_base_src_set_format()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Take current playback rate into account when reporting
the position.
Original commit message from CVS:
* gst/gstbuffer.c:
Small docs update.
* gst/gstcaps.c: (gst_caps_is_equal):
Don't assert on NULL <--> X. Fixes#323260
* gst/gstminiobject.c: (gst_mini_object_replace):
If we're doing atomic operations, we might just as well use
the proper way to get an atomic pointer.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Clean up debugging.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init):
Change debug category to 'collectpads' from 'collect_pads'
(fixes#323250).
Original commit message from CVS:
patch by: Sebastien Moutte
* libs/gst/controller/gstinterpolation.c:
use convert function for uint64/double
* win32/vs6/libgstcontroller.dsp:
link to GLib
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
whitespace prices have crashed, we should feel free to use some now
use gst_guint64_to_gdouble
Original commit message from CVS:
2005-11-29 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesink.h: en-LARGE the padding.
* gst/gstconfig.h.in (GST_PADDING_LARGE): New define, the number
of pointers by which to pad very extensible base classes (like the
ones in libs/gst/base).
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_buffer_alloc):
Treat a pad alloc with new caps the same as if we were not
negotiated, in order to allow a changing upstream output
to produce a new format of data.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
* docs/random/ensonic/dparams.txt:
some TODOs for the next dev cycle
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_new):
* libs/gst/controller/gstcontroller.h:
use base type to assign acccessor functions
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/base/Makefile.am:
* gst/check/Makefile.am:
* gst/elements/Makefile.am:
* gst/net/Makefile.am:
update LDFLAGS use some more
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_query):
Fix wrong percentage query.
* gst/gstutils.c: (gst_util_uint64_scale),
(gst_util_uint64_scale_int):
Add some more common cases that can be handled
efficiently to _scale.
Original commit message from CVS:
* check/gst/gstminiobject.c: (thread_ref), (GST_START_TEST),
(gst_mini_object_suite):
don't use check calls from threads; check probably isn't
threadsafe and using a lock to make it threadsafe would
defeat the purpose of this check
* gst/check/gstcheck.c:
* gst/check/gstcheck.h:
use GST_DEBUG some more
Original commit message from CVS:
2005-11-24 Michael Smith <msmith@fluendo.com>
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Unlock the PREROLL_LOCK in a failure case.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Update for new API and API changes.
* gst/gstobject.h:
Documentation fix: GST_TRYLOCK -> GST_OBJECT_TRYLOCK
* gst/gstvalue.c:
Documentation typo fix.
* gst/net/gstnettimepacket.c:
Documentation fixes for arguments.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Update TODO.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
* gst/net/gstnetclientclock.h:
Use parent fields for timeout and window_size.
Original commit message from CVS:
2005-11-23 Andy Wingo <wingo@pobox.com>
* check/net/gstnetclientclock.c (test_functioning): Adjust to
rate_num/rate_denom change.
* gst/net/gstnetclientclock.c
(gst_net_client_clock_observe_times): Take the SLAVE_LOCK not the
OBJECT_LOCK. Don't call add_observation with the lock.
* gst/gstclock.c (gst_clock_init): Initialize the rate as a
fraction.
(gst_clock_adjust_unlocked): Adjust using uint64_scale and the
rate fraction.
(gst_clock_set_calibration, gst_clock_get_calibration): Change to
deal with rate as a fraction whose numerator and denominator are
GstClockTime values.
(gst_clock_set_master): Only use the OBJECT_LOCK to set the
master; the other fields are protected by the SLAVE_LOCK.
(do_linear_regression): Note that this must be called with the
SLAVE_LOCK.
(gst_clock_add_observation): Take the SLAVE_LOCK, not the
OBJECT_LOCK. Call set_calibration instead of touching the
variables directly.
(gst_clock_set_property, gst_clock_get_property): Protect
master/slave parameters with the SLAVE_LOCK.
* gst/gstclock.h (GstClock): Remove rate, add rate_numerator and
rate_denominator. PR3C1S3. Add a new lock, the SLAVE_LOCK, and
note that all of the instance variables that add_observation and
the set_master functions use are protected by that lock and not
the OBJECT_LOCK.
(GST_CLOCK_SLAVE_LOCK, GST_CLOCK_SLAVE_UNLOCK): New macros.
* gst/gstclock.c (gst_clock_add_observation): No longer requires
the caller to take the object lock.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
make two symbols from gstinfo private for the docs
* gst/base/gstcollectpads.h:
* gst/gstutils.c:
fix doc typos, update docs
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Make sure the GstFlowReturn is returned.
* gst/gstbus.c: (gst_bus_add_signal_watch_full),
(gst_bus_add_signal_watch):
* gst/gstbus.h:
add gst_bus_add_signal_watch_full.
* gst/gstplugin.c: (gst_plugin_load_file):
Small style cleanup.
Original commit message from CVS:
* gst/gst.h:
include "gstchildproxy.h"
* gst/gstchildproxy.h:
* libs/gst/controller/gstcontroller.h:
use G_GNUC_NULL_TERMINATED
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (GST_LIVE_BROADCAST, GST_LIVE_SIGNAL)
(GST_LIVE_TIMED_WAIT, GST_LIVE_WAIT, GST_LIVE_GET_COND)
(GST_LIVE_UNLOCK, GST_LIVE_TRYLOCK, GST_LIVE_LOCK)
(GST_LIVE_GET_LOCK): Moved here from gstbasesrc.h. They are
private to the basesrc implementation.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c: Turn off debugging.
* check/net/gstnetclientclock.c (test_functioning): Assert that the
times connverge somewhat. Can't make a real test.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (do_linear_regression): Use all
integer arithmetic. Return the minimum of the domain, which can be
set as "internal" for gst_clock_set_calibration.
(gst_net_client_clock_observe_times): Call _set_calibration.
(gst_net_client_clock_new): Call _set_calibration instead of
rate_offset.
* check/net/gstnetclientclock.c (test_functioning): Use the right
adjustment api.
* gst/gstclock.h:
* gst/gstclock.c (gst_clock_get_calibration)
(gst_clock_set_calibration): New functions, obsolete the ones I
added yesterday. Doh. Precision issues mean we have to extrapolate
from a point in the more recent past than 1970.
(gst_clock_get_rate_offset, gst_clock_set_rate_offset): Mark as
obsolete.
(gst_clock_adjust_unlocked): Use the right calibration data.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_thread):
Whoops, check the right fd. Also add some debugging.
(gst_net_client_clock_observe_times): Adjust for int64 offset.
(do_linear_regression): Add a crapload of debugging. Subtract off
the minimum values from the input series to discard unneeded bits.
Use only int arithmetic. There is still double arithmetic when
calculating the intercept that needs fixing. Return boolean to
indicate success; FALSE would mean the domain or range is too
great. Still needs fixes.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position):
For the current position in stream time, we need to subtract
accumulated time.
* gst/gstsystemclock.c: (gst_system_clock_async_thread):
Release lock before calling the callback function of async
entries.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_class_init):
Port goes all the way to MAXUINT16.
* gst/net/gstnettimeprovider.c: Make the port range the same as
for the kernel: 0 assigns, otherwise ports are less than
MAXUINT16.
* check/net/gstnettimeprovider.c: Adapt for 0 == kernel assigns
port change.
* check/net/gstnetclientclock.c (test_functioning): Add the start
of another test.
Original commit message from CVS:
2005-11-18 Andy Wingo <wingo@pobox.com>
* gst/net/gstnetclientclock.c (gst_net_client_clock_new): Adjust
the clock initially so it produces values around the base time.
(gst_net_client_clock_class_init): Typo fix.
(gst_net_client_clock_thread): Add note on when the socket gets
closed.
Original commit message from CVS:
* gst/net/gstnetclientclock.c: (do_linear_regression),
(gst_net_client_clock_do_select), (gst_net_client_clock_thread):
Fix compilation, uninitialized vars and a forgotten continue.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* check/Makefile.am (check_PROGRAMS):
* check/net/gstnetclientclock.c: Add a most minimal test for the
net client clock. More to come later.
* gst/net/gstnet.h:
* gst/net/Makefile.am: Add netclientclock.
* gst/net/gstnetclientclock.h:
* gst/net/gstnetclientclock.c: New files, implement an untested
GstClock that takes its time from a network time provider.
Implements the algorithm in network-clock.scm.
* tests/network-clock.scm (*window-size*): Rename from
*queue-length*.
* tests/network-clock.scm (network-time):
* tests/network-clock-utils.scm (q-push): Update callers.
Original commit message from CVS:
2005-11-17 Andy Wingo <wingo@pobox.com>
* gst/gstclock.h (GstClock): Add rate and offset properties,
preserving ABI stability. Add rate/offset accessors. Will file bug
for the freeze break.
* gst/gstclock.c (gst_clock_adjust_unlocked): Implement using rate
and offset, trying to keep precision and avoiding
underflow/overflow.
(gst_clock_set_rate_offset, gst_clock_get_rate_offset): New
functions. Make gst_clock_set_time_adjust obsolete.
(gst_clock_set_time_adjust): Note that this function is obsolete.
Will file bug soon.
* gst/base/gstbasetransform.h: Make the ABI-stability hack
greppable by using GST_PADDING-1+1.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h:
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: Use the timepacket stuff in the
provider, include it from gstnet.h, and add it to the build.
* gst/net/gstnettimepacket.h:
* gst/net/gstnettimepacket.c: New files, abstracts out the packet
sending and receiving.
Original commit message from CVS:
2005-11-16 Andy Wingo <wingo@pobox.com>
* gst/net/Makefile.am:
* gst/net/gstnet.h: New part of core to hold network elements and
objects. Put in core because it exposes API that applications want
to use. The library is named libgstnet-tempname right now because
of the existing libgstnet in gst-plugins-base. Solution is
probably to rename the one in plugins-base; will file a bug for
the freeze break.
* gst/net/gstnettimeprovider.c:
* gst/net/gstnettimeprovider.h: New object to export a GstClock's
get_time call over the network.
* configure.ac:
* gst/Makefile.am (lib_LTLIBRARIES): Add gstnet to the build.
* check/Makefile.am:
* check/net/gstnettimeprovider.c: A most minimal test suite. Will
get additions shortly.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event):
Check if the caps are NULL, this can happen if the element
is shutting down and the pad caps are set to NULL.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
2005-11-14 Julien MOUTTE <julien@moutte.net>
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
Ref the source pad caps while we need them.
Fixes (#321386)
