Tim-Philipp Müller
e4aaee7fdd
Back to hacking -> 0.10.16.1
2009-08-30 23:26:48 +01:00
Tim-Philipp Müller
0efa34f0d5
Release 0.10.16
2009-08-29 12:12:19 +01:00
Tim-Philipp Müller
8c529a719f
0.10.15.5 pre-release
2009-08-26 00:58:45 +01:00
Wim Taymans
abee4f1d64
pulsesink: don't use relative seeks
...
Don't use relative seeks, it's too hard to track where we are after a flush
etc.
fixes #593015
2009-08-25 17:33:04 +02:00
Tim-Philipp Müller
902fdb4b15
0.10.15.4 pre-release
2009-08-24 17:50:29 +01:00
Wim Taymans
08808f7f32
pulsesrc: don't discard the result of _set_caps()
...
Use the result of gst_pad_set_caps() instead of assuming success.
See #590678
2009-08-24 16:22:47 +02:00
Wim Taymans
e9e94a771b
qtdemux: add support for agsm
...
Fixes #592530
2009-08-21 11:44:43 +02:00
Mark Nauwelaerts
15d17763c0
qtdemux: fix qt style string tag extraction
...
QT style tags are tested on starting with (C) symbol using >>,
and (unsigned) int (may) have different >> behaviour.
Fixes #592232 .
2009-08-18 19:01:11 +02:00
Tim-Philipp Müller
68c4019057
smokeenc: don't crash when compiled against libjpeg7
...
Set parameters so that we don't crash with libjpeg7. Based on
Stefan Kost's fix for jpegenc. Fixes #591951 .
2009-08-17 17:08:45 +01:00
Tim-Philipp Müller
4ce46c932b
0.10.15.3 pre-release
2009-08-14 20:18:04 +01:00
Tim-Philipp Müller
80e43452a1
checks: add test for leak to rtpbin unit test
...
See #591476 .
2009-08-14 13:47:18 +01:00
Olivier Crête
7f569ca9c8
rtpbin: Fix reference leak
...
Fixes #591476 .
2009-08-14 13:47:18 +01:00
Zaheer Merali
8dd9583357
dvdec: set bottom field first on PAL interlaced content, not top field first
...
DV interlaced content is always bottom field first. Fixes #591712 .
2009-08-14 13:34:53 +01:00
Hans de Goede
10d41286d5
v4l2src: fix 'hang' with some cameras caused by bad timestamping if no framerate is available
...
For cameras/drivers that don't support e.g. VIDIOC_G_PARM we'd end up without
a framerate and would try to divide by 0, causing run-time warnings and all
frames to be timestamped with 0, which makes sinks that sync against the clock
drop them, causing 'hangs' (observed with the pwc driver and a Logitech QuickCam
Pro 4000). So if we do not know the framerate, simply don't adjust the
timestamps. Fixes #591451 .
2009-08-14 13:30:31 +01:00
Filippo Argiolas
a3a61f8940
v4l2src: clear format list in READY->NULL
...
Clear format list and probed caps when going to NULL so if a new device
is set we'll probe the formats again instead of using previously
detected ones. Fixes bug #591747 .
2009-08-14 10:15:43 +02:00
Tim-Philipp Müller
352e071660
0.10.15.2 pre-release
2009-08-11 17:30:41 +01:00
Tim-Philipp Müller
1edaca62f0
Add myself to MAINTAINERS file and update Wim's e-mail.
2009-08-11 15:25:39 +01:00
Tim-Philipp Müller
9590df3c2e
v4l2: fix make distcheck by disting some more headers
2009-08-11 03:08:01 +01:00
Tim-Philipp Müller
dbad1d424a
docs: update
2009-08-11 02:43:35 +01:00
Tim-Philipp Müller
4701696a92
Move rtpmanager from -bad to -good.
...
Hook up build infrastructure (autotools, docs, unit test).
2009-08-11 02:43:09 +01:00
ric
92abe07e80
rtpsource: avoid buffer leak on bad seqnum
...
Fixes #590797
2009-08-11 02:30:47 +01:00
Wim Taymans
9f68303a2e
rtpsource: allow for NULL caps on buffers
...
Add the NULL caps check where it matters and also cover another case of
potential NULL caps.
Fixes #590030
2009-08-11 02:30:47 +01:00
Olivier Crête
e37844fdc7
rtpsource: Incoming buffers do not always have caps
2009-08-11 02:30:47 +01:00
Wim Taymans
3091137217
rtpsession: avoid doing lip-sync in BYE
...
When we get a BYE packet, don't do lip-sync with the SR inside because some
senders have trouble constructing valid SR packets after BYE.
2009-08-11 02:30:47 +01:00
Wim Taymans
3747ede14a
rtpbin: don't do lip-sync after a BYE
...
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
2009-08-11 02:30:47 +01:00
Wim Taymans
d2ef095b80
rtpbin: only reconsider once for BYE
...
When iterating the sources of a BYE packet, don't signal a reconsideration for
each of them but signal after we handled all sources.
2009-08-11 02:30:47 +01:00
Olivier Crête
e8c6bcdf8d
rtpsession: Free conflicting addresses on finalize
2009-08-11 02:30:46 +01:00
Wim Taymans
428368b44a
rtpbin: use new method for netaddress to string
2009-08-11 02:30:46 +01:00
Wim Taymans
512ba93159
rtpbin: do better cleanup of the src ghostpads
...
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes #561752
2009-08-11 02:30:46 +01:00
Wim Taymans
d7a8663e05
rtpsession: add a comment
2009-08-11 02:30:46 +01:00
Wim Taymans
c53e595d23
rtpbin: add SDES property
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
9f330992f5
rtpbin: add SDES property that takes GstStructure
...
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
d8496fb105
rtpbin: removed old gstrtpclient
2009-08-11 02:30:45 +01:00
Branko Subasic
779f67adc4
rtpbin: add support for buffer-list
...
Add support for sending buffer-lists.
Add unit test for testing that the buffer-list passed through rtpbin.
fixes #585839
2009-08-11 02:30:45 +01:00
Tim-Philipp Müller
c5793a6a45
Make build without warnings with debugging disabled
2009-08-11 02:30:45 +01:00
Olivier Crête
cf873498d2
rtpbin: Transform the right session sdes message
...
Fixes #584165
2009-08-11 02:30:45 +01:00
Olivier Crête
dee142a945
Add ssrc to application/x-rtp-source-sdes structure
2009-08-11 02:30:45 +01:00
Wim Taymans
bf15048f42
rtpsouce: the network address is in network order
...
Bring the network address in netowkr byte order to the host order.
2009-08-11 02:30:45 +01:00
Wim Taymans
91eef69131
rtpsource: byteswap the port from GstNetAddress
...
Since the port in GstNetAddress is in network order we might need to byteswap it
before adding it to the source statistics.
2009-08-11 02:30:45 +01:00
Wim Taymans
51251d0fa8
rtpbin: remove ptdemux ghostpads
2009-08-11 02:30:44 +01:00
Wim Taymans
57653143c3
tests: add receive rtpbin unit test
2009-08-11 02:30:44 +01:00
Wim Taymans
7d9c2d20df
rtpbin: add to new signal to remove SSRC pads
2009-08-11 02:30:44 +01:00
Ali Sabil
6c684e59c6
ssrcdemux: emit signal when pads are removed
...
Add action signal to clear an SSRC in the ssrc demuxer.
Add signal to notify of removed ssrc.
See #554839
2009-08-11 02:30:44 +01:00
Wim Taymans
48872d8215
rtpbin: use our ghostpads instead of its target
...
Since we keep a reference to our ghostpads, we can use them to track sessions.
This avoid us having to mess with the target of the ghostpad.
2009-08-11 02:30:44 +01:00
Wim Taymans
02b34602c4
tests: more rtpbin checks
2009-08-11 02:30:44 +01:00
Wim Taymans
901b7f3b69
rtpbin: don't warn when getting request pads twice
...
Allow getting the request pads multiple times, just return the previously
created pads.
2009-08-11 02:30:44 +01:00
Wim Taymans
0ae6e3603b
rtpsource: add RTP and RTCP source address
...
Add the RTP and RTCP sender addresses in the stats structure.
2009-08-11 02:30:44 +01:00
Wim Taymans
62727e8fab
rtpsession: reuse source code for SDES
...
Reuse the RTPSource object property instead of duplicating code.
2009-08-11 02:30:44 +01:00
Wim Taymans
232624c908
tests: add more rtpbin tests
2009-08-11 02:30:44 +01:00
Wim Taymans
1710d8a3a5
tests: add rtpbin unit test
...
Add the beginnings of an rtpbin unit test
Add some more stuff to .gitignore
2009-08-11 02:30:43 +01:00
