When updating playlists, there is a possibility that the playlists don't
perfectly align, but the last entry of the previous playlist is *just* before
the first entry of the new playlist.
In those cases, we still can transfer the timing information from one playlist
to another, but we do not want to return that segment as being the matching one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
When matching playlists, there is a possibility that rendition streams will not
have been updated in time (for example because that stream started later, or
playback was paused). This would cause several playback failures and seeking
failures.
In order to still fall back on our feet, attempt to synchronize that rendition
playlist against the current variant playlist. This will attempt to match the
stream time using SN/DNS/PDT/...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
If we have been updating too slowly and have gone out of the current live
window, inform the baseclass accordingly.
This is different from the case where we have been updating quicker than what
the server provides.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
* Since only flushing seeks are allowed, the "current" position is always the
global output position (and not "some" stream current position).
* In terms of figuring out to which stream to "snap" to, we can send it to any
selected stream. Removes the requirement of this function to a specific output
pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
Remove the "pending advance" hack and instead rely on the base stream current
position to track our position (instead of a potentially NULL "current
segment").
Also ensure the media playlists are always refreshed with valid stream time,
even if there is no current segment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
The stream start and current position would be properly set when seeking or
activating a stream after playback started. But it would never be properly
initialized.
Set it to NONE initially to indicate to subclasses that no position has been
tracked yet. This will allow them to detect initial stream usage.
Futhermore, once the initial streams setup is done, make sure that it is set to
a valid initial value:
* The minimum stream time in live
* Or else the period start
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2679>
If the driver does not support VIDIOC_CREATE_BUFS ioctl, the pool
configuration may get changed, which requires a validation. This would
fail to activate a pool in a case it shouldn't normally fail unless we
are out of memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2456>
Some mpeg-ts streams have extra data at the beginning. While it's not ideal, we
should be able to cope with it.
Therefore increase the initial search window for at least 4 consecutive
synchronization points to 1kB.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2626>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 200MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: tbd
https://gstreamer.freedesktop.org/security/sa-2022-0003.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
Various variables were of smaller types than needed and there were no
checks for any overflows when doing additions on the sizes. This is all
checked now.
In addition the size of the decompressed data is limited to 120MB now as
any larger sizes are likely pathological and we can avoid out of memory
situations in many cases like this.
Also fix a bug where the available output size on the next iteration in
the zlib/bz2 decompression code was provided too large and could
potentially lead to out of bound writes.
Thanks to Adam Doupe for analyzing and reporting the issue.
CVE: CVE-2022-1922, CVE-2022-1923, CVE-2022-1924, CVE-2022-1925
https://gstreamer.freedesktop.org/security/sa-2022-0002.html
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1225
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2610>
Uses prelude header files with #defines to rename DASH and MSS
symbols duplicated in their old standalone versions.
Also redefines soup-related functions when building it for
adaptivedemux2 to prevent symbol conflicts there.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2534>
macOS features hidden devices. These are devices that will
not be shown in the macOS UIs and that cannot be retrieved
without having the specific UID of the hidden device. There
are cases when you might want to have a hidden device, for example
when having a virtual speaker that forwards the data to a virtual
hidden input device from which you can then grab the audio.
The blackhole project supports these hidden devices and
this patch provides a way that if the device id is a hidden
device it will use it instead of check the hardware list of devices
to understand if the device is valid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
gtk_gl_area_get_error() doesn't return a copy of the error, but just the
error. If initialising OpenGL fails, then GtkGstGLWidget will consume
the error, and cause GTK to try and display freed memory.
==50914== Invalid read of size 8
==50914== at 0x4C4CB8A: gtk_gl_area_draw_error_screen (gtkglarea.c:663)
==50914== by 0x4C4CB8A: gtk_gl_area_draw (gtkglarea.c:687)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4D4B6BF: gtk_stack_render (gtkstack.c:2207)
==50914== by 0x4BB4B03: gtk_css_custom_gadget_draw (gtkcsscustomgadget.c:159)
==50914== by 0x4BBA4C4: gtk_css_gadget_draw (gtkcssgadget.c:885)
==50914== by 0x4D4D780: gtk_stack_draw (gtkstack.c:2119)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== by 0x4BAF0C3: gtk_container_draw (gtkcontainer.c:3674)
==50914== by 0x4E061CA: gtk_widget_draw_internal (gtkwidget.c:7084)
==50914== by 0x4BAEFB1: gtk_container_propagate_draw (gtkcontainer.c:3854)
==50914== Address 0x187a0818 is 8 bytes inside a block of size 16 free'd
==50914== at 0x48480E4: free (vg_replace_malloc.c:872)
==50914== by 0x49A5B8C: g_free (gmem.c:218)
==50914== by 0x49C1013: g_slice_free1 (gslice.c:1183)
==50914== by 0x4990DE4: g_error_free (gerror.c:870)
==50914== by 0x4990FE9: g_clear_error (gerror.c:1052)
==50914== by 0x1A489780: _get_gl_context (gtkgstglwidget.c:540)
==50914== by 0x1A4863CB: gst_gtk_invoke_func (gstgtkutils.c:39)
==50914== by 0x49A3834: g_main_context_invoke_full (gmain.c:6137)
==50914== by 0x1A486450: gst_gtk_invoke_on_main (gstgtkutils.c:59)
==50914== by 0x1A48A29E: gtk_gst_gl_widget_init_winsys (gtkgstglwidget.c:632)
==50914== by 0x1A4887E7: gst_gtk_gl_sink_start (gstgtkglsink.c:267)
==50914== by 0x6579810: gst_base_sink_change_state (gstbasesink.c:5662)
==50914== Block was alloc'd at
==50914== at 0x484586F: malloc (vg_replace_malloc.c:381)
==50914== by 0x49A9278: g_malloc (gmem.c:125)
==50914== by 0x49C1BA5: g_slice_alloc (gslice.c:1072)
==50914== by 0x49C3BCC: g_slice_alloc0 (gslice.c:1098)
==50914== by 0x499096B: g_error_allocate (gerror.c:708)
==50914== by 0x4990AF1: UnknownInlinedFun (gerror.c:722)
==50914== by 0x4990AF1: g_error_copy (gerror.c:892)
==50914== by 0x4C4B9F9: gtk_gl_area_set_error (gtkglarea.c:1036)
==50914== by 0x4C4BAF7: gtk_gl_area_real_create_context (gtkglarea.c:346)
==50914== by 0x4B21B28: _gtk_marshal_OBJECT__VOIDv (gtkmarshalers.c:2730)
==50914== by 0x4920B78: UnknownInlinedFun (gclosure.c:893)
==50914== by 0x4920B78: g_signal_emit_valist (gsignal.c:3406)
==50914== by 0x4920CB2: g_signal_emit (gsignal.c:3553)
==50914== by 0x4C4B927: gtk_gl_area_realize (gtkglarea.c:308)
Reproduced by running:
MESA_GL_VERSION_OVERRIDE=2.7 totem
See https://gitlab.gnome.org/GNOME/totem/-/issues/522
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2565>
If our downstream caps didn't intersect, we attempted to convert between
raw and ADTS stream formats, if possible. If the caps still did not
intersect, we then used the modified `src_caps` but left the
`output_header_type` unmodified.
This caused a mismatch between caps and actual stream format.
Avoid this by first copying the `src_caps` to `convcaps` for the
additional intersection tests, replacing `src_caps` if we succeed.
While we're here, clean up the code a bit and remove the `codec_data`
field from outgoing ADTS caps.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2550>
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug categories properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2348>
https://bugzilla.gnome.org/show_bug.cgi?id=741398 changed
rtpptdemux in 2014 to not post a GST_ELEMENT_ERROR on the
bus when dropping an invalid (non-RTP) packet, but still
returned GST_FLOW_ERROR upstream - so the pipeline still
stops, but now without a useful bus error.
Return GST_FLOW_OK instead, so the pipeline keeps
running. Some old telephony equipment can send invalid
packets before the real RTP traffic starts.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2520>
get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug category properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2349>
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.
But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.
Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.
So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
- Consistently unref the chained buffer at the end of the chain
function, if we're not handing it off to `gst_pad_push`. This avoids a
few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
crashing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.
Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
If for some reason the encoder produces frames with a pts higher than
the input one, we were dropping all the video encoder frames and ended
up crashing when trying to access the pts of a NULL pointer returned by
gst_video_encoder_get_oldest_frame().
I hit this scenario by feeding a decreasing timestamp to vp8enc which
seem to confuse the encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
Hantro H1 and Rockchip VEPU2 drivers will pad the width/height to a
multiple of 16. In order to obtain the right JPEG size, the image needs
to be cropped using the S_SELECTION API. This support is added as best
effort since older drivers may emulate this by looking at the capture
queue width/height.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2329>
mp4mux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
flvmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.
Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
Previously, we only added it when actually performing synchronization
based on the NTP time.
The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.
Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6. When binding to an IPv6 address, this
results in the following error:
gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)
This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"
This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.
Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.
These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).
Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.
Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Two RTP Header extensions are very relevant for rtprtxsend/receive.
1. "urn:ietf:params:rtp-hdrext:sdes:rtp-stream-id": will always be removed
2. "urn:ietf:params:rtp-hdrext:sdes:repaired-rtp-stream-id": will be written
instead of the "rtp-stream-id" header extension.
Currently it's only a simple replacement of one header extension for
another however a future change would only add the relevant extension
based on some heuristics (like, video frames only on one of the rtp key
frame buffers, or only until the rtx ssrc has been validated by the peer)
in order to reduce the required bandwidth.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
Previously the result of the calculations included inaccuracies caused
by the NTP clock estimation, which caused the timestamps to jitter
+/- 1/clockrate.
By reorganizing the calculations it is possible to get rid of this
inaccuracy and calculate deterministic and exact packet timestamps based
on the actual NTP clock as long as the estimation is not off by more
than 2**31 clockrate units.
The only remaining inaccuracy that is introduced now is caused by the
conversion from the NTP clock to the pipeline clock.
Also split up debug output, demote many messages to the trace debug
level and output more intermediate results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1955>
This is difficult to encounter in ordinary networks, but is
encountered when using tc-netem to add random delays to packets, and
also when your UDP stream is bonded over multiple links with varying
characteristics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
