This reverts commit 73ebdb888e.
This isn't needed and it breaks srtpenc ! srtpdec, specifying the
roll-over counter manually is an advanced feature.
Also revert "srtp: Add "roc" caps field to the gst-launch example"
This reverts commit 67ae35813b.
https://bugzilla.gnome.org/show_bug.cgi?id=765079
ext/sctp/ext@sctp@@gstsctp@sha/sctpassociation.c.obj: In function `receive_cb':
/var/lib/jenkins/workspace/cerbero-cross-mingw32/workdir/sources/windows_x86/gst-plugins-bad-1.0-1.15.0.1/_builddir/../ext/sctp/sctpassociation.c:692: undefined reference to `_imp__ntohl@4'
Expanded to support image format to YV12/I422/I444. It's related to the
color bit-depth and profile of the codec. It can make configuring
appropriate profile according to bit-depth and format.
https://bugzilla.gnome.org/show_bug.cgi?id=791674
With prenegotiated channels, the data-channel protocol is not used and
instead the channel's negotiation is intended to be performed out of band in
some application-specific manner.
Comes with test!
This means that we will reject all operations before we've transitioned
into READY.
This also fixes the tests using the default GMainContext in the NULL
state instead of the webrtcbin internal GMainContext and thread. Also
removes a potential ordering race where on the element transitioning to
READY, an operations could have been queued on two different threads and
removing a guarentee on operation ordering.
It might be possible that if we set webrtcbin to the NULL state some
tasks (idle sources) are still executed and they might even freeze. The freeze
is caused because the webrtcbin tasks don't hold a reference to webrtcbin and
if it's last unref inside the idle source itself this will not allow the main
loop to finish because the main loop is waiting on the idle source to finish.
We now start and stop webrtcbin thread when changing states. This will allow
the idle sources to finish properly.
https://bugzilla.gnome.org/show_bug.cgi?id=797251
Fixes a race where the task could attempt to set
stream-start/caps/segment before the pad was active and would be
dropped resulting in a 'data-flow before stream-start' warning.
It is possible and often desirable to pass multiple ICE relays
to libnice agents, the "turn-server" property, while convenient
to use from the command line, does not allow that.
This adds a new action signal, "add-turn-server" to address that.
https://bugzilla.gnome.org/show_bug.cgi?id=797012
We now have options for all plugins, so we will just disable these in
the cerbero recipe instead. These require external deps, so they won't
affect gst-build either.
Although RTMP_ConnectStream() was failed, librtmp's internal memory
is not freed by RTMP_ConnectStream(), so RTMP_Close() should be called
before RTMP_Free()
https://bugzilla.gnome.org/show_bug.cgi?id=797058
Worst case it will be empty. This fixes a crash when the base class
calls data_received() when the stream is neither is_isobmff or
has_isoff_ondemand_profile.
https://bugzilla.gnome.org/show_bug.cgi?id=796745
gst_curl_http_src_remove_queue_item() can free qelement and then
we get an invalid memory reference when we do qelement->next a
couple of lines below. Take the next pointer earlier so that we can
safely free.
This fixes an issue with SSA/ASS subtitles, where subtitles
would fail to appear if there was already a subtitle on screen.
This was because `struct _GstAssRender` had a single
`GstBuffer *subtitle_pending` member. This meant that
the assrender context could only be aware of one subtitle
at a time.
This patch changes the subtitle_pending member to a
linked list of pending subtitles.
The `gst_ass_render_chain_text` function no longer needs
to care about whether there are already subtitles pending,
it simply appends new subtitles to the list.
The `gst_ass_render_chain_video` function has been modified
to handle the list of pending subtitles.
Finally, the `gst_ass_render_pop_text` function has been
modified to pop the entire list of pending subtitles.
https://bugzilla.gnome.org/show_bug.cgi?id=735944
When compiling with clang-6 this error raises:
raw_decoder.c:411:1: error: unused function 'cpr1204_crc'
[-Werror,-Wunused-function]
This patch only comments it out.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
When compiling with clang-6 this error pops out:
raw_decoder.c:1011:62: error: implicit conversion from enumeration
type 'const vbi_modulation' to different enumeration type
'vbi3_modulation' [-Werror,-Wenum-conversion]
This is because function vbi3_bit_slicer_set_params() sets
vbi3_modulation as enum type parameter, nonetheless vbi_modulation
enum is passed. Both enums looks semantically equal, thus the fix is a
simple cast.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
This is the native format that is in use by the webrtc audio processing
library internally, so this avoids internal {de,}interleaving and
format conversion (S16->F32 and back)
https://bugzilla.gnome.org/show_bug.cgi?id=793605
This uses the new path for OpenCV headers. OpenCV now have
master headers files per modules, which reduce the amount of
required includes. Note that HIGHGUI was included to get the
imgcodecs includes, which I fixed, though the master header is
missing the C headers, so I included that directly. All the
image stuff should be ported to C++ eventually. Finally, this
patch also update the header checks to reflect the modules that
are really being used.
... instead of doing it ourselves. Otherwise, we should add more
logic here (such as checking GstClock and etc) which was already provided by
GstBaseSrc.
https://bugzilla.gnome.org/show_bug.cgi?id=796842
Relaxed the wl_shell interface constrains, so application that
pass via GstContext the wl_surface can use waylandsink in a
compositor without wl_surface and zwp_fullscreen_shell.
Added support for zwp_fullscreen_shell.
https://bugzilla.gnome.org/show_bug.cgi?id=796772
When scanning paths for LADSPA plugins, don't try and load
every random file as a module, as g_module_open ends up throwing
errors on Windows.
Use a G_MODULE_SUFFIX and GST_EXTRA_MODULE_SUFFIX suffix check as
we do for GStreamer plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=796450
Refactor transportsendbin, and change the way
pads are blocked on dtlssrtpenc so that they
don't interfere with state changes.
As well as being easier to read, this fixes
spurious failures shutting down webrtcbin
if DTLS negotiation hasn't completed yet.
Move the errant piece of dtlssrtpenc state change
management from dtlstransport in the Webrtc libs,
into the transportsendbin that does the rest of
the element management so it's all in one place.
The `CV_RGB` macro is now in `imgproc.hpp`.
Fixes:
../subprojects/gst-plugins-bad/ext/opencv/gsthanddetect.cpp:497:40: error: ‘CV_RGB’ was not declared in this scope
cvCircle (img, center, radius, CV_RGB (0, 0, 200), 1, 8, 0);
^~~~~~
When negotiation is triggered by receiving caps on our sink pad
probes, we could encounter a race condition where need-negotiation
is emitted and the application requires the creation of an offer
before the current caps were actually updated.
This led to retrieving incomplete caps when creating the offer,
using find_codec_preferences -> pad_get_current_caps.
Instead, as we save the caps in the probe callback anyway, it is better
and thread safe to use these if they were set.
https://bugzilla.gnome.org/show_bug.cgi?id=796801
Matches the output from a similar glimagesink pipeline when
rotating from an upstream gltransformation passed through
the affine transformation meta with xpos/ypos being set.
https://bugzilla.gnome.org/show_bug.cgi?id=794401
Fixes random crashes when an allocated webrtcbin isn't
given fresh 0-filled memory in its allocation. It works
mostly because GMutex and GCond are automatically initialised
in that case.
Move freeing of the pad blocks back to before we call the
GstBin state change function, as there's something racy
going on on the build server otherwise, where the pads don't
unblock during downward state changes.
This is a bit of a stab in the dark, since I can't recreate
the build server failure locally.
Release references in pad blocks and release the memory in the
dispose function too, in case the state change doesn't get
run (because calling the parent state change fails).
When changing state downward, we can't set pads
to inactive if they are blocked, it will deadlock
trying to acquire the streaming lock.
Just calling the parent state change function
will do the correct things to unblock probes and
set the pad inactive, so let it do that and
remove the probes after the parent state change
function has run
https://bugzilla.gnome.org/show_bug.cgi?id=796682
When max is GST_CLOCK_TIME_NONE in the query, it should not
be set in the query handler, this otherwise could lead to
impossible situations, where the minimum latency ended up
greater than the maximum.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
The flush function immediately returned when pitch->next_buffer_offset
was 0.
This is clearly wrong, as next_buffer_offset can be 0 when a single
input buffer has been received, and no output buffer has been produced
before receiving EOS.
Simply remove that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
This lets users call gst_pad_get_current_caps on newly-added
pads to easily determine what to plug them into.
We cannot copy sticky events unconditionally in core,
see #719437https://bugzilla.gnome.org/show_bug.cgi?id=796387
This new element allows decoding and overlaying CEA-708 Closed Caption
streams over video.
* Supports CDP and cc_data closedcaption/x-cea-708 streams
* Uses pango to render CC stream
* Support GstVideoOverlayComposition meta if downstream supports is
Tested on various test files.
Remains to be fixed/improved:
* Switch to GstByteReader (for code safety)
* Switch to GString (instead of manual pango string construction)
* Move pango/rendering code outside of main 708 decoder file (so
that actual CC parser/decoder can be (re)used in other scenarios).
Initial patches and improvements by:
* CableLabs RUIH-RI Team <ruihri@cablelabs.com>
* Steve Maynard <steve@secondstryke.com>
* cjun.wang" <cjun.wang@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=704881
zvbi switched to a lot more flexible CC detection in VBI.
The problem is that it returns a *lot* of non-VBI lines as containing
CC which isn't the case.
Current code from zapping/zvbi as of 2018-03-14. Files copied
are all LGPL v2+.
Changes from original zvbi code:
* Switch to gst-debug logging system
* Use glib for endianness detection
* Fix compilation warnings
Allows extracting GstVideoCaptionMeta from a stream and outputs
it to a standalone stream.
Part of a new 'ext' closedcaption plugin, since more features are
going to be added, which will depend on external dependencies such
as pango.
On debian system headers trigger compiler warnings like these,
don't error out on them:
/usr/include/directfb/direct/os/linux/glibc/waitqueue.h:95:1: note: previous definition of ‘direct_waitqueue_signal’ was here
Explicitly cast to void* because GCC 8 is (rightfully) upset that this is
"writing to an object of type ‘...’ with no trivial copy-assignment".
Caused by the new "class-memaccess" warning
This moves all the conversion related code to a single place, allows
less code-duplication inside compositor and makes the glmixer code less
awkward. It's also the same pattern as used by GstAudioAggregator.
The aggregated_frame is now called prepared_frame and passed to the
prepare_frame and cleanup_frame virtual methods directly. For the
currently queued buffer there is a method on the video aggregator pad
now.
Previously we assumed that the texture ID is going to be valid even
after unmapping the frame, as it was immediately unmapped before even
being used. Now we only unmap once we're done with the texture.
During element shutdown, the srtp encryption session
object can be cleaned up. In that case, return GST_FLOW_FLUSHING
from the chain function. Also properly return GST_FLOW_ERROR
upstream during actual errors.
https://bugzilla.gnome.org/show_bug.cgi?id=790508
Store a PTS of a highlight event directly into the event structure,
rather than the GST_EVENT_TIMESTAMP that will probably be removed
in GStreamer 2.0, and is hardly used.
https://bugzilla.gnome.org/show_bug.cgi?id=761477
If that threshold is reached, `iqa` will emit an ERROR message on the
bus, stopping any processing.
This way we can do a simpler comparison with gst-validate and the
process will error out if the specified threshold is reached.
https://bugzilla.gnome.org/show_bug.cgi?id=795428
We don't want to reset the muxer, otherwise the continuity counter will
reset after each segment and some software gets confused. We want to
create a continuous stream.
https://bugzilla.gnome.org/show_bug.cgi?id=794816
There are two issues, both related to dependency checking with the meson
support for the ladspa plugin.
With autotools, lrdf is handled like an optional dependency. But with
meson it is required. This makes the meson support less flexible and
inconsistent with autotools.
When autotools is used it properly checks if ladspa.h is available.
But with meson it does not, instead it treats lrdf as the main
dependency. This could cause a build failure if lrdf is installed, but
the ladspa sdk is not.
https://bugzilla.gnome.org/show_bug.cgi?id=794350
Strictly speaking, the TTML spec requires that text backgrounds extend
only to the font height of the related text, rather than to the vertical
distance between lines. The result of this is that there will typically
be vertical gaps between line backgrounds through which moving video can
be seen. Since this was unnacceptable to some content providers, v1.0.1
of the IMSC spec (which profiles TTML) adds a new attribute,
itts:fillLineGap[1], that allows content authors to specify that clients
should extend text backgrounds such that there are no gaps between
lines. This attribute is also going to be included in the next release
of EBU-TT-D.
This patch adds support for fillLineGap to ttmlparse and ttmlrender.
[1] https://www.w3.org/TR/ttml-imsc1.0.1/#itts-fillLineGaphttps://bugzilla.gnome.org/show_bug.cgi?id=787071
Fixes ffeb09e4ab
if (sscanf(...)) { // != 0
error;
}
Is not correct where != 0 indicates some kind of success.
Check instead that the correct number of elements were slurped.
SDP's are generated and consumed according to the W3C PeerConnection API
available from https://www.w3.org/TR/webrtc/
The SDP is either created initially from the connected
sink pads/attached transceivers as in the case of generating an offer or
intersected with the connected sink pads/attached transceivers as in
the case for creating an answer. In both cases, the rtp payloaded streams
sent by the peer are exposed as separate src pads.
The implementation supports trickle ICE, RTCP muxing, reduced size RTCP.
With contributions from:
Nirbheek Chauhan <nirbheek@centricular.com>
Mathieu Duponchelle <mathieu@centricular.com>
Edward Hervey <edward@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792523
By removing the indirection to the main loop completely when receiving
the peer certificate. For reference, the on-decoder-key signal does not
have a redirection.
We call the base class first as this will remove the pad from
the aggregator, thus stopping misc callbacks from being called,
one of which (process_textures) will recreate the vertex_buffer
if it is destroyed
https://bugzilla.gnome.org/show_bug.cgi?id=760873
For libsrtp 1, add defines that translate the new namespaced identifiers
to the old unnamespaced ones. Also move the code for setting and getting
a stream's ROC into two compat functions that match libsrtp2's API.
It seems that libsrtp2 properly supports changing the ROC without having
to touch the sequence numbers afterwards, given that srtp_set_stream_roc
sets a pending_roc field, so the entire roc_changed dance should not be
needed anymore. The compat functions for libsrtp 1 just contain our
preexisting hacks, however, so it's still needed there.
libsrtp2 has no means of discovering the streams in the session, so to
create the stats structure we need to iterate over our own set of SSRCs.
For this we also need to re-add the previously removed ssrcs_set to the
encoder.
https://bugzilla.gnome.org/show_bug.cgi?id=776901
Fix regression when used in combination with new flvmux which was
ported to GstAggregator, and which sends plain video/x-flv caps
before sending full caps that include streamheaders.
Instead of a massive if/else/if/else/if/else/...:
* Use a common cleanup path for allocated items just before leaving
the function (which will be free-d only if we're not dealing with
a delayed SPU).
* "goto" that cleanup path wherever needed
CID #1427096
CID #1427114
In file included from ../../../gst-plugins-bad/ext/gl/gstopengl.c:47:0:
../../../gst-plugins-bad/ext/gl/gstglmixerbin.h:25:29: fatal error: gst/video/video.h: No such file or directory
This is to mimic LV2 and what is commonly documented over the
web. We also completely track these directories when updating
the cache now. Unlike LV2, the plugins are flat in the plugin
directories, so no need for the recursive lookup. This also fixes
support for Fedora and other architecture using lib64 as a libdir.
While keeping it simple, this patch tries and mimic lilv default path.
It does not matter if some path are duplicated due to symlink because in
the end it's lilv that will walk these paths. The worst case is that we
update our cache more often then strictly needed.
https://bugzilla.gnome.org/show_bug.cgi?id=791717
The AVERAGE-BANDWIDTH attribute in the EXT-X-STREAM-INF tag represents
the average segment bit rate of the Variant Stream, while the BANDWIDTH
attribute represents the peak segment bit rate of the Variant Stream.
(https://tools.ietf.org/html/draft-pantos-http-live-streaming-23#section-4.3.4.2)
Using the average bit rate instead of the peak bit rate for variant switching
is more efficient and appropriate. Sometimes due to VBR encoding,
the BANDWIDTH may represent a value way above the average bit rate,
which could result to players not switching to that variant stream
although network bandwidth is sufficiently available.
https://bugzilla.gnome.org/show_bug.cgi?id=790821
gstsrt.c: In function ‘gst_srt_client_connect_full’:
gstsrt.c:151:6: error: ‘sock’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (sock != SRT_INVALID_SOCK) {
https://bugzilla.gnome.org/show_bug.cgi?id=791302
When compiling with clang, an enum conversion error is triggered
since GstVideoFrameFlags are not GstVideoFlags.
This patch sets GST_VIDEO_FRAME_FLAG_NONE to the added video meta.
https://bugzilla.gnome.org/show_bug.cgi?id=791251
This patch adds code to gldownload to export the image as a
dmabuf if requested. The element now exposes memory:DMABuf as
a cap feature, and if it is selected, the element exports the
texture to an EGL image and then a dmabuf. It also implements a
fallback to system memory download in case the exportation failed.
https://bugzilla.gnome.org/show_bug.cgi?id=776927
We change the video info base on the received buffer. We need to
rollback these changes whenever we want to copy into our internal
pool of buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=790057
The SHM interface does not allow passing arbitrary strides and offsets,
for this reason, we simply disable this feature from the proposed pool.
This fixes video artifact seen when using the FFMPEG based video
decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=790057
This reverts commit 47fd4d391e.
This patch is incorrect. It doesn't actually compile, and causes a crash
because the viv-fb window implementation needs a native EGL handle
to pass to fbCreateWindow, but the GstGLDisplayEGL handleis actually
an EGLDisplay now (and gets cast to the wrong type)
SRT[0] is an open source transport technology[1] that optimizes
streaming performance across unpredictable networks.
Although SRT is based on UDP, it works like connection-oriented
protocol. However, it doesn't mean that the SRT server or client
is necessarily to link to a receiver or a sender so, here, the
pairs of source and sink elements are introduced.
- srtserversink: SRT server to feed SRT stream
- srtclientsrc: SRT client to get SRT stream from srtserversink
- srtclientsink: SRT client to send SRT stream
- srtserversrc: SRT server to listen from srtclientsink
[0] https://github.com/Haivision/srt
[1] http://www.srtalliance.org/https://bugzilla.gnome.org/show_bug.cgi?id=785730
OpenJPEG 2.3 installs its headers to /usr/include/openjpeg-2.3. However,
since libopenjp2.pc seems to provide the right includedir CFLAGS at
least since version 2.1, instead of adding yet another version check,
just remove the subdir and the check for 2.2.
https://bugzilla.gnome.org/show_bug.cgi?id=788703
It is legal for a stream to reuse segments (marking discontinuities as
needed). Uplynk delivers such playlists for their placeholder loops.
Leave the URI scanning in place for playlists which have no
EXT-X-MEDIA-SEQUENCE tag. This should be harmless since the spec
requires these playlists to not be missing segments (RFC8216 6.2.2),
so we should be always matching on the first segment.
https://bugzilla.gnome.org/show_bug.cgi?id=788417
The function was basically one big if-else. Move the branch to the
one caller.
Currently, it's never called with previous_files == NULL. Assert that
this continues.
https://bugzilla.gnome.org/show_bug.cgi?id=788417
This simplifies the code a lot without any functional changes apart from
not closing the display connection. Closing the display connection is
not safe to do as it is shared between all other code in the same
process and no reference counting or anything happens at the platform
layer.
Ensure that region backgrounds are always show when tts:showBackground
is not explicitly set, in accordance with the default behavour given in
the TTML spec.
https://bugzilla.gnome.org/show_bug.cgi?id=787942
when using internal window, window resize should work
when pause state, but expose only do redisplay when
window_id is valid. So expose should do redisplay all
the time.
https://bugzilla.gnome.org/show_bug.cgi?id=787394
Move the package defines for GST_PLUGIN_DEFINE from the
command line into the source file to avoid quoting issues
(-DPACKAGE_NAME="foo" means the quotes won't actually make
it to the compiler and then it no longer gets a string constant).
1. Propagate the GstGLDisplay we create
2. Add the created GstGLContext to the propagated GstGLDisplay
Otherwise with multi-branch GL pipelines involving gtkglsink, things
will fall apart and errors will be genarated somewhere.
Except for gst/gl/gstglfuncs.h
It is up to the client app to include these headers.
It is coherent with the fact that gstreamer-gl.pc does not
require any egl.pc/gles.pc. I.e. it is the responsability
of the app to search these headers within its build setup.
For example gstreamer-vaapi includes explicitly EGL/egl.h
and search for it in its configure.ac.
For example with this patch, if an app includes the headers
gst/gl/egl/gstglcontext_egl.h
gst/gl/egl/gstgldisplay_egl.h
gst/gl/egl/gstglmemoryegl.h
it will *no longer* automatically include EGL/egl.h and GLES2/gl2.h.
Which is good because the app might want to use the gstgl api only
without the need to bother about gl headers.
Also added a test: cd tests/check && make libs/gstglheaders.check
https://bugzilla.gnome.org/show_bug.cgi?id=784779
This is useful for autoplay for example. With autoplay, it is necessary to
wait until the scene graph is fully set up. This signal is emitted once the
QML item node is ready. So, inside a connected slot, the pipeline's state
can be set to PLAYING to automatically start playback as soon as the QML
script is loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=786246
OpenJPEG 2.2 has some API changes and thus ships its headers in a new
include path. Add a configure check (to both meson and autoconf) to
detect the newer version of OpenJPEG and add conditional includes.
Fix the autoconf test for OpenJPEG 2.1, which checked for HAVE_OPENJPEG,
which was always set even for 2.0.
https://bugzilla.gnome.org/show_bug.cgi?id=786250
Otherwise we will get it again later for output, however this frame will
never actually be output so we will shift timestamps.
This is especially bad if we're handling a live stream where the first
frames are not keyframes. We would output the keyframe with the
timestamp of the first frame, and everything would be too late when
arriving in the sink.
If the version of the curl library is recent enough to allow support
for HTTP2 (i.e. CURL_VERSION_HTTP2 is defined) but does not actually
have that feature enabled, the call to
g_object_class_install_property() uses an incorrect default value for
the "http-version" property. The default should be 1.1 if HTTP2 is
not supported by libcurl or if not enabled by libcurl.
https://bugzilla.gnome.org/show_bug.cgi?id=786049
Previously this was broken, because a flushing seek causes unlock()
to be called and in the implementation of unlock() we close the
socket, so the seek errors out.
This patch fixes it by re-connecting before the seek.
Unfortunately, a seek does not work properly right after
re-connecting, so a small hack is also in place: we read 1 buffer
before seeking to allow librtmp to do its processing in RTMP_Read()
https://bugzilla.gnome.org/show_bug.cgi?id=785941
In some cases, it is possible that we need to update the manifest before
pads have been exposed at all. If there are no current pads, just expose
the next prepared streams. This doesn't handle the case where a manifest
update would happen while a live streams is changing periods, which is a
type of use case that we're unaware of real usages yet.
https://bugzilla.gnome.org/show_bug.cgi?id=783028
QML can destroy the video widget at any time, leaving
us with a dangling pointer. Use a lock and a proxy
object to cope with that, and block in the widget
destructor if there are ongoing calls into the widget.
Add a function to install the default RGBA pad templates,
but don't make them required so that there can be
GstGLFilter sub-classes with different input/output
caps if they want. Remove the hard-coded RGBA restriction in
the set_caps_features call, as it will be taken care
of by intersecting with the pad templates.
Update all the sub-classes to match
Build fails in ext/vulkan/xcb and ext/vulkan/wayland when:
* building from tarball
* building out-of-tree
* Only one WSI integration (xcb or wayland) is enabled by configure.ac
This is because vkconfig.h from source directory gets used instead
of the generated one.
Add the correct build directory to "-I". Use angle bracket
include in vkapi.h so that it actually looks in the include search
path instead of defaulting to the same (source tree) directory.
https://bugzilla.gnome.org/show_bug.cgi?id=784539
