Commit graph

1197 commits

Author SHA1 Message Date
Seungha Yang
02bf1dbf1f d3d11window: Fix scale factor setting
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5602>
2023-11-07 11:19:31 +00:00
Seungha Yang
0bcddfc894 d3d11: Enable DirectXMath SIMD
* Enable SIMD except for x86 target
* Use aligned matrix struct
* Remove unnecessary matrix copy operations

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5602>
2023-11-07 11:19:31 +00:00
Seungha Yang
b12d43bd89 wasapi2device: Ignore activation failed device
Enumerates all devices even if activation error is detected

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3090
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5599>
2023-11-06 12:28:50 +00:00
Marek Vasut
5d2d602e4a v4l2codecs: Avoid QBUF/DQBUF struct timeval .tv_usec wrap-around at frame 1000000
When decoding stream using hardware V4L2 decoder element, in any of the
currently supported formats, the decoding will fail once frame number
1000000 is reached. The reported error clearly indicates a wrap-around
occured, instead of receiving decoded frame 1000000, frame 0 is received
from the hardware V4L2 decoder driver.

The problem is actually not in the driver itself, but rather in gstreamer,
which uses `struct v4l2_buffer` member `.timestamp` in a special way. The
timestamp of buffers with encoded data added to the SINK (input) queue of
the driver is copied by the driver into matching buffers with decoded data
added to the SOURCE (output) queue of the driver. In fact, the timestamp
is not a timestamp at all, but rather in this special case, only part of
it is used as an incrementing frame counter.

The `.timestamp` is of type `struct timeval`, which is defined in
`sys/time.h` [1]. Only the `tv_usec` member of this structure is used
for the incrementing frame counter. However, suseconds_t tv_usec [2]
may be limited to range [-1, 1000000]:
"
[XSI] The type suseconds_t shall be a signed integer type capable of
      storing values at least in the range [-1, 1000000].
"
Therefore, once frame 1000000 is reached, a rollover occurs and decoding
fails.

Fix this by using both `struct timeval` members, `.tv_sec` and `.tv_usec`
with matching modular arithmetic, this way the failure would occur again
just short of 2^84 frames, which should be plenty.

[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_time.h.html
[2] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_types.h.html

A test case using stateless hardware h264 decoder, the WARN/ERROR output
in gstreamer log indicates a failure occurred. With this change, that
error no longer occurs and the WARN/ERROR are not present:
```
pc$ gst-launch-1.0 videotestsrc num-buffers=1001001 pattern=6 ! \
                   video/x-raw,width=16,height=16,format=I420 ! \
                   x264enc ! filesink location=/tmp/test.h264

dut$ GST_DEBUG="*:3" gst-launch-1.0 filesrc location=/tmp/test.h264 ! \
                                    h264parse ! v4l2slh264dec ! fakesink
...
0:03:51.393677606 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000000, but driver returned frame 0.
0:03:51.394140597 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000001, but driver returned frame 1.
0:03:51.394425216 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000002, but driver returned frame 2.
0:03:51.394665211 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000003, but driver returned frame 3.
0:03:51.394785833 12111     0x370df400 WARN      \
  v4l2codecs-h264dec gstv4l2codech264dec.c:1059:gst_v4l2_codec_h264_dec_output_picture:<v4l2slh264dec0> \
  error: Failed to decode frame 1000000
ERROR: from element /GstPipeline:pipeline0/v4l2slh264dec:v4l2slh264dec0: Failed to decode frame 1000000
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5598>
2023-11-04 15:51:45 +01:00
Seungha Yang
34d221dad5 wasapi2: Fix build with GST_DISABLE_GST_DEBUG
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5585>
2023-11-03 13:31:03 +00:00
Seungha Yang
8009f5275a mediafoundation: Fix build with GST_DISABLE_GST_DEBUG
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5585>
2023-11-03 13:31:03 +00:00
Seungha Yang
c3cef6e923 d3d12: Fix build with GST_DISABLE_GST_DEBUG
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5585>
2023-11-03 13:31:03 +00:00
Seungha Yang
033f98ad86 d3d11: Set MaxAnisotropy value for the best quality
... and use anisotropic filter without comparison, which is actually
intended one.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5580>
2023-11-01 15:41:08 +00:00
Seungha Yang
ac265bc4f9 d3d11overlaycompositor: Avoid heap allocation per upload
Don't allocate list per upload

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5580>
2023-11-01 15:41:08 +00:00
Seungha Yang
107edc0c07 d3d11videosink: Add redraw-on-update property
If users update geometry related properties very frequently
for a stream to be animated, redrawing on every update
can make rendering choppy or can be a performance bottleneck.
To address the issue, adding a property to control the behavior
of redrawing scene when geometry related properties are updated.

Also, do not resize swapchain on such property update, since
re-allocating backbuffer and multi-sampled render target is
unnecessary in that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5575>
2023-10-30 11:15:35 +00:00
Seungha Yang
795e1bac34 d3d11videosink: Fix window switching in case of fullscreen mode
Other Windows applications allow window switching even when
an application window is in fullscreen mode. Also fixing
regression introduced in 15248d8b84
which makes restored window is always located at topmost
since we do not call SetWindowPos() anymore when restoring

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5574>
2023-10-29 22:45:17 +09:00
Seungha Yang
e7069984df d3d11videosink: Add sampling-method property
Identical to "method" property in d3d11convert element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 23:12:30 +09:00
Seungha Yang
b16665dc75 d3d11convert: Add support for sampling with anisotropic filter
Anisotropic filtering might produce better quality than linear filtering

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:56:28 +09:00
Seungha Yang
af31b46992 d3d11convert: Add support for transform
Adding 3D rotation and scale transform support to d3d11convert element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
1813b4e3d9 d3d11: Move transform matrix related method to utils
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
3a2a31d18b d3d11overlaycompositor: Set rasterizer state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
4dfdb6ec68 d3d11screencapturesrc: Set rasterizer state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
5389cc2cc3 d3d11compositor: Set rasterizer state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
1a82c9b9ab d3d11testsrc: Set rasterizer state
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:12:17 +09:00
Seungha Yang
e13612162b d3d11screencapturesrc: Use DirectXMath struct and C++ mutex
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5572>
2023-10-28 22:11:53 +09:00
Seungha Yang
63bb0b8de7 d3d11videosink: Add support for transform and MSAA
Adding properties for 3D rotation with arbitrary angle
and scaling. And adding Multi Sampling Anti-Aliasing rendering
support to smooth borders if arbitrary angle is applied

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5532>
2023-10-28 09:58:16 +00:00
Seungha Yang
0b45548f18 d3d11videosink: Fix typo
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5532>
2023-10-28 09:58:16 +00:00
Seungha Yang
745a73eece wasapi2: Don't use global volume control object
ISimpleAudioVolume controls volume of corresponding audio session
and there would be only single input/output audio session
in case of share-mode, which means that it controls audio volume of the
process. Instead, use IAudioStreamVolume interface which controls
volume of the stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5549>
2023-10-27 18:11:51 +00:00
Seungha Yang
bdc0f177f0 d3d11screencapturesrc: Fix mouse cursor blending
Ignore alpha component of source (mouse cursor texture)
when blending alpha channel, otherwise the background area of source
(which has zeros) will be written to render target. Then it will result
in black rectangle if output texture is converted to premultiplied alpha
texture

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5566>
2023-10-27 16:33:04 +00:00
Sebastian Dröge
e6ff644bac aja: Move clang-format configuration from the top-level to the plugin subdirectory
This shouldn't have been left at the top-level but was forgotten to be
moved when merging the repository histories.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5558>
2023-10-27 11:44:36 +00:00
Sebastian Dröge
1b117e666b aja: Add basic documentation
Also remove the `gst-inspect-1.0` output from the README.md. This is
listed in the actual documentation and more up to date there.
2023-10-26 09:36:10 +03:00
Sebastian Dröge
59f4146bdc aja: Integrate AJA plugin into the build system
Co-Authored-By: Nirbheek Chauhan <nirbheek@centricular.com>
2023-10-26 09:36:09 +03:00
Sebastian Dröge
d2d947380e Merge AJA audio/video source/sink plugin
Original location is https://github.com/centricular/gst-aja
2023-10-26 09:35:52 +03:00
Sebastian Dröge
f1a1dadbf3 Prepare for merging into GStreamer 2023-10-26 09:27:46 +03:00
Seungha Yang
2aa841e74b mfvideoencoder: Fix typo in template caps
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3058
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5554>
2023-10-25 23:19:51 +09:00
Adrien De Coninck
65365caa21 d3d11videosink: post "have-window-handle" element message on the bus
* when window_id is not user-provided and window_type==GST_D3D11_WINDOW_NATIVE_TYPE_HWND
* allows user to retrieve internally created window handle
  * for custom positionning
  * for custom icons
  * ...

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5544>
2023-10-24 16:32:36 +02:00
David Rosca
8aac08506a va: Use vaMapBuffer2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5467>
2023-10-23 19:40:16 +00:00
Piotr Brzeziński
e79b308f82 vtdec: Fix deadlock when attempting to negotiate
This was wrongly calling the base class method, which unnecessairly took the stream lock, already taken by
handle_frame(). The drain() call in negotiate() would then wait for the output loop to pause, while that loop
is stuck waiting to take the stream lock, thus causing a deadlock.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5521>
2023-10-20 13:50:16 +02:00
Nicolas Dufresne
41f478e97d v4l2codecs: h265: Fix entry_point_offsets array leak
This array was being leaked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5499>
2023-10-17 15:06:26 -04:00
Seungha Yang
e2790d635c d3d11screencapturesrc: Fix HWND capture mode
Use per-monitor-aware context to cover different DPI settings per
monitor

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2425
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5485>
2023-10-16 01:02:36 +09:00
Seungha Yang
c5d60cee01 d3d12decoder: Hide non-default device from docs
... and add since marker

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5481>
2023-10-14 12:32:46 +00:00
Seungha Yang
8a35c8a2a5 d3d11compositor: Fix typo in property description
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5481>
2023-10-14 12:32:46 +00:00
Seungha Yang
0a05ba3f62 nvencoder: Add support for new preset/tune/multi-pass options
Adding new P1 ~ P7 presets and deprecate old preset values.
Also adding tune and multi-pass properties.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5428>
2023-10-14 11:03:40 +00:00
Rahul T R
6fbe4d55c4 kmssink: Add TIDSS auto-detection
Add Texas Instruments TIDSS display controller into list of
auto-detected modules.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5469>
2023-10-12 18:25:50 +00:00
Seungha Yang
ed29c23e86 d3d12, dwrite, va: Fix various msys2 build error/warning
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5454>
2023-10-12 10:53:58 +00:00
Mengkejiergeli Ba
c14f4cda0c msdkvpp: Use filter flag to handle passthrough for tone mapping
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5449>
2023-10-12 05:02:37 +00:00
Seungha Yang
c2ed8759c8 d3d11videosink: Don't use DXGI_ALPHA_MODE_PREMULTIPLIED for HWND swapchain
It's allowed only for a swapchain type which does composition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5464>
2023-10-11 22:22:56 +00:00
Seungha Yang
7b564619cf d3d11videosink: Fix rendering with initial fullscreen state
Change fullscreen mode once the swapchain is fully configured

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5462>
2023-10-11 21:39:11 +00:00
Seungha Yang
15248d8b84 d3d11videosink: Fix toggling between fullscreen and maximized
Use GetWindowPlacement() and SetWindowPlacement() APIs
to remember and restore window status, such as maximized, position,
restore position, etc.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3016
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5462>
2023-10-11 21:39:11 +00:00
Seungha Yang
f52ecb9607 d3d11converter: Add support for HLSL precompile and bytecode caching
Precompile pixel shaders for simple conversion path
(without gamma/primaries conversion) in case of MSVC build.
Even if runtime compile is required (cross-compiled or complex conversion
path), do it only once and reuse the compiled bytecode.

This precompile/caching can save about 95% of time taken by
gst_d3d11_converter_new() call.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3004
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5457>
2023-10-11 18:40:46 +00:00
Seungha Yang
83a576e854 d3d11: Reuse sampler object
The linear sampler object can be reused

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5457>
2023-10-11 18:40:46 +00:00
Seungha Yang
92cc5722c8 d3d11: Pass HLSL source size to compile function
The string size is known at build time

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5457>
2023-10-11 18:40:46 +00:00
Seungha Yang
bfdea297d2 d3d11converter: Set alpha-mode using config
... and disallow runtime alpha-mode update for now

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5457>
2023-10-11 18:40:46 +00:00
Seungha Yang
8fe26c8a10 d3d11: Simplify HLSL build
Unify source/header/entrypoint names

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5457>
2023-10-11 18:40:46 +00:00
Nicolas Dufresne
88fd9908fe v4l2codecs: Fix tiled formats stride conversion
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.

  gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5458>
2023-10-11 14:13:53 +00:00