Update license, readme

This commit is contained in:
asonix 2022-10-29 12:49:07 -05:00
parent 0b0ed56bad
commit a48ef32d54
4 changed files with 698 additions and 411 deletions

2
Cargo.lock generated
View file

@ -279,7 +279,7 @@ checksum = "216261ddc8289130e551ddcd5ce8a064710c0d064a4d2895c67151c92b5443f6"
[[package]] [[package]]
name = "ap-relay" name = "ap-relay"
version = "0.3.22" version = "0.3.23"
dependencies = [ dependencies = [
"activitystreams", "activitystreams",
"activitystreams-ext", "activitystreams-ext",

View file

@ -1,9 +1,9 @@
[package] [package]
name = "ap-relay" name = "ap-relay"
description = "A simple activitypub relay" description = "A simple activitypub relay"
version = "0.3.22" version = "0.3.23"
authors = ["asonix <asonix@asonix.dog>"] authors = ["asonix <asonix@asonix.dog>"]
license-file = "LICENSE" license = "AGPL-3.0"
readme = "README.md" readme = "README.md"
repository = "https://git.asonix.dog/asonix/ap-relay" repository = "https://git.asonix.dog/asonix/ap-relay"
keywords = ["activitypub", "relay"] keywords = ["activitypub", "relay"]

1000
LICENSE

File diff suppressed because it is too large Load diff

135
README.md
View file

@ -1,6 +1,35 @@
# AodeRelay # AodeRelay
_A simple and efficient activitypub relay_ _A simple and efficient activitypub relay_
### Installation
#### Docker
If running docker, you can start the relay with the following command:
```
$ sudo docker run --rm -it \
-v "./:/mnt/" \
-e ADDR=0.0.0.0 \
-e SLED_PATH=/mnt/sled/db-0.34 \
-p 8080:8080 \
asonix/relay:0.3.23
```
This will launch the relay with the database stored in "./sled/db-0.34" and listening on port 8080
#### Cargo
With cargo installed, the relay can be installed to your cargo bin directory with the following command
```
$ cargo install ap-lreay
```
Then it can be run with this:
```
$ ADDR=0.0.0.0 relay
```
This will launch the relay with the database stored in "./sled/db-0.34" and listening on port 8080
#### Source
The relay can be launched directly from this git repository with the following commands:
```
$ git clone https://git.asonix.dog/asonix/relay
$ ADDR=0.0.0.0 cargo run --release
```
### Usage ### Usage
To simply run the server, the command is as follows To simply run the server, the command is as follows
```bash ```bash
@ -34,13 +63,59 @@ $ ./relay -a asonix.dog blimps.xyz
$ ./relay -ua asonix.dog blimps.xyz $ ./relay -ua asonix.dog blimps.xyz
``` ```
Allowed domains are only checked against incoming activities if `RESTRICTED_MODE` is enabled. ### Configuration
Blocks can be published in the nodeinfo metadata by setting `PUBLISH_BLOCKS` to true By default, all these values are set to development values. These are read from the environment, or
from the `.env` file in the working directory.
```env
HOSTNAME=localhost:8080
ADDR=127.0.0.1
PORT=8080
DEBUG=true
RESTRICTED_MODE=false
VALIDATE_SIGNATURES=false
HTTPS=false
PRETTY_LOG=true
PUBLISH_BLOCKS=false
SLED_PATH=./sled/db-0.34
```
To run this server in production, you'll likely want to set most of them
```env
HOSTNAME=relay.my.tld
ADDR=0.0.0.0
PORT=8080
DEBUG=false
RESTRICTED_MODE=false
VALIDATE_SIGNATURES=true
HTTPS=true
PRETTY_LOG=false
PUBLISH_BLOCKS=true
SLED_PATH=./sled/db-0.34
OPENTELEMETRY_URL=localhost:4317
```
For advanced setups, it may be useful to run the relay API and the background tasks in separate #### Descriptions
processes, possibly on separate hosts. The `-j` and `-n` flags have been provided for this purpose. ##### `HOSTNAME`
By passing `-n`, a relay can be spawned that handles no deliveries. By passing `-j`, a relay will The domain or IP address the relay is hosted on. If you launch the relay on `example.com`, that would be your HOSTNAME. The default is `localhost:8080`
not be spawned, but any deliveries existing in the database will be processed. ##### `ADDR`
The address the server binds to. By default, this is `127.0.0.1`, so for production cases it should be set to `0.0.0.0` or another public address.
##### `PORT`
The port the server binds to, this is `8080` by default but can be changed if needed.
##### `DEBUG`
Whether to print incoming activities to the console when requests hit the /inbox route. This defaults to `true`, but should be set to `false` in production cases. Since every activity sent to the relay is public anyway, this doesn't represent a security risk.
##### `RESTRICTED_MODE`
This setting enables an 'allowlist' setup where only servers that have been explicitly enabled through the `relay -a` command can join the relay. This is `false` by default. If `RESTRICTED_MODE` is not enabled, then manually allowing domains with `relay -a` has no effect.
##### `VALIDATE_SIGNATURES`
This setting enforces checking HTTP signatures on incoming activities. It defaults to `false` but should be set to `true` in production scenarios
##### `HTTPS`
Whether the current server is running on an HTTPS port or not. This is used for generating URLs to the current running relay. By default it is set to `false`, but should be `true` in production scenarios.
##### `PUBLISH_BLOCKS`
Whether or not to publish a list of blocked domains in the `nodeinfo` metadata for the server. It defaults to `false`.
##### `SLED_PATH`
Where to store the on-disk database of connected servers. This defaults to `./sled/db-0.34`.
##### `SOURCE_REPO`
The URL to the source code for the relay. This defaults to `https://git.asonix.dog/asonix/relay`, but should be changed if you're running a fork hosted elsewhere.
##### `OPENTELEMETRY_URL`
A URL for exporting opentelemetry spans. This is mostly useful for debugging. There is no default, since most people probably don't run an opentelemetry collector.
### Subscribing ### Subscribing
Mastodon admins can subscribe to this relay by adding the `/inbox` route to their relay settings. Mastodon admins can subscribe to this relay by adding the `/inbox` route to their relay settings.
@ -71,46 +146,14 @@ example, if the server is `https://relay.my.tld`, the correct URL would be
- Webfinger - Webfinger
- NodeInfo - NodeInfo
### Configuration
By default, all these values are set to development values. These are read from the environment, or
from the `.env` file in the working directory.
```env
HOSTNAME=localhost:8080
ADDR=127.0.0.1
PORT=8080
DEBUG=true
RESTRICTED_MODE=false
VALIDATE_SIGNATURES=false
HTTPS=false
DATABASE_URL=
PRETTY_LOG=true
PUBLISH_BLOCKS=false
```
To run this server in production, you'll likely want to set most of them
```env
HOSTNAME=relay.my.tld
ADDR=0.0.0.0
PORT=8080
DEBUG=false
RESTRICTED_MODE=false
VALIDATE_SIGNATURES=true
HTTPS=true
DATABASE_URL=postgres://pg_user:pg_pass@pg_host:pg_port/pg_database
PRETTY_LOG=false
PUBLISH_BLOCKS=true
```
### Contributing ### Contributing
Unless otherwise stated, all contributions to this project will be licensed under the CSL with Feel free to open issues for anything you find an issue with. Please note that any contributed code will be licensed under the AGPLv3.
the exceptions listed in the License section of this file.
### License ### License
This work is licensed under the Cooperative Software License. This is not a Free Software Copyright © 2022 Riley Trautman
License, but may be considered a "source-available License." For most hobbyists, self-employed
developers, worker-owned companies, and cooperatives, this software can be used in most AodeRelay is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
projects so long as this software is distributed under the terms of the CSL. For more
information, see the provided LICENSE file. If none exists, the license can be found online AodeRelay is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. This file is part of AodeRelay.
[here](https://lynnesbian.space/csl/). If you are a free software project and wish to use this
software under the terms of the GNU Affero General Public License, please contact me at You should have received a copy of the GNU General Public License along with AodeRelay. If not, see [http://www.gnu.org/licenses/](http://www.gnu.org/licenses/).
[asonix@asonix.dog](mailto:asonix@asonix.dog) and we can sort that out. If you wish to use this
project under any other license, especially in proprietary software, the answer is likely no.