gstreamer/markdown/tutorials/basic/playback-speed.md

Basic tutorial 13: Playback speed

{{ ALERT_PY.md }}

{{ ALERT_JS.md }}

Goal

Fast-forward, reverse-playback and slow-motion are all techniques collectively known as trick modes and they all have in common that modify the normal playback rate. This tutorial shows how to achieve these effects and adds frame-stepping into the deal. In particular, it shows:

• How to change the playback rate, faster and slower than normal, forward and backwards.
• How to advance a video frame-by-frame

Introduction

Fast-forward is the technique that plays a media at a speed higher than its normal (intended) speed; whereas slow-motion uses a speed lower than the intended one. Reverse playback does the same thing but backwards, from the end of the stream to the beginning.

All these techniques do is change the playback rate, which is a variable equal to 1.0 for normal playback, greater than 1.0 (in absolute value) for fast modes, lower than 1.0 (in absolute value) for slow modes, positive for forward playback and negative for reverse playback.

GStreamer provides two mechanisms to change the playback rate: Step Events and Seek Events. Step Events allow skipping a given amount of media besides changing the subsequent playback rate (only to positive values). Seek Events, additionally, allow jumping to any position in the stream and set positive and negative playback rates.

In seek events have already been shown, using a helper function to hide their complexity. This tutorial explains a bit more how to use these events.

Step Events are a more convenient way of changing the playback rate, due to the reduced number of parameters needed to create them; however, they have some downsides, so Seek Events are used in this tutorial instead. Step events only affect the sink (at the end of the pipeline), so they will only work if the rest of the pipeline can support going at a different speed, Seek events go all the way through the pipeline so every element can react to them. The upside of Step events is that they are much faster to act. Step events are also unable to change the playback direction.

To use these events, they are created and then passed onto the pipeline, where they propagate upstream until they reach an element that can handle them. If an event is passed onto a bin element like playbin, it will simply feed the event to all its sinks, which will result in multiple seeks being performed. The common approach is to retrieve one of playbin’s sinks through the video-sink or audio-sink properties and feed the event directly into the sink.

Frame stepping is a technique that allows playing a video frame by frame. It is implemented by pausing the pipeline, and then sending Step Events to skip one frame each time.

A trick mode player

Copy this code into a text file named basic-tutorial-13.c.

basic-tutorial-13.c

{{ tutorials/basic-tutorial-13.c }}

Need help?

If you need help to compile this code, refer to the Building the tutorials section for your platform: Linux, Mac OS X or Windows, or use this specific command on Linux:

gcc basic-tutorial-13.c -o basic-tutorial-13 `pkg-config --cflags --libs gstreamer-1.0`

If you need help to run this code, refer to the Running the tutorials section for your platform: Linux, Mac OS X or Windows.

This tutorial opens a window and displays a movie, with accompanying audio. The media is fetched from the Internet, so the window might take a few seconds to appear, depending on your connection speed. The console shows the available commands, composed of a single upper-case or lower-case letter, which you should input followed by the Enter key.

Required libraries: gstreamer-1.0

Walkthrough

There is nothing new in the initialization code in the main function: a playbin pipeline is instantiated, an I/O watch is installed to track keystrokes and a GLib main loop is executed.

Then, in the keyboard handler function:

/* Process keyboard input */
static gboolean handle_keyboard (GIOChannel *source, GIOCondition cond, CustomData *data) {
  gchar *str = NULL;

  if (g_io_channel_read_line (source, &str, NULL, NULL, NULL) != G_IO_STATUS_NORMAL) {
    return TRUE;
  }

  switch (g_ascii_tolower (str[0])) {
  case 'p':
    data->playing = !data->playing;
    gst_element_set_state (data->pipeline, data->playing ? GST_STATE_PLAYING : GST_STATE_PAUSED);
    g_print ("Setting state to %s\n", data->playing ? "PLAYING" : "PAUSE");
    break;

Pause / Playing toggle is handled with gst_element_set_state() as in previous tutorials.

case 's':
  if (g_ascii_isupper (str[0])) {
    data->rate *= 2.0;
  } else {
    data->rate /= 2.0;
  }
  send_seek_event (data);
  break;
case 'd':
  data->rate *= -1.0;
  send_seek_event (data);
  break;

Use ‘S’ and ‘s’ to double or halve the current playback rate, and ‘d’ to reverse the current playback direction. In both cases, the rate variable is updated and send_seek_event is called. Let’s review this function.

/* Send seek event to change rate */
static void send_seek_event (CustomData *data) {
  gint64 position;
  GstEvent *seek_event;

  /* Obtain the current position, needed for the seek event */
  if (!gst_element_query_position (data->pipeline, GST_FORMAT_TIME, &position)) {
    g_printerr ("Unable to retrieve current position.\n");
    return;
  }

This function creates a new Seek Event and sends it to the pipeline to update the rate. First, the current position is recovered with gst_element_query_position(). This is needed because the Seek Event jumps to another position in the stream, and, since we do not actually want to move, we jump to the current position. Using a Step Event would be simpler, but this event is not currently fully functional, as explained in the Introduction.

/* Create the seek event */
if (data->rate > 0) {
  seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
      GST_SEEK_TYPE_SET, position, GST_SEEK_TYPE_END, 0);
} else {
  seek_event = gst_event_new_seek (data->rate, GST_FORMAT_TIME, GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE,
      GST_SEEK_TYPE_SET, 0, GST_SEEK_TYPE_SET, position);
}

The Seek Event is created with gst_event_new_seek(). Its parameters are, basically, the new rate, the new start position and the new stop position. Regardless of the playback direction, the start position must be smaller than the stop position, so the two playback directions are treated differently.

if (data->video_sink == NULL) {
  /* If we have not done so, obtain the sink through which we will send the seek events */
  g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
}

As explained in the Introduction, to avoid performing multiple Seeks, the Event is sent to only one sink, in this case, the video sink. It is obtained from playbin through the video-sink property. It is read at this time instead at initialization time because the actual sink may change depending on the media contents, and this won’t be known until the pipeline is PLAYING and some media has been read.

/* Send the event */
gst_element_send_event (data->video_sink, seek_event);

The new Event is finally sent to the selected sink with gst_element_send_event().

Back to the keyboard handler, we still miss the frame stepping code, which is really simple:

case 'n':
  if (data->video_sink == NULL) {
    /* If we have not done so, obtain the sink through which we will send the step events */
    g_object_get (data->pipeline, "video-sink", &data->video_sink, NULL);
  }

  gst_element_send_event (data->video_sink,
      gst_event_new_step (GST_FORMAT_BUFFERS, 1, ABS (data->rate), TRUE, FALSE));
  g_print ("Stepping one frame\n");
  break;

A new Step Event is created with gst_event_new_step(), whose parameters basically specify the amount to skip (1 frame in the example) and the new rate (which we do not change).

The video sink is grabbed from playbin in case we didn’t have it yet, just like before.

And with this we are done. When testing this tutorial, keep in mind that backward playback is not optimal in many elements.

Changing the playback rate might only work with local files. If you cannot modify it, try changing the URI passed to playbin in line 114 to a local URI, starting with file:///

Conclusion

This tutorial has shown:

• How to change the playback rate using a Seek Event, created with gst_event_new_seek() and fed to the pipeline with gst_element_send_event().
• How to advance a video frame-by-frame by using Step Events, created with gst_event_new_step().

It has been a pleasure having you here, and see you soon!