gstreamer/sdk-basic-tutorial-debugging-tools.md
2016-06-17 15:47:44 -04:00

8.7 KiB
Raw Blame History

Basic tutorial 11: Debugging tools

Goal

Sometimes things wont go as expected and the error messages retrieved from the bus (if any) just dont provide enough information. Luckily, GStreamer ships with massive amounts of debug information, which usually hint what the problem might be. This tutorial shows:

  • How to get more debug information from GStreamer.

  • How to print your own debug information into the GStreamer log.

  • How to get pipeline graphs

Printing debug information

The debug log

GStreamer and its plugins are full of debug traces, this is, places in the code where a particularly interesting piece of information is printed to the console, along with time stamping, process, category, source code file, function and element information.

The debug output is controlled with the GST_DEBUG environment variable. Heres an example with GST_DEBUG=2:

0:00:00.868050000  1592   09F62420 WARN                 filesrc gstfilesrc.c:1044:gst_file_src_start:<filesrc0> error: No such file "non-existing-file.webm"

As you can see, this is quite a bit of information. In fact, the GStreamer debug log is so verbose, that when fully enabled it can render applications unresponsive (due to the console scrolling) or fill up megabytes of text files (when redirected to a file). For this reason, the logs are categorized, and you seldom need to enable all categories at once.

The first category is the Debug Level, which is a number specifying the amount of desired output:

# Name Description
0 none No debug information is output.
1 ERROR Logs all fatal errors. These are errors that do not allow the core or elements to perform the requested action. The application can still recover if programmed to handle the conditions that triggered the error.
2 WARNING Logs all warnings. Typically these are non-fatal, but user-visible problems are expected to happen.
3 FIXME Logs all "fixme" messages. Those typically that a codepath that is known to be incomplete has been triggered. It may work in most cases, but mauy cause problems in specific instances.
4 INFO Logs all informational messages. These are typically used for events in the system that only happen once, or are important and rare enough to be logged at this level.
5 DEBUG Logs all debug messages. These are general debug messages for events that happen only a limited number of times during an object's lifetime; these include setup, teardown, change of parameters, ...
6 LOG Logs all log messages. These are messages for events that happen repeatedly during an object's lifetime; these include streaming and steady-state conditions. This is used for log messages that happen on every buffer in an element for example.
7 TRACE Logs all trace messages. Those are message that happen very very often. This is for example is each each time the reference count of a GstMiniObject, such as a GstBuffer or GstEvent, is modified.
8 MEMDUMP Logs all memory dump messages. This is the heaviest logging and may include dumping the content of blocks of memory.

To enable debug output, set the GST_DEBUG environment variable to the desired debug level. All levels below that will also be shown (i.e., if you set GST_DEBUG=2, you will get both ERROR and WARNING messages).

Furthermore, each plugin or part of the GStreamer defines its own category, so you can specify a debug level for each individual category. For example, GST_DEBUG=2,audiotestsrc:6, will use Debug Level 6 for the audiotestsrc element, and 2 for all the others.

The GST_DEBUG environment variable, then, is a comma-separated list of category:level pairs, with an optional level at the beginning, representing the default debug level for all categories.

The '*' wildcard is also available. For example GST_DEBUG=2,audio*:6 will use Debug Level 5 for all categories starting with the word audio. GST_DEBUG=*:2 is equivalent to GST_DEBUG=2.

Use gst-launch-1.0 --gst-debug-help to obtain the list of all registered categories. Bear in mind that each plugin registers its own categories, so, when installing or removing plugins, this list can change.

Use GST_DEBUG when the error information posted on the GStreamer bus does not help you nail down a problem. It is common practice to redirect the output log to a file, and then examine it later, searching for specific messages.

The content of each line in the debug output is:

0:00:00.868050000  1592   09F62420 WARN                 filesrc gstfilesrc.c:1044:gst_file_src_start:<filesrc0> error: No such file "non-existing-file.webm"
Example Explained
0:00:00.868050000 Time stamp in HH:MM:SS.sssssssss format since the start of the program
1592 Process ID from which the message was issued. Useful when your problem involves multiple processes
09F62420 Thread ID from which the message was issued. Useful when your problem involves multiple threads
WARN Debug level of the message
filesrc Debug Category of the message
gstfilesrc.c:1044 Source file and line in the GStreamer source code where this message is printed
gst_file_src_start Function from which the message was issued
&lt;filesrc0&gt; Name of the object that issued the message. It can be an element, a Pad, or something else. Useful when you have multiple elements of the same kind and need to distinguish among them. Naming your elements with the name property will make this debug output more readable (otherwise, GStreamer assigns each new element a unique name).
error: No such file &quot;non-existing-file.webm&quot; The actual message.

Adding your own debug information

In the parts of your code that interact with GStreamer, it is interesting to use GStreamers debugging facilities. In this way, you have all debug output in the same file and the temporal relationship between different messages is preserved.

To do so, use the GST_ERROR(), GST_WARNING(), GST_INFO(), GST_LOG() and GST_DEBUG() macros. They accept the same parameters as printf, and they use the default category (default will be shown as the Debug category in the output log).

To change the category to something more meaningful, add these two lines at the top of your code:

GST_DEBUG_CATEGORY_STATIC (my_category);
#define GST_CAT_DEFAULT my_category

And then this one after you have initialized GStreamer with gst_init():

GST_DEBUG_CATEGORY_INIT (my_category, "my category", 0, "This is my very own");

This registers a new category (this is, for the duration of your application: it is not stored in any file), and sets it as the default category for your code. See the documentation for GST_DEBUG_CATEGORY_INIT().

Getting pipeline graphs

For those cases where your pipeline starts to grow too large and you lose track of what is connected with what, GStreamer has the capability to output graph files. These are .dot files, readable with free programs like GraphViz, that describe the topology of your pipeline, along with the caps negotiated in each link.

This is also very handy when using all-in-one elements like playbin or uridecodebin, which instantiate several elements inside them. Use the .dot files to learn what pipeline they have created inside (and learn a bit of GStreamer along the way).

To obtain .dot files, simply set the GST_DEBUG_DUMP_DOT_DIR environment variable to point to the folder where you want the files to be placed. gst-launch-1.0 will create a .dot file at each state change, so you can see the evolution of the caps negotiation. Unset the variable to disable this facility. From within your application, you can use the GST_DEBUG_BIN_TO_DOT_FILE() and GST_DEBUG_BIN_TO_DOT_FILE_WITH_TS() macros to generate .dot files at your convenience.

Here you have an example of the kind of pipelines that playbin generates. It is very complex because playbin can handle many different cases: Your manual pipelines normally do not need to be this long. If your manual pipeline is starting to get very big, consider using playbin.

To download the full-size picture, use the attachments link at the top of this page (It's the paperclip icon).

Conclusion

This tutorial has shown:

  • How to get more debug information from GStreamer using the GST_DEBUG environment variable.
  • How to print your own debug information into the GStreamer log with the GST_ERROR() macro and relatives.
  • How to get pipeline graphs with the GST_DEBUG_DUMP_DOT_DIR environment variable.

It has been a pleasure having you here, and see you soon!