gstreamer/markdown/design/stream-selection.md

Stream selection

History

v0.1: Jun 11th 2015
   Initial Draft
v0.2: Sep 18th 2015
   Update to reflect design changes
v1.0: Jun 28th 2016
   Pre-commit revision

This document describes the events and objects involved in stream selection in GStreamer pipelines, elements and applications

Background

This new API is intended to address the use cases described in this section:

1. As a user/app I want an overview and control of the media streams that can be configured within a pipeline for processing, even when some streams are mutually exclusive or logical constructs only.

2. The user/app can disable entirely streams it's not interested in so they don't occupy memory or processing power - discarded as early as possible in the pipeline. The user/app can also (re-)enable them at a later time.

3. If the set of possible stream configurations is changing, the user/app should be aware of the pending change and be able to make configuration choices for the new set of streams, as well as possibly still reconfiguring the old set

4. Elements that have some other internal mechanism for triggering stream selections (DVD, or maybe some scripted playback playlist) should be able to trigger 'selection' of some particular stream.

5. Indicate known relationships between streams - for example that 2 separate video feeds represent the 2 views of a stereoscopic view, or that certain streams are mutually exclusive.

Note: the streams that are "available" are not automatically the ones active, or present in the pipeline as pads. Think HLS/DASH alternate streams.

Use case examples:

1. Playing an MPEG-TS multi-program stream, we want to tell the app that there are multiple programs that could be extracted from the incoming feed. Further, we want to provide a mechanism for the app to select which program(s) to decode, and once that is known to further tell the app which elementary streams are then available within those program(s) so the app/user can choose which audio track(s) to decode and/or use.

2. A new PMT arrives for an MPEG-TS stream, due to a codec or channel change. The pipeline will need to reconfigure to play the desired streams from new program. Equally, there may be multiple seconds of content buffered from the old program and it should still be possible to switch (for example) subtitle tracks responsively in the draining out data, as well as selecting which subs track to play from the new feed. This same scenario applies when doing gapless transition to a new source file/URL, except that likely the element providing the list of streams also changes as a new demuxer is installed.

3. When playing a multi-angle DVD, the DVD Virtual Machine needs to extract 1 angle from the data for presentation. It can publish the available angles as logical streams, even though only one stream can be chosen.

4. When playing a DVD, the user can make stream selections from the DVD menu to choose audio or sub-picture tracks, or the DVD VM can trigger automatic selections. In addition, the player UI should be able to show which audio/subtitle tracks are available and allow direct selection in a GUI the same as for normal files with subtitle tracks in them.

5. Playing a SCHC (3DTV) feed, where one view is MPEG-2 and the other is H.264 and they should be combined for 3D presentation, or not bother decoding 1 stream if displaying 2D. (bug https://bugzilla.gnome.org/show_bug.cgi?id=719333)

FIXME - need some use cases indicating what alternate streams in HLS might require - what are the possibilities?

Design Overview

Stream selection in GStreamer is implemented in several parts:

1. Objects describing streams : GstStream
2. Objects describing a collection of streams : GstStreamCollection
3. Events from the app allowing selection and activation of some streams: GST_EVENT_SELECT_STREAMS
4. Messages informing the user/application about the available streams and current status: GST_MESSAGE_STREAM_COLLECTION GST_MESSAGE_STREAMS_SELECTED

GstStream objects

• API: GstStream
• API: gst_stream_new(..)
• API: gst_stream_get_*(...)
• API: gst_stream_set_*()
• API: gst_event_set_stream(...)
• API: gst_event_parse_stream(...)

GstStream objects are a high-level convenience object containing information regarding a possible data stream that can be exposed by GStreamer elements.

They are mostly the aggregation of information present in other GStreamer components (STREAM_START, CAPS, TAGS event) but are not tied to the presence of a GstPad, and for some use-cases provide information that the existing components don't provide.

The various properties of a GstStream object are:

• stream_id (from the STREAM_START event)
• flags (from the STREAM_START event)
• caps
• tags
• type (high-level type of stream: Audio, Video, Container,...)

GstStream objects can be subclassed so that they can be re-used by elements already using the notion of stream (which is common for example in demuxers).

Elements that create GstStream should also set it on the GST_EVENT_STREAM_START event of the relevant pad. This helps downstream elements to have all information in one location.

Exposing collections of streams

• API: GstStreamCollection
• API: gst_stream_collection_new(...)
• API: gst_stream_collection_add_stream(...)
• API: gst_stream_collection_get_size(...)
• API: gst_stream_collection_get_stream(...)
• API: GST_MESSAGE_STREAM_COLLECTION
• API: gst_message_new_stream_collection(...)
• API: gst_message_parse_stream_collection(...)
• API: GST_EVENT_STREAM_COLLECTION
• API: gst_event_new_stream_collection(...)
• API: gst_event_parse_stream_collection(...)

Elements that create new streams (such as demuxers) or can create new streams (like the HLS/DASH alternative streams) can list the streams they can make available with the GstStreamCollection object.

Other elements that might generate GstStreamCollections are the DVD-VM, which handles internal switching of tracks, or parsebin and decodebin3 when it aggregates and presents multiple internal stream sources as a single configurable collection.

The GstStreamCollection object is a flat listing of GstStream objects.

The various properties of a GstStreamCollection are:

• 'identifier'
  • the identifier of the collection (unique name)
  • Generated from the 'upstream stream id' (or stream ids, plural)
• the list of GstStreams in the collection.
• (Not implemented) : Flags - For now, the only flag is 'INFORMATIONAL' - used by container parsers to publish information about detected streams without allowing selection of the streams.
• (Not implemented yet) : The relationship between the various streams This specifies which streams are exclusive (can not be selected at the same time), are related (such as LINKED_VIEW or ENHANCEMENT), or need to be selected together.

An element will inform outside components about that collection via:

• a GST_MESSAGE_STREAM_COLLECTION message on the bus.
• a GST_EVENT_STREAM_COLLECTION on each source pads.

Applications and container bin elements can listen and collect the various stream collections to know the full range of streams available within a bin/pipeline.

Once posted on the bus, a GstStreamCollection is immutable. It is updated by subsequent messages with a matching identifier.

If the element that provided the collection goes away, there is no way to know that the streams are no longer valid (without having the user/app track that element). The exception to that is if the bin containing that element (such as parsebin or decodebin3) informs that the next collection is a replacement of the former one.

The mutual exclusion and relationship lists use stream-ids rather than GstStream references in order to avoid circular referencing problems.

Usage from elements

When a demuxer knows the list of streams it can expose, it creates a new GstStream for each stream it can provide with the appropriate information (stream id, flag, tags, caps, ...).

The demuxer then creates a GstStreamCollection object in which it will put the list of GstStream it can expose. That collection is then both posted on the bus (via a GST_MESSAGE_COLLECTION) and on each pad (via a GST_EVENT_STREAM_COLLECTION).

That new collection must be posted on the bus before the changes are made available. i.e. before pads corresponding to that selection are added/removed.

In order to be backwards-compatible and support elements that don't create streams/collection yet, the new 'parsebin' element used by decodebin3 will automatically create those if not provided.

Usage from application

Applications can know what streams are available by listening to the GST_MESSAGE_STREAM_COLLECTION messages posted on the bus.

The application can list the available streams per-type (such as all the audio streams, or all the video streams) by iterating the streams available in the collection by GST_STREAM_TYPE.

The application will also be able to use these stream information to decide which streams should be activated or not (see the stream selection event below).

Backwards compatibility

Not all demuxers will create the various GstStream and GstStreamCollection objects. In order to remain backwards compatible, a parent bin (parsebin in decodebin3) will create the GstStream and GstStreamCollection based on the pads being added/removed from an element.

This allows providing stream listing/selection for any demuxer-like element even if it doesn't implement the GstStreamCollection usage.

Stream selection event

• API: GST_EVENT_SELECT_STREAMS
• API: gst_event_new_select_streams(...)
• API: gst_event_parse_select_streams(...)

Stream selection events are generated by the application and sent into the pipeline to configure the streams.

The event carries:

• List of GstStreams to activate - a subset of the GstStreamCollection
• (Not implemented) - List of GstStreams to be kept discarded - a subset of streams for which hot-swapping will not be desired, allowing elements (such as decodebin3, demuxers, ...) to not parse or buffer those streams at all.

Usage from application

There are two use-cases where an application needs to specify in a generic fashion which streams it wants in output:

1. When there are several present streams of which it only wants a subset (such as one audio, one video and one subtitle stream). Those streams are demuxed and present in the pipeline.
2. When the stream the user wants require some element to undertake some action to expose that stream in the pipeline (such as DASH/HLS alternative streams).

From the point of view of the application, those two use-cases are treated identically. The streams are all available through the GstStreamCollection posted on the bus, and it will select a subset.

The application can select the streams it wants by creating a GST_EVENT_SELECT_STREAMS event with the list of stream-id of the streams it wants. That event is then sent on the pipeline, eventually traveling all the way upstream from each sink.

In some cases, selecting one stream may trigger the availability of other dependent streams, resulting in new GstStreamCollection messages. This can happen in the case where choosing a different DVB channel would create a new single-program collection.

Usage in elements

Elements that receive the GST_EVENT_SELECT_STREAMS event and that can activate/deactivate streams need to look at the list of stream-id contained in the event and decide if they need to do some action.

In the standard demuxer case (demuxing and exposing all streams), there is nothing to do by default.

In decodebin3, activating or deactivating streams is taken care of by linking only the streams present in the event to decoders and output ghostpad.

In the case of elements that can expose alternate streams that are not present in the pipeline as pads, they will take the appropriate action to add/remove those streams.

Containers that receive the event should pass it to any elements with no downstream peers, so that streams can be configured during pre-roll before a pipeline is completely linked down to sinks.

decodebin3 usage and example

This is an example of how decodebin3 works by using the above-mentioned objects/events/messages.

For clarity/completeness, we will consider a mpeg-ts stream that has multiple audio streams. Furthermore that stream might have changes at some point (switching video codec, or adding/removing audio streams).

Initial differences

decodebin3 is different, compared to decodebin2, in the sense that, by default:

• it will only expose as output ghost source pads one stream of each type (one audio, one video, ..).
• It will only decode the exposed streams

The multiqueue element is still used and takes in all elementary (non-decoded) streams. If parsers are needed/present they are placed before the multiqueue. This is needed in order for multiqueue to work only with packetized and properly timestamped streams.

Note that the whole typefinding of streams, and optional depayloading, demuxing and parsing are done in a new 'parsebin' element.

Just like the current implementation, demuxers will expose all streams present within a program as source pads. They will connect to parsers and multiqueue.

Initial setup. 1 video stream, 2 audio streams.

  +---------------------+
  | parsebin            |
  | ---------           | +-------------+
  | | demux |--[parser]-+-| multiqueue  |--[videodec]---[
]-+-|       |--[parser]-+-|             |
  | |       |--[parser]-+-|             |--[audiodec]---[
  | ---------           | +-------------+
  +---------------------+

GstStreamCollection

When parsing the initial PAT/PMT, the demuxer will:

1. create the various GstStream objects for each stream.
2. create the GstStreamCollection for that initial PMT
3. post the GST_MESSAGE_STREAM_COLLECTION Decodebin will intercept that message and know what the demuxer will be exposing.
4. The demuxer creates the various pads and sends the corresponding STREAM_START event (with the same stream-id as the corresponding GstStream objects), CAPS event, and TAGS event.

• parsebin will add all relevant parsers and expose those streams.

• Decodebin will be able to correlate, based on STREAM_START event stream-id, what pad corresponds to which stream. It links each stream from parsebin to multiqueue.

• Decodebin knows all the streams that will be available. Since by default it is configured to only expose a stream of each type, it will pick a stream of each for which it will complete the auto-plugging (finding a decoder and then exposing that stream as a source ghostpad.

Note: If the demuxer doesn't create/post the GstStreamCollection, parsebin will create it on itself, as explained in section 2.3 above.

Changing the active selection from the application

The user wants to change the audio track. The application received the GST_MESSAGE_STREAM_COLLECTION containing the list of available streams. For clarity, we will assume those stream-ids are "video-main", "audio-english" and "audio-french".

The user prefers to use the french soundtrack (which it knows based on the language tag contained in the GstStream objects).

The application will create and send a GST_EVENT_SELECT_STREAM event containing the list of streams: "video-main", "audio-french".

That event gets sent on the pipeline, the sinks send it upstream and eventually reach decodebin.

Decodebin compares:

• The currently active selection ("video-main", "audio-english")
• The available stream collection ("video-main", "audio-english", "audio-french")
• The list of streams in the event ("video-main", "audio-french")

Decodebin determines that no change is required for "video-main", but sees that it needs to deactivate "audio-english" and activate "audio-french".

It unlinks the multiqueue source pad connected to the audiodec. Then it queries audiodec, using the GST_QUERY_ACCEPT_CAPS, whether it can accept as-is the caps from the "audio-french" stream.

1. If it does, the multiqueue source pad corresponding to "audio-french" is linked to the decoder.
2. If it does not, the existing audio decoder is removed, a new decoder is selected (like during initial auto-plugging), and replaces the old audio decoder element.

The newly selected stream gets decoded and output through the same pad as the previous audio stream.

Note: The default behaviour would be to only expose one stream of each type. But nothing prevents decodebin from outputting more/less of each type if the GST_EVENT_SELECT_STREAM event specifies that. This allows covering more use-case than the simple playback one. Such examples could be :

• Wanting just a video stream or just an audio stream
• Wanting all decoded streams
• Wanting all audio streams ...

Changes coming from upstream

At some point in time, a PMT change happens. Let's assume a change in video-codec and/or PID.

The demuxer creates a new GstStream for the changed/new stream, creates a new GstStreamCollection for the updated PMT and posts it.

Decodebin sees the new GstStreamCollection message.

The demuxer (and parsebin) then adds and removes pads.

1. decodebin will match the new pads to GstStream in the "new" GstStreamCollection the same way it did for the initial pads in section 4.2 above.
2. decodebin will see whether the new stream can re-use a multiqueue slot used by a stream of the same type no longer present (it compares the old collection to the new collection). In this case, decodebin sees that the new video stream can re-use the same slot as the previous video stream.
3. If the new stream is going to be active by default (in this case it does because we are replacing the only video stream, which was active), it will check whether the caps are compatible with the existing videodec (in the same way it was done for the audio decoder switch in section 4.3).

Eventually, the stream that switched will be decoded and output through the same pad as the previous video stream in a gapless fashion.

Further examples

HLS alternates

There is a main (multi-bitrate or not) stream with audio and video interleaved in mpeg-ts. The manifest also indicates the presence of alternate language audio-only streams. HLS would expose one collection containing:

1. The main A+V CONTAINER stream (mpeg-ts), initially active, downloaded and exposed as a pad
2. The alternate A-only streams, initially inactive and not exposed as pads the tsdemux element connected to the first stream will also expose a collection containing 1.1) A video stream 1.2) An audio stream

    [ Collection 1 ]         [ Collection 2 ]
    [  (hlsdemux)  ]         [   (tsdemux)  ]
    [ upstream:nil ]    /----[ upstream:main]
    [              ]   /     [              ]
    [ "main" (A+V) ]<-/      [ "video"  (V) ]  viddec1 : "video"
    [ "fre"  (A)   ]         [ "eng"    (A) ]  auddec1 : "eng"
    [ "kor"  (A)   ]         [              ]

The user might want to use the korean audio track instead of the default english one. => SELECT_STREAMS ("video", "kor")

1. decodebin3 receives and sends the event further upstream
2. tsdemux sees that "video" is part of its current upstream, so adds the corresponding stream-id ("main") to the event and sends it upstream ("main", "video", "kor")
3. hlsdemux receives the event => It activates "kor" in addition to "main"
4. The event travels back to decodebin3 which will remember the requested selection. If "kor" is already present it will switch the "eng" stream from the audio decoder to the "kor" stream. If it appears a bit later, it will wait until that "kor" stream is available before switching

multi-program MPEG-TS

Assuming the case of a mpeg-ts stream which contains multiple programs. There would be three "levels" of collection:

1. The collection of programs presents in the stream
2. The collection of elementary streams presents in a stream
3. The collection of streams decodebin can expose

Initially tsdemux exposes the first program present (default)

    [ Collection 1 ]         [ Collection 2     ]        [ Collection 3    ]
    [  (tsdemux)   ]         [   (tsdemux)      ]        [ (decodebin)     ]
    [ id:Programs  ]<-\      [ id:BBC1          ]<-\     [ id:BBC1-decoded ]
    [ upstream:nil ]   \-----[ upstream:Programs]   \----[ upstream:BBC1   ]
    [              ]         [                  ]        [                 ]
    [ "BBC1" (C)   ]         [ id:"bbcvideo"(V) ]        [ id:"bbcvideo"(V)]
    [ "ITV"  (C)   ]         [ id:"bbcaudio"(A) ]        [ id:"bbcaudio"(A)]
    [ "NBC"  (C)   ]         [                  ]        [                 ]

At some point the user wants to switch to ITV (of which we do not know the topology at this point in time. A SELECT_STREAMS event is sent with "ITV" in it and the pointer to the Collection1.

1. The event travels up the pipeline until tsdemux receives it and begins the switch.
2. tsdemux publishes a new 'Collection 2a/ITV' and marks 'Collection 2/BBC' as replaced. 2a) App may send a SELECT_STREAMS event configuring which demuxer output streams should be selected (parsed)
3. tsdemux adds/removes pads as needed (flushing pads as it removes them?)
4. Decodebin feeds new pad streams through existing parsers/decoders as needed. As data from the new collection arrives out each decoder, decodebin sends new GstStreamCollection messages to the app so it can know that the new streams are now switchable at that level. 4a) As new GstStreamCollections are published, the app may override the default decodebin stream selection to expose more/fewer streams. The default is to decode and output 1 stream of each type.

Final state:

    [ Collection 1 ]         [ Collection 4     ]        [ Collection 5    ]
    [  (tsdemux)   ]         [   (tsdemux)      ]        [ (decodebin)     ]
    [ id:Programs  ]<-\      [ id:ITV           ]<-\     [ id:ITV-decoded  ]
    [ upstream:nil ]   \-----[ upstream:Programs]   \----[ upstream:ITV    ]
    [              ]         [                  ]        [                 ]
    [ "BBC1" (C)   ]         [ id:"itvvideo"(V) ]        [ id:"itvvideo"(V)]
    [ "ITV"  (C)   ]         [ id:"itvaudio"(A) ]        [ id:"itvaudio"(A)]
    [ "NBC"  (C)   ]         [                  ]        [                 ]

TODO

• Add missing implementation

  • Add flags to GstStreamCollection

  • Add mutual-exclusion and relationship API to GstStreamCollection

• Add helper API to figure out whether a collection is a replacement of another or a completely new one. This will require a more generic system to know whether a certain stream-id is a replacement of another or not.

OPEN QUESTIONS

• Is a FLUSHING flag for stream-selection required or not ? This would make the handler of the SELECT_STREAMS event send FLUSH START/STOP before switching to the other streams. This is tricky when dealing where situations where we keep some streams and only switch some others. Do we flush all streams ? Do we only flush the new streams, potentially resulting in delay to fully switch ? Furthermore, due to efficient buffering in decodebin3, the switching time has been minimized extensively, to the point where flushing might not bring a noticeable improvement.

• Store the stream collection in bins/pipelines ? A Bin/Pipeline could store all active collection internally, so that it could be queried later on. This could be useful to then get, on any pipeline, at any point in time, the full list of collections available without having to listen to all COLLECTION messages on the bus. This would require fixing the "is a collection a replacement or not" issue first.

• When switching to new collections, should decodebin3 make any effort to map corresponding streams from the old to new PMT - that is, try and stick to the english language audio track, for example? Alternatively, rely on the app to do such smarts with stream-select messages ?