Commit graph

18354 commits

Author SHA1 Message Date
Antonio Ospite
fb46c6bf08 test: rtpbin_buffer_list: add a test for wrapping sequence numbers 2019-08-07 15:32:30 -04:00
Antonio Ospite
d9d0461aeb test: rtpbin_buffer_list: add a test for permissible gap in sequence numbers 2019-08-07 15:32:30 -04:00
Antonio Ospite
92be4121e8 test: rtpbin_buffer_list: add a test for the case of failed probation
When a new source fails to pass the probation period (i.e. new packets
have non-consecutive sequence numbers), then no buffer shall be pushed
downstream. Add a test to validate this case.
2019-08-07 15:32:30 -04:00
Antonio Ospite
0537925c3a test: rtpbin_buffer_list: add function to check sequence number 2019-08-07 15:32:30 -04:00
Antonio Ospite
ec56e2fb78 test: rtpbin_buffer_list: add test to verify that receiving stats are correct
Add a test to verify that stats about received packets are correct when
using buffer lists in the rtpsession receive path.

Split get_session_source_stats() in two to be able to get stats from
a GstRtpSession object directly.
2019-08-07 15:32:30 -04:00
Antonio Ospite
80daea90f0 test: rtpbin_buffer_list: add a test for buffer lists on the recv path 2019-08-07 15:32:30 -04:00
Antonio Ospite
8dd03042cc rtpsession: add support for buffer lists on the recv path
The send path in rtpsession processes the buffer list along the way,
sharing info and stats between packets in the same list, because it
assumes that all packets in a buffer list are from the same frame.

However, in the receiving path packets can arrive in all sorts of
arrangements:

  - different sources,
  - different frames (different timestamps),
  - different types (multiplexed RTP and RTCP, invalid RTP packets).

so a more general approach should be used to correctly support buffer
lists in the receive path.

It turns out that it's simpler and more robust to process buffers
individually inside the rtpsession element even if they come in a buffer
list, and then reassemble a new buffer list when pushing the buffers
downstream.

This avoids complicating the existing code to make all functions
buffer-list-aware with the risk of introducing regressions,

To support buffer lists in the receive path and reduce the "push
overhead" in the pipeline, a new private field named processed_list is
added to GstRtpSessionPrivate, it is set in the chain_list handler and
used in the process_rtp callback; this is to achieve the following:

  - iterate over the incoming buffer list;
  - process the packets one by one;
  - add the valid ones to a new buffer list;
  - push the new buffer list downstream.

The processed_list field is reset before pushing a buffer list to be on
the safe side in case a single buffer was to be pushed by upstream
at some later point.

NOTE:

The proposed modifications do not change the behavior of the send path.

The process_rtp callback is called in rtpsource.c by the push_rtp
callback (via source_push_rtp) only when the source is not internal.

So even though push_rtp is also called in the send path, it won't end up
using process_rtp in this case because the source would be internal in
the send path.

The reasoning from above may suggest a future refactoring: push_rtp
might be split to better differentiate the send and receive path.
2019-08-07 15:32:30 -04:00
Doug Nazar
b0534c65d1 matroska: Handle interlaced field order 2019-08-07 14:12:32 +00:00
Amr Mahdi
5f01b9da05 wavparse: Fix ignoring of last chunk in push mode
In push mode (streaming), if the last audio payload chunk is less than the segment rate buffer size, it would be ignored since the plugin waits until it has at least segment rate bufer size of audio.

The fix is to introduce a flushing flag that indicates that no more audio will be available so that the plugin can recognize this condition and flush the data is has even if it is less
than the desired segment rate buffer size.
2019-08-07 12:09:46 +00:00
Robert Tiemann
3c4add469e souphttpsrc: Log any error returned by soup_session_send() 2019-08-07 07:32:09 +00:00
luke.lin
d6ae59c32d qtdemux: enlarge the maximal atom size
For 8K content, frame size is over 25MB, and cause the negotiation failure.
Enlarge the limitation of QTDEMUX_MAX_ATOM_SIZE to 32MB.
2019-08-07 02:46:20 +00:00
Mathieu Duponchelle
5c7423d73c rtspsrc: expose and implement is-live property
This is useful to support the ONVIF case: when is-live is set to
FALSE and onvif-rate-control is no, the client can control the
rate of delivery and arrange for the server to block and still
keep sending when unblocked, without requiring back and forth
PAUSE / PLAY requests. This enables, amongst other things, fast
frame stepping on the client side.

When is-live is FALSE, we don't use a manager at all. This case
was actually already pretty well handled by the current code. The
standard manager, rtpbin, is simply no longer needed in this case.

Applications can instantiate a downloadbuffer after rtspsrc if
needed.
2019-08-06 22:45:37 +00:00
Mathieu Duponchelle
75f53631e5 rtspsrc: reset_time when flush stopping 2019-08-06 22:45:37 +00:00
Mathieu Duponchelle
5f1a732bc7 rtspsrc: expose and implement onvif-mode property
Refactor the code for parsing and generating the Range, taking
advantage of existing API in GstRtspTimeRange.

Only use the TCP protocol in that mode, as per the specification.

Generate an accurate segment when in that mode, and signal to the
depayloader that it should not generate its own segment, through
the "onvif-mode" field in the caps, see
<https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/merge_requests/328>
for more information.

Translate trickmode seek flags to their ONVIF representation

Expose an onvif-rate-control property
2019-08-06 22:45:37 +00:00
Mathieu Duponchelle
544f8fecf4 rtspsrc: improve handling of rate in seeks 2019-08-06 22:45:37 +00:00
Mathieu Duponchelle
e18d5d6ec6 rtpfunnel: forward correct segment when switching pad
Forwarding a single segment event from the pad that first gets
chained is incorrect: when that first event was sent by an element
such as x264enc, with its offset start, we end pushing out of segment
buffers for the other pad(s).

Instead, everytime the active pad changes, forward the appropriate
segment event.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1028
2019-08-06 14:02:50 +00:00
Sebastian Dröge
86ec5c1031 rtspsrc: Use new GstRTSPMessage API to set message body from a buffer directly 2019-08-05 19:35:36 +03:00
Antonio Ospite
ae48646d8e rtpsource: fix receiver source stats to consider previously queued packets
When it is not clear yet if a packet relative to a source should be
pushed, the packet is put into a queue, this happens in two cases:

  - the source is still in probation;
  - there is a large jump in seqnum, and it is not clear what
    the cause is, future packets will help making a guess.

In either case stats about received packets are not updated at all; and
even if they were, when init_seq() is called it resets all receiver
stats, effectively loosing any possible stat about previously received
packets.

Fix this by taking into account the queued packets and update the stats
when calling init_seq().
2019-08-02 17:22:51 +02:00
Antonio Ospite
cf0ffd8693 rtpsource: clarify meaning of the octets-sent and octets-received stats
The octets-send and octets-received stats count the payload bytes
excluding RTP and lower level headers, clarify that in the
documentation.
2019-08-02 17:22:51 +02:00
Antonio Ospite
821994240e rtpsource: expose field bytes_received in RTPSourceStats
Since commit c971d1a9a (rtpsource: refactor bitrate estimation,
2010-03-02) bytes_received filed in RTPSourceStats is set but then never
used again, expose it so that it can be used  by user code to verify how
many bytes have been received.
2019-08-02 17:22:51 +02:00
Antonio Ospite
9d800cad43 rtpmanager: consider UDP and IP headers in bandwidth calculation
According to RFC3550 lower-level headers should be considered for
bandwidth calculation.

See https://tools.ietf.org/html/rfc3550#section-6.2 paragraph 4:

  Bandwidth calculations for control and data traffic include
  lower-layer transport and network protocols (e.g., UDP and IP) since
  that is what the resource reservation system would need to know.

Fix the source data to accommodate that.

Assume UDPv4 over IP for now, this is a simplification but it's good
enough for now.

While at it define a constant and use that instead of a magic number.

NOTE: this change basically reverts the logic of commit 529f443a6
(rtpsource: use payload size to estimate bitrate, 2010-03-02)
2019-08-02 17:22:51 +02:00
Seungha Yang
4146dc905d qtdemux: Use empty-array safe way to cleanup GPtrArray
Fix assertion fail
GLib-CRITICAL **: g_ptr_array_remove_range: assertion 'index_ < rarray->len' failed
2019-08-02 12:32:59 +09:00
Marc Leeman
d365c4fdf9 rtpmp4vpay: config-interval -1 send at idr
adjust/port from rtph264pay and allow sending the configuration data at
every IDR

The payloader was stripping the configuration data when the
config-interval was set to 0. The code was written in such a way !(a >
0) that it stripped the config when it was set at -1 (send config_data
as soon as possible).

This resulted in some MPEG4 streams where no GOP/VOP-I was detected to
be sent out without configuration.
2019-08-01 14:28:04 +00:00
Doug Nazar
5451e4e900 matroskademux: Ignore crc32 element while peeking at cluster. 2019-07-27 14:21:34 -04:00
Guillaume Desmottes
5c4292b019 gtkglsink: fix crash when widget is resized after element destruction
Prevent _size_changed_cb() to be called after gtkglsink has been finalized.

Fix #632
2019-07-26 08:25:45 +00:00
Mathieu Duponchelle
4830bbe6ca qtdemux: fix reverse playback EOS conditions
In reverse playback, we don't want to rely on the position of the current
keyframe to decide a stream is EOS: the last GOP we push will start with
a keyframe, which position is likely to be outside of the segment.

Instead, let the normal seek_to_previous_keyframe mechanism do its job,
it works just fine.
2019-07-26 02:42:11 +00:00
Mathieu Duponchelle
104f459258 qtdemux: fix key unit seek corner case
If a key unit seek is performed with a time position that matches
the offset of a keyframe, but not its actual PTS, we need to
adjust the segment nevertheless.

For example consider the following case:

* stream starts with a keyframe at 0 nanosecond, lasting 40 milliseconds
* user does a key unit seek at 20 milliseconds
* we don't adjust the segment as the time position is "over" a keyframe
* we push a segment that starts at 20 milliseconds
* we push a buffer with PTS == 0
* an element downstream (eg rtponviftimestamp) tries to calculate the
  stream time of the buffer, fails to do so and drops it
2019-07-26 01:50:47 +00:00
Sebastian Dröge
4911ac38ac jpegdec: Don't dereference NULL input state if we have no caps in TIME segments
Simply assume that the JPEG frame is not going to be interlaced instead
of crashing.
2019-07-25 15:08:54 +03:00
Knut Andre Tidemann
dbd7234191 rtp: opuspay: fix memory leak in gst_rtp_opus_pay_setcaps.
The src caps were never dereferenced, causing a memory leak.
2019-07-22 10:33:41 +02:00
Mathieu Duponchelle
5fde140e6e qtdemux: implement support for trickmode interval
When the seek event contains a (newly-added) trickmode interval,
and TRICKMODE_KEY_UNITS was requested, only let through keyframes
separated with the required interval
2019-07-18 17:54:43 +02:00
Nirbheek Chauhan
9336326b3d meson: Don't generate doc cache when no plugins are enabled
Fixes gst-build with -Dauto-features=disabled
2019-07-17 19:14:13 +05:30
Seungha Yang
aa0544ab8f matroska: Port to color_{primaries,transfer,matrix}_to_iso
... and remove duplicated code.
2019-07-15 23:25:53 +09:00
Jan Schmidt
436d33b288 splitmuxsink: add the ability to mux auxilliary video streams
The primary video stream is used to select fragment cut points
at keyframe boundaries. Auxilliary video streams may be
broken up at any packet - so fragments may not start with a keyframe
for those streams.
2019-07-15 11:46:36 +00:00
Jan Schmidt
b5d8484b0b splitmuxsrc: Add video_%d pad template.
splitmuxsrc actually supports multiple video pads. Make that clear,
especially since it was already creating pads named "video_0" etc.
2019-07-15 11:46:36 +00:00
Mathieu Duponchelle
9deb3c27ac qtdemux: fix conditions for end of segment in reverse playback
The time_position field of the stream is offset by the media_start
of its QtDemuxSegment compared to the start of the GstSegment of
the demuxer, take it into account when making comparisons.
2019-07-09 21:21:20 +00:00
Seungha Yang
67b8ce3167 matroskademux: Fix mismatched transfer characteristic
TransferCharacteristics(18) should be ARIB STD-B67 (HLG)
See https://www.webmproject.org/docs/container/#TransferCharacteristics

Also map more color primaries indexes which have been handled by matroska-mux.
2019-07-09 23:11:45 +09:00
Seungha Yang
dbb4849a32 v4l2: Remove misleading comments
gst_pad_template_new() does not take ownership of the caps
2019-07-09 19:51:20 +09:00
Olivier Crête
efed059b9a rtp session: Add test for collision loopback detection
Ignore further collisions if the remote SSRC change with ours, it's
probably because someone is sending us back the packets we send out.
2019-07-06 14:23:20 +00:00
Olivier Crête
b5faed910e rtpsession tests: Add test for third-party collision detection
Add tests to validate the code that ignores the same packets coming
from 2 different sources (an third-party collision).
2019-07-06 14:23:20 +00:00
Olivier Crête
3574e6c176 rtpsession: Add test for collision on incoming packets
Make sure that the collision is properly detected on incoming packets.
2019-07-06 14:23:20 +00:00
Olivier Crête
4e18567863 rtpsession test: Verify that on-ssrc-collision message is emitted 2019-07-06 14:23:20 +00:00
Olivier Crête
9d9d543d5c rtpsession: Also send conflict event when sending packet
If the conflict is detected when sending a packet, then also send an
upstream event to tell the source to reconfigure itself.

Also ignore the collision if we see more than one collision from the same
remote source to avoid problems on loops.
2019-07-06 14:23:20 +00:00
Song Bing
c74a5d870d v4l2transform: set right buffer count.
Set right buffer count to avoid one buffer.
2019-07-04 17:37:30 +00:00
Olivier Crête
061afa33ee rtph265pay: Also immediately send packet if it is a suffix NAL
Immediately send packet if it contains any suffix NAL, this is required
in case they come after the VCL nal to not have to wait until the next frame.
2019-07-03 19:05:29 +00:00
Olivier Crête
43e83695fd rtph265pay: Don't drop second byte of NAL header
At least keep 2 bytes per NAL even if the second one is 0, the
second byte of the NAL header could very well be 0.
2019-07-03 19:05:29 +00:00
Olivier Crête
6fed30c48e rtph26xpay: Avoid print when there is no bundle at end of packet 2019-07-03 19:05:29 +00:00
Olivier Crête
97f2fb4cc8 rtph26xpay: Wait until there is a VCL or suffix NAL to send
With unit tests.
2019-07-03 19:05:29 +00:00
Olivier Crête
4810c93222 rtph265pay test: Add unit tests for aggregation 2019-07-03 19:05:29 +00:00
Olivier Crête
1b32cb1eae rtph265pay: Implement Aggregation packets
Align with rtph264pay
2019-07-03 19:05:29 +00:00
Olivier Crête
42d775dfbe rtph264pay test: Add unit tests for aggregation 2019-07-03 19:05:29 +00:00