Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
Cleanup the previous pipeline a little earlier for the
case that a source element provides raw data.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_chain):
reset v1 tag offset when there is no v1 tag. Fixes id3demux always
consuming the last 128 bytes, even though it was valid mp3 data.
Original commit message from CVS:
2004-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_palette_to_caps),
(gst_v4lsrc_getcaps), (gst_v4lsrc_get):
* sys/v4l/v4l-overlay_calls.c: (gst_v4l_set_overlay):
Change g_warnings to GST_WARNING_OBJECT and fix colourspace issue
Original commit message from CVS:
2004-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_src_link), (gst_v4lsrc_getcaps):
Fix for webcams that support only specific width or height
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavenc/gstwavenc.c: (gst_wavenc_stop_file):
Fix wrong discont event setup (fixes#154967).
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/auparse/gstauparse.c: (gst_auparse_chain):
Error out on invalid data (fixes#154807).
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/dvdread/dvdreadsrc.c: (_read):
Make titles > 0 work again (fixes#154834).
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_massage_index):
OK, so the original code was too strict. It makes random AVI files
hang for seconds upon opening, which is unacceptable and is far
beyond the original goal of getting multiple chunks for one-chunk
sounc stream files. So now do just that.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source),
(gst_play_base_bin_change_state):
Actually clean up streaminfo if output fails. This would trigger
if, for example, there was no CD in the drive. No preroll, so
a streaminfo structure is created, but the subsequent state change
of the thread fails.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Don't change state if parent failed.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init),
(gst_play_bin_init), (gst_play_bin_get_property), (handoff),
(gen_video_element), (remove_sinks):
Add small bits of code for screenshot handling.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_set_property),
(gen_video_element), (gen_audio_element), (setup_sinks):
Don't assume the user provided sinks are named "sink"...
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gen_preroll_element),
(unknown_type), (setup_source), (gst_play_base_bin_remove_element),
(gst_play_base_bin_link_stream):
Do not try to autoplug sources that generate raw streams like
cdparanoia.
disconnect the preroll overrun signal when we don't need it anymore.
Original commit message from CVS:
2004-10-08 Julien MOUTTE <julien@moutte.net>
* sys/ximage/ximagesink.c: (gst_ximagesink_sink_link),
(gst_ximagesink_set_xwindow_id), (gst_ximagesink_init):
* sys/ximage/ximagesink.h:
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_sink_link),
(gst_xvimagesink_set_xwindow_id), (gst_xvimagesink_init):
* sys/xvimage/xvimagesink.h: Reverting Ronald's changes as the issue is
not coming from those elements. Moreover these elements should not keep
the xid they have been given when in NULL state.
Original commit message from CVS:
* sys/ximage/ximagesink.c: (gst_ximagesink_sink_link),
(gst_ximagesink_set_xwindow_id), (gst_ximagesink_init):
* sys/ximage/ximagesink.h:
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_sink_link),
(gst_xvimagesink_set_xwindow_id), (gst_xvimagesink_init):
* sys/xvimage/xvimagesink.h:
Actually only create a new toplevel window if we're not gonna
embed it right after.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (play_base_bin_mute_pad),
(gst_play_base_bin_mute_stream), (gst_play_base_bin_link_stream):
* gst/playback/gstplaybin.c: (setup_sinks):
Implement muting/unmuting of streams, mute streams that are not
used.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(find_compatibles), (close_pad_link), (try_to_link_1), (new_pad),
(no_more_pads), (close_link), (type_found):
* gst/playback/gstplaybasebin.c: (new_decoded_pad):
* gst/playback/gstplaybin.c: (gen_video_element):
Do not signal the no_more_pads after the first pad when
we are plugging a non dynamic element with multiple
output pads (like swfdec, dvdec, ...).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* gst/wavparse/Makefile.am
* gst/wavparse/riff.h
* gst/wavparse/wavparse.vcproj
riff.h removal (unused and duplication with riff-ids.h)
Original commit message from CVS:
* gst/flx/gstflxdec.c: (gst_flxdec_init), (gst_flxdec_loop):
Actually _do_ negotiation. Pass gdouble as arg instead
of guint64 for the framerate.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_init),
(find_compatibles), (close_pad_link), (try_to_link_1),
(no_more_pads), (close_link), (type_found):
* gst/playback/gstplaybasebin.c: (new_decoded_pad):
* gst/playback/gstplaybin.c: (gen_video_element),
(gen_audio_element):
Set state on newly added element to READY so that negotiation
can happen ASAP.
Addes some more debug info.
Do not try to plug pads with multiple caps structures or ANY
because it is too dangerous since we do not do dynamic
replugging.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_handle_src_event):
Fix seeking in some files. All this code is no longer needed (and
actually breaks stuff) because we now synchronize the full index
right when reading the header.
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_handle_sink_event),
(gst_rmdemux_loop), (gst_rmdemux_add_stream),
(gst_rmdemux_parse_mdpr), (gst_rmdemux_dump_mdpr):
Don't hang on length=0 chunks. Some negotiation fixes. Signal
no-more-pads.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_stream_index),
(gst_avi_demux_stream_scan), (sort), (gst_avi_demux_massage_index),
(gst_avi_demux_stream_header), (gst_avi_demux_stream_data):
Improve allocation, cutting and sorting of the index. How takes a
few seconds instead of minutes.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_template_caps):
Add wing commander format mimetype/fourccs.
* gst/avi/gstavidemux.c: (gst_avi_demux_massage_index):
Don't crash if some value is 0.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_template_caps):
Add DIB fourcc (raw, palettized 8-bit RGB).
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data):
Oops, fix strf_data reading bug.
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Use a non-NULL tag.
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak):
Time for hacks. Sorry Dave. At least one quicktime movie (a
trailer) that I've encountered contains multiple video tracks.
One of those is the actual video track, the other are one-frame
tracks (images). Unfortunately, the number of frames according
to the trak header is 1 for each, so that doesn't help. So
instead, I look at the duration and discard tracks with a
duration shorter than 20% of the length of the stream. Better
than nothing.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_stream_init), (gst_wavparse_fmt),
(gst_wavparse_other), (gst_wavparse_loop),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
* gst/wavparse/gstwavparse.h:
Added some more debugging info.
Fix the case where the length of the file is 0.
Make sure we seek to sample borders.
Original commit message from CVS:
* gst/playback/README:
* gst/playback/gstdecodebin.c: (gst_decode_bin_factory_filter),
(gst_decode_bin_init), (find_compatibles), (close_pad_link),
(try_to_link_1), (no_more_pads), (close_link), (type_found):
Add some debug info to decodebin, update README
