Commit graph

7870 commits

Author SHA1 Message Date
Edward Hervey
fa0e3184dd flvdemux: Audio tags without any content are valid.
We silently ignore them instead of erroring out.
2010-02-13 18:18:42 +01:00
Edward Hervey
817911664e flvdemux: Fix GST_CLOCK_DIFF usage.
It was previously checking for DIFF(a, b > 6 * GST_SECOND) instead of
the proper DIFF(a,b) > 6 * GST_SECOND
2010-02-13 18:07:50 +01:00
Edward Hervey
d263119589 flvdemux: Don't forget to reset the indexed variable when cleaning up 2010-02-13 16:27:07 +01:00
Edward Hervey
0dd06da5e8 flvdemux: Speedup GstIndex usage
Used the _add_associationv variant of GstIndex since we know how many
associations we're adding. Trims up to 50% from index generation time.

Note : It would be great if the index could be generated on the fly or
on request as opposed to being fully created at startup.
2010-02-13 14:57:59 +01:00
Wim Taymans
7f08081016 jitterbuffer: don't resync to invalid timestamps
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
2010-02-12 19:32:27 +01:00
Wim Taymans
d344754f03 rtpbin: fix typo 2010-02-12 17:22:56 +01:00
Wim Taymans
772eca5aff jitterbuffer: start out active and not buffering
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
2010-02-12 17:22:56 +01:00
Wim Taymans
8bbfd94c25 rtpbin: more buffering work
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
2010-02-12 17:22:56 +01:00
Wim Taymans
e6e287cdcc rtpjitterbuffer: adjust latency in buffer mode
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
2010-02-12 17:22:55 +01:00
Wim Taymans
ab73603031 jitterbuffer: add ts-offset to timestamp
Add the ts-offset to the buffer timestamp to get the final output timestamp of
the buffer.
2010-02-12 17:22:55 +01:00
Wim Taymans
74a3be350d rtpbin: do more accurate buffer offsets
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
2010-02-12 17:22:55 +01:00
Wim Taymans
3efcc0fbc1 rtpbin: only start buffering when < 100%
Only start buffering when the percentage message is < 100 %.
2010-02-12 17:22:55 +01:00
Wim Taymans
0348ebe651 rtpbin: keep track of elapsed pause time
Keep track of the time we spend pausing the jitterbuffers when they were
buffering and distribute this elapsed time to the jitterbuffers.
Also keep the latency in nanosecond precision.
2010-02-12 17:22:54 +01:00
Wim Taymans
ecf6ed8fc1 jitterbuffer: keep track of offset
Keep track of an outgoing offset that we add to each outgoing buffer to
compensate for PAUSE when buffering.
Adjust the offset when activating.
2010-02-12 17:22:54 +01:00
Wim Taymans
048e5b6fbe jitterbuffer: report level using high watermark 2010-02-12 17:22:54 +01:00
Wim Taymans
8d814f3782 rtpbin: pass running_time to jitterbuffer pause
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
2010-02-12 17:22:54 +01:00
Wim Taymans
bf697b12e3 rtpbin: add some comments 2010-02-12 17:22:53 +01:00
Wim Taymans
20a27a545a rtpbin: more buffering updates
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
2010-02-12 17:22:53 +01:00
Wim Taymans
a5b9d3f917 rtpbin: propagate buffer-mode property
Propagate buffer-mode property to the jitterbuffers.
Intercept BUFFERING messages in rtpbin
2010-02-12 17:22:53 +01:00
Wim Taymans
d3db9574a9 jitterbuffer: do more buffering implementation
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
2010-02-12 17:22:52 +01:00
Wim Taymans
aeacbfed3e jitterbuffer: flesh out buffering mode some more
Add a buffering state to the jitterbuffer and wait until buffering ends before
pushing out packets.
2010-02-12 17:22:52 +01:00
Wim Taymans
56b29c9a6b jitterbuffer: hook up the mode property
Expose a mode property on the jitterbuffer.
Fix the case where timestamps are -1 in the check for outgoing timestamps.
2010-02-12 17:22:52 +01:00
Wim Taymans
be4517a6b8 jitterbuffer: add buffering mode options
Add getters and setters for different buffering modes that the jitterbuffer will
support. Default to the current slave mode.
2010-02-12 17:22:52 +01:00
Tim-Philipp Müller
114ba3dc6e v4lsink: lower rank to MARGINAL 2010-02-12 15:56:01 +00:00
Robert Swain
bf9d8dbbdc flvdemux: Obtain the index from the end of an flv file in push mode
Allows for better support of seeking in flv files when in push mode
2010-02-12 16:25:44 +01:00
Robert Swain
dd23397b4f avidemux: Drop video frames up to the desired keyframe after a seek
The audio packets in AVI are generally muxed ~0.5s before the
corresponding video packet. This changes causes downstream to only
receive packets with roughly corresponding timestamps.
2010-02-12 15:56:18 +01:00
Wim Taymans
1175d0698c avidemux: more DISCONT handling
Add some debug in the DISCONT handling code.
When we receive a DISCONT in push mode, mark all streams as DISCONT.
2010-02-12 15:56:18 +01:00
Robert Swain
0011c9b0da avidemux: Fix _handle_seek_push () and new segement behaviour 2010-02-12 15:56:18 +01:00
Wim Taymans
2ce79998a1 avidemux: cleanups
Make sure we reset the demuxer correctly wrt parsing the index.
Don't leak pending seek events.
Rename some methods to reflect what they do and to avoid confusion with similar
method names.
Try to make the seeking threadsafe by protecting the setup code with a lock.
Make sure we post errors when a seek fails.
2010-02-12 15:56:18 +01:00
Wim Taymans
e6cc145352 avidemux: rename some variables
seek_event -> seg_event
event_seek -> seek_event
2010-02-12 15:56:18 +01:00
Wim Taymans
784d888cb2 avidemux: take fallback duration from avih
When we have not parsed any indexes yet, we don't know the length of the streams
and we must take the length given in the avih as a fallback.
Avoid some typechecking.
2010-02-12 15:56:18 +01:00
Robert Swain
3e1ed0c727 avidemux: Push mode seeking support 2010-02-12 15:56:18 +01:00
Wim Taymans
c2dfc94b1d rtspsrc: cleanup properties
Use more default constants.
Use static strings param flag.
Init properties explicitly instead of letting gobject do this.
2010-02-12 15:20:07 +01:00
Stefan Kost
f70dbd0eb7 speex: add missing include 2010-02-12 15:35:30 +02:00
Stefan Kost
f003fef3ad taginject: fix multi-value tag example
We need to use {} to specify a list.
2010-02-12 15:35:30 +02:00
Stefan Kost
ef343d8ad9 avi,wav: also handle JUNQ chunk in addition to JUNK 2010-02-12 15:35:30 +02:00
Wim Taymans
ad6d4540a7 rtppay: don't ignore result from set_outcaps
set_outcaps can fail and we need to propagate the result upstream.
2010-02-12 13:53:58 +01:00
Wim Taymans
1f9c39da2a flvparse: fix confusing debug messages 2010-02-12 13:53:58 +01:00
Wim Taymans
99a581215f jitterbuffer: add some more debug info 2010-02-12 13:53:57 +01:00
Wim Taymans
55b5e2e3f3 pulsesink: avoid segfault when shutting down
when we are shutting down, we might still receive state updates from pulseaudio
but since we are unparented we should not do anything with the NULL parent
anymore.
2010-02-12 13:53:57 +01:00
Wim Taymans
caec8d9837 videomixer: fix timestamp problems
When the pad with the highest framerate goes EOS, instead of not timestamping
output buffers, intepollate timestamps and durations from the last seen ones.

Fixes #608026
2010-02-12 13:53:57 +01:00
Sebastian Dröge
92ddc932eb docs: Update documentation 2010-02-12 11:32:40 +01:00
Sebastian Dröge
bc611043a9 Moved 'shapewipe' from -bad to -good
Fixes bug #584536.
2010-02-12 11:24:38 +01:00
Sebastian Dröge
919e93f1b2 [MOVED FROM BAD 29/29] shapewipe: Preserve the input color values in all cases 2010-02-12 11:12:35 +01:00
Sebastian Dröge
e9f9f4cfd4 [MOVED FROM BAD 28/29] shapewipe: Scale mask alpha values by the source alpha values 2010-02-12 11:12:35 +01:00
Sebastian Dröge
8786380c9a [MOVED FROM BAD 27/29] shapewipe: Fix ARGB processing 2010-02-12 11:12:35 +01:00
Sebastian Dröge
a59bc8a240 [MOVED FROM BAD 26/29] shapewipe: Print some more details on error/warning messages 2010-02-12 11:12:35 +01:00
Sebastian Dröge
6e086c8e2f [MOVED FROM BAD 25/29] shapewipe: Improve/add debug output 2010-02-12 11:12:34 +01:00
Sebastian Dröge
4d038dc516 [MOVED FROM BAD 24/29] shapewipe: Always hold the mask mutex before signalling the GCond 2010-02-12 11:12:34 +01:00
Sebastian Dröge
e2ab650079 [MOVED FROM BAD 23/29] shapewipe: Move chain function error cases at the end of the function and add useful debug output 2010-02-12 11:12:34 +01:00