Postpone the cleanup of any consecutive sequence of lost frames
which starts at frame 0, until frame 100 is dequeued from driver.
This allows fluster tests JVT/CVWP2_TOSHIBA_E, JVC/CVWP3_TOSHIBA_E
and HEVC/POC_A_Bossen_3 that sends out-of-order frames to successfully
complete (e.g., test of Amphion vpu driver).
Fixes#1569
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3398>
In the trick mode, driver may queue a valid buffer follow by an
empty buffer which has no valid data to indicate EOS.For the empty
buffer whose memory is multi-plane, need to resize it before
unreference it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2731>
If the driver does not support VIDIOC_CREATE_BUFS ioctl, the pool
configuration may get changed, which requires a validation. This would
fail to activate a pool in a case it shouldn't normally fail unless we
are out of memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2456>
macOS features hidden devices. These are devices that will
not be shown in the macOS UIs and that cannot be retrieved
without having the specific UID of the hidden device. There
are cases when you might want to have a hidden device, for example
when having a virtual speaker that forwards the data to a virtual
hidden input device from which you can then grab the audio.
The blackhole project supports these hidden devices and
this patch provides a way that if the device id is a hidden
device it will use it instead of check the hardware list of devices
to understand if the device is valid.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2251>
get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.
Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.
So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
Hantro H1 and Rockchip VEPU2 drivers will pad the width/height to a
multiple of 16. In order to obtain the right JPEG size, the image needs
to be cropped using the S_SELECTION API. This support is added as best
effort since older drivers may emulate this by looking at the capture
queue width/height.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2329>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
Add properties to control input cropping in the V4L2 device.
The input cropping is applied before composing the result to the
capture buffer. By default the capture size will be set to the same
size as the crop region, but it can be scaled to a different output
frame size if supported by the V4L2 device.
If scaling is not supported, the cropped image will
be composed as is into the top-left corner of the capture buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
Get the current crop bounding region from the V4L2 device so
that it can be provided to applications and used to validate
crop settings. Also make the default crop region available so
that it can be used to reset the crop when appropriate.
Uses the selection API when available with fallback to the crop
API for older kernels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
The gst_v4l2_object_set_crop() is used for removing buffer
alignment padding. Give it a name that better reflects
that usage. This helps to distinguish from cropping of the
input image (e.g. cropping at the image sensor on a captre
device), which can be unrelated to the memory buffer padding,
especially if scaling is involved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
There is a chance that pool->buffers[index] sets BUFFER_STATE_QUEUED, but
it has not been queued yet which makes pool->buffers[index] still NULL.
At this time, if pool_streamff release all buffers with BUFFER_STATE_QUEUED
state regardless of whether the buffer is NULL or not, it will cause segfault.
To fix this, also check buffer when streamoff release buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1842>
When the size of V4L2 capture or output is changes with VIDIOC_S_FMT,
the device is only required to update the compisition window to fit
inside the new frame size. This can result in captured data only being
updated on a portion of the frame after a resize.
Update the composition window to the default value determined by the
V4L2 device driver whenever the format is changed to make sure that
all image data is composed to its full size.
Fixes#765
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1806>
The dynamic resolution changes when
the sequence starts when the decoder detects a coded frame with one or
more of the following parameters different from those previously
established (and reflected by corresponding queries):
1.coded resolution (OUTPUT width and height),
2.visible resolution (selection rectangles),
3.the minimum number of buffers needed for decoding,
4.bit-depth of the bitstream has been changed.
Although gstreamer parser has parsed the stream resolution.
but there are some case that we need to handle resolution change event.
1. bit-depth is different from the negotiated format.
2. the capture buffer count can meet the demand
3. there are some hardware limitations that the decoded resolution may
be larger than the display size. For example, the stream size is
1920x1080, but some vpu may decode it to 1920x1088.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
v4l2videodec do some refactoring so that it can support
dynamic resolution change event.
1.wrap the setup process of capture as a function,
as decoder need setup the capture again when
dynamic resolution change event is received.
2.move the function "remove_padding"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
osxaudiodeviceprovider now probes devices more than once to determine
if the device can function as both an input AND and output device.
Previously, if the device provider detected that a device had any output
capabilities, it was treated solely as an Audio/Sink. This causes issues
that have both input and output capabilities (for example, USB interfaces
for professional audio have both input and output channels). Such devices
are now listed as both an Audio/Sink as well as an Audio/Source.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1385>
As this element is single threaded, we only need to stop the objects to
allow changing the format again. Fixes assertion notably on shutdown and
on some other situation where the format may be set twice without
actually activating the element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1567>
If the video4linux device supports norms but has no norm set, norm is
returned as an uninitialized variable after the ioctl call, leading to
gst_v4l2_tuner_get_norm_by_std_id() returning a random norm from the
supported norms. Catch this case and instead return NULL to indicate
that no norm is setup.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1625>
Hotdoc should be able to extract and parse comments out of these. Just
need to be careful to only add the glob in directories that actually
contain *.m (objc) and *.mm (objcpp) files.
Also fix some doc comments and remove redundant ones.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1614>
This is listed as a public interface implemented by osxaudio, so we
need to mark it as a plugin API so that it's listed in the
documentation correctly.
This is an ancient symbol, so add it to the symbol index too.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1601>
