Check for pulsesink < 0.10.17 because it includes code that is now included in
baseaudiosink. Disable that code in baseaudiosink to be compatible with the
older version.
Take the time of the clock so that the last_time field is set. This is important
for sinks that restart their internal ringbuffer after a caps change and need to
know the last know position.
When going to NULL, we reset the ringbuffer so that it starts beck from 0. We
also make sure that the clock is updated with the elapsed time so that it
alsways increments even when the ringbuffer goes back to 0. When this happened
we need to adjust the sample position for the reset ringbuffer.
Fixes#594136
The old one did the mistake of not actually advancing the ringbuffer, it just
adjusted the segbase, introducing the whole lenght of the ringbuffer as an
extra delay in the pipeline.
Also make sure that the resync can never go back in time, producing the same
timestamps that has already been produced, as this can cause severe problems
for sinks and other synching mechanisms.
Fixes#594256
Add section docs for multichannel, so that it has a short desc in the toc too.
Move the section docs in adio up, so that the follow the copyright like
elsewhere.
Unparent and free the ringbuffer when going to NULL, like we do with the
audiosrc element. We can do this now because we correctly manage the time
jumping back to 0.
Hack around thread-safety issues in GObject and our racy _get_type()
functions (we could easily fix the _get_type() functions, but we still
need to hack around the GObject class races until we require a newer
GLib version, I think).
Use the unadjusted internal clock times to calculate the internal/external
offset when calibrating the clock.
When going to NULL, unparent and free the ringbuffer, like we do in the source
element.
See #578506
Add two methods for getting the unadjusted time of the clock and one for
adjusting an internal time. We will need these methods for correctly handling
the time after a gst_audio_clock_reset().
Add a debug category and some debug lines to the audio clock.
API: gst_audio_clock_get_time()
API: gst_audio_clock_adjust()
API: GST_AUDIO_CLOCK_CAST()
After we pause the stream and interrupt the writeout to the ringbuffer, also adjust
the amount of output samples we consumed. We can't do this reliably with the
current API when we are doing trick modes but we can do the right thing for
normal playback.
Original commit message from CVS:
Patch by: José Alburquerque <jaalburqu svn gnome org>
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_new):
* gst-libs/gst/audio/gstaudioclock.h:
Make gst_audio_clock_new use const gchar* to ease the wrapping of
C++ bindings. Fixes#566723.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_change_state):
Avoid holding the OBJECT_LOCK when calling ringbuffer functions that
take the ringbuffer lock because rinbuffer lock > OBJECT_LOCK. We can do
this because the async_play method is deprecated and usually not called
anymore.
Original commit message from CVS:
* gst-libs/gst/audio/Makefile.am:
* gst-libs/gst/audio/audio.c:
* gst-libs/gst/audio/multichannel.h:
* gst-libs/gst/audio/testchannels.c:
* win32/MANIFEST:
* win32/common/audio-enumtypes.c:
(gst_audio_channel_position_get_type),
(gst_ring_buffer_state_get_type),
(gst_ring_buffer_seg_state_get_type),
(gst_buffer_format_type_get_type), (gst_buffer_format_get_type):
* win32/common/audio-enumtypes.h:
* win32/common/multichannel-enumtypes.c:
* win32/common/multichannel-enumtypes.h:
* win32/vs6/grammar.dsp:
* win32/vs6/libgstaudio.dsp:
* win32/vs7/libgstaudio.vcproj:
* win32/vs8/libgstaudio.vcproj:
Switch glib-mkenum for gst-libs/gst/audio from multichannel- to
audio- in order to wrap all enums declarations of that library.
This modification should not matter since that header file is not a
public header (it will be included by public headers).
Modify win32 crap^Wfiles accordingly.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.h:
* gst-libs/gst/audio/gstbaseaudiosink.h:
Complete Sebastien's commit from the 13th by exporting the
_slave_method_get_type() methods.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_setcaps):
Pause the write thread before deactivating and releasing the ringbuffer
to avoid a deadlock when we do gapless playback with different sample
rates in playbin2. Fixes#564929.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
Make GstAudioSrcSlaveMethod get_type() function non-static
as it's public now.
* win32/common/libgstaudio.def:
* win32/common/libgstnetbuffer.def:
Add some missing functions to the list of exported symbols.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_slave_method_get_type),
(gst_base_audio_sink_class_init):
* gst-libs/gst/audio/gstbaseaudiosink.h:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_slave_method_get_type),
(gst_base_audio_src_class_init):
* gst-libs/gst/audio/gstbaseaudiosrc.h:
API: Add GST_TYPE_BASE_AUDIO_(SRC|SINK)_SLAVE_METHOD to the
public API. This is needed for the C++ bindings to be able
to use this base classes. Fixes bug #564200, #564206.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_offset), (gst_base_audio_src_create):
Avoid nasty int overflows after about 12 hours and 25 minutes when these
code paths are triggered.
A free beer to Håvard Graff for finding this!
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_drain), (gst_base_audio_sink_event),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
Really fix audiosink drain handling by keeping track of the running_time
of the last sample.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Time is already in running_time. Remove base_time handling. Fixes
audiosinks not draining and thus chopping some audio in the end.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
Add one log message to check for audio_drained. Sync one log message
with the condition. Send EOS after draining audio in pull mode.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_callback):
Use gst_base_sink_do_preroll() to wait for PLAYING and before waiting
for the latency to expire, fixes#559567.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_class_init), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_activate), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Implement a separate activate functions to start monitoring the segments
or, in pull mode, pulling in data.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_init), (gst_base_audio_sink_dispose),
(gst_base_audio_sink_query_pad), (gst_base_audio_sink_query),
(gst_base_audio_sink_setcaps), (gst_base_audio_sink_callback),
(gst_base_audio_sink_activate_pull),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Implement pad and element convert query function.
Activate the ringbuffer.
Use the segment last_stop value as the offset to pull.
Use new basesink _do_preroll() method to preroll in the pulling thread.
Take appropriate locking in the pulling thread.
* gst-libs/gst/audio/gstringbuffer.h:
Update some docs.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_convert),
(gst_ring_buffer_activate), (gst_ring_buffer_is_active):
* gst-libs/gst/audio/gstringbuffer.h:
Add methods to more accuratly control the pulling thread of a
ringbuffer.
Add format conversion helper code to the ringbuffer.
API: GstRingBuffer:gst_ring_buffer_activate()
API: GstRingBuffer:gst_ring_buffer_is_active()
API: GstRingBuffer:gst_ring_buffer_convert()
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_acquire), (gst_audioringbuffer_release),
(gst_audioringbuffer_stop):
Signal thread startup earlier so that we can immediatly go into pull
mode when we have to and block on preroll.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read):
In pull mode we want the callback to prepull a buffer we can preroll on
even when we are not yet playing.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Fix debug statements (space between '%' and actual format).
Original commit message from CVS:
* gst-libs/gst/audio/audio.h: (GST_AUDIO_FIELD_SIGNED):
Remove trailing comma from enum list, which causes problems
with -pendantic (#550729).
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosrc.c: (gst_audioringbuffer_stop):
Disable a code path that is now called but causes a deadlock for some
reason and is unneeded.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (gst_audioringbuffer_stop):
Since we now call stop, we trigger this code path that causes a deadlock
is apparently not needed.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_stop):
Also allow the case where the ringbuffer was paused when we try to stop
it so that the basesrc stop function is still called.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
When not slaved to another clock also subtract the base_time from our
internal clock time to get the running time.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstaudiosrc.h:
More docs and shuffling. What can we do with the hundreds of #defines.
Original commit message from CVS:
* gst-libs/gst/audio/audio.h:
* gst-libs/gst/audio/gstaudiofilter.h:
* gst-libs/gst/audio/gstringbuffer.h:
* gst-libs/gst/interfaces/propertyprobe.h:
* gst-libs/gst/tag/gsttagdemux.h:
Reducing number of dundocumented symbols.
Original commit message from CVS:
* gst-libs/gst/audio/audio.c:
Fix doc comment syntax.
* gst-libs/gst/interfaces/propertyprobe.c:
Add more doc-comments and a FIXME: for the signal.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_render):
Report latency even if we are not live instead of hiding it.
Take ts-offset and render-delay of the basesink into account when
scheduling samples.
Rework the clipping code so that we can take the various offsets into
account and still do correct clipping.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: Make gst_audio_check_channel_positions() public.
* tests/check/libs/audio.c: (GST_START_TEST):
Add some simple checks for gst_audio_check_channel_positions().
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init):
Add a gtk-doc chunk for the new properties to have a Since: indication.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_class_init), (gst_base_audio_src_dispose),
(gst_base_audio_src_get_property), (gst_base_audio_src_setcaps),
(gst_base_audio_src_change_state):
Provide readable actual-buffer-time and actual-latency-time properties
that reflect the configured ringbuffer values. Fixes#524724.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudioclock.c: (gst_audio_clock_init),
(gst_audio_clock_reset), (gst_audio_clock_get_internal_time):
* gst-libs/gst/audio/gstaudioclock.h:
Add method to inform the clock that the time starts from 0 again. We use
this info to calculate a clock offset so that the time we report in
internal_time is monotonically increasing, as required by the clock base
class. Fixes#521761.
API: GstAudioClock::gst_audio_clock_reset()
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Reset reported time when we (re)create the ringbuffer.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
Allow non-standard 2 channel layouts.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some tests for converting and remapping non-standard 1 and 2
channel layouts.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_sync_latency):
We can only use our optimal calibration if we prerolled before the
latency expired.
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnome_vfs_src_init),
(gst_gnome_vfs_src_finalize),
(gst_gnome_vfs_src_received_headers_callback),
(gst_gnome_vfs_src_create), (gst_gnome_vfs_src_stop):
* ext/gnomevfs/gstgnomevfssrc.h:
Set the ICY caps on the srcpad from where they get picked up by the base
class now and set on the outgoing buffers.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
* sys/v4l/v4lsrc_calls.c: (gst_v4lsrc_buffer_new):
BaseSrc now sets the caps on outgoing buffers automatically.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_resample_slaving),
(gst_base_audio_sink_skew_slaving),
(gst_base_audio_sink_sync_latency), (gst_base_audio_sink_render),
(gst_base_audio_sink_async_play),
(gst_base_audio_sink_change_state):
Change the way in which the ringbuffer is started when dealing with a
slaved clock and latency. We now sync to the clock until we reach
upstream latency before starting the ringbuffer. This has the effect
that we can accurately align the master and slave clocks and let the
rate correction code take care of the initial drift or rounding errors
instead of leaving them uncorrected with the old approach.
