Commit graph

15027 commits

Author SHA1 Message Date
Sebastian Dröge
32e05f8a1e typefind: Only push CAPS event once if we get one from upstream
https://bugzilla.gnome.org/show_bug.cgi?id=692784
2013-04-29 13:24:56 +02:00
Sebastian Dröge
2a34f767d4 typefind: Stop typefinding if we get a CAPS event from upstream 2013-04-29 13:24:56 +02:00
Sebastian Dröge
0fda329bbb typefind: Improve handling of GAP events
There's still room for improvement though.
2013-04-29 13:24:56 +02:00
Sebastian Dröge
fc4105c1f9 typefind: Forward events that should happen before the caps event directly
There's no point in storing them and sending them later, and doing so would
later require to distinguish between events that should come before caps and
after.

https://bugzilla.gnome.org/show_bug.cgi?id=692784
2013-04-29 13:24:56 +02:00
Sebastian Dröge
cf0566f9ca typefind: Only push pending buffers and events if we have caps 2013-04-29 13:24:56 +02:00
Sebastian Dröge
922815996f typefind: Remove code that would cause caps to be sent twice
Whenever we set typefind->caps we will also send a caps event downstream.
2013-04-29 13:24:56 +02:00
Wim Taymans
25fc832d49 pwg: improve allocation docs 2013-04-27 20:34:43 +02:00
Tim-Philipp Müller
b48400b7a4 check: set CK_TIMEOUT_MULTIPLIER on ARM
https://bugzilla.gnome.org/show_bug.cgi?id=695599
2013-04-27 11:49:52 +01:00
Tim-Philipp Müller
e1c6a56596 typefind: fix caps leak when used in connection with uridecodebin and playbin
Don't leak forced sink caps.
2013-04-27 00:05:45 +01:00
Thibault Saunier
3b8181a8c5 controller: Fix element-type annotations 2013-04-25 18:51:33 -03:00
Sebastian Dröge
a257cb6f5b inputselector: Try to not push read-only buffers
We should only increase the refcount before pushing if we're
really going to use the buffer afterwards.
2013-04-25 16:39:52 +02:00
Alessandro Decina
ef0e9b6840 tests: add check for FLUSH pad probes 2013-04-25 07:26:29 +02:00
Alessandro Decina
543b92a856 gstpad: run probes for FLUSH events sent with gst_pad_send_event
Move probe handling in gst_pad_send_event_unchecked so that probes are run for
FLUSH events too.
2013-04-25 06:43:29 +02:00
Sebastian Dröge
d420686764 netclock: Add support for IPv6 2013-04-24 15:59:45 +02:00
Tim-Philipp Müller
1905219235 porting-to-1.0.txt: add troubleshooting section
Add note about "cannot register existing type `GstObject'" warning.
2013-04-24 12:30:07 +01:00
Sebastian Dröge
f27a3e12f6 baseparse: Only infer TS if PTS interpolation is enabled
Otherwise this is breaking timestamps of formats that
need reordering.

https://bugzilla.gnome.org/show_bug.cgi?id=597662
2013-04-23 11:49:15 +02:00
Wim Taymans
43620e1642 pad: notify caps property on NULL as well
Also notify the caps property when it changes to NULL
2013-04-23 11:17:05 +02:00
Wim Taymans
49c9d2f229 pad: clarify locking 2013-04-23 11:16:16 +02:00
Tim-Philipp Müller
aafce272ea Automatic update of common submodule
From 3cb3d3c to 5edcd85
2013-04-22 23:50:17 +01:00
Sebastian Dröge
ce8cb1f1b3 part-context: Write some design documentation about GstContext 2013-04-19 15:01:20 +02:00
Sebastian Dröge
eaf1f0db99 part-caps: Add more information about caps features, caps semantics and how to use them 2013-04-19 13:22:48 +02:00
Sebastian Dröge
7ae54c34e5 capsfeatures: Add documentation about ANY GstCapsFeatures 2013-04-19 11:24:38 +02:00
Sebastian Dröge
86b4e1841e basesink: Don't set last_render_time if we're checking for a late buffer before ::prepare()
This makes sure that at least one buffer per second is rendered if buffers
are dropped before ::prepare. Without this change, at least one buffer per
second wouldn't be too late before ::prepare anymore but would be dropped
before ::render because of last_render_time being set before ::prepare
already.
2013-04-19 10:57:01 +02:00
Andre Moreira Magalhaes (andrunko)
a8300a4891 gstvalue: Add compare function for caps 2013-04-18 14:45:47 -03:00
Thiago Santos
1681a1b1e0 dataqueue: add gst_data_queue_peek
This function works just like gst_data_queue_pop, but it doesn't
remove the object from the queue.

Useful when inspecting multiple GstDataQueues to decide from which
to pop the element from.

Add: gst_data_queue_peek
2013-04-18 14:45:47 -03:00
Tim-Philipp Müller
c7a8318452 tests: ignore new test binary 2013-04-18 10:14:09 +01:00
Tim-Philipp Müller
7954ac2ad7 tools: update for latest context API changes 2013-04-18 10:13:30 +01:00
Sebastian Dröge
03c3738b67 context: Add gst_context_writable_structure() and let get_structure() return const again 2013-04-18 10:18:22 +02:00
Tim-Philipp Müller
e8a9f7acdf printf: fix handling of old printf extension specifiers for ABI compatibility
Fixes abort when the old specifiers are used. Fix up the conversion
specifier, it would get overwritten with 'c' below to the extension
format char, which then later is unhandled, leading to the abort.
Also fix up and enable unit test for this.

https://bugzilla.gnome.org/process_bug.cgi
2013-04-18 00:46:58 +01:00
Tim-Philipp Müller
c398c842f5 tests: add unit test for old printf extension specifiers
To make sure we maintain binary compatibility with the old
specifiers.

https://bugzilla.gnome.org/show_bug.cgi?id=698242
2013-04-18 00:28:00 +01:00
Tim-Philipp Müller
e2b09b1ab9 check: run skipped tests if explicitly requested via GST_CHECKS
If a test that's disabled with tcase_skip_broken_test() is listed
in the GST_CHECKS environment variable, run it anyway.
2013-04-18 00:19:23 +01:00
Sebastian Dröge
8f8036f344 gst-launch: Add GstContext support
gst-launch will collect all the contexts from the pipeline elements
and update the overall pipeline context with it.
2013-04-17 13:47:35 +02:00
Sebastian Dröge
f5f0dd50c8 context: Add unit test for GstContext 2013-04-17 12:44:29 +02:00
Sebastian Dröge
0d6440b8d9 context: Return a non-const GstStructure to make code simpler and update docs 2013-04-17 12:17:49 +02:00
Philippe Normand
54c678a21e query: new _BANDWIDTH_LIMITED flag
Source elements with limited bandwidth capabilities and supporting
buffering for downstream elements should set this flag when answering
a scheduling query. This is useful for the on-disk buffering scenario
of uridecodebin to avoid checking the URI protocol against a list of
hardcoded protocols.

Bug 693484
2013-04-16 16:52:08 +02:00
Tim-Philipp Müller
4997fd9f94 docs: fix missing flacdec in porting-to-1.0 pipeline example 2013-04-16 09:55:00 +01:00
Tim-Philipp Müller
9dd28ae13b docs: add note about decoders and parsers to porting-to-1.0 doc 2013-04-16 09:03:52 +01:00
Sebastian Dröge
18a7a1d062 gst: Add better support for static plugins
API: GST_PLUGIN_STATIC_DECLARE()
API: GST_PLUGIN_STATIC_REGISTER()

Based on a patch by Håvard Graff <havard.graff@tandberg.com>.

This now allows GST_PLUGIN_DEFINE() to create a static plugin if
GST_PLUGIN_BUILD_STATIC is defined. The resulting plugin can be
statically linked or dynamically linked during compilation but
can't be dynamically loaded during runtime.

Also adds GST_PLUGIN_STATIC_DECLARE() and GST_PLUGIN_STATIC_REGISTER(),
which allows to register a static linked plugin easily.
It is still required to manually register every single statically linked
plugin from inside the application as this can't be automated in a portable
way.

A new configure parameter --enable-static-plugins was added that allows
to build all plugins we build here as static plugins.

Fixes bug #667305.
2013-04-15 15:52:18 +02:00
Douglas Bagnall
142a55042f manual: Patch manual to refer to porting guide
https://bugzilla.gnome.org/show_bug.cgi?id=697845
2013-04-15 09:27:15 +02:00
Sreerenj Balachandran
899bbf310b pluginfeature: Fix the GstPluginFeature name comparison.
The gst_plugin_feature_rank_compare_func() should return
negative value, if the rank of both PluginFeatures are equal and
the name of first PluginFeature comes before the second one.

https://bugzilla.gnome.org/show_bug.cgi?id=697990
2013-04-15 09:24:08 +02:00
Tim-Philipp Müller
17991cf212 Automatic update of common submodule
From 2736592 to 3cb3d3c
2013-04-14 17:54:22 +01:00
Tim-Philipp Müller
ef6e3512b6 Automatic update of common submodule
From aed87ae to 2736592
2013-04-14 17:25:35 +01:00
Tim-Philipp Müller
109be629b7 printf: disable some unused printf variants 2013-04-14 11:33:41 +01:00
Tim-Philipp Müller
91c42b9380 printf: use sprintf() to work around glibc complaining about %n in a writable format string
Don't use snprintf(), but use sprintf instead and do our own
length calculations, because glibc may complain about us passing
%n in a format string if the string is in writable memory, and
here the format string is always in writable memory since we
construct it on the fly. This happens if glibc has been compiled
with _FORTIFY_SOURCE=2, which seems to be the case on some
distros/systems). On the upside, we now use the sprintf code path
on all systems which should be better from a maintenance point
of view.

https://bugzilla.gnome.org/show_bug.cgi?id=697970
2013-04-14 11:23:10 +01:00
Tim-Philipp Müller
637e8b5e1c tests: skip all GstPoll tests on Windows
As they don't work there, and it's non-trivial to fix.

https://bugzilla.gnome.org/show_bug.cgi?id=697609
2013-04-13 12:20:06 +01:00
Tim-Philipp Müller
21e584696d gst-inspect: only add a '*' for non-'gpointer' pointers
Spotted by Jose Antonio Santos Cadena.

https://bugzilla.gnome.org/show_bug.cgi?id=697791
2013-04-13 12:00:12 +01:00
Gwenole Beauchesne
f43b756f39 plugin: fix name expansion for GST_PLUGIN_DEFINE macro
Make GST_PLUGIN_DEFINE use G_STRINGIFY() to convert the name argument
into a meaningful string. The advantage of this is that `name' can be
expanded from other macros defined in the plug-in element.

Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>

https://bugzilla.gnome.org/show_bug.cgi?id=697872
2013-04-13 11:40:26 +01:00
Tim-Philipp Müller
d2d2b890a5 po: add new translatable strings 2013-04-13 11:35:49 +01:00
Tim-Philipp Müller
0e1dd050a5 printf: don't build if debugging subsystem was disabled 2013-04-13 01:19:41 +01:00
Tim-Philipp Müller
5299a0cd65 printf: deal with some of the HAVE_FOO used in the printf code
Probably needs some more work for MSVC.
2013-04-12 23:05:59 +01:00