Adding an extra condition while calling gst_caps_unref (templ)
and replacing gst_caps_make_writable (gst_caps_ref (caps)) with
gst_caps_copy (caps) in line 177, since the functionality is same.
https://bugzilla.gnome.org/show_bug.cgi?id=735795
We return EOS after the first buffer, and GstPad will make sure now that we
won't get any other buffer afterwards until a flush happens. No need to check
for it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=735581
FLV documentation stipulates that timestamp must start at zero.
In order to respect this rule, keep the first timestamp around
and offset the timestamp from this value. This allow for longer
recording time in presence of timestamp that does not start
at 0 already.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The tags in FLV are DTS. In audio cases, and for many video format this makes
no difference, but for AVC with B-Frames, PTS need to be computed from
composition timestamp CTS, with PTS = DTS + CTS.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The jitterbuffer shouldn't force clock-rate on its sink pad, this will cause a negotiation issue since rtpssrcdemux doesn't have the clock-rate and doesn't add it to the caps. The documentation states that the clock-rate can either be specified through the caps or through the request-pt-map signal, so we must remove clock-rate from the pad templates and we must accept the GST_EVENT_CAPS if the caps don't have the clock-rate.
https://bugzilla.gnome.org/show_bug.cgi?id=734322
udpsrc gtk-doc documentation refers to sockfd and closefd properties which has
been removed. This patch replaces those references to socket and close-socket
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=734987
The old default timescale of 1 millisecond produces irrational
numbers for a lot of framerate/audio-packet-duration multiples.
1/1800 is a nicer number, as it tends to produce better fractions
and therefore slightly higher accuracy overall
Change the way the output framerate is calculated
to ignore the first sample (which is sometimes truncated
in my testing) and use the new gst_video_guess_framerate()
function to recognise common standard framerates better.
Remove the code that was sorting the first 20 sample
durations and then ignoring the result.
Commit 2b9493b5 broke this in two ways: a) we should only
pass duration queries in TIME format upstream (or at least
not those in DEFAULT or BYTE format), and b) we mustn't
overwrite the default value of 'res' from TRUE to FALSE
and not set it again later. This led to bogus durations
being reported for FLV playback from file, because TIME
queries would fail (as 'res' had been set to FALSE) and
parsers then do a BYTE query as fallback and try to
guesstimate something in return, which of course goes
horribly wrong since the BYTE size returned is for the
muxed file.
When changing the properties to not be in passthrough mode anymore,
we will only accept caps we can process ourselves, potentially causing
a not-negotiated error.
https://bugzilla.gnome.org/show_bug.cgi?id=720345
This makes sense in DASH reverse playback, where the upstream dashdemux
will download DASH segments in reverse order, but push their buffers
forward to qtdemux and mark each segment start as DISCONT. This needs
to be forwarded downstream to the parser/decoder, otherwise it won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=734443
When writing out a trak with an edit list, make sure the
overall file duration is also updated to reflect the
lengthening of the stream.
Add some more debug to qtdemux to warn about streams that
are longer than the file and get truncated.
We only want to unlock if we push an event downstream and
jump to done_unlock label afterwards. We would also unlock
in case of a segment seek and then unlock again later, and
nothing good can come of that.
(This code looks a bit dodgy anyway though, shouldn't it
also bail out with FLOW_EOS here in case of a segment seek
scenario, just without the event?)
gst_matroska_parse_take() would return FLOW_ERROR instead of
FLOW_EOS in case there's less data in the adapter than requested,
because buffer is NULL in that case which triggers the error
code path. This made the unit test fail (occasionally at least,
because of a bug in the unit test there's a race and it would
happen only sporadically).
Decoder complains about "notification: Invalid mode encountered.
The stream is corrupted" though, even if it works, so there's
probably something wrong with the generated codec headers.
Implement 3 different cases for handling the SR:
1) we don't have enough timing information to handle the SR packet and
we need to wait a little for more RTP packets. In that case we keep
the SR packet around and retry when we get an RTP packet in the
chain function.
2) the SR packet has a too old timestamp and should be discarded. It is
labeled invalid and the last_sr is cleared.
3) the SR packet is ok and there is enough timing information, proceed
with processing the SR packet.
Before this patch, case 2) and 1) were handled in the same way,
resulting that SR packets with too old timestamps were checked over and
over again for each RTP packet.
This patch adds supports for the incoming key management parameters for
encryption and authentication key lengths.
It also adds a new signal request-rtcp-key that allows the user to
provide the crypto parameters and key for the RTCP stream.
https://bugzilla.gnome.org/show_bug.cgi?id=730473
Use a different variable name to make it clear that we are calculating
the header size.
Correctly check that we have enough bytes to read the header bits. We
were checking if there were 5 bytes available in the header while we
only needed 3, causing the packet to be discarded as too small.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=723595
Similarly to what we did with the DELTA_UNIT flag, this patch
propagates the DISCONT flag to the first RTP packet being used to transfer a
DISCONT buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Downstream elements may be interested knowing if a RTP packet is the start
of a key frame (to implement a RTP extension as defined in the
ONVIF Streaming Spec for example).
We do this by checking the GST_BUFFER_FLAG_DELTA_UNIT flag we receive from
upstream and propagate it to the *first* RTP packet outputted to transfer this
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Pre-allocate buffer list of the right size to avoid re-allocs.
Avoid plenty of double runtime cast checks and re-doing the
same calculation over and over again in rtp_vp8_calc_payload_len().
Only call gst_buffer_get_size() once.
Collect buffers to send out in buffer lists instead of
pushing out single buffers one at a time. For HD video
each frame might easily add up to a couple of thousand
packets, multiply that by the frame rate and that's a
lot of push() and sendmsg() calls per second.
A good reason to push out buffers as early as possible is
latency, so we don't accumulate the whole frame in a single
buffer list, but instead push it out in a few chunks, which
is hopefully a reasonable compromise.
Make sure that if AYUV is received it will detect that it can produce
both RGB and YUV formats
Signed-off-by: Ravi Kiran K N <ravi.kiran@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=725248
The code would previously crash trying to insert a NULL string
into a hash table.
It does seem a little broken that indexing is done by MIME type
and not by index though, unless the spec says there cannot be
two parts with the same MIME type.
https://bugzilla.gnome.org/show_bug.cgi?id=659573
This event was not sent. Send it before caps, this requires the pad to
be parented. This removes warning like: "Got data flow before
stream-start event".
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=731475
If the wav header contains an extended chunk, we want to keep
the codec_data field, but not for raw audio.
This fixes some elements (such as adder) from failing to intersect
raw audio caps which would otherwise be intersectable.
Handle the transformation matrix cases where there are only simple rotations
(90, 180 or 270 degrees) and use a tag for those cases. This is a common scenario
when recording with mobile devices
https://bugzilla.gnome.org/show_bug.cgi?id=679522
tentacle3d.c:268:7: error: using integer absolute value function 'abs' when
argument is of floating point type [-Werror,-Wabsolute-value]
if (abs (tmp - fx_data->rot) > abs (tmp - (fx_data->rot + 2.0 * G_PI))) {
^
tests.c:161:16: error: taking the absolute value of unsigned type
'unsigned long' has no effect [-Werror,-Wabsolute-value]
t->diff += labs (GST_BUFFER_TIMESTAMP (buffer) - t->expected);
1) sources that have sent BYE in the past cannot be senders, since
they would have timed out to being receivers in the meantime...
2) sources that have sent BYE are now being removed earlier inside
this function
If we are inserting a packet into the jitter queue we need to keep
looping through the items until the right position is found. Currently,
the code stops as soon as an event is found in the queue.
Regarding events, we should only move packets before an event if there
is another packet before the event that has a larger seqnum.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=730078
If two streams request a retranmission for the same SSRC, ignore the second
one if the first oen is less than one second old, otherwise time out the first
one and ignore the second.
As we now replace the local RTPSource on a conflict, it's no longer possible
to keep local conflicts in the RTPSource, so they instead need to be kept
in the RTPSession.
Also fix the rtpcollision test to generate multiple collisions instead of
one by change the address, as otherwise we detected that it was a single one.
If we're missing part of the clut, do not try to use it. It seems
very likely the break was meant to break out of the switch rather
than from the loop.
Coverity 1139878
Even if one woul hope one pixel can fit in a MTU, ensure we do not
overwrite a buffer if this is not the case.
Spotted while looking at Coverity 1208786
Rework the packet queue so that the most common action (insert a packet
at the tail of the queue) goes very fast.
Report if a packet was inserted at the head instead of the tail so that
we can know when to retry _pop or _peek.
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
gstdeinterlace.c: In function 'gst_deinterlace_output_frame':
gstdeinterlace.c:1537:57: error: 'pattern.length' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This actually is always initialized before it is used there, but
let's just silence gcc here.
Make a new method to disable the jitterbuffer buffering.
Rework the update_estimated_eos() method. Calculate how much time
there is left to play. If we have less than the delay of the
jitterbuffer, we disabled buffering because we might never be able to
fill the complete jitterbuffer again.
If we receive an EOS event, disable buffering. We will drain the
buffer and eventually push the EOS event out.
When we reach the estimated NPT timeout and we didn't receive an EOS
event, make one and queue it so that it can be pushed.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
When the internal-ssrc property changes, we want to send a reconfigure
upstream to make payloaders use the new suggested ssrc.
Using the internal-ssrc property to change the SSRC of a stream is not a
good idea and doesn't work when there are multiple senders, we want to
set the SSRC directly on the payloaders. Therefore, deprecate this
property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725361
Rework the logic to make buffering messages a little, make sure we
don't make the same message multiple times.
Consider the buffer full when EOS was received.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
