get_colorspace() checks input caps transfer when mapping V4L2_XFER_FUNC_709
back to V4L2_COLORSPACE_BT2020 and GST_VIDEO_TRANSFER_BT2020_12. After
receiving source change event, decoder will G_FMT and S_FMT again. So need
to reset transfer when acquiring format to avoid using the old transfer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2475>
In case of per features registration such as the
customizable gstreamer-full library, each
element should check that the soup library can be loaded to
facilitate the element registration.
Initialize the debug category properly
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2349>
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.
But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.
Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.
So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
- Consistently unref the chained buffer at the end of the chain
function, if we're not handing it off to `gst_pad_push`. This avoids a
few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
crashing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.
Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
If for some reason the encoder produces frames with a pts higher than
the input one, we were dropping all the video encoder frames and ended
up crashing when trying to access the pts of a NULL pointer returned by
gst_video_encoder_get_oldest_frame().
I hit this scenario by feeding a decreasing timestamp to vp8enc which
seem to confuse the encoder.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2405>
Hantro H1 and Rockchip VEPU2 drivers will pad the width/height to a
multiple of 16. In order to obtain the right JPEG size, the image needs
to be cropped using the S_SELECTION API. This support is added as best
effort since older drivers may emulate this by looking at the capture
queue width/height.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2329>
mp4mux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
flvmux can't negotiate caps with upstream/downstream and always outputs
specific caps based on the input streams. This will always happen before
it produces the first buffers.
By having the default aggregator negotiation enabled the same caps
would be pushed twice in the beginning, and again every time a
reconfigure event is received.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2372>
Mixing C loops with switch statements is a bad idea as break has a
different meaning in both. Breaking inside the switch statements wrongly
caused further loop iterations.
Instead use goto to get out of the loop and continue to do another loop
iteration, and never ever use break except for the end of a case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2336>
In push mode (streaming), if the received chunk buffer size from _chain is bigger
than output buffer size, the flags of the divided-buffers are propagated to the
DISCONT flag from first received chunk buffer. This unexpected buffers contained DISCONT
flags are abnormally transformed when changing the sampling rate by audioresample element.
So unset unnecessary DISCONT flag before pad_push().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2305>
Previously, we only added it when actually performing synchronization
based on the NTP time.
The information can be useful downstream in other situations too, and
we can compute a NTP time as soon as we get a sender report with the
relevant information.
Co-authored-by: Mathieu Duponchelle <mathieu@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
When the sink is configured to create sockets with an explicit bind
address, then the created socket gets set to the udp_socket field
irregardless of whether the bind address indicated that the socket
family should be IPv4 or IPv6. When binding to an IPv6 address, this
results in the following error:
gstmultiudpsink.c:1285:gst_multiudpsink_configure_client:<rtcpsink>
error: Invalid address family (got 10)
This patch adds a check of the address family being bound to and sets
the created socket to used_socket or used_socket_v6, accordingly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1551>
RFC 8216 6.3.3 "Playing the Media Playlist File" : states that for live media
playlists "the client SHOULD NOT choose a segment that starts less than three
target durations from the end of the Playlist file"
This is an off-by-one error. Since we are looking for the "index" of the
segment, we need to subtract 1 from the searched position.
Ex: For a playlist with 12 entries, we want to start playback on the 9th segment
... which is at index 8.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2259>
The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.
This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.
This seems to have also fixed some documentation issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.
These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).
Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.
Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.
While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
Represents touchscreen events as a trail of black squares, one for each
reported position. Additionally, this adds the `display-mouse` and
`display-touch` properties to toggle visibility of mouse/touchscreen
events, since touchscreens often emulate mouse events, as well as
logging for all received navigation events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1633>
Two RTP Header extensions are very relevant for rtprtxsend/receive.
1. "urn:ietf:params:rtp-hdrext:sdes:rtp-stream-id": will always be removed
2. "urn:ietf:params:rtp-hdrext:sdes:repaired-rtp-stream-id": will be written
instead of the "rtp-stream-id" header extension.
Currently it's only a simple replacement of one header extension for
another however a future change would only add the relevant extension
based on some heuristics (like, video frames only on one of the rtp key
frame buffers, or only until the rtx ssrc has been validated by the peer)
in order to reduce the required bandwidth.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1759>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
When syncing to an RFC7273 clock this will add the original
reconstructed reference clock timestamp to buffers in form
of a GstReferenceTimestampMeta.
This is useful when we want to process or analyse data based
on the original timestamps untainted by any local adjustments,
for example reconstruct AES67 audio streams with sample accuracy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1964>
Previously the result of the calculations included inaccuracies caused
by the NTP clock estimation, which caused the timestamps to jitter
+/- 1/clockrate.
By reorganizing the calculations it is possible to get rid of this
inaccuracy and calculate deterministic and exact packet timestamps based
on the actual NTP clock as long as the estimation is not off by more
than 2**31 clockrate units.
The only remaining inaccuracy that is introduced now is caused by the
conversion from the NTP clock to the pipeline clock.
Also split up debug output, demote many messages to the trace debug
level and output more intermediate results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1955>
This is difficult to encounter in ordinary networks, but is
encountered when using tc-netem to add random delays to packets, and
also when your UDP stream is bonded over multiple links with varying
characteristics.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1952>
Gapless playback is handled by adjusting buffer timestamps & durations
and by adding GstAudioClippingMeta.
Support for "Frankenstein" streams (= poorly stitched together streams)
is also added, so that gapless playback support doesn't prevent those
from being properly played.
Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1028>
Add properties to control input cropping in the V4L2 device.
The input cropping is applied before composing the result to the
capture buffer. By default the capture size will be set to the same
size as the crop region, but it can be scaled to a different output
frame size if supported by the V4L2 device.
If scaling is not supported, the cropped image will
be composed as is into the top-left corner of the capture buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
Get the current crop bounding region from the V4L2 device so
that it can be provided to applications and used to validate
crop settings. Also make the default crop region available so
that it can be used to reset the crop when appropriate.
Uses the selection API when available with fallback to the crop
API for older kernels.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
The gst_v4l2_object_set_crop() is used for removing buffer
alignment padding. Give it a name that better reflects
that usage. This helps to distinguish from cropping of the
input image (e.g. cropping at the image sensor on a captre
device), which can be unrelated to the memory buffer padding,
especially if scaling is involved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1089>
This patch fixes a seg.fault in gst_structure_new() with warnings as below.
GLib-GObject-WARNING **:
../gobject/gtype.c:4330: type id '0' is invalid
GLib-GObject-WARNING **:
can't peek value table for type '<invalid>' which is not currently referenced
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1918>
The point here is that rtpsession will create a new rtpsource when
the field "rtx-ssrc" is present, and when not doing rtx, that means
a random ssrc will create a new rtpsource that will be included in RTCP
messages for the current session.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1882>
When doing only a single stream of audio/video this hardly matters,
but when doing many at the same time, the fact that you have to get
a hold of the glib global type-system lock every time you process a buffer,
means that there is a limit to how many streams you can process in
parallel.
Luckily the fix is very simple, by doing a cast rather than a full
type-check.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1873>
There is a chance that pool->buffers[index] sets BUFFER_STATE_QUEUED, but
it has not been queued yet which makes pool->buffers[index] still NULL.
At this time, if pool_streamff release all buffers with BUFFER_STATE_QUEUED
state regardless of whether the buffer is NULL or not, it will cause segfault.
To fix this, also check buffer when streamoff release buffer.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1842>
When the size of V4L2 capture or output is changes with VIDIOC_S_FMT,
the device is only required to update the compisition window to fit
inside the new frame size. This can result in captured data only being
updated on a portion of the frame after a resize.
Update the composition window to the default value determined by the
V4L2 device driver whenever the format is changed to make sure that
all image data is composed to its full size.
Fixes#765
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1806>
Not having this field is equivalent with it being 1/1 so consider
it like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
Not having these fields is equivalent with them being mono/0 so consider
them like that. The generic caps functions are not aware of these
semantics and would consider the caps different, causing a negotiation
failure when caps are changing from caps with to caps without or the
other way around.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1826>
If the tracks element was parsed from the SeekEntry, don't
parse it a second time and recreate tracks, as this
loses any tags that were read using the seek table.
If a genuinely new Tracks element is found, do read that
as it is needed for MSE support.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1798>
Do not maintain similar build instructions within each gst-plugins-*
subproject and the subproject/gstreamer subproject. Use the build
instructions from the mono-repository and link to them via hyperlink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1743>
LOAD macro relies in m7 being zero for interleaving purposes. Using LOAD
on the m7 register makes it interleave with its new content instead of
with 0.
The effect of this bug was bobbing on some static lines that appeared
over fast-moving content.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1816>
