Never skip the state change to playing, even if the element is already in the
right state. We need this because we also distribute the base_time while doing
the state change and skipping this step would leave some elements without a new
base_time.
Fixes#600313
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
Post the structure change messages on the sinkpads of the elements. This allows
us to catch unlinked pads earlier without ending up with inconsistent element
degrees.
When we detect a pad unlink in progress, we will not be updating the degree of
the parent element. This can cause false loop detected warnings because the
degree counter is invalid. Handle this case by marking the iterator as 'dirty'
when we detect a pad unlink and avoid emiting the warning in this case. We have
to continue our state change as good as we can, we will eventually resync when
the pad unlink completed.
When an element is added to the bin, only set the index if we have a
cached index, rather than setting a NULL index on elements that might
have a default index object of their own.
Cache the last index that was set with _set_index() and return this in the
_get_index() call.
Set the cached index on newly added elements.
Fixes#566881
When we get an ASYNC_DONE message when a state change was busy, set the
pending_async_done flag so that after the state change completes, the bin can
check if all async elements are finished. Don't only do this for the bin itself
but for all elements.
This fixes some bins in bins that simulate async state changes by posting ASYNC
messages (such as sdpparse in uridecodebin/playbin2).
Bin collects segment-start messages and segent-done messages. it posts a
segment-done message to its parent, once it has received a segment-done for
each segment-start. Imho it should also send a segment-start if it receives the
first segment start and if parent is !=NULL. This is needed for bins in bins,
so that also higher order bins can group segment-starts and segment-dones.
Right now higher order bins will post a segment-done for each segment-done
received.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_set_index_func), (gst_bin_set_clock_func),
(gst_bin_change_state_func):
Use an iterator to set the clock and the index so that we can release
the object lock appropriately. Fixes#566393.
Original commit message from CVS:
* gst/gstbin.c: (_gst_boolean_accumulator), (gst_bin_class_init),
(gst_bin_recalculate_latency), (gst_bin_do_latency_func),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add do-latency signal with the old default fallback implementation. This
allows for custom latency calculations for when the default is not
sufficient.
API: GstBin::do-latency signal.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_recalculate_latency),
(gst_bin_change_state_func):
* gst/gstbin.h:
Add method to recalculate and redistribute the latency on a bin.
API: gst_bin_recalculate_latency().
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
Base on Patch by: Olivier Crete <tester at tester dot ca>
* gst/gstbin.c: (gst_bin_init), (gst_bin_add_func),
(gst_bin_remove_func), (update_degree),
(gst_bin_sort_iterator_new), (gst_bin_handle_message_func):
Keep track of pads that are being linked/unlinked and resync the state
changes.
* gst/gstpad.c: (gst_pad_get_direction),
(gst_pad_set_chain_function), (gst_pad_set_getrange_function),
(gst_pad_set_checkgetrange_function), (gst_pad_unlink),
(gst_pad_link_prepare), (gst_pad_link),
(gst_pad_event_default_dispatch), (gst_pad_chain), (gst_pad_push),
(gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
Some code cleanups, use macros to check pad direction.
Don't need to take the lock on the pad direction.
Post structure change when pads are linked/unlinked.
Change some checks into _return_if_fail().
* tests/check/gst/gstbin.c:
(test_link_structure_change_state_changed_sync_cb),
(GST_START_TEST), (gst_bin_suite):
Add testcase for pad link/unlinke resync during a state change.
Fixes#510354.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
Take the (recursive) state lock between getting the locked state of an
element and changing the element state. This allows the application to
lock an element's state and then change its state without races.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
When an element is in the locked state we still want to update the
base_time of the element.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (bin_handle_async_done),
(gst_bin_handle_message_func):
Fix race for bins that simulate ASYNC state changes by inserting
ASYNC_START and ASYNC_DONE messages in their bus. We need to check for
pending ASYNC messages even when the bin does not have ASYNC children.
We note detect this behaviour because we will receive an ASYNC message
that is originating from the bin itself.
Fixes races with decodebin2 state changes.
* tests/check/gst/gstbin.c: (GST_START_TEST):
Add some more debug.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* docs/gst/gstreamer.types:
* docs/gst/gstreamer.types.in:
* gst/Makefile.am:
* gst/gst.c:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_set_index_func):
* gst/gstconfig.h.in:
* gst/gstelement.c: (gst_element_get_index):
* gst/gstregistrybinary.c: (gst_registry_binary_save_feature),
(gst_registry_binary_load_feature),
(gst_registry_binary_read_cache):
* gst/gstregistryxml.c: (load_feature),
(gst_registry_xml_read_cache), (gst_registry_xml_save_feature):
* plugins/Makefile.am:
* tools/gst-indent:
* tools/gst-inspect.c: (print_index_info), (print_element_list),
(print_plugin_features), (print_element_features):
* tools/gst-xmlinspect.c: (print_event_masks),
(print_element_info):
* win32/common/gstconfig.h:
Remove GST_DISABLE_(ENUMTYPES|INDEX|URI) everywhere.
Disabling the indexers and URI handler code will only reduce the
required amount of memory by a very small amount but on the other hand
requires much more maintaince work. Apart from that many places of
code are broken when disabling them.
Disabling the enum types doesn't reduce the required amount of memory
by more than a few bytes and makes it hard to fix bugs like #539772,
i.e. use the enums as GObject properties.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose):
Use the GLib stuff to create a private structure.
Add some locking around some dispose methods to make them a little
safer, see #529723. Patch by: Antoine Tremblay <hexa00 at gmail dot com>
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Move GParamSepc macros to standart section.
* gst/gstbin.c:
Dn't document _get_type - its in private section in docs anyway and
this doc-blob was incomplete.
* gst/gstclock.h:
Fix wrong symbol names in docs.
* gst/gstmacros.h:
Add once doc sentence.
* tests/check/gst/.cvsignore:
Ignore more.
Original commit message from CVS:
* docs/random/ensonic/profiling.txt:
More ideas.
* gst/gstbin.c:
Fix typo and give better log output.
* gst/gstdebugutils.c:
* gst/gstdebugutils.h:
More ideas, make graphs a bit smaller and fix param name in macro.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_change_state_func), (gst_bin_continue_func):
Change email, cleanups add some more debug and comments.
Also set bus and clock on new elements when the pipeline was in error.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_done):
Correctly set the next state if all of our async children commited their
state. This makes sure we can actually cancel the state change in
progress. Fixes a regression in Rhythmbox when seeking.
Original commit message from CVS:
* gst/gstbin.c: (remove_from_queue):
Work around a problem with pipelines containing (semi)loops until a
proper, more complicated solution is ready. See #475455.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_latency_fold), (gst_bin_query):
A latency query fails when one of the sinks fail.
* gst/gstelement.c: (gst_element_set_base_time):
Improve debugging.
