Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_probe_caps_for_format):
If VIDIOC_ENUM_FRAMESIZES is defined (= recent kernel), but the
corresponding ioctl() call fails even though the driver claims to
support this format, just fall back to the pre-2.6.19 kernel
routine that creates caps with suitable height and width ranges
(see #448278).
Original commit message from CVS:
patch by: Yun Zheng Hu
* sys/osxaudio/gstosxaudiosrc.c:
Use default input device instead of default output device and
only memcpy actual available bytes.
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_grab_frame):
Fixes "v4l2src ! queue ! xvimagesink". The queue ask for buffer too
early. It is temporary until we find something better.
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c: (gst_v4l2_buffer_finalize),
(gst_v4l2src_grab_frame):
Add some more debug info. Generate an error when we run out of buffers
for some reason. See #480557.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/v4l2src_calls.c:
When probing the formats and sizes a camera supports, make
sure the best ones (highest resolution, prefered format)
end up at the beginning of the probed caps and the less
desirable ones at the end. This is important because the
order within the caps matters for things like fixation and
negotiation, ie. what format is chosen in the end.
With recent kernels, the current probing code will end up
querying the supported sizes from lowest resolution to
highest resolution, adding them to the probed caps in that
order, resulting to v4l2src fixating to the lowest possible
resolution if downstream does not express a size preference.
Also make up a somewhat random ranking of prefered output
formats for the same reason. Fixes#485828.
Original commit message from CVS:
* ext/gconf/gstgconfaudiosink.c:
Fix warning when building without debug.
* sys/oss/gstossmixertrack.c:
Use const like in alsamixertrack.c (fixes warnings).
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c:
(gst_v4l2src_probe_caps_for_format_and_size):
Fix framerate detection code some more.
Handle the case where there is a weird step in the stepwise framerates.
Don't overwrite the min interval with the framerate, use a temp variable
instead.
Use max in the Continuous framerate intervals instead of step, which is
1 according to the docs. Fixes#475424.
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c:
(gst_v4l2src_probe_caps_for_format_and_size):
Don't overwrite our GValue with 0 but instead use the previously
computed value. Fixes#471823 some more.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c:
* sys/v4l2/gstv4l2src.h:
* sys/v4l2/v4l2src_calls.c:
Implement LATENCY queries in the crudest way possible so I don't
have to use sync=false any longer when testing with videosinks.
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c:
(gst_v4l2src_probe_caps_for_format_and_size):
Add some more debugging in the framerate function.
Iterate stepwise framerate up to and _including_ the max and if nothing
was added to the list, add a dummy 0/1 to 100/1 framerate so that we
don't end up with an empty list.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c: (gst_v4l2_get_caps_info),
(gst_v4l2src_set_caps), (gst_v4l2src_get_mmap):
Restructure the setcaps function so that we can also compute the
expected GStreamer output size of the video frames.
Set frame_byte_size correctly so that read-based devices have a chance
of working correctly.
When grabbing a frame, discard frames that are not of the expected size.
Some cameras don't output the right framesize for the first buffer.
Try only a couple of times to get a valid frame, else error out.
* sys/v4l2/v4l2_calls.c: (gst_v4l2_get_capabilities),
(gst_v4l2_fill_lists), (gst_v4l2_get_input):
Add some more debug info when scanning the device.
* sys/v4l2/v4l2src_calls.c: (gst_v4l2_buffer_new),
(gst_v4l2_buffer_pool_new), (gst_v4l2_buffer_pool_activate),
(gst_v4l2src_fill_format_list), (gst_v4l2src_grab_frame),
(gst_v4l2src_set_capture), (gst_v4l2src_capture_init):
Add some more debug info when dequeing a frame.
Original commit message from CVS:
Patch by: Alexander Eichner <alexeichi@yahoo.de>
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_init):
Use define here.
* sys/v4l2/gstv4l2tuner.c:
(gst_v4l2_tuner_set_frequency_and_notify):
Don't touch the property - its still disabled.
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_probe_caps_for_format),
(gst_v4l2src_grab_frame), (gst_v4l2src_get_size_limits):
* sys/v4l2/v4l2src_calls.h:
Improve fallback format negotionation. Fixes#451388
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/directdraw/Makefile.am:
* sys/directsound/Makefile.am:
* sys/waveform/Makefile.am:
Make sure to dist everything needed for win32 builds.
Original commit message from CVS:
2007-06-12 Andy Wingo <wingo@pobox.com>
* sys/v4l2/v4l2src_calls.c (gst_v4l2_buffer_finalize)
(gst_v4l2_buffer_class_init, gst_v4l2_buffer_get_type)
(gst_v4l2_buffer_new): Behave more like ximagesink's buffers, with
finalization and resuscitation. No longer public.
(gst_v4l2_buffer_pool_finalize, gst_v4l2_buffer_pool_init)
(gst_v4l2_buffer_pool_class_init, gst_v4l2_buffer_pool_get_type)
(gst_v4l2_buffer_pool_new, gst_v4l2_buffer_pool_activate)
(gst_v4l2_buffer_pool_destroy): Make the pool follow common
miniobject semantics, and be threadsafe.
(gst_v4l2src_queue_frame): Remove this function, as we just call
the ioctls directly in the two places where we queue buffers.
(gst_v4l2src_grab_frame): Return a flowreturn and fill the buffer
directly.
(gst_v4l2src_capture_init): Use the new buffer_pool_new function
to allocate the pool, which also preallocates the GstBuffers.
(gst_v4l2src_capture_start): Call buffer_pool_activate instead of
queueing the frames directly.
* sys/v4l2/gstv4l2src.h (struct _GstV4l2BufferPool): Make this a
real MiniObject instead of rolling our own refcounting and
finalizing. Give it a lock.
(struct _GstV4l2Buffer): Remove one intermediary object, having
the buffers hold the struct v4l2_buffer directly.
* sys/v4l2/gstv4l2src.c (gst_v4l2src_set_caps): Pass the caps to
capture_init so that it can set them on the buffers that it will
create.
(gst_v4l2src_get_read): For better or for worse, include the
timestamping and offsetting code here; really we should be using
bufferalloc though.
(gst_v4l2src_get_mmap): Just make grab_frame return one of our
preallocated, mmap'd buffers.
Original commit message from CVS:
Patch by: daniel fischer <dan at f3c dot com>
* sys/ximage/gstximagesrc.c: (gst_ximage_src_start),
(gst_ximage_src_get_caps):
Actually use the display_name property so that we can dump any
available X display. Fixes#445905.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdraw_sink_class_init):
Rename the keep-aspect-ratio property to force-aspect-ratio to make
it consistent with xvimagesink and ximagesink.
Original commit message from CVS:
2007-06-06 Andy Wingo <wingo@pobox.com>
* sys/v4l2/v4l2src_calls.c (gst_v4l2src_probe_caps_for_format)
(gst_v4l2src_probe_caps_for_format_and_size): Only probe for
format and size if the ioctls are defined; should fix compilation
on Linux < 2.16.19.
Original commit message from CVS:
2007-06-05 Andy Wingo <wingo@pobox.com>
* sys/v4l2/gstv4l2src.c (gst_v4l2src_start, gst_v4l2src_stop): Add
some useless comments.
* sys/v4l2/v4l2src_calls.c (gst_v4l2src_capture_init): Don't queue
frames before calling STREAMON, that might leave them in a state
where they can't be dequeued if we go back to NULL without calling
STREAMON, according to the docs.
(gst_v4l2src_capture_start): Enqueue buffers here instead, right
before we call STREAMON.
(gst_v4l2src_capture_deinit): Remove crack to work around dequeue
failures. (For me this code hung.) The pool refcounting is still
crack; added a note to that effect.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2object.c (gst_v4l2_object_new): Revert some
unintended changes.
Original commit message from CVS:
2007-05-30 Andy Wingo <wingo@pobox.com>
* sys/v4l2/v4l2src_calls.h:
* sys/v4l2/v4l2src_calls.c (gst_v4l2src_fill_format_list): Store
the format list in the order that the driver gives it to us.
(gst_v4l2src_probe_caps_for_format_and_size)
(gst_v4l2src_probe_caps_for_format): New functions, fill GstCaps
based on the capabilities of the device.
(gst_v4l2src_grab_frame): Update for object variable renaming.
(gst_v4l2src_set_capture): Update to be strict in its parameters,
as in the set_caps below.
(gst_v4l2src_capture_init): Update for object variable renaming,
and reflow.
(gst_v4l2src_capture_start, gst_v4l2src_capture_stop)
(gst_v4l2src_capture_deinit): Update for object variable renaming.
(gst_v4l2src_update_fps, gst_v4l2src_set_fps)
(gst_v4l2src_get_fps): Remove; these functions don't have much
meaning outside of an atomic set_caps method.
(gst_v4l2src_buffer_new): Don't set buffer duration, it is not
known.
* sys/v4l2/gstv4l2tuner.c (gst_v4l2_tuner_set_channel): Remove
call to update_fps; not sure about this change.
(gst_v4l2_tuner_set_norm): Work around the fact that for the
moment we don't have an update_fps_func.
* sys/v4l2/gstv4l2src.h (struct _GstV4l2Src): Don't put v4l2
structures in the object, just store what we need. Do store the
probed caps of the device. Don't store the current frame rate.
* sys/v4l2/gstv4l2src.c (gst_v4l2src_init): Remove the
update_fps_function, for now. Update for new object variable
naming.
(gst_v4l2src_set_property, gst_v4l2src_get_property): Update for
new object variable naming.
(gst_v4l2src_v4l2fourcc_to_structure): Rename from ..._to_caps.
(gst_v4l2_structure_to_v4l2fourcc): Rename from ...caps_to_....
(gst_v4l2src_get_caps): Rework to probe the device for supported
frame sizes and frame rates.
(gst_v4l2src_set_caps): Rework to be strict in the given
parameters: if someone asks us to have a certain size and rate,
that is what we configure.
(gst_v4l2src_get_read): Update for object variable naming. Don't
leak buffers on short reads.
(gst_v4l2src_get_mmap): Update for object variable naming, and add
comments.
(gst_v4l2src_create): Update for object variable naming.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdraw_sink_buffer_alloc),
(gst_directdraw_sink_show_frame),
(gst_directdraw_sink_check_primary_surface),
(gst_directdraw_sink_check_offscreen_surface),
(EnumModesCallback2), (gst_directdraw_sink_get_ddrawcaps),
(gst_directdraw_sink_surface_create):
* sys/directdraw/gstdirectdrawsink.h:
Fix more warnings when compiling with MingW (#439914).
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
Remove directsoundsink property doc as this sink use the mixer
interface now.
* docs/plugins/gst-plugins-bad-plugins.interfaces:
Add interfaces implemented by Windows sinks.
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove directsoundsink property and implement the mixer interface.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectsound.dsp:
Update project files.
* gst-libs/gst/dshow/gstdshow.cpp:
* gst-libs/gst/dshow/gstdshow.h:
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
* gst-libs/gst/dshow/gstdshowfakesink.h:
* gst-libs/gst/dshow/gstdshowfakesrc.cpp:
* gst-libs/gst/dshow/gstdshowfakesrc.h:
* gst-libs/gst/dshow/gstdshowinterface.cpp:
* gst-libs/gst/dshow/gstdshowinterface.h:
* win32/common/libgstdshow.def:
* win32/vs6/libgstdshow.dsp:
Add a new gst library which allow to create internal Direct Show
graph (pipelines) to wrap Windows sources, decoders or encoders.
It includes a DirectShow fake source and sink and utility functions.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowaudiosrc.h:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.c:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.h:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.h:
* win32/vs6/libdshowsrcwrapper.dsp:
Add a new plugin to wrap DirectShow sources on Windows.
It gets data from any webcam, dv cam, micro. We could add
tv tunner card later.
Original commit message from CVS:
* docs/plugins/Makefile.am:
Also look for .m (objectivec) files.
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.args:
* sys/osxvideo/osxvideosink.m:
Add documentation for element and properties.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c: (gst_ddrawsurface_finalize),
(gst_directdraw_sink_buffer_alloc),
(gst_directdraw_sink_get_ddrawcaps),
(gst_directdraw_sink_surface_create):
Bunch of small fixes: remove static function that doesn't exist;
declare another one that does; printf format fix; use right macro
when specifying debug category; remove a bunch of unused variables;
#if 0 out an unused chunk of code (partially fixes#439914).
Original commit message from CVS:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Remove the event-loop-in-separate-thread modifications, because MacOSX
is $#@(*%$# ! For those wondering, the event handling needs to be done
in the main thread after all..
Original commit message from CVS:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix a stupid #if vs #ifdef bug. Should use the proper colorspace now.
Use a separate thread/task for the cocoa event_loop, else it wouldn't
stop.
Original commit message from CVS:
* configure.ac:
* sys/directdraw/Makefile.am:
* sys/directsound/Makefile.am:
Add DIRECTDRAW_CFLAGS and DIRECTSOUND_CFLAGS to Makefile.am; save
and restore the various flags in the directdraw/directsound
detection section. Apparently improves cross-compiling for win32
with mingw32 under some circumstances (#437539).
Original commit message from CVS:
Patch by: Eric Anholt
* sys/ximage/gstximagesrc.c (gst_ximage_src_open_display,
gst_ximage_src_ximage_get):
Use union of all damage between frames to make it faster.
Fixes bug #342463.
Also fix crasher when cursor is at bottom right of window.
Original commit message from CVS:
* sys/ximage/gstximagesrc.c (gst_ximage_src_start,
gst_ximage_src_ximage_get):
* sys/ximage/gstximagesrc.h (last_ximage):
When using Damage actually keep the last frame, and not assume
that the buffer we get already has the last frame on it.
Copy the cursor over if we specify a non-zero start x and
start y.
Original commit message from CVS:
Patch by: jerry tan <jerry dot tan at sun dot com>
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_open):
remove the call of ioctl (fd, AUDIO_MIXER_MULTIPLE_OPEN), it is the
application's responsibility to make sure it open the device once.
Remove a careless error if AUDIODEV is set. Fixes#392620.
Original commit message from CVS:
* sys/osxvideo/osxvideosink.m:
Emit 'have-ns-view' message when working in embedded mode. The message
will contain a pointer to the newly created NSView.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix leaks when running a NSApp.
Accept any kind of resolutions.
Works in fullscreen. Can maximize.
Only thing left before being able to move this to -good is documentation
and embedded window support.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Handle display mode changes during playback.
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_subindex),
(gst_avi_demux_parse_index):
* sys/v4l2/v4l2_calls.c: (gst_v4l2_fill_lists):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_grab_frame):
Printf format fixes; also add some missing quotes in translated
strings. Fixes#416728 and #416727.
Original commit message from CVS:
* sys/sunaudio/gstsunaudio.c: (plugin_init):
* sys/sunaudio/gstsunaudiomixertrack.c:
(gst_sunaudiomixer_track_new):
Actually translate sunaudio mixer track labels instead of just
marking the strings as translatable (#377306); clean up weird
label string mapping code that serves no apparent purpose. Also
set the 'untranslated-label' property when creating mixer tracks
if the GstMixerTrack base class supports this.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/sunaudio.c: (GST_START_TEST),
(sunaudio_suite):
Very minimalistic unit test for sunaudiomixer element (compiles, but not
actually tested on a system where sunaudiomixer is available).
Original commit message from CVS:
2007-03-01 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/ximage/gstximagesrc.c: (gst_ximage_src_open_display):
Error out correctly when getting xcontext fails.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Disable the cocoa event loop since it's a huge memory leak. Should only
matter if the sink isn't used within an NSApp (which has already got
a coca event loop).
Remove all unused code.
Original commit message from CVS:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove include of unused headers.
* sys/waveform/gstwaveformplugin.c:
* sys/waveform/gstwaveformsink.c:
* sys/waveform/gstwaveformsink.h:
* win32/vs6/libgstwaveform.dsp:
Add a new waveform plugin which includes an audio sink
element using the WaveForm win32 API.
* win32/MANIFEST:
Add the new project file form waveform plugin.
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_fill_format_list),
(gst_v4l2src_grab_frame), (gst_v4l2src_set_capture),
(gst_v4l2src_capture_init):
Readd GST_ELEMENT_ERROR if we can't reenque buffers after EIO,
fixes#407369
Original commit message from CVS:
* sys/directdraw/gstdirectdrawplugin.c:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Prepare the plugin to move to good:
Remove unused/untested code (rendering to an extern surface,
yuv format rendering).Use GST_(DEBUG/*)_OBJECT macros
Rename all functions from gst_directdrawsink to gst_directdraw_sink.
Add gtk doc section
Fix a bug in gst_directdraw_sink_show_frame, memcpy line by line
respecting destination surface stride.
* sys/directsound/gstdirectsoundplugin.c:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Prepare the plugin to move to good:
Rename all functions from gst_directsoundsink to gst_directsound_sink.
Add gtk doc section
* win32/common/config.h.in:
* win32/MANIFEST:
Add config.h.in
Original commit message from CVS:
* Makefile.am:
Add win32 MANIFEST
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Clear unused code and add comments.
Remove yuv from template caps, it only supports RGB
actually.
Implement XOverlay interface and remove window and fullscreen
properties.
Add debug logs.
Test for blit capabilities to return only the current colorspace if
the hardware can't blit for one colorspace to another.
* sys/directsound/gstdirectsoundsink.c:
Add some debugs.
* win32/MANIFEST:
Add VS7 project files and solution.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectdraw.dsp:
* win32/vs6/libgstdirectsound.dsp:
* win32/vs6/libgstqtdemux.dsp:
Update project files.
Original commit message from CVS:
* configure.ac:
Activate monoscope when building with --enable-experimental. Fix
--enable-external configure switch description.
* sys/sunaudio/gstsunaudiomixer.c: (gst_sunaudiomixer_base_init):
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_dispose):
Help gst-indent.
Original commit message from CVS:
* configure.ac:
Check for an Objective C compiler
* sys/Makefile.am:
* sys/osxvideo/Makefile.am:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Port of osxvideo plugin to 0.10. Do NOT consider 100% stable !
Fixes#402470
Original commit message from CVS:
* gst/multipart/multipartmux.c: (gst_multipart_mux_collected):
* sys/ximage/ximageutil.c: (ximageutil_check_xshm_calls):
Use G_GSIZE_FORMAT in print statements for portability.
Fixes build on macosx.
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper),
(gst_v4l2_object_set_property_helper),
(gst_v4l2_object_get_property_helper), (gst_v4l2_set_defaults):
* sys/v4l2/gstv4l2object.h:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_class_init),
(gst_v4l2src_init), (gst_v4l2src_set_property),
(gst_v4l2src_get_property), (gst_v4l2src_set_caps):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_fill_format_list),
(gst_v4l2src_grab_frame), (gst_v4l2src_set_capture),
(gst_v4l2src_capture_init), (gst_v4l2src_capture_start),
(gst_v4l2src_capture_deinit):
Fix EIO handing when capturing. Add new property to specify the number of
buffers to enque (and remove the borked num-buffers usage).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directsound/Makefile.am:
* sys/directsound/gstdirectsoundsink.c:
(gst_directsoundsink_reset):
Add directsoundsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392638). Also simplify DirectDraw check a bit.
* tests/check/elements/.cvsignore:
Fix CVS ignore for neonhttpsrc test binary.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directdraw/Makefile.am:
Add directdrawsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392313).
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_center_rect), (gst_directdrawsink_show_frame),
(gst_directdrawsink_setup_ddraw),
(gst_directdrawsink_surface_create):
Comment out some unused things and fix some printf format issues in
order to avoid warnings when buildling with MingW (#392313).
Original commit message from CVS:
* sys/sunaudio/gstsunaudiosink.c: (gst_sunaudiosink_prepare):
Ignore the buffer_time the sound device reports. Turns out it is
sometimes completely bogus and we're better off without it.
Original commit message from CVS:
* sys/sunaudio/gstsunaudiomixerctrl.c:
* sys/sunaudio/gstsunaudiosrc.c:
Use the sunaudio debug category.
* sys/sunaudio/gstsunaudiosink.c: (gst_sunaudiosink_finalize),
(gst_sunaudiosink_class_init), (gst_sunaudiosink_init),
(gst_sunaudiosink_set_property), (gst_sunaudiosink_get_property),
(gst_sunaudiosink_open), (gst_sunaudiosink_close),
(gst_sunaudiosink_prepare), (gst_sunaudio_sink_do_delay),
(gst_sunaudiosink_write), (gst_sunaudiosink_delay),
(gst_sunaudiosink_reset):
* sys/sunaudio/gstsunaudiosink.h:
Uses the sunaudio debug category for all debug output
Implements the _delay() callback to synchronise video playback better
Change the segtotal and segsize values back to the parent class
defaults (taken from buffer_time and latency_times of 200ms and 10ms
respectively)
Measure the samples written to the device vs. played.
Keep track of segments in the device by writing empty eof frames, and
sleep using a GCond when we get too far ahead and risk overrunning the
sink's ringbuffer.
Fixes: #360673
Original commit message from CVS:
* sys/sunaudio/gstsunaudiosink.c: (gst_sunaudiosink_reset):
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_open),
(gst_sunaudiosrc_reset):
Implement reset functions to unblock the src/sink more quickly on
state change requests.
Patch by: Padraig O'Briain <padraig dot obriain at sun dot com>
Original commit message from CVS:
* sys/sunaudio/gstsunaudiomixer.c:
(gst_sunaudiomixer_change_state):
Construct the correct mixer device name when the AUDIODEV env var
is set.
Patch by: Jerry Tan <jerry.tan at sun dot com>
Fixes: #383596
Original commit message from CVS:
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_open):
Apply patch to open the mixer control and set the MULTIPLE_OPEN
ioctl. On solaris, the mixer device doesn't need opening non-blocking
- it can be opened by multiple processes by default, but needs the ioctl for multiple opens within 1 process.
Patch by: Jerry Tan <jerry.tan at sun dot com>
Fixes: #349015
Original commit message from CVS:
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_fill_format_list),
(gst_v4l2src_queue_frame), (gst_v4l2src_grab_frame),
(gst_v4l2src_get_capture), (gst_v4l2src_set_capture),
(gst_v4l2src_capture_init), (gst_v4l2src_buffer_finalize):
cleanup the error message a bit more
Original commit message from CVS:
Patch by: Sergey Scobich <sergey dot scobich at gmail com>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_window_thread),
(gst_directdrawsink_create_default_window):
* sys/directdraw/gstdirectdrawsink.h:
* sys/directsound/gstdirectsoundsink.c:
Wait until the window is created before using it; guard unistd.h
includes with HAVE_UNISTD_H. (#366523)
* win32/vs8/libgstdirectdraw.vcproj:
* win32/vs8/libgstdirectsound.vcproj:
Update project files.
Original commit message from CVS:
Patch by: Fredrik Persson <frepe at broadband net>
* sys/v4l2/gstv4l2tuner.c:
* sys/v4l2/gstv4l2tuner.h:
Fix _set_channel(): remove useless g_object_notify() for "channel"
property that doesn't exist any longer and therefore now also
useless redirect (#338818).
Original commit message from CVS:
* sys/oss/gstosssink.c: (gst_oss_sink_prepare):
Some drivers do not support unsetting the non-blocking flag once the
device is opened. In those cases, close/open the device in
non-blocking mode. Fixes#362673.
Original commit message from CVS:
* sys/v4l2/v4l2_calls.c: (gst_v4l2_fill_lists):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_set_fps),
(gst_v4l2src_get_fps):
dear stefan, framespersecond is not frameperiod, reverting but adding
comment
Original commit message from CVS:
* sys/v4l2/v4l2_calls.c: (gst_v4l2_fill_lists):
* sys/v4l2/v4l2src_calls.c: (gst_v4l2src_set_fps),
(gst_v4l2src_get_fps):
Numerator is numerator and denominator is denominator. Say that aloud
5 times and retry after next beer.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
add build stuff for v4l2, needs --enable-experimental until
the last bits are resolved
Original commit message from CVS:
* sys/v4l2/gstv4l2object.c:
(gst_v4l2_object_install_properties_helper):
comment out the properties that are already part of the tuner
interface.
Original commit message from CVS:
* sys/v4l2/gstv4l2src.c: (gst_v4l2src_get_all_caps),
(gst_v4l2src_get_caps):
* sys/v4l2/v4l2_calls.c: (gst_v4l2_fill_lists):
Framerate can be 0/1 too.
Init framerate to 0/1 before querying it so that we can detect
devices that don't know about a framerate.
Add some more debugging info.