* Enhance debug log to print human readable D3D11_FORMAT_SUPPORT flags
value, instead of packed numeric flagset value.
* Only device supported format will be added to format table.
Depending on device feature level (i.e., D3D9 feature devices),
16bits formats will not be supported. Although there might be formats
we deinfed but not supported, it will not be a major issue in practice
since our D3D11 implementation does not support legacy devices already
(known limitation) and also old d3dvideosink will be promoted in that case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2441>
Output may attemp to set the width and height to zero values if
caps has no such information, which will cause capture get invalid
dimensions. Then decoder reports negotiation failure.
So need to set default resolution if caps has no such information.
Real values can be set again until source change event is signaled.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2400>
Now it uses the JPEG parser in libgstcodecparsers, while the whole
code is simplified by relying more in baseparser class for tag
handling.
The element now signals chroma-format and default framerate is 0/1,
which is for still-images.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1473>
While current and future LoongArch machines that are supposed to run
GStreamer all support unaligned accesses, there might be future
lower-end cores (e.g. the embedded product line) without such support,
and we may not want to penalize these use cases.
So, mark LoongArch as not supporting unaligned accesses for now, and
hope the compilers do a good job optimizing them. We can always flip
switch later.
Suggested-by: CHEN Tao <redeast_cn@outlook.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2443>
It is valid to have the padding set to 1 on the first packet and it
happens very often from TWCC packets coming from libwebrtc. This means
that we were totally ignoring many TWCC packets.
Fix test that checked that a first packet with padding was not valid and
instead test a single twcc packet with padding to check precisely what
this patch was about.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2422>
When processing the first event after probing the
file and being activated, requeue sticky events
as there's no requirement that demuxers send tag
and other events again after a seek - that's
why they're sticky.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2432>
- Consistently unref the chained buffer at the end of the chain
function, if we're not handing it off to `gst_pad_push`. This avoids a
few buffer leaks in the error paths in `_chain` and `_push_history`.
- When mapping the video frame fails, return a flow error instead of
crashing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2428>
If we just break the loop, we might run into the `gop != NULL` assert
that follows it. Rather, exit immediately with flushing flow.
Also use this flushing mechanism when we release a pad. This avoids
having an extra flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1030>
Background:
Whenever a caps event is received by appsink, the caps are stored in the
same internal queue as buffers. Only when enough buffers have been
popped from the queue to reach the caps, `priv->sample` gets its caps
updated to match, so that they are correct for the following buffers.
Note that as far as upstream elements are concerned, the caps of appsink
are updated immediately when the CAPS event is sent. Samples pulled from
appsink retain the old caps until a later buffer -- one that was sent by
upstream elements after the new caps -- is pulled.
The race condition:
When a flush is received, appsink clears the entire internal queue. The
caps of `priv->sample` are not updated as part of this process, and
instead remain as those of the sample that was last pulled by the user.
This leaves open a race condition where:
1. Upstream sends a new caps event, and possibly some buffers for the
new caps.
2. Upstream sends a flush (possibly from a different thread).
3. Upstream sends a new buffer for the new caps. Since as far as
upstream is concerned, appsink caps are the new caps already, no new
CAPS event is sent.
4. The appsink user pulls a sample, having not pulled before enough
samples to reach the buffers sent in step 1.
Bug: the pulled sample has the old caps instead of the new caps.
Fixing the race condition:
To avoid this problem, when a buffer is received after a flush,
`priv->sample`'s caps should be updated with the current caps before the
buffer is added to the internal queue.
Interestingly, before this patch, appsink already had code for this, in
gst_app_sink_render_common():
/* queue holding caps event might have been FLUSHed,
* but caps state still present in pad caps */
if (G_UNLIKELY (!priv->last_caps &&
gst_pad_has_current_caps (GST_BASE_SINK_PAD (psink)))) {
priv->last_caps = gst_pad_get_current_caps (GST_BASE_SINK_PAD (psink));
gst_sample_set_caps (priv->sample, priv->last_caps);
GST_DEBUG_OBJECT (appsink, "activating pad caps %" GST_PTR_FORMAT,
priv->last_caps);
}
This code assumes `priv->last_caps` is reset when a flush is received,
which makes sense, but unfortunately, there was no code in the flush
code path resetting it.
This patch adds such code, therefore fixing the race condition. A unit
test demonstrating the bug and testing its behavior with the fix has
also been added.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2413>
On windows, if you are not using built-in commands you need
to pass the full path of your executable into the subprocess.call/
Popen syscall. ex `c:/foo/bar/baz.exe`. This get's long and is
not ergonomic when you want to run trivial task like:
`gst-env.py ninja` or `gst-inspect0.0` or `gst-validate-launcher`
Instead, on windows, always launch a shell to be able to resolve
the executable from the PATH.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2397>
This transition is meant to be very similar to crossfade, but
instead of fading out the background video at the same time as the
foreground fades in, the background video stays at 100% opacity
during the whole transition.
This essentially "restores" the old crossfade behaviour that was changed in:
eb48faf342
but using a new type enum, so that both behaviours are available,
letting applications choose.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2385>
The timestamp in the tfdt refers to the first trun box and if there are
multiple trun boxes then the distance between the first timestamps will
grow.
At some point this distance reaches a threshold and triggers the
resetting of the first sample's timestamp of this trun box to be reset
to the tfdt.
This threshold is implemented for files where there is a jump in the
timeline between fragments and where this can be detected via a jump
between the end timestamp of the previous fragment and the tfdt of the
next. This behaviour is preserved.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2409>
NVIDIA GPUs have undocumented limitation regarding minimum resolution
and it can be queried via a NVDEC API. However, since we don't want to
bring CUDA/NVDEC API into D3D11, use hardcoded values for now
until we find a nice way for capability check.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2406>
