When adding an element to a bin we need to propagate the GstContext's
to/from the element.
This moves the GstContext list from GstBin to GstElement and adds
convenience functions to get the currently set list of GstContext's.
This does not deal with the collection of GstContext's propagated
using GST_CONTEXT_QUERY. Element subclasses are advised to call
gst_element_set_context if they need to propagate GstContext's
received from the context query.
https://bugzilla.gnome.org/show_bug.cgi?id=705579
A proxy-pad should always proxy the caps related queries
and events to its down or upstream peers on the other side
of the element. Falling back to a caps query seems wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=754112
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.
Also added unit tests.
gst_segment_position_from_stream_time() will convert stream time into a
position in the segment so that gst_segment_to_stream_time() with that
position returns the same stream time. It will return -1 if the stream time
given is not inside the segment.
When a running-time-offset is stored in the event, it could become smaller
than 0 although the event is otherwise correct. This can happen when pad
offsets are used.
To prevent this, we set the timestamp to -diff, so that in the end the sum of
both is exactly 0.
https://bugzilla.gnome.org/show_bug.cgi?id=754356
This fixes a race where a state change may return failure if it has
request pads that are deactivated and removed (and thus have no
parent) at the same time as the element changes state and (de)activates
its pads.
https://bugzilla.gnome.org/show_bug.cgi?id=755342
In some cases, probes might want to handle the buffer/event/query
themselves and stop the data from travelling further downstream.
While this was somewhat possible with buffer/events and using
GST_PROBE_DROP, it was not applicable to queries, and would result
in the query failing.
With this new GST_PROBE_HANDLED value, the buffer/event/query will
be considered as successfully handled, will not be pushed further
and the appropriate return value (TRUE or GST_FLOW_OK) will be returned
This also allows probes to return a non-default GstFlowReturn when dealing
with buffer push. This can be done by setting the
GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=748643
It will make the default accept-caps handler use the pad template
caps instead of the query-caps result to check if the caps is
acceptable. This is aligned with what the design docs says the
accept-caps should do (be non-recursive) and should be faster. It
is *not* enabled by default, though.
API: GST_PAD_FLAG_ACCEPT_TEMPLATE
API: GST_PAD_IS_ACCEPT_TEMPLATE
API: GST_PAD_SET_ACCEPT_TEMPLATE
API: GST_PAD_UNSET_ACCEPT_TEMPLATE
https://bugzilla.gnome.org/show_bug.cgi?id=753623
If no date and only a time is given in gst_date_time_new_from_iso8601_string(),
assume that it is "today" and try to parse the time-only string. "Today" is
assumed to be in the timezone provided by the user (if any), otherwise Z -
just like the behavior of the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=753455
Add methods to add/remove the providers that should be hidden by this
provider. Also make a method to get a list of hidden providers.
This makes it possible to have multiple systems monitor the same devices
and remove duplicates.
Add a property to see all devices, even duplicate ones from hidden
providers.
The previous implementation was doing a direct call to the peer pad,
which resulted in query probes never being called on the original pad.
Instead of that, get the peer pad caps by using gst_pad_peer_query()
which will call probes in the expected fashion.
While calling gst_value_deserialize_sample, if there is a failure
after caps is ref'ed, then caps is getting leaked. Hence checking for
caps in fail: goto condition and unref'ing it
https://bugzilla.gnome.org/show_bug.cgi?id=753338
When running gst_registry_scan_plugin_file we were losing the
information about the registry being loaded and ended up adding the
plugin to the default registry which was not correct.
https://bugzilla.gnome.org/show_bug.cgi?id=752662
In case there is an IDLE probe fired from gst_pad_push_data and it
doesn't return GST_FLOW_OK, the code jumps to the probe_stopped
label which tries to unref the data object. However, at this point
the data object belongs downstream and must not be touched.
By setting data = NULL, the code skips this unref.
https://bugzilla.gnome.org//show_bug.cgi?id=753151
Release the monitor lock when calling the provider start/stop methods.
Because we release the lock now, We need to make sure we check the
cookie again and keep track of started and removed providers.
The deviceproviders are added to the array sorted by their rank. Make
sure we keep this ordering when removing a provider.
We use _prepend to collect the devices, use g_list_reverse to get the
devices in the right order; sorted by rank and in the same order as
returned by the provider.
The check for the presence of the parent in the presence of
the NEED_PARENT flag was missing for the chain function. Also keep
a ref on the parent in case the pad is removed mid-chain.
Don't copy memory metas if we only copied part of the buffer, didn't
copy memories or merged memories. In all these cases the memory
structure has changed and the memory meta becomes meaningless.
https://bugzilla.gnome.org/show_bug.cgi?id=751712
Do not ignore the caps argument when requesting a pad by template.
This is particularly harmful when the pad caps query by default
returns ANY so it will match the first template instead of the
one that actually intersects with the caps.
https://bugzilla.gnome.org/show_bug.cgi?id=751235
A core meta which helps implement the old concept
of sub-buffering in some situations, by making it
possible for a buffer to keep a ref on a different
parent buffer. The parent buffer is unreffed when
the Meta is freed.
This meta is used to ensure that a buffer whose
memory is being shared to a child buffer isn't freed
and returned to a buffer pool until the memory
is.
https://bugzilla.gnome.org/show_bug.cgi?id=750039
This macro didn't work well as it relied on the sign on the last
divided number (number of days). This value is most of the time
zero, and zero is considered positive in printf. Instead, deal with
the sign manually, and resuse the original macros for the rest. This
actually simplify the macro a lot.
So from this point, the remaining warning for libgstreamer are about
protected member not showing in the doc. This may need some discussion
with upstream gtk-doc people.
* Remove % in from of none macro
* Fixed GST_TYPE_FAGS -> GST_TYPE_FAG_SET
* Minor wording fix
* Can't link to GstUri.port, so split the .port part
There was few Since: mark missing their column. Also unify the way
we set the Since mark on enum value and structure members. These
sadly don't show up in the index.
This tell GI if this function is for actions (call) or is the
answer of this method being asynchronous (async). In this case
it's a call. This also silence warning from the GI scanner.
Just like gst_buffer_add_meta() this function should also be
transfer none. This also silence a gi warning about returning
a copy of a non boxed bare structure.
It make no sense to allow using that. Any use would lead to leak
of crash. Note that GMiniObject is entirely unusable as you cannot
cast from let's say GstBuffer to GstMiniObject.
Add utility to print signed value of time. This is useful to
trace running time values in gint64 or GstClockTimeDiff values.
Additionally, define GST_CLOCK_STIME_NONE to indicate an invalid
signed time value and validation macro. New macros are:
GST_CLOCK_STIME_NONE
GST_CLOCK_STIME_IS_VALID
GST_STIME_FORMAT
GST_STIME_ARGS
https://bugzilla.gnome.org/show_bug.cgi?id=740575
Follow up of 7130230ddb
Provide the memory implementation the GstMapInfo that will be used to
map/unmap the memory. This allows the memory implementation to use
some scratch space in GstMapInfo to e.g. track different map/unmap
behaviour or store extra implementation defined data about the map
in use.
https://bugzilla.gnome.org/show_bug.cgi?id=750319
This overrides the default latency handling and configures the specified
latency instead of the minimum latency that was returned from the LATENCY
query.
https://bugzilla.gnome.org/show_bug.cgi?id=750782
gst_clock_wait_for_sync(), gst_clock_is_synced() and gst_clock_set_synced()
plus a signal to asynchronously wait for the clock to be synced.
This can be used by clocks to signal that they need initial synchronization
before they can report any time, and that this synchronization can also get
completely lost at some point. Network clocks, like the GStreamer
netclientclock, NTP or PTP clocks are examples for clocks where this is useful
to have as they can't report any time at all before they're synced.
https://bugzilla.gnome.org/show_bug.cgi?id=749391
There are gstmemory's available that operate in two memory domains
and need to ensure consistent access between these domains.
Imagine a scenario where e.g. the GLMemory is mapped twice in both
the GPU and the CPU domain. On unmap or a subsequent map, it would
like to ensure that the most recent data is available in the memory
domain requested. Either by flushing the writes and/or initiating a
DMA transfer. Without knowing which domain is being unmapped, the
memory does not know where the most recent data is to transfer to
the other memory domain.
Note: this still does not allow downgrading a memory map.
https://bugzilla.gnome.org/show_bug.cgi?id=750319
Now that locking exclusively dows not always succeed, we need to signal
the failure case from gst_memory_init.
Rather than introducing an API or funcionality change to gst_memory_init,
workaround by checking exclusivity in the calling code.
https://bugzilla.gnome.org/show_bug.cgi?id=750172
gst_memory_lock (mem, WRITE | EXCLUSIVE);
gst_memory_lock (mem, WRITE | EXCLUSIVE);
Succeeds when the part-miniobject.txt design doc suggests that this should fail:
"A gst_mini_object_lock() can fail when a WRITE lock is requested and
the exclusive counter is > 1. Indeed a GstMiniObject object with an
exclusive counter 1 is locked EXCLUSIVELY by at least 2 objects and is
therefore not writable."
https://bugzilla.gnome.org/show_bug.cgi?id=750172
DllMain should not be relied on for anything except storing the DLL handle.
It should also not be defined for static builds, but doing so is not
straightforward and is mostly harmless, so let's just add a comment about that
for now.
GstFlagSet is a new type designed for negotiating sets
of boolean capabilities flags, consisting of a 32-bit
flags bitfield and 32-bit mask field. The mask field
indicates which of the flags bits an element needs to have
as specific values, and which it doesn't care about.
This allows efficient negotiation of arrays of boolean
capabilities.
The standard serialisation format is FLAGS:MASK, with
flags and mask fields expressed in hexadecimal, however
GstFlagSet has a gst_register_flagset() function, which
associates a new GstFlagSet derived type with an existing
GFlags gtype. When serializing a GstFlagSet with an
associated set of GFlags, it also serializes a human-readable
form of the flags for easier debugging.
It is possible to parse a GFlags style serialisation of a
flagset, without the hex portion on the front. ie,
+flag1/flag2/flag3+flag4, to indicate that
flag1 & flag4 must be set, and flag2/flag3 must be unset,
and any other flags are don't-care.
https://bugzilla.gnome.org/show_bug.cgi?id=746373
The old gst_object_has_ancestor will call the new code. This establishes the
symetry with the new gst_object_has_as_parent.
API: gst_object_has_as_ancestor()
Ensure iterator is advanced. The current list iteration code only
advances the iterator (walk) if a match is found, which results
in an infinite loop when more than one entry exists in the list.
https://bugzilla.gnome.org/show_bug.cgi?id=748321
In order to support some types of protected streams (such as those
protected using DASH Common Encryption) some per-buffer information
needs to be passed between elements.
This commit adds a GstMeta type called GstProtectionMeta that allows
protection specific information to be added to a GstBuffer. An example
of its usage is qtdemux providing information to each output sample
that enables a downstream element to decrypt it.
This commit adds a utility function to select a supported protection
system from the installed Decryption elements found in the registry.
The gst_protection_select_system function that takes an array of
identifiers and searches the registry for a element of klass Decryptor that
supports one or more of the supplied identifiers. If multiple elements
are found, the one with the highest rank is selected.
This commit adds a unit test for the gst_protection_select_system
function that adds a fake Decryptor element to the registry and then
checks that it can correctly be selected by the utility function.
This commit adds a unit test for GstProtectionMeta that creates
GstProtectionMeta and adds & removes it from a buffer and performs some
simple reference count checks.
API: gst_buffer_add_protection_meta()
API: gst_buffer_get_protection_meta()
API: gst_protection_select_system()
API: gst_protection_meta_api_get_type()
API: gst_protection_meta_get_info()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
In order for a decrypter element to decrypt media protected using a
specific protection system, it first needs all the protection system
specific information necessary (E.g. information on how to acquire
the decryption keys) for that stream.
The GST_EVENT_PROTECTION defined in this commit enables this information
to be passed from elements that extract it (e.g. qtdemux, dashdemux) to
elements that use it (E.g. a decrypter element).
API: GST_EVENT_PROTECTION
API: gst_event_new_protection()
API: gst_event_parse_protection()
https://bugzilla.gnome.org/show_bug.cgi?id=705991
When idle probe runs directly from the gst_pad_add_probe() function
we need to make sure that no data flow happens as idle probe
is a blocking probe. The idle probe will prevent that any
buffer, bufferlist or serialized events and queries are not
flowing while it is running.
https://bugzilla.gnome.org/show_bug.cgi?id=747852
When a bin changes states upwards, and a child fails to change,
any child that was already switched will not be reset to its
original state, leaving its state inconsistent with the bin,
which does not change state due to the failure.
If the state change was from NULL to READY, it means that deleting
this bin will cause those children to be deleted while not in
NULL state, which is a Bad Thing. For other upward changes, it
is less of a problem, as a subsequent switch back to NULL will
cause an actual downwards change on those inconsistent elements,
albeit from the "wrong" state.
We now reset state to the original one when a child fails.
Includes unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=747610
An element that performs decryption does not naturally fit within any
of the existing element factory class types. It is useful to be able
to easily get a list of all elements that support decryption so that
a union can be computed between the protection systems that have a
supported decryptor and the allowed protection systems for a particular
stream.
This commit adds a new GST_ELEMENT_FACTORY_TYPE_DECRYPTOR and its
associated string identifier "Decryptor". It also adds
GST_ELEMENT_FACTORY_TYPE_DECRYPTOR to GST_ELEMENT_FACTORY_TYPE_DECODABLE
so that uridecodebin can auto-plug a decryption element.
https://bugzilla.gnome.org/show_bug.cgi?id=705991
Use case: we want to block the source pad of a leaky queue and
drop the buffer that causes the block. If we return PROBE_DROP
then the buffer gets dropped, but we get called again. If we
return PROBE_OK we can't easily drop the buffer. If we just
replace the item into the GstPadProbeInfo structure with NULL,
GStreamer will push a NULL buffer to the next element when we
unblock the pad probe. This patch ensures it doesn't do that.
https://bugzilla.gnome.org/show_bug.cgi?id=734342
Also skip gst_pipeline_get_clock() and gst_pipeline_set_clock() from the
bindings as they are confused with gst_element_*_clock().
API: gst_pipeline_get_pipeline_clock()
https://bugzilla.gnome.org/show_bug.cgi?id=744442
Only print interesting caps features, don't
append (memory:SystemMemory) to all caps,
which makes them much more unwieldy and
harder to read. Also use internal function
to get caps features so that our printing
has no side effects on the caps.
https://bugzilla.gnome.org/show_bug.cgi?id=746809
Don't unwrap strings that start but don't finish with a double quote. If a
string is delimited by two quotes we unescape them and any special characters
in the middle (like \" or \\). If the first character or the last character
aren't a quote we assume it's part of an unescaped string.
Moved some deserialize_string unit tests because we don't try to unwrap strings
missing that second quote anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=688625
