If we do, then multiple disjoint OpenGL contexts will not perform the
necessary download and reupload of data that is necessary to cross between
each OpenGL context sharegroup.
basedepayload generates its own segment in a pretty unconventional
manner, relying on information in the caps such as npt-start or
npt-stop, usually set by rtspsrc.
In ONVIF mode, rtspsrc will generate the correct segment and this
logic in rtpbasedepayload will not be needed, this commit allows
rtspsrc to signal that through the caps.
While we can convert between all formats apart from the rate, we
actually need to make sure that we comply with a) the rate of the first
configured pad and b) also all the allowed rates from downstream.
We were previously only fixating the rate in the getcaps
implementation when downstream was requiring a discrete value,
causing negotiation to fail when upstream was capable of rate
conversion, but not made aware that it had to occur.
Instead of fixating the rate, we can simply update our sink
template caps with whatever GValue the downstream caps are holding
as their rate field.
Allows negotiation to successfully complete with pipelines such as:
audiotestsrc ! audio/x-raw, rate=48000 ! audioresample ! audiomixer name=m ! \
audio/x-raw, rate={800, 1000} ! autoaudiosink \
audiotestsrc ! audio/x-raw, rate=44100 ! audioresample ! m.
... and also as known as ITU-T H.273.
The conversion has been handled per plugin for now. That causes
code duplication a lot also some plugins might not be updated with newly introduced
color{matrix,transfer,primaries} enum value(s).
Instead of handling it per plugin, centralized handling can remove such
code duplication and make plugins be up-to-dated.
The extmap attribute allows mapping RTP extension header IDs to
well-known RTP extension header specifications. See RFC8285 for details.
We store the extmap attribute either as string in the caps
extmap-X=extensionname
where X is the integer extension header ID, or as 3-tuple of strings
extmap-X=<direction,extensionname,extensionattributes>
where direction or extensionattributes are allowed to be the empty
string.
Both formats are allowed because usually only the extension name is
given and it's much simpler to handle in caps.
By suggesting possible detection too early, it's possible that
the wrong format is detected. Hold off making suggestions until one
of the following conditions is met:
* Probability > GST_TYPE_FIND_LIKELY
* At least MPEG_MIN_PROBE_LENGTH bytes have been examined
* EOS, in which case the best guess wins
Fixes#628
We use this property in gst_gl_display_egl_from_gl_display, to set
foreign_display for the new GstGLDisplayEGL instance. This fixes a
problem where gst_gl_display_egl_finalize calls EglTerminate on a
pre-existing EGL connection.
It seems that eglCreatePlatformWindowSurfaceEXT is failing (with
EGL_BAD_ALLOC) because it thinks an EGL surface has already been created
for the wl_egl_window. The reason is that the "driver_private" field of
the wl_egl_window is getting clobbered by the function
wl_proxy_set_queue().
Since a wl_egl_window is not a wl_proxy, it shouldn't be passed to
wl_proxy_set_queue(). It just wraps a wl_surface (which is a wl_proxy).
And it looks like the queue for that surface is getting set earlier on
in the function anyway.
See https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/issues/621#note_184582
Body_offset mean that so much data have been written.
Without this patch n_vectors somtimes becomes one more than it should
and then there will be an vector that have a random size causing
writev_bytes to cause a "Bad address" error.
This patch fixes the following critical warning:
CRITICAL **: 11:33:32.843: Unknown GL format 0x0 provided
It would happen during the setup of a second pipeline involving the DMABuf
uploader, typically with a v4l2src element. The warning was raised because the
uploader had a cached EGLImage already filled but the formats were not
synchronized accordingly.
The "field-order" is related for all interlace_mode modes except the
"progressive" mode. So instead of or'ing each mode we can use the
already supported GST_VIDEO_INFO_IS_INTERLACED macro.
This makes a pipeline below works:
little endian:
gst-launch-1.0 videotestsrc ! video/x-raw,format=P010_10LE ! glimagesink
big endian:
gst-launch-1.0 videotestsrc ! video/x-raw,format=P010_10BE ! glimagesink
gst_meta_api_type_register() assumes that the last tags element is null, but it wasn't
==17422==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7f4e2a67c998 at pc 0x7f4e2a0c92ac bp 0x7ffcc41f80b0 sp 0x7ffcc41f80a0
READ of size 8 at 0x7f4e2a67c998 thread T0
#0 0x7f4e2a0c92ab in gst_meta_api_type_register ../subprojects/gstreamer/gst/gstmeta.c:94
#1 0x7f4e2a5582c3 in gst_video_afd_meta_api_get_type ../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1146
#2 0x404c7c in invoke_get_type (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x404c7c)
#3 0x406b5c in dump_irepository (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x406b5c)
#4 0x407089 in main (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x407089)
#5 0x7f4e295b4b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
#6 0x404479 in _start (/home/ubuntu/gst-build/build/tmp-introspect5gv1rovo/GstVideo-1.0+0x404479)
0x7f4e2a67c998 is located 40 bytes to the left of global variable 'tags' defined in '../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1232:25' (0x7f4e2a67c9c0) of size 24
0x7f4e2a67c998 is located 0 bytes to the right of global variable 'tags' defined in '../subprojects/gst-plugins-base/gst-libs/gst/video/video-anc.c:1141:25' (0x7f4e2a67c980) of size 24
SUMMARY: AddressSanitizer: global-buffer-overflow ../subprojects/gstreamer/gst/gstmeta.c:94 in gst_meta_api_type_register
The blend functions for alpha formats need to do more work than just
doing a memcpy, so we can do a memcpy when we know that a blend is not
actually needed.
1080p AYUV ! compositor background=transparent ! fakesink - 56% faster
Specifically, when we don't draw the background and the first pad we
draw completely covers the output frame, we can just copy it as-is.
The rest of the pads (if any) will get composited on top normally.
Add max-reorder property to make the old hard coded reordering limit of
100 configurable. It's particularly useful in some scenarios to set
max-reorder=0 to disable the behavior that the depayloader will drop
packets.
Note that although the default value is 100, the default limit has
increased with one because of the changed if-test. This was done to
allow the max-reorder value to be more intuitive. See tests.
If the background is transparent and obscured by a pad that may or may
not have alpha, we can still skip drawing it entirely
AYUV 1080p ! compositor background=transparent ! fakesink - 75% faster
We don't need to waste time drawing the background when one of the
pads completely covers the output and there's no alpha on the pad or
in the video format. Speedups:
I420 1080p ! compositor ! fakesink - 72% faster
I420 1080p ! compositor background=black ! fakesink - 45% faster
