Commit graph

167 commits

Author SHA1 Message Date
Tim-Philipp Müller
dec3aa55e9 audioconvert, audioresample, audiofilter: fix divide by 0 for input buffer without caps
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink

would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
2022-11-26 08:47:49 +00:00
Edward Hervey
3a63eab2fa uridecodebin3: propagate about-to-finish for new inputs
If the pending next urisourcebin is already draining, make sure we propagate it
when activating it.

Fixes gapless playback of small entries

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1588

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:22 +00:00
Edward Hervey
def2515ae2 uridecodebin3: Remove old fixme
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:22 +00:00
Edward Hervey
734a4554f3 (uri)decodebin3: Ensure group-id consistency
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.

This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
353691602e uridecodebin3: Fix shutdown procedures in probe
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
7f5f7b3a77 decodebin3: Properly reset when going back to READY
Clear the remaining stream-related fields when going from PAUSED to READY, and
use when disposing.

Fixes various issues when re-using decodebin3/playbin3

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
d12534d21d decodebin3: Don't output bogus GST_MESSAGE_STREAMS_SELECTED
When `is_selection_done` is called, it checks that all the requested streams are
present in the active stream list ...

... except there could very well be a (about to be removed) stream from the
previous selection present.

Therefore filter the list of streams we add to the message by the streams which
are actually requested.

Fixes issues when switching between different stream types (ex: video-only to
audio-only).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
1774d5c87a parsebin: Don't leak parsepad list on shutdown
Free it as it is down in other cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3443>
2022-11-21 19:02:44 +00:00
Nicolas Dufresne
5980fb76e7 video: Add arbitrary tile dimensions support
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.

In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
2022-11-18 22:59:29 +00:00
Edward Hervey
db2146d0ea decodebin2: Minor debug fix for decodepad
decodedad might have their name changed when exposing, causing a race when
trying to get their name without taking a lock. Just use GST_PTR_POINTER in
debug statements instead

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3428>
2022-11-18 07:22:23 +00:00
Edward Hervey
92abb8daec urisourcebin: Remove un-needed define
This code hasn't use GValueArray in ages

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
5702568a7e urisourcebin: Use a non-buffering multiqueue for non-streamable URI
Even though buffering is not required, we need to ensure we are dealing with the
interleave (if any) before pushing the elementary streams further downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
c59397354c urisourcebin: Minor doc fix
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Jan Schmidt
6e549b2fe5 uridecodebin3: Don't leak EOS event
Make sure to unref the EOS event in all code paths
when returning GST_PAD_PROBE_HANDLED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
6bffbe283a playbin3: Move gapless to uridecodebin3
This was the intention from the start, just took me a few years *cough* to
actually implement it properly.

Gapless is handled by re-using as much as possible the same decoders and sinks
if present, and only pre-rolling switching at the sources level (with buffering
if/when needed).

In order to enable "gapless" playback, the "next" uri should be set at any time
between the moment the `about-to-finish` signal is emitted and the moment the
current play item is done. Previously this could only be done with the signal
emission.

This new implementation also allows "Instantaneous URI switching". This allows a
much faster way of switching playback entries while re-using as many elements as
possible. To enable this set `instant-uri` property to TRUE, the default being
FALSE.

API: instant-uri properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
1f2d98028b playbin3: Remove unused code
This was never used, and if ever it's needed at some point for reference it's
available in gstplaybin.c

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
78e43a6319 decodebin3: Clear input collection when linked again
The previous collection no longer applies to this input

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
8ce0a23a5e decodebin3: Improve collection merging
If the collections are the same, don't merge them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
0bb2026890 decodebin3: doc cleanup
Remove old/invalid FIXME and cleanup some logs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
4bfbc72663 decodebin3: Remove unused variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f785b3d584 decodebin3: Allow re-using inputs
DecodebinInput (and their backing parsebin or identity) are no longer released
when the corresponding sinkpad is unlinked, but when it's released.

The parsebin element will be resetted:
* If incoming caps are incompatible (was the case before)
* Or when unlinking and it was previously pull-based

This opens the way to use decodebin3 with changing inputs (i.e. gapless)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
1f8d8b2df6 uridecodebin3: use urisourcebin parse-streams property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
412c4cbca3 urisourcebin: Improve buffering handling
Introduce the option to have the streams be parsed with `parsebin` for
compatible sources (i.e. which are eligible for buffering in the same way as
before this commit).

By parsing the inputs directly, this allows more accurate buffering control:
* Instead of relying on potential bitrate information coming from somewhere
* and *without* being linked downstream

If `parse-streams` is activated and the stream is eligible for buffering, then a
`multiqueue` will be used on the output of `parsebin` in order to handle the
buffering.

API: `parse-streams`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
fa4a70d7fe parsebin: avoid bogus processing
If a parsebin pad is already exposed, don't try to rename it or cause extra
processing which isn't needed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
5e2606cacd decodebin3: Avoid parsebin usage if not needed
If the incoming streams are already parsed, there is no need to add yet-another
parsebin to process it *IF* that stream is compatible with a decoder or the
decodebin3 output caps.

This only applies if all the following conditions are met:
* The incoming stream can *NOT* do pull-based scheduling
* The incoming stream provides a `GstStream` and `GstStreamCollection`
* The caps are compatible with either the decodebin3 output caps or a decoder
  input

If all those conditions are met, a identity element is used instead of a
parsebin element and the same code paths are taken.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f010dce6e7 decodebin3: DecodebinInputStream: Hold a ref to srcpad
And move the locking outside of the input stream creation function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e8f768212c urisourcebin: Bring high-watermark level in sync with legacy values
It was always 60%. For some reason this crept in during the initial urisourcebin
refactoring.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
b589cf12f2 decodebin3: Don't leak collection when releasing inputs
And refactor the function slightly for clarity

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e276d3c836 decodebin3: Protect input freeing with the input lock
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f091d2445f decodebin3: Refactor parsebin output handling
* Instead of creating temporary `PendingPad` structures, always create a
  DecodebinInputStream for every pad of parsebin
* Remove never used `pending_stream` field from DecodebinInputStream
* When unblocking a given DecodebinInput (i.e. wrapping a parsebin), also make
  sure that other parsebins from the same GstStreamCollection are unblocked
  since they come from the same source

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
d14c14dcc4 decodebin3: Store GstStreamCollection from upstream
If upstream provides stream collection, use/store them as soon as possible

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
64d775a44f urisourcebin: Move adaptive demuxer handling into ChildSrcPadInfo
It's part of that chain of elements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
a5f0085cda urisourcebin: Only remove components in PAUSED->READY
With the refactoring, we are guaranteed the components are only created in PAUSED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
5b41ea2fe8 urisourcebin: Refactor ChildSrcPadInfo and OutputSlot usage
Make an explicit topology/tree of structures:
* ChildSrcPadInfo is created for each source element source pad
* ChildSrcPadInfo contains the chain of optional elements specific to that
  pad (ex: typefind)
* A ChildSrcPadInfo links to one or more OutputSlot, which contain what is
  specific to the output (i.e. optional buffering and ghostpad)
* No longer use GObject {set|get}_data() functions to store those structures and
  instead make them explicit
* Pass those structures around explicitely in each function/callback

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f42ca96ad9 urisourcebin: Remove duplicate call
We ensure sources are removed in PAUSED->READY->NULL. No need to call it when
creating the source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
64c81b6972 urisourcebin: Remove pending pad handling
This was needed to support the legacy handling of changing streams (add new
pads, send EOS and remove old pads).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
b6584defd0 urisourcebin: Only expose pads once activation has completed
The following problem could happen:
* Thread 1 : urisourcebin gets activated from READY->PAUSED
* Thread 2 : some element causes a pad to be added to urisourcebin , which gets
linked downstream, which decides to activate upstream to pull-based.
  * That requires "activating" the pads from PUSH to NONE, and then from NONE to PULL
* Thread 1 : the base class state change handlers checks if all pads are
activated

The issue is that since going form PUSH to PULL requires going through NONE,
there is a window during which:
* Thread 1 : The pad was set to NONE (before being set to PULL)
* Thread 2 : The base class activates that pad (to PUSH)
* Thread 1 : The attempt to "activate" to PULL fails (silently or not)

This is very racy, so in order to avoid that, we make sure that we only add pads
once the transition from READY->PAUSED in the parent classes is done.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
a347846698 urisourcebin: Only allow streams-aware adaptive demuxer
We no longer want to deal with elements that use the old-style of stream
switching and instead expose/remove streams as they appear/disappear

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e7eb9271ee urisourcebin: Simplify initial information collection
When iterating existing pads of a source, directly handle them:
* Raw pads are handled directly
* Pads without caps are connected to a typefind
* Other pads are handled via `handle_new_pad()`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
80770fe0ec urisourcebin: Use iterator function where applicable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
41617834d2 urisourcebin: Document and rename fields
Removes ambiguity when reading the code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
c8b9a7d640 urisourcebin: Remove unused lock/list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
638633dea3 urisourcebin: Check for live source when generating element
Instead of at a later stage

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e8f9e17744 urisourcebin: Streamline demuxer removal
And since remove_source also removes the dmeuxer, we no longer need to call it
in addition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
577febc29e urisourcebin: Clarify function name and arguments
* The "need_queue" variable is only used in one place, move it there
* Clarify the fact the function also exposes raw_pads

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
586ec1a672 urisourcebin: Error out if a source doesn't expose pads
Looks like this fell through the cracks. If a source element doesn't have
dynamic pads and doesn't provide any source pad ... we should properly error
out.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
eebb794a4f streamsynchronizer: Don't leak the syncstream object
It was leaked when breaking out early when handling GST_EVENT_STREAM_START

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-12 12:24:21 +01:00
Edward Hervey
c00da50c61 encodebasebin: Don't leak muxer pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-12 10:33:51 +01:00
Nicolas Dufresne
b57135e09c rawvideoparse: Fix support for sub-sampled tile
This element was missed as it does not use the new helpers to calculate the
plane size. The code is relatively simple though, so adding support for
subsample tiles was easy enough.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3385>
2022-11-11 11:02:15 +00:00
Talha Khan
6c8b7204e5 videoconvert, videoscaleconvert: fix element description
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3362>
2022-11-08 16:51:58 +00:00