Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block):
* ext/wavpack/gstwavpackenc.h:
Put the write helpers into the GstWavpackEnc struct directly and not
as a pointer to save two small, but useless mallocs. This also makes
it possible to drop the finalize method.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_push_buffer):
For consistency reasons also set GST_BUFFER_OFFSET_END on the outgoing
buffers the same way wavpackenc does it.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Don't use gst_pad_alloc_buffer() as we might clip the buffer later and
BaseTransform-based elements will likely break because of wrong
unit-size. Also plug a possible memleak that happens when decoding
fails for some reason.
Original commit message from CVS:
Based on patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_unref_connection):
Don't need to take the connection lock, it will not be used and could
cause deadlocks.
Original commit message from CVS:
* sys/osxvideo/osxvideosink.m:
Emit 'have-ns-view' message when working in embedded mode. The message
will contain a pointer to the newly created NSView.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code),
(collect_packets), (set_par_from_dar), (set_fps_from_code),
(mpeg_util_parse_extension_packet), (mpeg_util_parse_sequence_hdr),
(mpeg_util_parse_picture_hdr):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c:
(mpegvideoparse_handle_sequence), (mpegvideoparse_handle_picture),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
Move the MPEG specific byte parsing into the mpegpacketiser code.
Add parsing of picture types, that just feeds into a debug message
for now.
Fix some 64-bit format strings.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_init):
A 10 band EQ should be initialized to 1 bands and not to 3.
Original commit message from CVS:
* configure.ac:
* gst/mpeg1videoparse/Makefile.am:
* gst/mpeg1videoparse/gstmp1videoparse.c:
* gst/mpeg1videoparse/gstmp1videoparse.h:
* gst/mpeg1videoparse/mp1videoparse.vcproj:
* gst/mpegvideoparse/Makefile.am:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_packetiser_init),
(mpeg_packetiser_free), (mpeg_packetiser_add_buf),
(mpeg_packetiser_flush), (mpeg_find_start_code),
(get_next_free_block), (complete_current_block),
(append_to_current_block), (start_new_block), (handle_packet),
(collect_packets), (mpeg_packetiser_handle_eos),
(mpeg_packetiser_get_block), (mpeg_packetiser_next_block):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c: (mpegvideoparse_get_type),
(gst_mpegvideoparse_base_init), (gst_mpegvideoparse_class_init),
(mpv_parse_reset), (gst_mpegvideoparse_init),
(gst_mpegvideoparse_dispose), (set_par_from_dar),
(set_fps_from_code), (mpegvideoparse_parse_seq),
(gst_mpegvideoparse_time_code), (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state),
(plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
* gst/mpegvideoparse/mpegvideoparse.vcproj:
Port mpeg1videoparse to 0.10 and give it rank SECONDARY-1, so
that it's below existing decoders.
Rename it to mpegvideoparse to reflect that it handles MPEG-1 and
MPEG-2 now.
Re-write the parsing code so that it collects packets differently
and timestamps Picture packets correctly.
Add a list of FIXME's at the top.
Original commit message from CVS:
* tests/icles/equalizer-test.c: (equalizer_set_band_value),
(equalizer_set_all_band_values),
(equalizer_set_band_value_and_wait),
(equalizer_set_all_band_values_and_wait), (do_slider_fiddling),
(main):
Port the example to new equalizer api.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix leaks when running a NSApp.
Accept any kind of resolutions.
Works in fullscreen. Can maximize.
Only thing left before being able to move this to -good is documentation
and embedded window support.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Handle display mode changes during playback.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (_do_init),
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init),
(gst_iir_equalizer_band_get_type),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_finalize), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_setup), (plugin_init):
* gst/equalizer/gstiirequalizer.h:
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_base_init),
(gst_iir_equalizer_nbands_class_init),
(gst_iir_equalizer_nbands_init),
(gst_iir_equalizer_nbands_set_property),
(gst_iir_equalizer_nbands_get_property):
* gst/equalizer/gstiirequalizernbands.h:
Refactor plugin into a base class and a first subclass (nband eq). The
nband eq uses GstChildProxy and is controlable. More subclasses will
follow.
Original commit message from CVS:
Includes patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/Makefile.am:
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_client_init),
(jack_process_cb), (jack_sample_rate_cb), (jack_buffer_size_cb),
(jack_shutdown_cb), (connection_find),
(gst_jack_audio_make_connection), (gst_jack_audio_get_connection),
(gst_jack_audio_unref_connection),
(gst_jack_audio_connection_add_client),
(gst_jack_audio_connection_remove_client),
(gst_jack_audio_client_new), (gst_jack_audio_client_free),
(gst_jack_audio_client_get_client),
(gst_jack_audio_client_set_active):
* ext/jack/gstjackaudioclient.h:
Make an object to manage client connections to the jack server which we
will use in the future to run selected jack elements with the same jack
connection.
Make some stuff a bit more threadsafe.
Activate the jack client ASAP.
* ext/jack/gstjackaudiosink.c:
(gst_jack_audio_sink_allocate_channels),
(gst_jack_audio_sink_free_channels), (jack_process_cb),
(gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_close_device),
(gst_jack_ring_buffer_acquire), (gst_jack_ring_buffer_release),
(gst_jack_audio_sink_class_init), (gst_jack_audio_sink_init),
(gst_jack_audio_sink_getcaps):
* ext/jack/gstjackaudiosink.h:
Use new client object to manage connections.
Don't remove and recreate all ports, try to reuse them.
Original commit message from CVS:
* ext/wavpack/gstwavpack.c: (plugin_init):
* ext/wavpack/gstwavpackcommon.c:
Use a general wavpack debug category for common code.
* ext/wavpack/gstwavpackstreamreader.c:
(gst_wavpack_stream_reader_set_pos_abs),
(gst_wavpack_stream_reader_set_pos_rel),
(gst_wavpack_stream_reader_write_bytes):
Use the general wavpack debug category here too and add debug
output to the functions that should not be called at all by
the wavpack library.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_plugin_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Change debugging category names to conform to the conventions.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c:
* gst/qtdemux/qtdemux.h:
Share qtdemux debug category across all files, otherwise all debugging
in files other than qtdemux.c would end up in the default category.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_start),
(gst_spectrum_event), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
One FIXME less, by resolving message timestamps against the playback
segment.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_set_property),
(gst_spectrum_transform_ip):
Fix and cleanup default property values.
Add FIXMEs for stuff that looks rather wrong.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (message_handler):
* gst/spectrum/demo-osssrc.c: (message_handler):
Remove two obsolete and confusing comments.
Original commit message from CVS:
* ext/nas/nassink.c: (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_getcaps),
(gst_nas_sink_unprepare):
Some more cleanups/changes; use boilerplate macro.
Original commit message from CVS:
* ext/nas/Makefile.am:
* ext/nas/README:
* ext/nas/nassink.c: (gst_nas_sink_get_type),
(gst_nas_sink_base_init), (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_finalize),
(gst_nas_sink_getcaps), (gst_nas_sink_prepare),
(gst_nas_sink_unprepare), (gst_nas_sink_delay),
(gst_nas_sink_reset), (gst_nas_sink_write),
(gst_nas_sink_set_property), (gst_nas_sink_get_property),
(gst_nas_sink_open), (gst_nas_sink_close), (NAS_flush),
(NAS_sendData), (NAS_EventHandler), (gst_nas_sink_sink_get_format),
(NAS_createFlow), (plugin_init):
* ext/nas/nassink.h:
Bunch of nassink clean-ups: make build by adding the right CFLAGS
and LIBS to Makefile.am; rename structure, macros and functions
according to canonical naming scheme; move some things around a bit;
use GST_CAT_DEFAULT instead of GST_CAT_* everywhere; remove README
file that didn't really contain any useful information anyway (the
useful bits have been moved into the 'host' property description).
Original commit message from CVS:
* gst-libs/gst/app/Makefile.am:
* gst-libs/gst/app/gstappbuffer.c:
* gst-libs/gst/app/gstappbuffer.h:
* gst-libs/gst/app/gstappsrc.c:
Add GstAppBuffer that includes a callback and closure for
proper handling of data chunks.
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_init), (gst_dtsdec_sink_event):
A few small clean-ups.
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
More debug output for failure cases.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame),
(gst_dtsdec_change_state):
Don't do forced downmixing to stereo, but check what downstream
can do and let libdts do the downmixing based on that (#400555).
Original commit message from CVS:
Patch by: Lutz Mueller <lutz topfrose de>
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_init), (gst_neonhttp_src_set_property),
(gst_neonhttp_src_set_uri), (gst_neonhttp_src_set_proxy),
(gst_neonhttp_src_send_request_and_redirect),
(gst_neonhttp_src_uri_set_uri):
* ext/neon/gstneonhttpsrc.h:
Simplify _set_uri() and _set_proxy() and remove the unused ishttp
member (#388050).
* tests/check/elements/neonhttpsrc.c: (GST_START_TEST):
Fix bogus URI to something that actually exists, otherwise we just
bypass the test (and also to something that doesn't redirect, since
neonhttpsrc doesn't seem to handle this very gracefully yet)
Original commit message from CVS:
* tests/check/Makefile.am:
Draw plugins in from the build tree sys/ dir, rather than
picking up the already installed versions.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Disable the cocoa event loop since it's a huge memory leak. Should only
matter if the sink isn't used within an NSApp (which has already got
a coca event loop).
Remove all unused code.
Original commit message from CVS:
* configure.ac:
* gst/app/Makefile.am:
* gst/app/gstapp.c:
* gst/app/gstappsrc.c:
* gst/app/gstappsrc.h:
Add a new plugin/library to make it easy for apps to shove
data into a pipeline.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_init):
* gst/real/gstrealvideodec.c: (gst_real_video_dec_init):
Use gst_pad_use_fixed_caps() on source pads, to avoid negotiation
errors in certain situations (e.g. dec ! cs ! ximagesink and the
imagesink window is resized); also, some minor clean-ups.
Original commit message from CVS:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove include of unused headers.
* sys/waveform/gstwaveformplugin.c:
* sys/waveform/gstwaveformsink.c:
* sys/waveform/gstwaveformsink.h:
* win32/vs6/libgstwaveform.dsp:
Add a new waveform plugin which includes an audio sink
element using the WaveForm win32 API.
* win32/MANIFEST:
Add the new project file form waveform plugin.
Original commit message from CVS:
* sys/directdraw/gstdirectdrawplugin.c:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Prepare the plugin to move to good:
Remove unused/untested code (rendering to an extern surface,
yuv format rendering).Use GST_(DEBUG/*)_OBJECT macros
Rename all functions from gst_directdrawsink to gst_directdraw_sink.
Add gtk doc section
Fix a bug in gst_directdraw_sink_show_frame, memcpy line by line
respecting destination surface stride.
* sys/directsound/gstdirectsoundplugin.c:
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Prepare the plugin to move to good:
Rename all functions from gst_directsoundsink to gst_directsound_sink.
Add gtk doc section
* win32/common/config.h.in:
* win32/MANIFEST:
Add config.h.in
Original commit message from CVS:
* configure.ac:
* docs/plugins/Makefile.am:
Add crossreferences to glib/gobject/gstream docs. Also fix typo in
timidity.cfg check.
* ext/timidity/gsttimidity.c: (plugin_init):
Also build if no config was detected at configure time.
Original commit message from CVS:
* Makefile.am:
Add win32 MANIFEST
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Clear unused code and add comments.
Remove yuv from template caps, it only supports RGB
actually.
Implement XOverlay interface and remove window and fullscreen
properties.
Add debug logs.
Test for blit capabilities to return only the current colorspace if
the hardware can't blit for one colorspace to another.
* sys/directsound/gstdirectsoundsink.c:
Add some debugs.
* win32/MANIFEST:
Add VS7 project files and solution.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectdraw.dsp:
* win32/vs6/libgstdirectsound.dsp:
* win32/vs6/libgstqtdemux.dsp:
Update project files.
Original commit message from CVS:
* configure.ac:
Tell the code which faad it is, so that we can adjust the hacks
needed.
* ext/faad/gstfaad.c:
Make our hacks dependent on the fadd lib in use.
Original commit message from CVS:
* ext/amrwb/gstamrwbparse.c: (gst_amrwbparse_query):
GST_PAD_PARENT doesn't return a GstObject with an incremented refcount.
Switched to using gst_pad_get_parent().
Original commit message from CVS:
* configure.ac:
Increase required libsndfile version to a version that's known to
have the function sf_write_sync() to make the build bots happy.
Original commit message from CVS:
2007-02-05 Andy Wingo <wingo@pobox.com>
* ext/sndfile/Makefile.am:
* ext/sndfile/gstsfsrc.h:
* ext/sndfile/gstsfsrc.c: Port sfsrc to 0.10, pull or push, with
random access woo.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_class_init),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace):
Rename "values" property to "band-values" and change type into a
GValueArray, so it's more easily bindable and the range of the
values passed in is defined and checked etc.; also do some
locking.
Original commit message from CVS:
2007-02-02 Andy Wingo <wingo@pobox.com>
* configure.ac:
* ext/Makefile.am
* ext/sndfile/Makefile.am:
* ext/sndfile/gstsf.c:
* ext/sndfile/gstsf.h:
* ext/sndfile/gstsfsink.c:
* ext/sndfile/gstsfsink.h: Port sfsink to 0.10. Works in pull or
push mode with interleaved float or int data.
Original commit message from CVS:
* ext/alsaspdif/alsaspdifsink.c: (plugin_init):
Set rank to NONE so that it doesn't get autoplugged by autoaudiosink
(which didn't happen previously because the klass string didn't
contain anything autoaudiosink was looking for).
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
Fix a off by one that leads to the duration reported as one
sample less than it is
Original commit message from CVS:
* configure.ac:
Check for an Objective C compiler
* sys/Makefile.am:
* sys/osxvideo/Makefile.am:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Port of osxvideo plugin to 0.10. Do NOT consider 100% stable !
Fixes#402470
Original commit message from CVS:
* gst/videocrop/gstvideocrop.c:
(gst_video_crop_get_image_details_from_caps),
(gst_video_crop_transform_packed_complex):
Fix cropping for packed 4:2:2 formats YUYV/YUY2 and UYVY.
* tests/icles/videocrop-test.c: (check_bus_for_errors),
(test_with_caps), (main):
Block streaming thread before changing filter caps while the
pipeline is running so that we don't get random not-negotiated
errors just because GStreamer can't handle that yet.
Original commit message from CVS:
* ext/ladspa/Makefile.am:
* ext/ladspa/gstladspa.c: (gst_ladspa_class_get_param_spec):
add GstController support to ladspa
Original commit message from CVS:
Patch by: Rosfran Borges <rosfran dot borges at idnt org br>
* ext/mythtv/gstmythtvsrc.c: (gst_mythtv_src_start),
(gst_mythtv_src_next_program_chain):
Remove sleep calls, they've been moved into the library now ...
(#354451).
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query):
Fix the SEEKING query. We can seek if we are in pull mode, not the
other way around. Also set the correct format in the seeking query and
handle the case where the headers are not read yet and we can't say
anything about our seeking capabilities.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Fix spelling in 2 places: It's called Wavpack, not WavePack.
Original commit message from CVS:
* gst/multifile/gstmultifilesink.c:
(gst_multi_file_sink_class_init):
* gst/multifile/gstmultifilesrc.c: (gst_multi_file_src_class_init):
* gst/mve/gstmvedemux.c: (gst_mve_video_create_buffer),
(gst_mve_video_palette), (gst_mve_video_code_map),
(gst_mve_audio_init), (gst_mve_audio_data), (gst_mve_timer_create),
(gst_mve_demux_chain):
* gst/mve/gstmvemux.c: (gst_mve_mux_push_chunk):
* gst/mve/mveaudioenc.c: (mve_compress_audio):
* gst/mve/mvevideodec16.c: (ipvideo_copy_block):
* gst/mve/mvevideodec8.c: (ipvideo_copy_block):
* gst/mve/mvevideoenc16.c: (mve_encode_frame16):
* gst/mve/mvevideoenc8.c: (mve_encode_frame8):
Use proper print statements.
Fixes build on mac os x.
<wingo> oo look at me my name is edward i'm hacking on macos wooo
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/deinterleave.c (gst_deinterleave_add_new_pads):
Use fixed caps on src pads.
(gst_deinterleave_remove_pads): Remove src pads, not sink pads. I
seem to have reverse midas disease!
(gst_deinterleave_process): Proxy timestamps, offsets, durations,
and set caps on outgoing buffers. Fixes#395597, I think.
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/interleave/interleave.c (gst_interleave_init): Init the
activation mode properly.
(gst_interleave_src_setcaps, gst_interleave_src_getcaps)
(gst_interleave_init): Set a setcaps and getcaps function on the
src pad, so that we can implement pull-mode negotiation.
(gst_interleave_sink_setcaps): Renamed from
gst_interleave_setcaps, as it only does the sink logic now.
Implement both for pull-mode and push-mode.
(gst_interleave_process): Set caps on our outgoing buffer.
(gst_interleave_src_activate_pull): Fix some more bogus casts.
What is up with this.
Original commit message from CVS:
* ext/mythtv/gstmythtvsrc.c: (do_read_request_response),
(gst_mythtv_src_create), (gst_mythtv_src_get_position),
(gst_mythtv_src_do_seek), (gst_mythtv_src_start),
(gst_mythtv_src_next_program_chain), (gst_mythtv_src_get_size),
(gst_mythtv_src_handle_event), (gst_mythtv_src_handle_query),
(gst_mythtv_src_change_state), (gst_mythtv_src_set_property),
(gst_mythtv_src_uri_get_type):
Clean up a bit, mostly the debug statements; fix deadlock in
_set_property() in the error cases; fix up query function.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_fixate)
(gst_signal_processor_ouija_caps, gst_signal_processor_prepare):
Remove fixate/ouija stuff, thankfully, due to the new
part-negotiation.txt pull-mode negotiation scheme.
(gst_signal_processor_setcaps_pull)
(gst_signal_processor_setcaps): Implement upstream set_caps pull
proxying for pull mode. Now this works: ladspa-sine-fcac !
audioconvert ! alsasink.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type):
Minor clean-up: use enum values instead of hardcoded constants (#395536).
Original commit message from CVS:
* gst/mve/gstmvedemux.c: (gst_mve_demux_get_src_query_types),
(gst_mve_demux_handle_src_query), (gst_mve_demux_handle_src_event),
(gst_mve_add_stream):
Support SEEKING query (bad news now delivered properly!); add event
function to source pads to make sure seeks aren't propagated
upstream, even if they aren't handled.
Original commit message from CVS:
2007-01-07 Andy Wingo <wingo@pobox.com>
* configure.ac:
* gst/interleave/Makefile.am:
* gst/interleave/plugin.h:
* gst/interleave/plugin.c:
* gst/interleave/interleave.c:
* gst/interleave/deinterleave.c: New elements interleave and
deinterleave, implement channel interleaving and deinterleaving.
The interleaver can operate in pull or push mode but the
deinterleaver is more like a demuxer and can only operate in push
mode.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c
(gst_signal_processor_ouija_caps): Move around in the source
file...
(gst_signal_processor_prepare, gst_signal_processor_do_pulls):
Call ouija_caps in prepare() instead of do_pulls(), a bit earlier.
This allows us to have caps when we do the pad_alloc_buffer().
(gst_pad_alloc_buffer_and_set_caps): Use self->caps instead of the
pad caps, which might not be set yet.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c:
(gst_signal_processor_add_pad_from_template)
(gst_signal_processor_fixate): Add a fixate function, to assist in
pathological ladspa-sine-fcac ! fakesink can-activate-pull=true
cases.
(gst_signal_processor_prepare, gst_signal_processor_process): Add
nframes args so that getrange can tell ladspa how many frames to
process.
(gst_signal_processor_ouija_caps): setcaps needs to be called
before processing, which normally happens when chaining a buffer
to a pad. However in getrange mode with no sinks we need to check
explicitly for this condition, guess some caps to use, and use
those to setcaps(). Hence this mystical function.
(gst_signal_processor_do_pulls): Pull in bytes, not samples.
Divine the caps if necessary.
(gst_signal_processor_getrange): Interpret the length as bytes,
not samples.
(gst_signal_processor_chain): nframes=G_MAXUINT, will be limited
by incoming buffer sizes.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_finalize):
Don't call the RAFreeDecoder since it randomly causes segfaults.
* gst/real/gstrealaudiodec.h:
indent properly.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz@topfrose.de>
* gst/real/Makefile.am:
* gst/real/gstreal.c: (plugin_init):
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_chain),
(gst_real_audio_dec_setcaps), (gst_real_audio_dec_init),
(gst_real_audio_dec_base_init), (gst_real_audio_dec_change_state),
(gst_real_audio_dec_finalize), (gst_real_audio_dec_set_property),
(gst_real_audio_dec_get_property), (gst_real_audio_dec_class_init):
* gst/real/gstrealaudiodec.h:
Added RealAudio wrapper elementfactory.
Modified structures so it can also work on x86_64 using the
adequate .so .
Original commit message from CVS:
* configure.ac:
* gst/qtdemux/Makefile.am:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_moov):
Check for zlib and if available pass it explicitly to the linker
when linking qtdemux. If not available (or --disable-external has
been specified!), disable the bits in qtdemux that use it. Fixes
build on MingW (#392856).
Original commit message from CVS:
* configure.ac:
Real video .so are now also available for x86_64, so we can build the
Real plugin on i386 AND x86_64.
* gst/real/Makefile.am:
* gst/real/gstreal.c: (plugin_init):
New plugin file for real .so wrapper plugins.
* gst/real/gstrealvideodec.c: (gst_real_video_dec_alloc_buffer),
(gst_real_video_dec_decode), (gst_real_video_dec_chain),
(gst_real_video_dec_activate_push), (gst_real_video_dec_setcaps),
(open_library), (close_library), (gst_real_video_dec_init),
(gst_real_video_dec_base_init), (gst_real_video_dec_finalize),
(gst_real_video_dec_set_property),
(gst_real_video_dec_get_property), (gst_real_video_dec_class_init):
* gst/real/gstrealvideodec.h:
Moved RealVideo element to separate file
Cleaned up code some more.
Make it work on x86_64.
Try several possible locations for .so
Separate opening/closing libraries in separate functions.
Original commit message from CVS:
* tests/icles/videocrop-test.c: (main):
Call g_thread_init() right at the beginning. Remove superfluous
gst_init() - we've already been inited via the GOption stuff.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directsound/Makefile.am:
* sys/directsound/gstdirectsoundsink.c:
(gst_directsoundsink_reset):
Add directsoundsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392638). Also simplify DirectDraw check a bit.
* tests/check/elements/.cvsignore:
Fix CVS ignore for neonhttpsrc test binary.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* configure.ac:
* sys/Makefile.am:
* sys/directdraw/Makefile.am:
Add directdrawsink to build and dist it, so it gets built when
compiling with MingW on win32 and the required headers and libraries
are available (fixes: #392313).
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_center_rect), (gst_directdrawsink_show_frame),
(gst_directdrawsink_setup_ddraw),
(gst_directdrawsink_surface_create):
Comment out some unused things and fix some printf format issues in
order to avoid warnings when buildling with MingW (#392313).
Original commit message from CVS:
* tests/check/elements/videocrop.c: (GST_START_TEST),
(videocrop_test_cropping_init_context):
When we can't create an element needed for the test, print a message
detailing which element it actually is that's missing (#390673).
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_post_progress),
(gst_qtdemux_chain):
Don't post BUFFERING messages in streaming mode if the stream
headers are behind the movie data; instead, post "progress" element
messages as a temporary solution. Apps might get confused and do
silly things to the pipeline state if they see buffering messages
from different sources and don't realize they come from different
sources (#387160).
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/ladspa/*:
Move LADPSA plugin from -good for the release, as it's not quite
ready to be enabled by default in the -good module yet.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_chain),
(gst_qtdemux_add_stream):
Don't output g_warning for an unsupported format, just send a
GST_ELEMENT_WARNING and don't add the pad.
Fix the case where it doesn't check for a NULL pad in streaming mode.
Fixes#387137
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak):
Fix crash dereferencing NULL pointer if there's no stco atom.
Fixes#387122.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.h:
Use local copy of md5.h, as it disappeared in recent wavpack
installs.
Patch by: Sebastian Dröge <slomo at ubuntu dot com>
Fixes: #387076
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_src_query_types),
(gst_qtdemux_handle_src_query), (gst_qtdemux_handle_src_event):
We don't support seeking in streaming mode, so don't even try.
Implement seeking query so apps can query seekability properly
(see #365414). Fix duration query.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Add AMR-WB to the list of supported formats.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_create),
(send_request_and_redirect):
Fix minor mem leak in redirect code.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/neonhttpsrc.c: (handoff_cb),
(GST_START_TEST), (neonhttpsrc_suite):
* tests/check/gst-plugins-bad.supp:
Add super-basic unit test for #384140.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_create),
(send_request_and_redirect):
Set offset on buffers pushed out (id3demux gets confused if the
first buffer does not have an offset of 0). Fixes#384140.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_create), (send_request_and_redirect),
(gst_neonhttp_src_start), (oom_callback):
Minor clean-ups; remove newlines at end of debug statements.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_parse_tree):
Fix non-working redirects from inetfilm.com (handle 'alis' reference
data type as well). Fixes#378613.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin wh9 net>).
* gst/modplug/gstmodplug.cc:
Fix modplug duration query. Fixes#384294.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler de>
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Fix caps for 24 bit raw PCM audio (2).
Fixes#383471.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak),
(qtdemux_video_caps):
Handle more H263 variants.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler de>
* gst/replaygain/gstrganalysis.c: (gst_rg_analysis_event):
Call the base class handler. Fixes#380610.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak):
Remove some asserts and replace them with a proper error
message. Fixes#379261.
Original commit message from CVS:
* ext/theora/theoradec.c: (theora_dec_src_query),
(theora_dec_src_event), (theora_handle_data_packet),
(theora_dec_chain):
Send events on the right pads, since they don't work very well if
you send them in the wrong direction.
Original commit message from CVS:
2006-11-17 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_tune):
Actually set the TONE parameter for DVB-S when we should.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_trak):
Don't parse extra sample params for raw pcm. Fixes#374914.
Original commit message from CVS:
* configure.ac:
* gst/videoparse/Makefile.am:
* gst/videoparse/gstvideoparse.c:
A little pluggy to make sense out of the random chunks we get
from multifilesrc.
Original commit message from CVS:
* gst/multifilesink/Makefile.am:
* gst/multifilesink/gstmultifilesink.c:
* gst/multifilesink/gstmultifilesink.h:
* gst/multifilesink/multifilesink.vcproj:
Remove the old one.
Original commit message from CVS:
2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property)
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune), (gst_dvbsrc_set_pes_filters):
Rename set_pes_filter to set_pes_filters for consistency.
Do run-time pid filtering.
Original commit message from CVS:
2006-11-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device):
Do not call output_frontend_stats from a method that does not
have the gstdvbsrc object.
This fixes the build, sorry guys!
Original commit message from CVS:
2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_output_frontend_stats), (gst_dvbsrc_tune),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
Force PAT to always be in the filter.
Try to continue reading after failing 10 times.
Original commit message from CVS:
* po/POTFILES.in:
add dvbsrc
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_class_init), (gst_dvbsrc_init),
(gst_dvbsrc_set_property), (gst_dvbsrc_get_property),
(gst_dvbsrc_open_frontend), (gst_dvbsrc_open_dvr),
(gst_dvbsrc_finalize), (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_start), (gst_dvbsrc_frontend_status),
(gst_dvbsrc_tune), (gst_dvbsrc_unset_pes_filters),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
adapter-prefix is a terrible name for a device, so replace it.
strerror should be used immediately after the syscall related to it.
Actually throw a reasonable GST_ELEMENT_ERROR if we fail to open
(pretty easy to trigger by opening the same device twice).
Use _OBJECT macros where it makes sense.
This element is going to need some work before it moves.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
Patch by: Sergey Scobich <sergey dot scobich at gmail com>
* sys/directdraw/gstdirectdrawsink.c:
(gst_directdrawsink_window_thread),
(gst_directdrawsink_create_default_window):
* sys/directdraw/gstdirectdrawsink.h:
* sys/directsound/gstdirectsoundsink.c:
Wait until the window is created before using it; guard unistd.h
includes with HAVE_UNISTD_H. (#366523)
* win32/vs8/libgstdirectdraw.vcproj:
* win32/vs8/libgstdirectsound.vcproj:
Update project files.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (gst_qtdemux_get_duration),
(gst_qtdemux_handle_src_query), (qtdemux_parse_tree),
(qtdemux_parse_trak):
Handle unbounded length streams a bit better. Fixes#367696.
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame):
Fix flow handling and buffer refcounting (gst_pad_push() takes
ownership of the buffer passed to it, the buffer does not have
to be unreffed no matter what flow value gst_pad_push() returns).
Original commit message from CVS:
* configure.ac:
* gst/multifilesink/Makefile.am:
* gst/multifilesink/gstmultifilesink.c:
* gst/multifilesink/gstmultifilesink.h:
I copied over filesink a while ago and modified it to work
as multifilesink. Might as well check it in. This could
use some work before being declared useful.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
Patch by: Josep Torra Valles <josep at fluendo com>
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(next_entry_size), (qtdemux_inflate), (qtdemux_parse_moov),
(qtdemux_parse_tree), (qtdemux_parse_trak), (qtdemux_tag_add_str),
(qtdemux_tag_add_num), (qtdemux_tag_add_date),
(qtdemux_tag_add_gnre):
Make compile with Forte compiler, mostly don't do pointer arithmetic
with void pointers (#362626).
Original commit message from CVS:
Patch by: Josep Torra Valles <josep at fluendo com>
* gst/nsf/fds_snd.c:
* gst/nsf/mmc5_snd.c:
* gst/nsf/nsf.c:
* gst/nsf/vrc7_snd.c:
* gst/nsf/vrcvisnd.c:
Fix some things the Forte compiler warns about (#362626).
Original commit message from CVS:
* configure.ac:
* gst/deinterlace/Makefile.am:
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_base_init),
(gst_deinterlace_class_init), (gst_deinterlace_init),
(gst_deinterlace_stop), (gst_deinterlace_transform_caps),
(gst_deinterlace_set_caps), (gst_deinterlace_transform_ip),
(gst_deinterlace_set_property), (gst_deinterlace_get_property):
* gst/deinterlace/gstdeinterlace.h:
Port simple deinterlacer from 0.8. Use at your own risk, don't blame
me for anything it does or does not do to your precious pictures.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (extract_initial_length_and_fourcc),
(gst_qtdemux_loop_state_header):
Printf format fixes.
* sys/dvb/gstdvbsrc.c:
Use "_stdint.h".
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/Makefile.am:
* sys/dvb/dvb-api/Makefile.am:
* sys/dvb/dvb-api/audio.h:
* sys/dvb/dvb-api/ca.h:
* sys/dvb/dvb-api/dmx.h:
* sys/dvb/dvb-api/frontend.h:
* sys/dvb/dvb-api/net.h:
* sys/dvb/dvb-api/osd.h:
* sys/dvb/dvb-api/version.h:
* sys/dvb/dvb-api/video.h:
Remove these files, not needed use system files.
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property),
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune):
Fix warnings, uint16_t etc. is in stdint.h.
Use system includes not our local ones.
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
* sys/Makefile.am:
Add dvb detection and allow dvbsrc to be built.
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_setcaps), (gst_faad_chain),
(gst_faad_close_decoder):
Some cleanups.
Added some more debugging.
Don't ever ignore unlinked, we're not a demuxer.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_add_stream):
Activate pad before adding it to the element.
Original commit message from CVS:
* ext/theora/theoradec.c: (gst_theoradec_reset),
(theora_get_query_types), (theora_dec_src_query),
(theora_dec_src_event), (theora_dec_sink_event),
(theora_handle_comment_packet), (theora_handle_type_packet),
(theora_handle_header_packet), (clip_buffer), (theora_dec_push),
(theora_handle_422_image), (theora_handle_420_image),
(theora_handle_data_packet), (theora_dec_chain),
(theora_dec_change_state):
* ext/theora/theoradec.h:
Port lots of changes from theoradec to theoraexpdec.
This catches this plugin up to theoradec. Note that duplicate frames
are broken in theoradec at the moment.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_init),
(gst_spectrum_transform_ip):
Removed cruft code that was just commented out. Removed some obsolete
debug logs statements.
Original commit message from CVS:
* tests/icles/.cvsignore:
* tests/icles/Makefile.am:
* tests/icles/videocrop-test.c: (quit_mainloop), (tick_cb),
(test_with_caps), (video_crop_get_test_caps), (main):
Visual test for videocrop, shows that packed yuv doesn't work right
yet. --with-ffmpegcolorspace option doesn't work yet for unknown
reasons (another basetransform issue?)
