Commit graph

3977 commits

Author SHA1 Message Date
He Junyan
8defcf9b72 libde265dec: Only decode the main profile
The src caps of the libde265 is now fixed to I420, and so if the
stream is other format, such as 4:4:4 or 10 bits format, the pipeline
will crash because the dowstream element accesses the video buffer as
I420 format.
We now restrain the input caps to "main" profile, which only contains
4:2:0 8 bits stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5596>
2023-11-04 18:04:56 +00:00
Marek Vasut
a0755e5d74 v4l2codecs: Avoid QBUF/DQBUF struct timeval .tv_usec wrap-around at frame 1000000
When decoding stream using hardware V4L2 decoder element, in any of the
currently supported formats, the decoding will fail once frame number
1000000 is reached. The reported error clearly indicates a wrap-around
occured, instead of receiving decoded frame 1000000, frame 0 is received
from the hardware V4L2 decoder driver.

The problem is actually not in the driver itself, but rather in gstreamer,
which uses `struct v4l2_buffer` member `.timestamp` in a special way. The
timestamp of buffers with encoded data added to the SINK (input) queue of
the driver is copied by the driver into matching buffers with decoded data
added to the SOURCE (output) queue of the driver. In fact, the timestamp
is not a timestamp at all, but rather in this special case, only part of
it is used as an incrementing frame counter.

The `.timestamp` is of type `struct timeval`, which is defined in
`sys/time.h` [1]. Only the `tv_usec` member of this structure is used
for the incrementing frame counter. However, suseconds_t tv_usec [2]
may be limited to range [-1, 1000000]:
"
[XSI] The type suseconds_t shall be a signed integer type capable of
      storing values at least in the range [-1, 1000000].
"
Therefore, once frame 1000000 is reached, a rollover occurs and decoding
fails.

Fix this by using both `struct timeval` members, `.tv_sec` and `.tv_usec`
with matching modular arithmetic, this way the failure would occur again
just short of 2^84 frames, which should be plenty.

[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_time.h.html
[2] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_types.h.html

A test case using stateless hardware h264 decoder, the WARN/ERROR output
in gstreamer log indicates a failure occurred. With this change, that
error no longer occurs and the WARN/ERROR are not present:
```
pc$ gst-launch-1.0 videotestsrc num-buffers=1001001 pattern=6 ! \
                   video/x-raw,width=16,height=16,format=I420 ! \
                   x264enc ! filesink location=/tmp/test.h264

dut$ GST_DEBUG="*:3" gst-launch-1.0 filesrc location=/tmp/test.h264 ! \
                                    h264parse ! v4l2slh264dec ! fakesink
...
0:03:51.393677606 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000000, but driver returned frame 0.
0:03:51.394140597 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000001, but driver returned frame 1.
0:03:51.394425216 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000002, but driver returned frame 2.
0:03:51.394665211 12111     0x370df400 WARN      \
  v4l2codecs-decoder gstv4l2decoder.c:1157:gst_v4l2_request_set_done:<v4l2decoder2> \
  Requested frame 1000003, but driver returned frame 3.
0:03:51.394785833 12111     0x370df400 WARN      \
  v4l2codecs-h264dec gstv4l2codech264dec.c:1059:gst_v4l2_codec_h264_dec_output_picture:<v4l2slh264dec0> \
  error: Failed to decode frame 1000000
ERROR: from element /GstPipeline:pipeline0/v4l2slh264dec:v4l2slh264dec0: Failed to decode frame 1000000
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5603>
2023-11-04 16:59:51 +00:00
Kalev Lember
f44f36482c openh264: Fail gracefully if openh264 encoder/decoder creation fails
This can happen with the dummy "noopenh264" library that the freedesktop
flatpak runtime ships, and Fedora is planning on shipping as well. In
both cases the dummy implementation gets replaced with the actual
openh264 library that's downloaded directly from Cisco, but just to be
on safe side, this patch makes it careful to check the return values to
avoid crashing if the underlying library hasn't been swapped out yet.

The patch is taken from freedesktop-sdk and was originally written by
Valentin David <valentin.david@codethink.co.uk>.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5586>
2023-11-01 17:10:01 +00:00
Seungha Yang
cb6955944f wasapi2: Don't use global volume control object
ISimpleAudioVolume controls volume of corresponding audio session
and there would be only single input/output audio session
in case of share-mode, which means that it controls audio volume of the
process. Instead, use IAudioStreamVolume interface which controls
volume of the stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5579>
2023-10-31 10:23:24 +00:00
Seungha Yang
1a5a965846 d3d11videosink: Fix window switching in case of fullscreen mode
Other Windows applications allow window switching even when
an application window is in fullscreen mode. Also fixing
regression introduced in 15248d8b84
which makes restored window is always located at topmost
since we do not call SetWindowPos() anymore when restoring

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5578>
2023-10-30 22:51:15 +00:00
Seungha Yang
7171849c3e d3d11screencapturesrc: Fix mouse cursor blending
Ignore alpha component of source (mouse cursor texture)
when blending alpha channel, otherwise the background area of source
(which has zeros) will be written to render target. Then it will result
in black rectangle if output texture is converted to premultiplied alpha
texture

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5577>
2023-10-30 14:03:49 +00:00
Tim-Philipp Müller
96326904f9 pngenc: mark output frames as I-frames
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5564>
2023-10-27 18:58:29 +00:00
Tim-Philipp Müller
567e3b3d22 pngenc: output one frame only in snapshot mode
In snapshot mode pngenc should output exactly one frame
and then return FLOW_EOS to upstream. If upstream sends
more input frames before shutting down, it should keep
returning FLOW_EOS but not output any more encoded frames.

After a flushing seek it should output frames again though.

Fixes #3069.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5564>
2023-10-27 18:58:29 +00:00
Philippe Normand
b3a413b41d debugutils: Ensure we always expose a bin_to_dot_data implementation
Fixes a linking issue when building with `-Dgst_debug=false`.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5563>
2023-10-27 18:06:51 +00:00
Seungha Yang
738e274fab mfvideoencoder: Fix typo in template caps
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3058
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5556>
2023-10-26 00:40:56 +01:00
Sebastian Dröge
229b727017 aggregator: Allow passing unparented pads to gst_aggregator_pad_is_inactive()
It's very difficult to ensure that a pad is still child of the
aggregator during aggregation, so simply consider unparented pads as
inactive instead of asserting.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5553>
2023-10-25 14:58:06 +01:00
Sebastian Dröge
16e7f08597 aggregator: Also release clipped buffer when releasing an aggregator pad
Instead of waiting until the pad is actually finalized.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5553>
2023-10-25 14:58:06 +01:00
Sebastian Dröge
0596d637e2 aggregator: Take pad lock while releasing buffers when removing pads
Accessing the buffers in all other places requires the pad lock and not
taking it here can cause access to already freed buffers if there's
concurrent access from another thread.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5553>
2023-10-25 14:58:06 +01:00
Sebastian Dröge
8419c1e6dc audioaggregator: Make access to the pad list thread-safe while mixing
When mixing every single buffer the object lock is shortly released and
acquired again. In the meantime the pad list can become invalid because
a pad was removed or added, and equally the current pad might as well
have been finalized in the meantime.

To get around that, take a snapshot of all sinkpads before mixing and
work with that list of pads.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3052

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5553>
2023-10-25 14:58:06 +01:00
Jan Schmidt
970eb963c7 glfiter: Protect GstGLContext access
The propose and decide allocation vfuncs are called directly from
basetransform and need to use the locked accessor function for
retrieving a reliable reference to the GstGLContext (if available)

Fixes spurious crashes on shutdown during pad reconfiguration

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5518>
2023-10-20 11:02:02 +01:00
Jan Alexander Steffens (heftig)
4299be47ab tsmux: Fix default get_es_descrs_func
`tsmux_stream_default_get_es_descrs` is missing the `user_data`
parameter and shouldn't be cast to `TsMuxStreamGetESDescriptorsFunc`.

Prefer not casting at all to make sure we don't miss such an issue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
da02db0d95 tsmux: Fix default new_stream_func
`tsmux_stream_new` is missing the `user_data` parameter and shouldn't be
cast to `TsMuxNewStreamFunc`.

Prefer not casting at all to make sure we don't miss such an issue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
2d938d37a6 tsmux: Add missing include
We need `GstMpegtsPMTStream` here.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
77429e4096 tsmux: Simplify tsmux_section_write_packet
- Don't try to make the parameters match `GHFunc`. Use a dedicated
  callback for `g_hash_table_foreach`.
- Don't try to be clever with buffer memories. We're allocating a full
  packet anyway, might as well memcpy and save on a lot of complexity.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
c205086f2b tsmux: tsmux_packet_out should always consume its buffer
Consuming the buffer only when successful is an antipattern and easily
leads to leaks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
6198c4b8a1 tsmux: Don't memset in pad_stream when writing a PCR packet
tsmux_write_ts_header will write a stuffing adaptation field, so we
don't need to prefill the buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
4e9cb5d8eb tsmux: Move out parameters of tsmux_write_ts_header
Move them to the end of the parameter list and also allow passing NULLs
to ignore the payload information, but assert that the payload length is
zero in this case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Jan Alexander Steffens (heftig)
a65035ac25 tsmux: Fix two more uses of gst_buffer_map
The buffers should be used for writing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5516>
2023-10-20 08:53:19 +00:00
Matthias Fuchs
7c49ce1c21 qmlglsrc: sync on the streaming thread
After rendering a QML scene the qmlglsrc element copies the contents of
the scene to a GStreamer buffer. This happens on the Qt render thread.
Then it attaches a sync point to the destination buffer. This sync point
must be awaited by other threads which use the buffer later on. The
current implementation relies on the downstream elements to wait for the
sync point. However, there are situation where this does not work. The
GstBaseTransform e.g. copies the buffer metadata (which overwrites the
sync point without waiting for it) *before* waiting for the sync point.

This commit waits for the sync point inside the qmlglsrc element before
sending it downstream. The wait command is issued on the streaming
thread with the pipeline OpenGL context, i.e. it will synchronize with
the GStreamer OpenGL thread.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5515>
2023-10-20 00:36:26 +00:00
Jan Alexander Steffens (heftig)
61c62919a7 tsmux: Fix error handling in pad_stream
Don't leak the map or the buffer if we encounter an error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5513>
2023-10-19 23:22:33 +01:00
Jan Alexander Steffens (heftig)
5e78ef7a10 tsmux: Fill padding packets with stuffing bytes
Instead of leaving it uncleared, emitting probably old packet data but
potentially also random or sensitive application data.

Also fix the mapping mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5513>
2023-10-19 23:22:33 +01:00
Nicolas Dufresne
a92050493a v4l2codecs: h265: Fix entry_point_offsets array leak
This array was being leaked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5503>
2023-10-18 00:17:54 +00:00
Detlev Casanova
99435dc499 codecs: h265: Do not free slice header before using it
The v4l2codecs H.265 decoder uses the
GstH265SliceHdr::entry_point_offset_minus1 array so make sure that it is not
freed before decoding the frame.

Before this patch, some H.265 input would segfault in
gst_v4l2_codec_h265_dec_fill_slice_params() when executing the line:

guint32 entry_point_offset = slice_hdr->entry_point_offset_minus1[i] + 1;

Make sure that the array is not freed before using it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5503>
2023-10-18 00:17:54 +00:00
Doug Nazar
b2c7e8549c rtspclientsink: Don't leak previous server_ip
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5502>
2023-10-17 20:19:00 +01:00
Rahul T R
a7bc4ff3bb kmssink: Add TIDSS auto-detection
Add Texas Instruments TIDSS display controller into list of
auto-detected modules.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5486>
2023-10-15 23:17:29 +00:00
Stéphane Cerveau
87292c6026 imagesequencesrc: fix regular image deadlock
With one regular image file path provided (without %05d),
the element was stuck in a dead loop counting the frames:

gst_image_sequence_src_count_frames

This allows to display any image file out of the element
for a given number of buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5487>
2023-10-15 19:00:36 +01:00
Seungha Yang
3b3649353c d3d11converter: Fix 10/12bits planar output
Simple division can result in 10/12bits overflow.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5484>
2023-10-15 20:31:06 +09:00
Seungha Yang
4b932ee989 d3d11videosink: Fix rendering with initial fullscreen state
Change fullscreen mode once the swapchain is fully configured

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5466>
2023-10-12 00:24:58 +00:00
Seungha Yang
07a2f7ebcc d3d11videosink: Fix toggling between fullscreen and maximized
Use GetWindowPlacement() and SetWindowPlacement() APIs
to remember and restore window status, such as maximized, position,
restore position, etc.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3016
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5466>
2023-10-12 00:24:58 +00:00
Guillaume Desmottes
81178eab42 flvmux: set the src segment position as running time
We were already converting the pad last timestamp to running time but
not the segment position.
This segment position is used by gst_aggregator_simple_get_next_time()
to compute the waiting time when aggregating.

Those waiting times were wrong in my live pipeline using the system
clock, resulting in the aggregator to never wait at all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5465>
2023-10-12 00:28:50 +01:00
Nicolas Dufresne
f223ea076d v4l2: Fix tiled formats stride conversion
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.

  gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5463>
2023-10-11 16:48:51 +01:00
Nicolas Dufresne
c63e56fe63 v4l2codecs: Fix tiled formats stride conversion
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.

  gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5463>
2023-10-11 16:48:50 +01:00
Piotr Brzeziński
b5ca7eba4e glfilter: Only add parent meta if inbuf != outbuf
This was causing a memory leak in cases like `gltestsrc ! gltransformation scale-x=0.5 ! glimagesink`.
Parent meta was being added in assumption that those buffers are different, which was not the case here,
creating a reference loop and never freeing the buffer.

Co-authored-by: Matthew Waters <matthew@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5453>
2023-10-10 10:13:15 +01:00
Seungha Yang
019430949c decklink: Fix broken COM string conversion
WideCharToMultiByte return is the string length without null terminate
character if passed "cchWideChar" does not include the null terminate
character size. Instead of passing the exact string length, pass -1 so that
the API can understand the input string is null terminated already and
returned value from the API includes the character.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3023
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5446>
2023-10-09 15:34:44 +01:00
James Oliver
51e6209d1c nvh265encoder: fix bounds for auto-select GPU enumeration
Fixes the bounds-check for encoder auto-select GPU enumeration to be
between 0-7 instead of 0-6. This should allow 8-GPU machines to work
with nvautogpuh265enc for the last enumerated GPU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5439>
2023-10-05 12:20:17 +01:00
James Oliver
23aa3907f5 nvh264encoder: fix bounds for auto-select GPU enumeration
Fixes the bounds-check for encoder auto-select GPU enumeration to be
between 0-7 instead of 0-6. This should allow 8-GPU machines to work
with nvautogpuh264enc for the last enumerated GPU.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5439>
2023-10-05 12:20:17 +01:00
Sebastian Dröge
10d42caef2 flacenc: Correctly handle up to 255 cue entries
The counter was using a signed 8 bit integer, which was overflowing
after 127 entries. That was then passed as an unsigned 32 bit integer to
libflac, which caused it to be converted to a huge unsigned number.
That then caused an invalid memory access inside libflac.

As a bonus, signed integer overflow is undefined behaviour.

Instead, use an unsigned 8 bit integer. Once this overflows the existing
code already catches it and stops adding the cue. While FLAC__metadata_object_cuesheet_insert_track()
takes an unsigned 32 bit integer for the track number, FLAC__StreamMetadata_CueSheet_Track is
limiting it to an unsigned 8 bit integer.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2921

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5436>
2023-10-04 19:06:33 +01:00
Philippe Normand
4311de2be0 interaudiosink: Ensure adapters don't store buffers with audio meta
The interaudiosrc might take buffers of different sizes from the audio adapter,
so keeping metas consistency would be an issue. So the sink now strips the audio
metas away and the src adds them back (for non-interleaved layouts only) when
taking buffers from the adapter.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5416>
2023-09-28 15:14:38 +02:00
Philippe Normand
acd4202bc0 interaudiosrc: Add audio meta to buffers containing non-interleaved samples
Without this a downstream audioconverter wouldn't be able to map the
GstAudioBuffer prior to conversion.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5416>
2023-09-28 15:14:38 +02:00
Florian Zwoch
80d62798c3 adaptivedemux2: Call GTasks's return functions for blocking tasks
Gio/Task states the following:

If a GTask has been constructed and its callback set, it is an error to
not call g_task_return_*() on it. GLib will warn at runtime if this
happens (since 2.76).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5414>
2023-09-28 12:04:11 +02:00
Albert Sjölund
c53376cbfc souphttpsrc: Chain finalize call to parent
GstSoupSession finalize does not chain parent finalize,
causing it to leak memory, shown under g freeze notify.
In finalize method, ensure all branches call to parent
finalize.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5402>
2023-09-27 11:27:02 +00:00
Seungha Yang
c7f7c8e346 d3d11decoder: Fix crash on negotiate() when decoder is not configured
The negotiate() can be called by GstVideoDecoder baseclass on GAP event,
and decoder helper object might not be configured at the time
when negotiate() is called.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5401>
2023-09-27 12:29:34 +02:00
Hou Qi
ca2f7a4254 v4l2videodec: Correctly free caps to avoid memory leak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5388>
2023-09-25 14:57:09 +02:00
Eric
c7eed33e22 rtspconnection: Ignore trailing whitespace in headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5382>
2023-09-22 14:31:38 +00:00
Michiel Westerbeek
b5f72d930b video-scaler, audio-resampler: downgrade 'can't find exact taps' to debug
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5381>
2023-09-22 15:47:39 +02:00
Tim-Philipp Müller
0cccb1c9a6 Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5371>
2023-09-20 19:41:00 +01:00
Tim-Philipp Müller
ddb4fbe431 Release 1.22.6 2023-09-20 18:10:57 +01:00
Sebastian Dröge
1edd1c38dc mxfdemux: Check number of channels for AES3 audio
Only up to 8 channels are allowed and using a higher number would cause
integer overflows when copying the data, and lead to out of bound
writes.

Also check that each buffer is at least 4 bytes long to avoid another
overflow.

Fixes ZDI-CAN-21661, CVE-2023-40475

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2897

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5365>
2023-09-20 15:14:27 +01:00
Sebastian Dröge
f73fc41f2c mxfdemux: Fix integer overflow causing out of bounds writes when handling invalid uncompressed video
Check ahead of time when parsing the track information whether
width, height and bpp are valid and usable without overflows.

Fixes ZDI-CAN-21660, CVE-2023-40474

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2896

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5365>
2023-09-20 15:14:27 +01:00
Nicolas Dufresne
fddda16622 h265parser: Fix possible overflow using max_sub_layers_minus1
This fixes a possible overflow that can be triggered by an invalid value of
max_sub_layers_minus1 being set in the bitstream. The bitstream uses 3 bits,
but the allowed range is 0 to 6 only.

Fixes ZDI-CAN-21768, CVE-2023-40476

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2895

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5366>
2023-09-20 11:19:06 +01:00
Hugues Fruchet
9394979d67 waylandsink: Fix cropping for video with non-square aspect ratio
Padding of unaligned content is still visible at right with some aspect-ratio.
Fix this by giving the original content resolution to wp_viewport_set_source()
instead of pixel aspect ratio scaled one.

Fixes !5259

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5360>
2023-09-20 01:32:29 +01:00
Olivier Blin
ea2e829452 pulsedeviceprovider: fix incorrect usage of GST_ELEMENT_ERROR
The provider is not a GStreamer element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5354>
2023-09-19 14:09:46 +01:00
Seungha Yang
0f18fe67be h264decoder: Update latency dynamically
The actual number of reorder frames is unknown
unless frame reordering is disabled
(e.g., POC type 2 or constrained-* profiles).
Also derived maximum DPB size or max_num_reorder_frames in VUI
is not the upper bound of output delay.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2702
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5341>
2023-09-19 09:55:47 +00:00
L. E. Segovia
ffa307e614 applemedia: Also fix inconsistent pixel format definition for NV12
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5203>
2023-09-18 19:42:22 +00:00
L. E. Segovia
6cfb9b7c85 applemedia: Fix pixel format for I420
In Intel Macs, using full range 8-bit 4:2:0 YCbCr results in a failure on
initialization. I've validated this to be the correct pixel format with FFmpeg:

8653dcaf7d/libavutil/hwcontext_videotoolbox.c (L45)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5203>
2023-09-18 19:42:22 +00:00
Víctor Manuel Jáquez Leal
6efc79f5b6 va: Fix in error logs functions mismatches
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5340>
2023-09-16 17:57:33 +01:00
Matthew Waters
eef2348743 androidmedia/enc: handle codec-data before popping GstVideoCodecFrames
Issue is that when amc was producing a codec-data buffer, a
GstVideoCodecFrame was being popped off the internal queue.  This meant
that the codec-data was being associated with the first input frame and
the second (first encoded buffer) output buffer with the second input
frame.  At the end (assuming one input produces one output which seems
to hold in my testing and how the encoder is currently implemented)
there would be an input frame missing and would be pushed without any
timing information.  This would lead to e.g. muxers rejecting the buffer
without PTS and failing to mux.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5335>
2023-09-16 01:40:17 +00:00
Matthew Waters
790e480c7f androidmedia/enc: add fixme log about partial frames
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5335>
2023-09-16 01:40:17 +00:00
Seungha Yang
737057c27a av1parser: Fix segmentation params update
Even if the segmentation feature value is not updated,
the parsed "segmentation_update_map" and "segmentation_temporal_update"
values should not be cleared as it's referenced during lower
level bitstream parsing. Also, don't use assert() in parser
unless it's clearly impossible condition.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5336>
2023-09-16 01:37:26 +01:00
Jan Alexander Steffens (heftig)
3b46b162b7 rtmp2: Allow NULL flash version, omitting the field
rtmpsink omits it by default. Allow us to do the same.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5248>
2023-09-12 18:13:06 +00:00
Thomas Schneider
ae56da8447 androidmedia: fix hevc codec profile registration
Fix the codec registration logic such that all supported
profiles are available instead of just the first in the
list.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5313>
2023-09-12 17:27:44 +00:00
Nicolas Dufresne
92820a8cf2 v4l2: object: Handle video helper return value
gst_video_info_set_interlaced_format() can return an error if the
width/height causes integer overflow. Handle this case, so that we can
fail cleanly. This has been experienced while testing an in-progress
driver.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5319>
2023-09-12 17:44:44 +01:00
Nicolas Dufresne
bce3053598 v4l2: bufferpool: Avoid warnings on empty last buffer
Some drivers will push an buffer flagged LAST but empty. In decoder
case, this results in an "producing too many buffer" warning, even
though the result is entirely correct. Detect this case in order to
signal EOS earlier and avoid this warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5319>
2023-09-12 17:42:16 +01:00
Nicolas Dufresne
914e752015 v4l2: bufferpool: Do not resize compressed buffer
Avoid resizing compressed buffer to their maximum size. This fixes a
regression that caused valid but very large streams to be generated.

Fixes #2953

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5319>
2023-09-12 17:42:06 +01:00
Sebastian Dröge
2bd21a6f40 rtpjitterbuffer: Avoid integer overflow in max saveable packets calculation with negative offset
The timestamp offset can be negative, and it can be a bigger negative
number than the latency introduced by the rtpjitterbuffer so the overall
timeout offset can be negative.

Using the negative offset for calculating how many packets can still
arrive in time when encountering a lost packet in an equidistant stream
would then overflow and instead of considering fewer packets lost a lot
more packets are considered lost.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5318>
2023-09-12 10:40:33 +01:00
Akihiro Sagawa
edf37b216f codecparsers: Fix MPEG-1 aspect ratio table
The values defined in ISO/IEC 11172-2 are different from those used so far.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5300>
2023-09-07 21:41:06 +00:00
Nirbheek Chauhan
e07ea8abe3 macos-bison: Update to 3.8.2 and add an ARM64 build
Also includes a shell script to build bison and match pycodestyle.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5299>
2023-09-07 21:36:15 +00:00
Nicolas Dufresne
7851f98886 waylandsink: Crop surfaces to their display width height
Setting the surface source rectangle has been omitted so far. As a side effect
surface created with padded width/height are being scaled down. Fix this using
the viewporter source rectangle configuration. This can later be enhanced
to support crop meta.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5298>
2023-09-07 20:48:05 +00:00
Seungha Yang
1254dd49be d3d11convert: Passthrough allocation query on same caps
Since d3d11convert and its variant elements does not enable basetransform's
passthrough, passthrough allocation query needs to be handled
manually in order to respect downstream element's min/max buffer
requirement.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5297>
2023-09-07 16:36:25 +01:00
Stephan Seitz
d8012a0ead sdp: fix wrong error message for missing clock-rate in caps
When using `gst_sdp_media_set_media_from_caps` on `application/x-rtp` caps
without `clock-rate` it wrongly reports missing payload type even if `payload`
is present in the caps.

This seems to be a copy&paste error from the error message for missing payload
type.

When using payload=10, both `clock-rate` and some other media properties are
defined by the RTP standard so I was wondering whether I could omit `clock-rate`
and was confused about the error message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5252>
2023-08-26 19:35:32 +01:00
Seungha Yang
5f433d7ff2 nvencoder: Fix negotiation error when interlace-mode is unspecified
Use GST_PAD_SET_ACCEPT_INTERSECT() to accept caps without interlace-mode
field

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5240>
2023-08-24 16:38:48 +01:00
Seungha Yang
adea0b45f7 win32ipc: Fix pipe handle leak
Named pipe handle must be closed if it's no longer needed

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2923
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5231>
2023-08-23 18:57:44 +01:00
Seungha Yang
4740a91e00 h265parse: Allow partially broken hvcC data
Ignores parsing error on the last nalu of the array if the nalu type
is not VPS/SPS/PPS

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2905
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5220>
2023-08-23 11:20:33 +00:00
Ming Qian
551fe9c9b1 v4l2object: clear format lists if source change event is received
If decoder notify a source change event when the capture format is
changed, not the resolution changed.

then gst_v4l2_object_acquire_format will retuen false due to
unsupported format.

we need to clear the format lists in the source change flow,
and reenumerate format list

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5223>
2023-08-22 23:59:10 +01:00
Nicolas Dufresne
426bf399d4 v4l2: allocator: Don't close foreign dmabuf
Imported dmabuf are not being duped, so they should never be closed. Instead,
we ensure their live time by having strong reference on their original
buffer. This should fix potential flickering due to dmabuf being closed
too early.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5217>
2023-08-21 23:52:57 +01:00
Jan Schmidt
df9482f39b audio: Make sure to stop ringbuffer on error
Add gst_audio_ring_buffer_set_errored() that will mark the
ringbuffer as errored only if it is currently started or paused,
so gst_audio_ringbuffer_stop() can be sure that the error
state means that the ringbuffer was started and needs stop called.

Fixes a crash with osxaudiosrc if the source element posts
an error, because the ringbuffer would not get stopped and CoreAudio
would continue trying to do callbacks.

Also, anywhere that modifies the ringbuffer state, make sure to
use atomic operations, to guarantee their visibility

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5216>
2023-08-21 19:22:53 +01:00
Jan Schmidt
1347f71b6d mdns: Fix a crash on context error
Make sure not to free the microdns provider context until the
device provider asks it to stop. Fixes a crash if there is
an error (such as MDNS port being busy) that makes the
mdns listener exit early.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5207>
2023-08-20 17:30:11 +01:00
Tim-Philipp Müller
9bf6919f7f tools: gst-inspect: print action signals as emit_by_name() invocations
It's quite confusing to print a function callback signature for
action signals when people need to do a g_signal_by_name() invocation
in order to use this feature. Requires too much background knowledge
about how GObject works under the hood to make sense of that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5206>
2023-08-18 18:41:55 +01:00
Tim-Philipp Müller
65eb526444 tools: gst-inspect: prettify type names for strings
'gchararray' and 'GStrv' are not types used anywhere else
and are just confusing. Map that to 'const gchar *' and 'gchar *'
etc. depending on context.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5206>
2023-08-18 18:41:55 +01:00
Tim-Philipp Müller
aa018007b5 tools: gst-inspect: add vertical spacing between properties and signals
Makes it easier to read and less squashed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5206>
2023-08-18 18:41:55 +01:00
Piotr Brzeziński
c2c2bc2ec2 tools: Disable fault signal handlers in gst-launch/gst-validate on macOS
By default, macOS attempts to run lldb against a misbehaving process to handle the crash. This does not play well
with the SISEGV/SIGQUIT handler we add in gst-launch/gst-validate. The 'spinning' mechanism causes the lldb
and debugserver processes ran by macOS to misbehave, taking 100% CPU and rendering both themselves and the GStreamer
instance frozen and very hard to effectively kill. macOS's Activity Monitor is also unusable while this is happening.

This patch takes the quickest possible solution of just disabling those signal handlers entirely on macOS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5201>
2023-08-18 14:40:24 +00:00
Guillaume Desmottes
c98cf346a9 rtmp2sink: fix crash if message conversion failed
The message pointer is not set so we can't display it in logs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5202>
2023-08-18 14:04:14 +00:00
Jan Alexander Steffens (heftig)
d956a7e2d1 qt: Unbreak build with qt-egl enabled but viv_fb missing
Avoids an error message when the feature is explicitly enabled:

    ERROR: Feature qt-egl cannot be enabled: gstreamer-gl-viv_fb-1.0 is required

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5200>
2023-08-18 12:45:14 +00:00
Olivier Crête
79cf124631 sdpmessage: Parse zero clock-rate as default
It seems there is at least one broken RTSP server out there that returns a clock-rate of 0.
Let's just ignore it and use the default in that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5199>
2023-08-18 12:43:28 +01:00
Wang Chuan
19a0463903 gstadaptivedemux: fix memory leak
GstQuery leaks when using invalid url

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5156>
2023-08-12 15:17:46 +00:00
Seungha Yang
1d7f2c2b9a hlssink2: Always use forward slash separator
g_build_filename() will insert back slash on Windows, and resulting
playlist will contain media segment path with back slash if
"playlist-root" property is specified

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5161>
2023-08-08 10:49:15 +01:00
Jan Schmidt
d710d60c40 audiolatency: Fix event refcounting bug handling latency events
Fix a refcounting bug introduced in
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5146
If upstream returns FALSE when processing a latency event, it will
be unreffed an extra time

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5152>
2023-08-06 09:52:16 +01:00
Jan Schmidt
58c48bab7e audiolatency: Forward latency query and event upstream
Make sure the pipeline still configures the latency that it would configure
if audiolatency was not in the pipeline.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5152>
2023-08-06 09:51:19 +01:00
Nirbheek Chauhan
15a180189a meson: Fix searching of qt5/qt6 tools with qmake
If the pkg-config files are broken, we want to ensure that qmake is
used. This can easily happen on macOS with the official Qt binaries.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5149>
2023-08-04 16:40:21 +01:00
Ryan Pavlik
bf687544ba androidmedia: Add more null checks (of env) to JNI utilities
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5142>
2023-08-03 21:03:50 +00:00
Alicia Boya García
654ca283a7 qtdemux: Fix premature EOS when some files are played in push mode
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2771

This EOS branch exists so that if a seek with a stop is made, qtdemux
stops accepting bytes from the sink after the entire requested playback
range is demuxed, as otherwise we could keep download content that is
not being used.

This patch fixes two flaws that were present in that EOS check:

1) A comparison was made between track time and movie time without conversion.
This made the check trigger early in files with edit lists. This patch fixes
this by converting the track PTS to movie PTS (stream time) for the check.

2) To avoid sending a EOS prematurely when the segment stop is within a GOP and
B-frames are present, the check for EOS should only be done for keyframes. I
gather this was already the intention with the existing code, but because it
used `stream->on_keyframe` instead of the local variable `keyframe` the old
code was checking if the *previous* frame was a keyframe.

It's interesting to note that these two flaws in the old code mask each other
in most cases: the track PTS will have reached the movie end PTS, but EOS would
only be sent if the previous frame was a keyframe. A simple case where they
wouldn't mask each other, reproducing the bug, is a sequence of 3 frame GOPs
with structure I-B-P.

The following validateflow tests have been added to future-proof the
fix:

 * validate.test.mp4.qtdemux_ibpibp_non_frag_pull.default
 * validate.test.mp4.qtdemux_ibpibp_non_frag_push.default

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5114>
2023-08-03 20:22:51 +00:00
Philippe Normand
1ea67bdfc5 transcodebin: Fixes for upstream selectable support
The upstream selectable query was not performed in all situations where we
handle the stream-start event. This could potentially lead to unlinked pads
between decodebin3 and encodebin later on.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5141>
2023-08-03 15:06:54 +01:00
Ryan Pavlik
903e116cc5 androidmedia: Add more null checks to JNI utilities
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5136>
2023-08-02 10:23:26 +01:00
Ryan Pavlik
11595175e5 androidmedia: Fix typo
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5136>
2023-08-02 10:23:26 +01:00
Ryan Pavlik
8602154155 androidmedia: Clear err if we don't have an optional camera field/constant
Fixes startup on devices where those fields/constants are not found.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5136>
2023-08-02 10:23:26 +01:00
Ryan Pavlik
2e08447537 webrtc: Fix docs for create-data-channel action signal
Initial line of the doc comment was incorrect, so the nicely written
docs were not being extracted.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5134>
2023-08-02 00:07:56 +00:00
Philippe Normand
b979ca0dcc decodebin3: Ensure the slot is unlinked before linking to decoder
When switching from a raw stream to an encoded stream we need to make sure the
slot is unlinked, there is code in place for this but it wasn't triggered
because the slot being reconfigured wasn't advertised as linked beforehand.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5133>
2023-08-01 23:50:34 +01:00
Nicolas Dufresne
40311bf665 v4l2: Fix support for left and top padding
In the current implementation, we support for most pixel format left
and top padding by changing the offset in the video meta. Though, to
align driver bytesused to the offset, we recalculate the offset, which
removed the modification we did before.

Instead, save the plane size, and truncate the driver reported bytesused
to the expected size, which ensures that the offsets still match. This
should also fix issues were the buffer size ended up bigger then the
pool size due to driver introduced padding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5132>
2023-08-01 19:54:57 +01:00
Guillaume Desmottes
bbca6cc8c8 videoflip: fix concurrent access when modifying the tag list
We were checking if the tag list is writable, but it may actually be
shared through the same event (tee upstream or multiple consumers).

Fix a bug where multiple branches have a videoflip element checking the
taglist. The first one was changing the orientation back to rotate-0
which was resetting the other instances.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5099>
2023-07-25 17:32:50 +01:00
Xabier Rodriguez Calvar
1a3deef85f qtdemux: attach cbcs crypt info at the right moment
Before it was always added but that can cause issues when the stream begins
unencrypted.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5096>
2023-07-25 12:43:28 +01:00
Nirbheek Chauhan
b4f137e2ba meson: Ensure that soup plugin is built on Windows
The libpsl subproject wasn't building successfully and CI didn't
notice because:

1. The plugin wasn't explicitly enabled
2. Even when the plugin is explicitly enabled, the dep is not required
   at build time when not building a static plugin

So fix all of these issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
2023-07-24 16:36:56 +01:00
Nirbheek Chauhan
8585319898 libpsl.wrap: Fix MSYS2 build failure
Also switch from git repo to tarball.

https://github.com/rockdaboot/libpsl/pull/211

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
2023-07-24 15:39:07 +01:00
Stéphane Cerveau
48d183cec3 libxml2: update to 2.10.3-4
The previous version was failing to configure due to
```
"Dependencies must be external dependencies"
```
on zlib

Fixed by https://github.com/mesonbuild/wrapdb/pull/865/files

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
2023-07-24 15:36:34 +01:00
Stéphane Cerveau
674f2f6f52 wrap: add libpsl patch to fix win build
These patches are necessary for Windows build since
0.21.2

See
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
2023-07-24 15:36:34 +01:00
Stéphane Cerveau
0c6dc2c86f wrap: update libpsl to 0.21.2
On macos, the build is failing with 0.21.1,
a patch has been landed to fix the issue, see

https://github.com/rockdaboot/libpsl/pull/166

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4890>
2023-07-24 15:36:34 +01:00
Haihua Hu
03119a388c decodebin3: avoid identity, sinkpad, parsebin leakage when reset input
when reset_input, need remove identity/parsebin from decodebin3
when release_pad, need call free or reset input if collection
didn't change

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5086>
2023-07-21 18:20:37 +01:00
Tim-Philipp Müller
60120003c0 Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5082>
2023-07-20 16:57:47 +01:00
Tim-Philipp Müller
bf6ce1d64a Release 1.22.5 2023-07-20 15:22:48 +01:00
Ruslan Khamidullin
337d2457e0 video: add extensive tests for gst_video_time_code_is_valid()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5061>
2023-07-19 16:05:33 +01:00
Ruslan Khamidullin
aded70efaf video: accept timecode of 119.88 (120/1.001) FPS
The drop-frame rules are specified in “SMPTE ST 12-3:2016” and are
consistent with the traditional ones:

“

To minimize fractional time deviation from real time, the first two
super-frame numbers (00 and 01) shall be omitted from the count at the
start of each minute except minutes 00, 10, 20, 30, 40, and 50. Thus the
first eight frame numbers (0 through 7) are omitted from the count at
the start of each minute except minutes 00, 10, 20, 30, 40, and 50.
”

Where “super-frame” is a group of 4 frames for 120 FPS.

Fixes #2797

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5061>
2023-07-19 16:05:06 +01:00
Sebastian Dröge
6910a24c14 video: timecode: Add support for framerates lower than 1fps
These are not explicitly defined but the existing calculations can be
extended to also cover that case by inverting them to avoid floating
point calculations.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2465

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5074>
2023-07-19 15:59:19 +01:00
Sebastian Dröge
eb89e0a13e rmdemux: Check for integer overflow when calculation audio packet size
Fixes ZDI-CAN-21444
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2782

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5073>
2023-07-19 13:13:45 +00:00
Sebastian Dröge
ccdb10de52 rmdemux: Use GST_LOG_OBJECT instead of GST_LOG
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5073>
2023-07-19 13:13:45 +00:00
Sebastian Dröge
743381cba7 rmdemux: Check that enough SIPR audio data is available when copying
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5073>
2023-07-19 13:13:45 +00:00
Sebastian Dröge
4266ba0fd2 rmdemux: Check for integer overflows when calculating the size of SIPR audio buffers
Fixes ZDI-CAN-21443
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2782

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5073>
2023-07-19 13:13:45 +00:00
Sebastian Dröge
6e61b944a4 rmdemux: Use GST_LOG_OBJECT instead of GST_LOG
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5073>
2023-07-19 13:13:45 +00:00
Philippe Normand
8d486d1398 decodebin3: Prevent a critical warning when reassigning output slots
Do not attempt to send a streams-selected message when reassigning
an output slot in case upstream signalled that it is handling stream selection.
In this case decodebin3 doesn't keep track of stream
collections (`dbin->collection` is NULL).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5069>
2023-07-19 11:48:40 +00:00
Philippe Normand
eea9f74f95 decodebin3: Fix slot input linking when the associated stream has changed
Setting the input field on the empty slot prevents future linking of it and will
result in flow errors later on.

This was observed in WebKit's MediaStream source element, when it changes the
caps on one of its associated streams, from an encoded format to a raw video
format. The associated stream-id on the sticky stream-start event doesn´t
change, but the element creates a new GstStream with a different ID and sets it
on the stream-start event. Stream parsing is disabled in urisourcebin, so
decodebin3 handles the parsing. Without this patch we would end-up with unlinked
pads in decodebin3 after switching to the raw video format.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5067>
2023-07-19 09:12:53 +01:00
Philippe Normand
f9360d47c1 query: Add a quark for SELECTABLE query type
So that `gst_query_type_get_name()` won't return "unknown" for this type.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5067>
2023-07-19 09:12:53 +01:00
Edward Hervey
1ee26b0a7a urisourcebin: Set source element to READY before querying it
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.

This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).

Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5058>
2023-07-18 14:45:12 +00:00
Edward Hervey
3e541953f8 hlsdemux2: Don't set a referer when updating playlists
In the same way we don't for regular playlists in the base class.

If there is a referer specified by the app/user, the downloadhelper will set it
accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5057>
2023-07-18 16:00:49 +02:00
Edward Hervey
46d5a64117 adaptivedemux2: Don't blindly set the main manifest URI as referer
There's no guarantee it will *actually* be the URI which refered to what we are
downloading. It could be a stream URI or anything else.

Instead of putting something wrong, put no (specific) referer as a better choice

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5057>
2023-07-18 16:00:49 +02:00
Andoni Morales Alastruey
ee43b6421e videodecoder: fix segfault copying buffer metas
The current implementation copies metas without checking if the buffer
is writable.

The operation that needs to be done, replacing the input buffer and
copying the metas, is only part of that process. We create a new function
that does both.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5054>
2023-07-18 12:22:10 +00:00
Doug Nazar
a1d2cea913 ges: validate: Use correct types when getting structure values
From https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/247

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5055>
2023-07-18 11:43:52 +00:00
Doug Nazar
e1e9fbd26b ges: tests: Use correct variable types when setting properties
From https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/247

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5055>
2023-07-18 11:43:52 +00:00
Víctor Manuel Jáquez Leal
90cfe4746e jpegparse: Warn only malformed data in APP data.
It's only malformed data in APP when its length is less than 6 chars,
because it should have at least an id string. Otherwise, if the id string
is not handled, no warning is raised, only a debug message noticing it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5053>
2023-07-18 12:30:57 +02:00
Víctor Manuel Jáquez Leal
122e7b7584 jpegparse: Parse AVI1 tag in app0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5053>
2023-07-18 12:30:57 +02:00
He Junyan
107553843c va: jpegdecoder: Do not check SOS state when parsing DRI marker.
According to spec, the JPEG_MARKER_DRI(Restart interval definition)
marker can come before the SOS marker. So we should not check the SOS
state when parsing the DRI marker.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5053>
2023-07-18 12:30:57 +02:00
Bastien Nocera
1e7c085791 gtk: Fix critical caused by pointer movement when stream is getting ready
This check fixes a critical warning that can happen when a pointer motion
happens and the video doesn't have its width/height information available.

GStreamer-Video-CRITICAL **: gst_video_center_rect: assertion 'src->h != 0' failed

 #0  g_logv (log_domain=0x7ffff705e176 "GStreamer-Video", log_level=G_LOG_LEVEL_CRITICAL, format=<optimized out>, args=<optimized out>) at ../../../../Projects/jhbuild/glib/glib/gmessages.c:1422
 #1  0x00007ffff7e1a81d in g_log (log_domain=<optimized out>, log_level=log_level@entry=G_LOG_LEVEL_CRITICAL, format=format@entry=0x7ffff7e77a9d "%s: assertion '%s' failed") at ../../../../Projects/jhbuild/glib/glib/gmessages.c:1460
 #2  0x00007ffff7e1b749 in g_return_if_fail_warning (log_domain=<optimized out>, pretty_function=<optimized out>, expression=<optimized out>) at ../../../../Projects/jhbuild/glib/glib/gmessages.c:2930
 #3  0x00007ffff701d90b in gst_video_sink_center_rect (src=..., dst=..., result=result@entry=0x7fffffffc6d0, scaling=scaling@entry=1) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-base/gst-libs/gst/video/gstvideosink.c:105
 #4  0x00007fffe5652dbb in _fit_stream_to_allocated_size (result=0x7fffffffc6d0, allocation=0x7fffffffc6c0, base_widget=0x9396f0) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:326
 #5  gtk_gst_base_widget_display_size_to_stream_size (base_widget=base_widget@entry=0x9396f0, x=1207.7109375, y=811.84765625, stream_x=stream_x@entry=0x7fffffffc720, stream_y=stream_y@entry=0x7fffffffc728) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:344
 #6  0x00007fffe5651a4b in gst_gtk_base_sink_navigation_send_event (navigation=0x5ff990, event=0x178a730) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gstgtkbasesink.c:340
 #7  0x00007fffe5652432 in gtk_gst_base_widget_motion_event (widget=<optimized out>, event=event@entry=0x1f14b60) at ../../../../Projects/jhbuild/gstreamer/subprojects/gst-plugins-good/ext/gtk/gtkgstbasewidget.c:404

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5051>
2023-07-18 07:36:41 +02:00
Michael Tretter
5b60ea9a8a v4l2videoenc: remove empty sink_query
The sink_query() function simply calls the sink_query() function of the parent
videoencoder class. Remove the override to simply directly call the parent's
function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5036>
2023-07-14 00:07:27 +02:00
Michael Tretter
2e5929abfc v4l2videoenc: replace custom QUERY_CAPS handling with getcaps callback
The videoencoder base class uses getcaps() to ask a subclass for the caps in its
sink_query_default() implementation.

Replace the custom handling of the QUERY_CAPS in the v4l2videoenc with an
implementation of getcaps() that returns the caps that are supported by the
v4l2videoenc to return these caps in the query.

This getcaps() implementation also calls the provided proxy_getcaps(), which
sends a caps query to downstream. This fixes the v4l2videoenc element to respect
limits of downstream elements in a sink query.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5036>
2023-07-14 00:07:27 +02:00
Víctor Manuel Jáquez Leal
825ac9a77e vaapidecode,vaapipostproc: Disable DMAbuf from caps negotiation
Given the amount of complains about artifacts when negotiating dmabuf
given incompatible drm-formats, and that there's no enough bandwidth
for a proper and quick fix in gstreamer-vaapi, this patch disables,
from decoders and postprocessor, the DMABuf caps feature.

For those who needs DMABuf can use the va elements in -bad, increasing
their ranking for autoplugging by using the environment variable
GST_PLUGIN_FEATURE_RANK=vah264dec:MAX, for example.

This can be considered a first step to the deprecation of
gstreamer-vaapi in favor of the va plugin in -bad.

Fixes: #1137
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5029>
2023-07-13 01:23:55 +02:00
Philippe Normand
e7724ecf0b decodebin3: Remove spurious input locking during parsebin reconfiguration
Commit 22917b140f added extra locks in
`reset_input_parsebin()` but all call sites of that function already take the
input lock.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5025>
2023-07-12 21:32:53 +02:00
Carlos Rafael Giani
ca868332f1 gl: Take into account viv-fb vs. viv_fb naming in meson scripts
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4959>
2023-07-12 22:45:04 +10:00
Matthew Waters
661dcdaf30 gl: provide a pkg-config/gir file for the viv-fb backend
Required to be able to generate coherent bindings for window system
specific APIs due to limitations in gobject-introspection.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4959>
2023-07-12 22:45:04 +10:00
Matthew Waters
64ebf6cc67 gl: don't install the viv-fb window header file
It is not needed at all by any external implementations and should not
be exposed to the outside world.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4959>
2023-07-12 22:45:04 +10:00
Carlos Rafael Giani
bd7c1adba9 gl: Separate viv direct texture checks from viv-fb winsys check
Vivante direct textures do not depend on the viv-fb windowing system.
Decouple these two to be able to use direct textures even when viv-fb
is not enabled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4959>
2023-07-12 22:45:01 +10:00
Nirbheek Chauhan
a7ba1428e0 meson: Install viv-fb GL headers, needed by i.MX
Needed by qmlglsink at build time to allocate a viv-fb display.

Without this, the GL fastpath doesn't work, and performance is really
bad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4959>
2023-07-12 22:44:58 +10:00
Tim-Philipp Müller
bda8cf583f taglist, plugins: fix compiler warnings with GLib >= 2.76
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):

    ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’

which we get with newer GLib versions. These were all harmless.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5015>
2023-07-12 08:58:50 +00:00
Seungha Yang
62aa802d17 d3d11bufferpool: Fix heavy CPU usage in case of fixed-size pool
There's no reason to release GstMemory manually at all.
If we do release GstMemory, corresponding GstBuffer will be
discarded by GstBufferPool baseclass because the size is changed
to zero.

Actual cause of heavy CPU usage in case of fixed-size pool
(i.e., decoder output buffer pool) and if we remove GstMemory from
GstBuffer is that GstBufferPool baseclass is doing busy wait in acquire_buffer()
for some reason. That needs to be investigated though, discarding
and re-alloc every GstBuffer is not ideal already.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4943>
2023-07-11 23:23:12 +00:00
Seungha Yang
b8e7012882 qt6: Set sampler filtering method
QQuickItem::smooth property doesn't seem to be propagated to
newly created QSGSimpleTextureNode automatically.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2793
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5016>
2023-07-11 22:26:24 +00:00
Philippe Normand
c067269737 webrtcbin: Prevent critical warning when creating an additional data channel
The max_channels value wasn't clamped to 65534 in all situations.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5012>
2023-07-11 20:39:59 +00:00
David Craven
ca48193cd6 matroska: demux: Strip signal byte from encrypted blocks
Removes the signal byte when the frame is unencrypted to
be consistent with when the frame is encrypted.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5014>
2023-07-11 13:53:02 +00:00
Maksym Khomenko
185307f0be appsink: add missing make_writable call
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5013>
2023-07-11 13:21:52 +01:00
Thibault Saunier
0e633b2a90 bad: audioaggregator: Do not post message before being constructed
`gst_aggregator_set_latency` will post a message on the bus which
triggers traces for not constructed objects which fails in rust tracers
as object should have names in all traces.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4984>
2023-07-10 19:00:49 +01:00