Otherwise we're going to set a rather arbitrary DTS of segment.start (usually
0) for live sources, which confuses synchronization if the source started
capturing at a later time. And it's especially wrong for raw media, for which
we should not set any DTS at all.
https://bugzilla.gnome.org/show_bug.cgi?id=747731
It could be triggered by:
gst-launch-1.0 videotestsrc num-buffers=20 ! videcrop bottom=214748364 ! videoconvert ! autovideosink
Spotted while testing:
https://bugzilla.gnome.org/show_bug.cgi?id=743910
The flush-stop event should not restart the task for live sources unless
the element is playing. This was breaking seeks in pause with the rtpsrc.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
Otherwise baseparse will consider empty streams to be an error while
an empty stream is a valid scenario. With this patch, errors would
only be emitted if the parser received data but wasn't able to
produce any output from it.
This change is only for push-mode operation as in pull mode an
empty file can be considered an error for the one driving the
pipeline
Includes a unit test for it
https://bugzilla.gnome.org/show_bug.cgi?id=733171
check_run.c: In function 'sig_handler':
check_run.c:127:13: warning: 'child_sig' may be used uninitialized in this function [-Wmaybe-uninitialized]
killpg(group_pid, child_sig);
^
check_run.c:130:31: warning: 'idx' may be used uninitialized in this function [-Wmaybe-uninitialized]
sigaction(sig_nr, &old_action[idx], NULL);
^
Otherwise e.g. ctrl+c in the test runner exits the test runner, while the test
itself is still running in the background, uses CPU and memory and potentially
never exits (e.g. if the test ran into a deadlock or infinite loop).
The reason why we have to manually kill the actual tests is that after
forking they will be moved to their own process group, and as such are
not receiving any signals sent to the test runner anymore. This is supposed
to be done to make it easier to kill a test, which it only really does if
the test itself is forking off new processes.
This fix is not complete though. SIGKILL can't be caught at all, and error
signals like SIGSEGV, SIGFPE are currently not caught. The latter will only
happen if there is a bug in the test runner itself, and as such seem less
important.
Large scale skip is an optimization, and thus it is safer to
stop skipping than to continue. Clear skip on segments and
discontinuities, as these are points where it is possible that
the original idea of "bytes to skip" changes.
GstNetAddress can be used to store ancillary data which was received with
or is to be sent alongside the buffer data. When used with socket sinks
and sources which understand this meta it allows sending and receiving
ancillary data such as unix credentials (See `GUnixCredentialsMessage`)
and Unix file descriptions (See `GUnixFDMessage`).
This will be useful for implementing protocols which use file-descriptor
passing in payloaders/depayloaders without having to re-implement all the
socket handling code already present in elements such as multisocketsink,
etc. This, in turn, will be useful for implementing zero-copy video IPC.
This meta uses the platform independent `GSocketControlMessage` API
provided by GLib as a part of GIO. As a result this new meta does not
require any new dependencies or any conditional compliation for
portablility, although it is unlikely to do anything useful on non-UNIX
platforms.
Allows buffers to be reclaimed when caps is to be renegotiated so
that bufferpools can be stopped. As the allocation query is
serialized all buffers have been already drained from the pipeline,
except this last_sample one.
https://bugzilla.gnome.org/show_bug.cgi?id=682770
Use gst_buffer_copy_deep() to force the copy of the underlying
memory instead of possibly doing a shallow copy of the buffer
and just referencing the memory
https://bugzilla.gnome.org/show_bug.cgi?id=745287
Based on patch from Song Bing <b06498@freescale.com>
Don't just set the need_preroll flag to TRUE in all cases. When we
are already prerolled it needs to be set to FALSE and when we go to
READY we should not touch it. We should only set it to TRUE in other
cases, like what the code above does.
See https://bugzilla.gnome.org/show_bug.cgi?id=736655
+ Gets installed
+ Uses a helper tool, gst-completion-helper, installed in
bash-completions/helpers.
+ Adds a common script that other tools can source.
https://bugzilla.gnome.org/show_bug.cgi?id=744877
Add a hold off when the clock calibration suddenly loses synch,
as it may be a glitch, but also make sure we update if it stays
desynched for more than a few seconds
Add the minimum-update-interval property to the clock, with a default
of 50ms and don't send polling requests faster than that. That helps to
ensure we spread the initial observations out a little - startup takes
a little longer, but tracking is more stable.
Move the discont skew limiting code inside an if statement, so that
it's only done when the linear regression succeeds and the clock
parameters might actually change.
Allow setting a GstBus on the network clock client
via a new 'bus' object property. If a bus is set, the
clock will output an element message containing statistics
about new clock observations and the clock correlation.
When the local clock is synchronised with the remote, limit the
maximum jump in the clock at any point to be one average RTT to
the server. Also, publish in the bus message whether we are
synched with the remote or not.
Both for the peer filter caps and the converted caps based on the peer caps.
If the peer filter caps are EMPTY, the peer caps query will also return
EMPTY. There's no ned to both downstream/upstream with this query.
Previously GStreamer got access to the libcheck interface by including
libs/gst/check/check.h which in turn included internal-check.h in the
same directory. internal-check.h was generated by copying
libs/gst/check/libcheck/check.h which in turn was generated from
check.h.in in the same directory. In this case generating
libs/gst/check/libcheck/check.h is unnecessary, in addition this file
was accidentally distributed in generated project tarballs.
Now libs/gst/check/internal-check.h is generated directly from
libs/gst/check/libcheck/check.h.in by configure. This means that the
libcheck source must include internal-check.h instead of the previously
generated libs/gst/check/libcheck/check.h. However the unnecessary
intermediate step is now skipped.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=741359
Previously embedded libcheck versions did not depend on (u)intmax_t and
doing so would require projects using GStreamer's check framework to add
AX_CREATE_STDINT_H to their configure.ac. A workaround is to fallback to
glib types. This patch assumes that glib.h is always included before
internal-check.h which is ok since everything Gstreamer would include
gst/gstcheck.h instead of directly including internal-check.h.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=727826
Reintroduced patches:
* Make sure that fail_if(1) actually fails
from commit 9f99d056a2
New patches due to updated libcheck (based on 0.9.14):
* Checks in m4/check-checks.m4 to cater for new dependencies
* Conditional compile-time compat POSIX fallbacks for libcheck
* Avoid relative paths for libcheck header files
* Make timer_create() usage depend on posix timers, not librt
* Rely on default AX_PTHREAD behavior to allow HAVE_PTHREAD to be used
when checking for types and functions (like clock_gettime())
* Avoid double declaration of clock_gettime() when availabe outside of
librt by making compat clock_gettime() declaration conditional
* check 0.9.9 renamed _fail_unless() and 0.9.12 later renamed it again
to _ck_assert_failed(), so ASSERT_{CRITICAL,WARNING}() now calls this
function
* Remove libcheck fallback infrastructure for malloc(), realloc(),
gettimeofday() and snprintf() since either they appear to be
available or they introduce even more dependencies.
The result is an embedded check in gstreamer that has been tested by
running check tests in core, -base, -good, -bad, -ugly and rtsp-server
on Linux, OSX and Windows.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=727826
This lifts the files almost verbatim (the changes being running though
gst-indent and fixing the FSF address) from the upstream respository.
Therefore this commit reverts some GStreamer-specific patches to check
that will be reintroduced next.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=727826
When using a negative rate (rate being segment.rate * segment.applied_rate),
we will end up reporting decreasing positions, therefore adjust the clamping
against last reported value accordingly.
Fixes positions getting properly reported with applied_rate < 0.0
https://bugzilla.gnome.org/show_bug.cgi?id=738092
TRUE is 1, but every other non-zero value is also considered true. Comparing
for equality with TRUE would only consider 1 but not the others.
Also normalize booleans in a few places.
Instead of checking if our outcaps are equivalent to the previous incaps, and
if that is the case not setting any caps on the pad... compare against our
previous outcaps because that's what we care about.
Fixes some cases where the outcaps became equivalent to the previous incaps,
but the previous outcaps were different and we were then sending buffers
downstream that were corresponding to the caps we forgot to set on the pad.
Resulting in crashes or image corruption.
Currently we are just returning FALSE, but we do have the information
we should just answer the query the same way as when answering through
the GstElement.query vmethod default implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=739580
Fixes 'Attempt to unlock mutex that was not locked'
warning with newer GLibs when sink is shut down in
certain situations. Triggered by the decodebin
test_reuse_without_decoders unit test in -base
sometimes, esp. on slower machines.
In order for user to be able to track changes in the value set in
GstTimedValueControlSource the following signals have been added:
* value-added
* value-removed
* value-changed
To be able to use a GstControlPoint to be marshalled into the signals,
the GstControlPoint structure is now registerd as a GBoxed type.
New API:
~~~~~~~
* GstTimedValueControlSource::value-added
* GstTimedValueControlSource::value-removed
* GstTimedValueControlSource::value-added
https://bugzilla.gnome.org/show_bug.cgi?id=737616
Add a method letting people to ensure that unreffing one object
leads to its destruction, and possibly the destruction of more object
(think destruction of a GstBin etc...).
https://bugzilla.gnome.org/show_bug.cgi?id=736477
Add a first_buffer boolean state flag to have baseparse do actions
before pushing data. This is used to check the caps for streamheader
buffers that are prepended to the stream, but only if the first buffer
isn't already marked with the _HEADER flag. In this case, it is assumed
that the _HEADER marked buffer is the same as the streamheader.
https://bugzilla.gnome.org/show_bug.cgi?id=735070
Adds API to get or peek a sub-reader of a certain size from
a given byte reader. This is useful when parsing nested chunks,
one can easily get a byte reader for a sub-chunk and make
sure one never reads beyond the sub-chunk boundary.
API: gst_byte_reader_peek_sub_reader()
API: gst_byte_reader_get_sub_reader()
Just remove one skip annotation that causes this:
** (g-ir-compiler:12458): ERROR **: Caught NULL node, parent=empty
with older g-i versions such as 1.32.1.
Adds gst_byte_reader_masked_scan_uint32_peek just like
GstAdapter has a _peek and non _peek version
Upgraded tests to check that the returned value is correct in the
_peek version
API: gst_byte_reader_masked_scan_uint32_peek
https://bugzilla.gnome.org/show_bug.cgi?id=728356
When going to READY, it is possible that we are still pusing a frame but that
our srcpad has already been set to flushing. In that case we should not
post any error on the bus but instead cleanly return FLOW_FLUSHING.
https://bugzilla.gnome.org/show_bug.cgi?id=733320
* GstGlobalDeviceMonitor was renamed to GstDeviceMonitor
* Expand GST_MESSAGE_DEVICE to the full enum value names
* Correct the incorrect references to the GstDeviceProvider interfaces
* Describe caps arguments for gstcheck interface
* Add missing docs for GstNetAddressMeta and its add function
* Add docs for toc helper macros
* Avoid refering to GstValueList type as done elsewhere
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=732786
When the parser receives non-aligned packets it can push a buffer
and get a not-linked return while still leaving some data still to
be parsed. This remaining data will not form a complete frame and
the subclass likely returns _OK and baseparse would take that
as the return, while it the element is actually not-linked.
This patch fixes this by storing the last flow-return from a push
and using that if a parsing operation doesn't result in data being
flushed or skipped.
https://bugzilla.gnome.org/show_bug.cgi?id=731474
Currently the scan uses Boyer-moore method and its performance is good.
but, it can be optimized from an implementation of view.
The original scan code is implemented by byte array and index-based access.
In _scan_for_start_code(), the index is increasing from start to end and the
base address of the byte array is referred to as return value.
In the case, index-based access can be replaced by pointer access, which
improve the performance by removing index-related operations.
Its performace is enhanced by approximately 8% on arm-based embedded devices.
Although it seems trivial, it can affect the overall performance because the
_scan_for_start_code() function is very often called when H.264/H.265 video is
played.
In addition, the technique can apply for all architectures and it is good in
view of readability and maintainability.
https://bugzilla.gnome.org/show_bug.cgi?id=731442
Adds a utility struct that is capable of storing and aggregating flow returns
associated with pads.
This way all demuxers will have a standard function to use and have the
same expected results.
Includes tests.
https://bugzilla.gnome.org/show_bug.cgi?id=709224
Buffer pool set_config() may return FALSE if requested configuration needed
small changes. Reget the config and try setting it again (validating the
changes first). This ensure we have a configured pool if possible.
https://bugzilla.gnome.org/show_bug.cgi?id=727916
exit() will call atexit handlers, which may try to
clean up things or wait for things to get cleaned up,
which we don't want or need. We just want to stop
and let the parent know about the failure as quickly
as possible in case fork() is used.
Fixes timeouts on assert failures in checks where
an exit handler waits for things to stop, but they
don't stop because they haven't been shut down,
and they haven't been shut down because there's no
simple way to do so on failures.
http://sourceforge.net/p/check/patches/50/
Currently, if prepare() takes too much time, we skip the call to render().
The side effect of this, is that we endup starving the render(). The solution
in this patch is to always render frames that are on time before prepare() is
executed. This will maximize the number of frames we display and smoothly
degrade the rendering performance.
https://bugzilla.gnome.org/show_bug.cgi?id=729335
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
Keep it simple. Likely also makes things easier for bindings,
and efficiency clearly has not been a consideration given how
the existing code handled these lists.
In order to be deterministic, multiple waiting GstClockIDs needs to be
released at the same time, or else one can get into the situation that
the one being released first can add itself back again before the next
one waiting is released.
Test added for new API and old tests rewritten to comply.
