Add latency configuration logic to transportsendbin to
isolate it from the overall pipeline latency. That means that
it configures minimum latency internally based on the
latency query, and sends a latency event upstream that
matches.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1209
When emitting ICE candidates, also merge them to the local and
pending description so they show up in the SDP if those are
retrieved from the current-local-description and
pending-local-description properties.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/676
- Do not send ABORTs for unexpected packets are as response to INIT
- Enable interleaving of messages of different streams
- Configure 1MB send and receive buffer for the socket
- Enable SCTP_SEND_FAILED_EVENT and SCTP_PARTIAL_DELIVERY_EVENT events
- Set SCTP_REUSE_PORT configuration
- Set SCTP_EXPLICIT_EOR and the corresponding send flag. We probably
want to split packets to a maximum size later and only set the flag
on the last packet. Firefox uses 0x4000 as maximum size here.
- Enable SCTP_ENABLE_CHANGE_ASSOC_REQ
- Disable PMTUD and set an maximum initial MTU of 1200
Calling bind() only sets up some data structures and calling connect()
only produces one packet before it returns. That packet is stored in a
queue that is asynchronously forwarded by the encoder's source pad loop,
so not much is happening there either. Especially no waiting is
happening here and no forwarding of data to other elements.
This fixes a race condition during connection setup: the connection
would immediately fail if we pass a packet from the peer to the socket
before bind() and connect() have returned.
This can't happen anymore as bind() and connect() have returned already
before both elements reach the PAUSED state, and in webrtcbin there is
an additional blocking pad probe before the decoder that does not let
any data pass through before that anyway.
The library is thread-safe by itself and potentially calls back into our
code, not only from the same thread but also from other threads. This
can easily lead to deadlocks if we try to hold our mutex on both sides.
Starting from WPEBackend-FDO 1.6.x, software rendering support is available.
This features allows wpesrc to be used on machines without GPU, and/or for
testing purpose. To enable it, set the `LIBGL_ALWAYS_SOFTWARE=true` environment
variable and make sure `video/x-raw, format=BGRA` caps are negotiated by the
wpesrc element.
Otherwise it can happen that e.g. the stream-start event is tried to be
sent as part of pushing the first buffer. Downstream might not be in
PAUSED/PLAYING yet, so the event is rejected with GST_FLOW_FLUSHING and
because it's an event would not cause the blocking pad probe to trigger
first. This would then return GST_FLOW_FLUSHING for the buffer and shut
down all of upstream.
To solve this we return GST_PAD_PROBE_DROP for all events. In case of
sticky events they would be resent again later once we unblocked after
blocking on the buffer and everything works fine.
Don't handle events specifically in sink pad blocking pad probes as here
downstream is not linked yet and we are actually waiting for the
following CAPS event before unblocking can happen.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1172
Without this it might happen that received data from the DTLS transport
is already passed to sctpdec before its state was set to PLAYING. This
would cause the data to be dropped, GST_FLOW_FLUSHING to be returned and
the whole DTLS transport to shut down.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1172
among other things.
Using a GCond can easily lead to deadlocks and only duplicates the
waiting code from gstpad.c in the best case.
In this case it actually could lead to a deadlock if both RTP and RTCP
were waiting. Only one of them would be woken up because g_cond_signal()
was used instead of g_cond_broadcast().
Change how content-length is set for HTTP POST headers, letting curl set
the header (given the content-length) instead of manually writing it.
This enables curl to know the content-length of the data.
In curl 7.66, if curl does not know the content-length (e.g. when
manually writing the header) curl will use Transfer-Encoding: chunked,
which might not be desired.
Use a double instead of a plain float for intermediary
property values, so we have enough bits to store INT_MAX
and it doesn't get rounded and wrapped to -1 when cast
back to a 32-bit integer.
Fixes criticals like
g_param_spec_int: assertion 'default_value >= minimum && default_value <= maximum' failed
when loading LADSPA plugins from the Linux Studio Plugins
Project (http://lsp-plug.in) in GStreamer.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1194
The avtpsink element is expected to transmit AVTPDUs at specific times,
according to GstBuffer timestamps. Currently, the transmission time is
controlled in software via the rendering synchronization mechanism
provided by GstBaseSink class. However, that mechanism may not cope with
some AVB use-cases such as Class A streams, where AVTPDUs are expected
to be transmitted at every 125 us. Thus, this patch introduces avtpsink
own mechanism which leverages the socket transmission scheduling
infrastructure introduced in Linux kernel 4.19. When supported by the
NIC, the transmission scheduling is offloaded to the hardware, improving
transmission time accuracy considerably.
To illustrate that, a before-after experiment was carried out. The
experimental setup consisted in 2 PCs with Intel i210 card connected
back-to-back running an up-to-date Archlinux with kernel 5.3.1. In one
host gst-launch-1.0 was used to generate a 2-minute Class A stream while
the other host captured the packets. The metric under evaluation is the
transmission interval and it is measured by checking the 'time_delta'
information from ethernet frames captured at the receiving side.
The table below shows the outcome for a 48 kHz, 16-bit sample, stereo
audio stream. The unit is nanoseconds.
| Mean | Stdev | Min | Max | Range |
-------+--------+---------+---------+---------+---------+
Before | 125000 │ 2401 │ 110056 │ 288432 │ 178376 |
After | 125000 │ 18 │ 124943 │ 125055 │ 112 |
Before this patch, the transmission interval mean is equal to the
optimal value (Class A stream -> 125 us interval), and it is kept the
same after the patch. The dispersion measurements, however, had
improved considerably, meaning the system is now consistently
transmitting AVTPDUs at the correct time.
Finally, the socket transmission scheduling infrastructure requires the
system clock to be synchronized with PTP clock so this patches modifies
the AVTP plugin documentation to cover how to achieve that.
This patch refactors gst_avtp_sink_start() by moving all socket
initialization code to its own function. This change prepares the code
to the next patch which will introduce avtpsink's own rendering
synchronization mechanism.
Current avtpsink code opens the AF_PACKET socket with SOCK_NONBLOCK
option. However, we actually want sendto() to block in case there isn't
available space in socket buffer.
This patch refactors both avtpsink and avtpsrc code so we use the
if_nametoindex() helper instead of building a request and issuing an
ioctl to get the if_index.
The receive bin should block buffers from reaching dtlsdec before
the dtls connection has started.
While there was code to block its sinkpads until receive_state
was different from BLOCK, nothing was ever setting it to BLOCK
in the first place. This commit corrects this by setting the
initial state to BLOCK, directly in the constructor.
In addition, now that blocking is effective, we want to only
block buffers and buffer lists, as that's what might trigger
errors, we want to still let events and queries go through,
not doing so causes immediate deadlocks when linking the
bin.
And free data with the correct free() function in the receive callback
by passing it to gst_buffer_new_wrapped_full() instead of
gst_buffer_new_wrapped().
When a pipeline is stopped (actually when the waylandsink element
state changes from PAUSED to READY) the video surface is cleared, but
the opaque black surface behind is not. Fix this by actually clearing
both surfaces.
We need the streams' pt maps updated before requesting pads
on rtpbin, because this is what will trigger the requesting
of FEC encoders, and our handler for this request looks for
the payload types in the relevant stream's pt map.
Fixes#1187
Otherwise we would start sending data to the DTLS connection before, and
the DTLS elements consider this an error.
Also RFC 8261 mentions:
o A DTLS connection MUST be established before an SCTP association can
be set up.
For us it can happen that the DTLS transports are still in the process
of connecting while the ICE transport is already completed. This
situation is not specified in the spec but conceptually that means it is
still in the process of connecting.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/758
Previously we simply logged errors but never reported them to elements
or even to the user. Fatal errors are now properly reported.
Additionally proper connection closing is implemented based on EOS:
- dtlsenc: EOS will cause close_notify to be sent to the peer and only
if the peer also sent back close_notify we will forward the
EOS event.
- dtlsdec: EOS will be forwarded normally, this only means that the
unterlying transport was closed. On receiving a DTLS packet
containing close_notify, return EOS and send EOS downstream.
