Change semantics of gst_base_parse_push_frame() and make it take
ownership of the whole frame, not just the frame contents. This
is more in line with how gst_pad_push() etc. work. Just transfering
the content, but not the container of something that's not really
known to be a container is hard to annotate properly and probably
won't work. We mark frames allocated on the stack now with a private
flag in gst_base_parse_frame_init(), so gst_base_parse_frame_free()
only frees the contents in that case but not the frame struct itself.
https://bugzilla.gnome.org/show_bug.cgi?id=518857
API: gst_base_parse_frame_new()
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.
This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
Seems like the best fit to what it does, and is shorter than
set_frame_properties() which might also have been confusing
because of GstBaseParseFrame.
https://bugzilla.gnome.org/show_bug.cgi?id=518857
This is more in line with e.g. GstBaseTransform's API, and makes for nicer
to read code. No getters for now since I don't see any use case for them,
the API is for subclasses, which usually know what format they're
dealing with already and hence know what they've set.
https://bugzilla.gnome.org/show_bug.cgi?id=518857
The first because it seems a better fit conceptually, the second
to express booleanness. Also change the accessor macros for subclasses
to GST_BASE_PARSE_DRAINING and GST_BASE_PARSE_LOST_SYNC.
https://bugzilla.gnome.org/show_bug.cgi?id=518857
This is useful for parser like flacparse or h264parse which may need to process
some buffers before they can construct the final caps, in which case they may
want to delay pushing the initial buffers until the full and proper caps are
known.
https://bugzilla.gnome.org/show_bug.cgi?id=646341
This makes more sense conceptually, since the bitrate may be used
to estimate a seek position if there's no seek table or just for
duration reporting/estimation if we can't seek. Also, even if the
format is not syncable, we could still seek by pushing data from the
start and using the segment to make downstream clip.
https://bugzilla.gnome.org/show_bug.cgi?id=518857
Also change gst_base_parse_set_format(parse,flags,switch_on) to
gst_base_parse_set_format_flags(parse,flags) which is more in line
with the rest of our API and how the function is used.
Especially drop tag events when flushing to not send them over
and over again.
Should've been in the last commit already but I forgot to call
git rebase --continue...
basesrc's default event handler returns TRUE regardless of whether the
event is handled or not. This fixes the handler to conform with the
expected behaviour (which is to only return TRUE when the event has
actually benn handled). gst_bin_do_latency_func() depended on this
(incorrect) behaviour, and is now modified as well.
(Remaining 1-liner change in gstbasesrc.c is to keep gst-indent happy)
Deal with the hints from gtk-doc and fix the xrefs. Apply a work-around for ()
precedence over @. Move "MT Safe" text to doc body in many places. Trim eol
whitespaces.
If the element gave us caps in a specific order, let's retain that
by intersecting against the template but retaining the order given
by the element.
https://bugzilla.gnome.org/show_bug.cgi?id=617045
gstbytereader.h: In function ‘guint8* gst_byte_reader_dup_data_unchecked(GstByteReader*, guint)’:
gstbytereader.h:249:75: error: invalid conversion from ‘void*’ to ‘guint8*’
gstbytewriter.h: In function ‘gboolean _gst_byte_writer_ensure_free_space_inline(GstByteWriter*, guint)’:
gstbytewriter.h:196:75: error: invalid conversion from ‘void*’ to ‘guint8*’
https://bugzilla.gnome.org/show_bug.cgi?id=645595
Avoid doing unnecessary pad-allocs when on passthrough mode.
If multiple basetransform elements are on a pipeline, they
would do a pad-alloc for each received buffer, each element
would do this, so we would have lots of pad allocs on the
pipeline for a single buffer being pushed through it.
This patch attempts to reduce this amount by avoiding
doing pad-allocs if the element has already done it
after the last pushed buffer. So it will only be allowed
to do a new pad-alloc after it has pushed a buffer, so we get
1x1 pad-alloc and buffer ratio
https://bugzilla.gnome.org/show_bug.cgi?id=642373
If after computing the suggestion with downstream caps we still have
a non-fixed suggestion caps try to intersect with the input caps
of the pad alloc to avoid useless renegotiations.
https://bugzilla.gnome.org/show_bug.cgi?id=642130
Improve the calculation of the duration. When we have no input duration set on
the input buffers stop is set to start and then we end up using a 0 duration in
the average calculation.
Keep track of the earliest allowed timestamp according to the latest
QoS report and drop buffers before that time. Activate this filter
when throttling is enabled. We could later also activate this in the
other QoS cases.
See #638891
Only go into LIVE_WAIT when the are not live_running and only stop waiting when
live_running is TRUE. If we don't loop, we could deadlock when called from
outside of basesrc, such as baseaudiosrc.
Fixes#635785
This can happen for example when downstream proposed new caps, later proposed
the previous caps again which in turn enables passthrough mode in upstream
elements and the wrong-sized buffer appears in an element where the caps
change never happened. Simply allocate a new buffer in this case.
See bug #635461.
Only update the last_stop value when we had a valid stop position for the
clipping or else the clipping code assumes the stop position extends to the end
of the segment, which makes the position reporting return weird values.
Make the _get_caps functions behave like the _get_caps_reffed variants and
remove the _reffed variants. This means that _get_caps doesn't return a writable
caps anymore and an explicit _make_writable() is needed before modifying the
caps.
Unify the different position reporting code paths to make it more
understandable.
Use start_time to get more accurate position reporting in paused.
Fix unit tests for more accurate reporting.
This reverts commit 80727c1177.
This doesn't make sense. gst_data_queue_new_full() is already
documented above. And we need the doc blurb for _new() here.
Use atomic ops to read and write more properties. Taking the preroll lock in get_property
can lock up applications reading the property during preroll.
Because of the awkward refcounting in prepare_output_buffer, we might end up
with writable buffers that point to the same data. Check for those cases so that
we avoid a useless memcpy and keep valgrind quiet.
Fixes#628176
Add a function to retrieve a list of buffers containing the first N bytes from
the adapter. This can be done without a memcpy and should make it possible to
transfer the list to a GstBufferList later.
Make code including GStreamer headers compile with -Wcast-qual by
maintaining const-ness when casting. Also fix function signature of
gst_byte_writer_set_pos(): the byte writer should not be marked as
const.
https://bugzilla.gnome.org/show_bug.cgi?id=627910
Sets up a GST_PKG_CONFIG_PATH variable for use in Makefile.am
(avoids trailing ':' in PKG_CONFIG_PATH used). A useful side
effect of this is also that the PKG_CONFIG_PATH environment
is now logged in the configure output.
When we are handling a buffer and need to allocate an output buffer, handle the
case when downstream suggests us a format that we can't convert the input buffer
to. In that case, check if there is another format available downstream instead
of failing.
Fixes#621332 and see also #614296
If initially pass-through caps are negotiated between a transform element's
sink and src pads, but then the downstream element returns different caps
on a buffer from pad_alloc(), basetransform gets stuck with proxy_alloc=TRUE
even though the upstream peer doesn't accept the caps, causing
gst_pad_peer_accept_caps() to be called on each buffer in _buffer_alloc():
if (!gst_caps_is_equal (newcaps, caps)) {
GST_DEBUG_OBJECT (trans, "caps are new");
/* we have new caps, see if we can proxy downstream */
>> if (gst_pad_peer_accept_caps (pad, newcaps)) {
/* peer accepts the caps, return a buffer in this format */
GST_DEBUG_OBJECT (trans, "peer accepted new caps");
which is taking ~40ms/frame.
This patch does two things. (1) if the buffer returned from pad_alloc() has
new caps, trigger the decision whether to proxy the buffer-alloc to be
revisited, and (2) disable proxy if peer does not accept new caps. (The first
part may not be strictly needed, but seemed like a good idea.)
Note that this issue would not arise except in case of downstream elements
who have on their template-caps, some that would be suitable for pass-through,
but at runtime pick more restrictive caps (for ex, after querying a driver for
what formats it actually supports).
When basetransform received an unsupported caps on pad_alloc
it just returned not-negotiated. This patch makes it query
the allowed caps between his sinkpad and upstream's srcpad
to find a caps to suggest.
This happens when dinamically switching pipeline elements
and upstream pad_allocs with the previous caps that was
being used.
Fixes#614296
Add a new enable-last-buffer property. When false, it disables storing the last
received buffer in basesink::last-buffer. This can be useful in cases where
buffers need to be released asap.
API: GstBaseSink::enable-last-buffer
Retain the last scanned buffer entry and offset, so we can resume buffer
scanning there in case of a typical progressive scan.
Also potentially optimize _copy subsequently occurring in that area.
Allow subclasses to override the acceptcaps function because in some cases a
custom implementation can be much much faster than the default one.
See #621190
Point g-ir-scanner to the .la file of our library, which hopefully
makes it find the right dependencies in all cases (ie. our locally
built libgstreamer and not the system-installed one). This is also
how it's done in Gtk+ and how it's documented in the wiki, see
http://live.gnome.org/GObjectIntrospection/AutotoolsIntegration
Based on patches by Vincent Untz and Alan Knowles.
Fixes#603710.
Our own pkgconfig directory should come first, so that pkg-config uses
the in-tree libgstreamer and not some external one when --pkg=gstreamer-0.10
is passed to g-ir-scanner.
See #603710.
As the headers were broken in 0.10.26 the functions weren't really
usable back then, so we should advertise them as being there only
since 0.10.27.
Spotted by Mart Raudsepp.
When doing pad_allocs, use non-fixed caps suggestions and
try to fixate them before using. This makes possible to
have suggested buffer size with 0 in basetransform just
to signal upstream a renegotiation is needed
Fixes#576234Fixes#609046
Adds that warning to configure.ac
Includes a tiny change of the GST_BOILERPLATE_FULL() macro:
The get_type() function is no longer declared before being defined.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
The functions are called gst_byte_writer_put_{float32|float64}_*() and not
gst_byte_writer_put_{float|double}_*().
Spotted by: Benjamin Otte <otte@redhat.com>
_get_range() is a pad function set by ourselves, therefore we're certain that
the parent is a GstBaseSrc.
Speeds up _get_range by 38%, and the total call by 30%. (valgrind instruction
calls measurements).
Fixes#610246
Adds a new function to GstByteWriter that writes
a constant value to a memory area (aka memset).
Useful for adding padding to buffers.
Also updates .def file and docs.
API: gst_byte_writer_fill()
Updating the segment values must only be done while holding the
STREAM_LOCK and OBJECT_LOCK. This means, reading can be done as
long as one of them is held, not both, which removes some lock-unlock
blocks from performance critical code paths.
Also document, that gst_base_src_set_format() *must* be called in
states <= READY and add an assertion for this. Changing the format
later will completely mess up the segment information.
gst_byte_writer_reset_and_get_buffer wasn't declared
in .h, instead there was _reset_and_get_data_as_buffer.
Replace it with the real function name, that is smaller
and matches gst_byte_writer_free_and_get_buffer
https://bugzilla.gnome.org/show_bug.cgi?id=608726
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
Add a method to perform get_range typefinding that also uses the
uri/location extension as an extra hint. It will first try to call the
typefind functions of the factories that handle the given extension. The result
is that in the common case, we only call one typefind function, which speeds up
the typefinding a lot.
Make sure we take ownership of the buffer early without increasing its refcount
when we go in the collect function. This reduces the amount of copies needed in
order to make the buffer writable in most cases.
In some cases we can avoid allocating a subbuffer and instead simply ref
the buffer. Callers should perform _make_metadata_writable() in all
cases now.
Add a method to install a clipping function that is called when a buffer is
received. Users of collectpads can then perform clipping on the incomming
buffers.
Also retab the header file a little.
See #590265
This allows demuxers to update the segment stop of an already
finished stream. This might be needed if some stream goes to
EOS before the duration of the longest stream is known to properly
set the segment stop of all streams to the same value in the end.
Set the pad flushing and stop the pad task when the initial seek fails
during activation. Avoids racy calls into the _create() function when
BaseSrc::stop() has already run.
Fixes: #603059
Also, fix some misspelled comments.
Rounding errors with the floating point rate could make it so that we
don't end up exactly at the required stepping duration.
Use the segment clipping boundaries, which are not subject to rate
adjustements, instead to detect when we reached the stepping duration.
Add some debug info related to going to the PAUSED state.
Some gcc versions warn about bytewriter writing to memory accessed
via a const guint8 pointer, despite our explicit cast to guint8 *.
Work around that by using an intermediary variable.
Fixes#598526.
When clamping the base time, correctly use 'now', instead of
'-now' - the intent is to prevent 'now-base' ever being
negative, which would cause a position report outside the segment.
Fixes: #602419
Element base_time is a signed quantity, which leads to basesink returning
a position of 0 when dealing with a negative base time - which are quite
legal when clocks (such as the audio clock) are close to 0.
This doesn't manifest in normal pipelines, of course - but can happen
(at least) when manually setting the base time on a pipeline.
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
This avoids having to do the sorting everytime we use typefind
The behaviour of gst_type_find_factory_get_list has subtlely changed
in the sense that the order was previously undefined, whereas now
it returns them sorted by rank and then by name.
The list against which we run the comparefunc will only contain
GstPluginFeature, therefore remove the 6 expensive type checks we do
for every single comparision.
When we quickly switch from PLAYING to PAUSED and back to PLAYING it's possible
in some cases that the task refuses to start, This is because when we go to
PAUSED, we unschedule the clock timeout, which could return UNSCHEDULED when
we're back to PLAYING, causing the task to PAUSE again with a wrong-state.
This patch checks if we are running when we return with an UNSCHEDULED return
value and if we are, try to create a new buffer.
Fixes#597550
The code was previously:
* checking if ret was != OK
* .. but if it was FLOW_STEP, swith it to OK
* .. and then not using ret
Instead we just make it more compact by checking if it's OK or STEP.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
The normal functions are always useful to have for bindings, especially
runtime-created bindings like Seed or new GObject-Introspection based
Python bindings.
Check when we need to touch the metadata of the output buffer after selecting
the output buffer so that we have everything in one place.
Also take flags and timestamp modifications into account.
When we have the same input as output caps, reuse the input caps object. After
the caps refcounting has been sorted out now, we can finally enable this
optimisation.
Without this, we risked:
* Checking the flushing state on an unexisting list
* Not setting the flushing state on pads that had just been added
Partially fixes#590056
Return FALSE in basesrc's default query handler when we get a SEEKING query for
a format that's not the one the source operates in. Previously (ie. before, in
the git version) we would return TRUE in that case and seekable=FALSE, which
is more correct, but causes backwards compatibility problems. (Before that
we would change the format of the query when answering, which was completely
broken since callers don't expect that or check for it). Since the SEEKING
query is a fairly recent addition, not all demuxers, parsers and decoders
implement it yet, in which case any SEEKING query by an application will
just be passed upstream where it will then be handled by basesrc. Now, if
e.g. totem does a SEEKING query for TIME format and we have a demuxer that
doesn't implement the query, basesrc would answer it with seekable=FALSE in
most cases, and totem can only take that as authoritative answer, not knowing
that the demuxer doesn't implement the SEEKING query. To avoid this, we make
basesrc return FALSE to SEEKING queries in unhandled formats. That way
applications like totem can fall back on assuming seekability depending on
whether a duration is available, or somesuch. Downstream elements doing
such queries are likely to equate an unhandled query with a non-seekable
response as well, so this should be an acceptable fix for the time being.
See #584838, #588944, #589423 and #589424.
Clarify byte reader docs a bit: offset is relative to the current
position of the reader, not to the start of the data. Also, the
examples in both the adapter docs and the byte reader docs have
the mask and pattern arguments swapped (see #587561). Spotted
by Carl-Anton Ingmarsson.
Add a pattern scan function similar to the one recently added to
GstAdapter, and a unit test (based on the adapter one).
Fixes#585592.
API: add gst_byte_reader_masked_scan_uint32()
Update design doc with step-start docs.
Add eos field to step done message
when stepping in reverse, update the segment time field.
Flush out the current step when we are flushing.
When we start stepping, store the start/stop values of the segment before we
install new start/stop values for clipping in non-flushing steps.
for non-flushing steps, update the element start time. For flushing steps, it
does not change because running_time does not advance
Make sure we always perform the stop_stepping operations even when we drop
frames.
Note in the docs that a flushing step in PLAYING brings the pipeline to the lost
state and skips the data before prerolling again.
Implement the flushing step correctly by invalidating the current step
operation, which would activate the new step operation.
When a subclass is blocking in _wait_preroll() in the _render method, make sure
we can unlock the subclass and detect this return value from the render method.
Update framestep document, we want to pass the flush flag in the step-done
message.
Add flush flag to the gstmessage.
Update examples to use the new step-done message api.
Implement framestep with playback rates < 0.0 too.
Make start and stop_stepping methods and move their invocation in the right
places.
Perform the atual stepping operation where we have full context about the
timestamps.
Unlock the prerolled frame and recheck if we need to step.
Keep a simple counter for the frames we're about to skip while stepping and
preroll/post step_done when stepping finished.
gst_adapter_masked_scan_uint32 could return values smaller than offset
if the first byte(s) of the mask are 0 and the pattern matches the
beginning of the adapter.
Added examples to documentation of gst_adapter_masked_scan_uint32().
Also added some more masked boundary tests.
Fixes#584118
Add a reasonably optimized new gst_adapter_masked_scan_uint32() function
to scan the adapter for a pattern after applying a mask.
Add some unit tests.
API: GstAdapter::gst_adapter_masked_scan_uint32()
Fixes#583187
Don't use realloc to grow the scratch area because we don't want the memcpy the
old useless data into the new area before we write our new stuff in it.
When a are requested to take a buffer from the adapter that is exactly the
headbuffer, don't make a subbuffer of it but return that head buffer.
Add a unit-test for this new optimisation.
Due to a typo basesink didn't do any emergency rendering of late buffers
if the only buffer ever rendered was the first one with timestamp 0. This
means that in cases where the decoder is very very slow, we'd never see
any buffers but the very first one rendered. Fixes#576381.
When we are not ready to handle a latency query (we are not yet prerolled) we
also don't try to forward the latency event because that might cause unexpected
errors when upstream is not yet linked.
Fix a regression introduced by fix for #567725 in commit
1c7ab4ed4f. We should only call the preroll
function once namely when we did not yet commit the state change.
Add a unit test to check that we call the preroll function when interrupting the
clock_wait (see #567725).
Add a unit test to check that we only call the preroll function once.
While reconfiguring a basetransform element we need also to recheck
the alloc request. Because it's possible that due to caps changes
the proxy_alloc state is not correct anymore.
(Re-commit after discusion with Wim on IRC)
While reconfiguring a basetransform element we need also to recheck
the alloc request. Because it's possible that due to caps changes
the proxy_alloc state is not correct anymore.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Fix documentation for the wait_clock method, rename basesink -> sink
for consistency.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position):
Release the object lock before calling the query convert pad functions
to avoid deadlocks.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_available):
Use the name of the pads instead of a pointer, helps in debugging.
Original commit message from CVS:
* gst/gstdebugutils.c:
Add some ideas, how to make the graph smaller.
* gst/gstutils.c:
Add a comment from a debug session.
* libs/gst/base/gstbasetransform.c:
Log more context.
* libs/gst/controller/gstinterpolationcontrolsource.c:
Indet.
* plugins/elements/gstcapsfilter.c:
Fix typo in docs.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property):
Expose the render-delay as a property so things like appsink can use it
to tweak the synchronisation.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_getrange), (gst_base_transform_chain):
* libs/gst/base/gstbasetransform.h:
Add vmethod that is called before we start the transform and which can
be used to configure the transform, such as dynamic properties.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_acceptcaps):
Revert quick accepcaps attempt, it's not fully equivalent to the old
behaviour and thus causes regressions.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_getcaps), (gst_base_transform_find_transform),
(gst_base_transform_acceptcaps), (gst_base_transform_getrange):
Add beginnings of a more optimized acceptcaps function than the default
core one.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_render_delay):
Changing the render delay changes the latency and so we must post a
latency message.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_finalize):
Avoid costly typechecking for trivially correct pointers.
* gst/gstpoll.c: (gst_poll_wait):
Add some G_LIKELY here and there.
* libs/gst/base/gstadapter.c: (gst_adapter_push):
Add some debug info.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_find_transform), (gst_base_transform_getrange):
If we have a fixate function, call it even if we already have fixed caps
because the subclass might add some caps. Makes audioconvert add a
default channel layout.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_getrange):
Clear the output buffer variable.
Cleanups to the error path in the getrange function.
Fixes#557649.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbytereader.c: (gst_byte_reader_get_data),
(gst_byte_reader_peek_data):
* libs/gst/base/gstbytereader.h:
* win32/common/libgstbase.def:
API: Add gst_byte_reader_get_data and gst_byte_reader_peek_data
to get a pointer to the data at the current position and have
a guaranteed size.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc), (gst_base_transform_suggest):
Protect sink_alloc caps with the sinkpad lock to avoid nasty caps
refcount problems as seen in banshee and maybe also in farsight2.
Remove atomic int now that we need to take the lock anyways.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_default_do_seek),
(gst_base_sink_default_prepare_seek_segment),
(gst_base_sink_perform_seek), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query):
Implement more seeking in pull mode.
Use pad convert functions to convert position to the requested format.
Fix position/duration reporting in pull mode.
Implement position and duration reporting in other formats than time.
* libs/gst/base/gstbasesink.h:
Add member to keep track of when the segment is playing.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek);
Remove duplicated assignment and log a message in failure case.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate_pull),
(gst_base_sink_query):
Query the total number of bytes when activating the pad in pull mode.
Implement duration query in pull mode by using the installed pad convert
function to convert from bytes to the requested format.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_preroll),
(gst_base_sink_flush_start), (gst_base_sink_flush_stop),
(gst_base_sink_event), (gst_base_sink_perform_seek),
(gst_base_sink_loop), (gst_base_sink_pad_activate_pull),
(gst_base_sink_send_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add method to commit the state in subclasses.
Refactor the flush_start and flush_stop code because we need it for
flushing while seeking too.
Implement the beginnings of seeking in pull mode.
Use the segment last_stop field for the pulling offset.
Fix the pause method in pull mode.
Configure the segment to BYTES for pull mode.
API: GstBaseSink::gst_base_sink_do_preroll()
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Update the docs some more.
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
If we pull a buffer with non-trivial caps, suggest those caps with the
max probability.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Small doc update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_pad_getcaps), (gst_base_sink_pad_setcaps),
(gst_base_sink_init), (gst_base_sink_set_blocksize),
(gst_base_sink_get_blocksize), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_needs_preroll),
(gst_base_sink_loop), (gst_base_sink_pad_activate),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add blocksize property and methods to control the amount of data
to pull.
Negotiate first before activating upstream in pull mode so that they can
negotiate themselves.
When we operate in pull mode, we only accept the caps that we
negotiated.
Make the sink go ASYNC to PAUSED, like all other sinks.
API: GstBaseSink::gst_base_sink_set_blocksize()
API: GstBaseSink::gst_base_sink_get_blocksize()
API: GstBaseSink::blocksize
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_set_format), (gst_base_src_query_latency),
(gst_base_src_set_blocksize), (gst_base_src_get_blocksize),
(gst_base_src_set_do_timestamp), (gst_base_src_get_do_timestamp),
(gst_base_src_set_property), (gst_base_src_get_property):
* libs/gst/base/gstbasesrc.h:
Add typechecking in public API functions.
Add methods to control the blocksize in subclasses.
API: GstBaseSrc::gst_base_src_set_blocksize()
API: GstBaseSrc::gst_base_src_get_blocksize()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_send_event):
Forward LATENCY events upstreams so that elements know about the total
pipeline latency. Fixes#555307.
Original commit message from CVS:
* libs/gst/base/gstbytereader.c: (gst_byte_reader_get_uint24_le),
(gst_byte_reader_get_uint24_be), (gst_byte_reader_get_int24_le),
(gst_byte_reader_get_int24_be), (gst_byte_reader_peek_uint24_le),
(gst_byte_reader_peek_uint24_be), (gst_byte_reader_peek_int24_le),
(gst_byte_reader_peek_int24_be):
Use new GST_READ_UINT24_(LE|BE) macros.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Improve position reporting while flushing and other intermediate state
changes. Fixes#553874.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
* plugins/elements/gstcapsfilter.c:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/capsfilter.c:
Fix assertion in basetransform when the subclass chooses not to
allocate a buffer in prepare_buffer(), and make capsfilter error out
cleanly if requested to apply caps that don't completely specify the
buffer. Fixes#551509
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Take new caps ref because our old one might have been gone when the
subclass performs a gst_pad_set_caps() on the srcpad. See #548764.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Use the result from gst_pad_set_caps() instead of assuming the element
always accepted the caps computed by the default negotiate function.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_chain_unlocked),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Improve position reporting in the flushing state.
Also report the position when we are not yet prerolled but we
have a newsegment event. Fixes#543444.
Improve the pull-based negotiation code.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Add testcase for position reporting while flushing in PAUSED and
PLAYING.
* tests/check/generic/sinks.c: (GST_START_TEST):
Update unit-test, we can now query the position as soon as we receive a
NEWSEGMENT event.
Original commit message from CVS:
Based on patch by: Jason Zhao <e3423c at motorola dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object):
When the subclass event handler releases the PREROLL_LOCK, we could be
in the flushing state and we have to ignore the event. Fixes#548394.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
If the element is configured in passthrough mode but the
prepare_output_buffer gave us a new output buffer, discard that buffer
and reuse the input buffer.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc):
Go over the buffer_alloc function again and make sure we always end up
allocating a buffer.
Add some more docs.
Avoid doing pad alloc when we have a pending suggestion because we
cannot yet deal with changing caps in that case. Fixes#547728
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc), (gst_base_transform_suggest):
Don't overwrite the outsize when calculating the expected size of a new
buffer because we still need it in case we cannot process the new
buffer.
When converting the size of the new buffer to an upstream size, actually
use the expected size of the buffer, not some other random value.
Use an atomic int to signal that a new upstream caps suggestion is
available.
When we can convert the current buffer to a new format, check if the
buffer size is of the expected size and allocate a new buffer of the
expected size when this is not the case.
* tests/check/libs/transform1.c: (GST_START_TEST):
remove ifdeffed code from the unit test.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Increase code readability.
Don't try to compare buffer offsets when ther are invalid.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_query_latency), (gst_base_sink_set_render_delay),
(gst_base_sink_get_render_delay), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
* win32/common/libgstbase.def:
Add method to allow sinks to specify additional delay between the sync
times and the actual rendering of the data.
API: gst_base_sink_set_render_delay()
API: gst_base_sink_get_render_delay()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_eos), (gst_base_sink_event):
If we have not seen a buffer before EOS, use the segment values to
report the current position instead of invalid positions.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_transform_caps),
(gst_base_transform_prepare_output_buffer):
Add debug info.
When a buffer is writable, its metadata is also writable so we don't
need to subbuffer (which then makes the buffer not-writable anymore).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_async_enabled),
(gst_base_sink_set_ts_offset), (gst_base_sink_perform_qos):
Add some debug.
Make sure we don't generate invalid QoS messages.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position):
The reported position must always be smaller than the last seen
timestamps (or timestamp + duration for reverse).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position_last), (gst_base_sink_get_position):
Fix position query range checks in reverse playback.
Original commit message from CVS:
Based on patch by: Bjarne Rosengren <bjarne at axis dot com>
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Make sending an EOS event to the basesrc non-blocking even if the
implementation does blocking waits in the create function. This is done
by unlocking the create function when EOS is sent.
Fixes#535218.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
If nothing else can be used, use the last buffer's start time as
the segment's last stop. Fixes bug #534258.
Original commit message from CVS:
Patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Unref events that the GstBaseTransform::event vfunc didn't want to
have forwarded by the base class. Closes a leak in identity.
Fixes bug #446763.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_adjust_time),
(gst_base_sink_wait_clock), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked):
Refactor adjusting the running_time with latency and offset into a
separate method.
When doing clipping, we still want to use the subclass get_times method,
just in case the DURATION or TIMESTAMP are not set.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_start):
Use right error code when typefinding fails, so we can use
the default (translated) error messages.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_start):
When the subclass did not set caps on outgoing buffers, configure the
caps we negotiated on the source pad.
When the typefind helper does not find caps, error out properly instead
of doing things with NULL caps.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (helper_find_peek):
Sort buffer cache list by end offsets. This makes sure that we don't
stop to search for a cached buffer that contains the requested data
too early.
Also read a minimum of 4k bytes instead of 512 bytes as this is a bit
more efficient. Fixes bug #459862.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check the caps of the buffer returned by gst_pad_alloc_buffer() and
fall back to default negotiation in the chain function if the caps
are different from what was requested. Fixes bug #526768.
Original commit message from CVS:
Based on a patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't passthrough buffer allocation too easily if the caps change.
This breaks when working in passthrough mode and upstream changes
it's caps. Fixes bug #526768.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_send_event):
Rearrange the latency query code. We always want to do the upstream
query, even if we are not live so that the upstream elements can get the
latency results too. If we fail doing the query and we are live, we
return TRUE afterwards.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* docs/design/part-buffering.txt:
Fix some typos and set the estimated total for push mode to -1.
* gst/gstquery.c: (gst_query_new_buffering):
Set buffering-left to 0 as we're not buffering by default.
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
Implement BUFFERING query.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer):
Also unset the GAP flag on buffers if we're working inplace but
the element is not GAP-aware.
Mark a comment as FIXME 0.11.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/gstclock.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.c:
* libs/gst/check/gstcheck.c:
Small documentation fixes. Fixes#523978.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop),
(gst_base_sink_get_position_paused):
Add fixme regarding EOS in pull mode.
Fix position reporting in PAUSED for negative rates.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop):
The start segment for reverse playback goes from start to last_stop.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_size):
Print element name with g_warning() if there's a problem
with the unit size.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_do_seek),
(gst_base_src_loop):
Don't update the last_stop position in do_seek, that's the position we
did a seek to.
Read backwards when we have a negative rate.
* tests/check/elements/filesrc.c: (event_func), (wait_eos),
(setup_filesrc), (cleanup_filesrc), (GST_START_TEST),
(filesrc_suite):
Add check for reverse reading.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event),
(gst_base_src_get_range), (gst_base_src_pad_get_range),
(gst_base_src_loop), (gst_base_src_set_flushing),
(gst_base_src_change_state):
Allow sending EOS to the source to make it send out an EOS event from
the streaming thread.
Update docs and deprecate the old NULL/READY shutdown method.
* tests/check/libs/basesrc.c: (GST_START_TEST),
(gst_basesrc_suite):
Add unit test for controlled shutdown.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_perform_seek), (gst_base_src_get_range),
(gst_base_src_set_playing), (gst_base_src_change_state):
Make _wait_playing() not check any variables so that we can call this
function from subclasses. Move the checks elsewhere similar to
_wait_preroll() in basesink.
Add some debugging.
Only signal the LIVE cond when we are going back to PLAYING.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_set_gap_aware):
* libs/gst/base/gstbasetransform.h:
API: Add gst_base_transform_set_gap_aware() to control whether
the element correctly handles GST_BUFFER_FLAG_GAP or shouldn't
get buffers with this flag at all. Fixes#503231.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* gst/gstdebugutils.c:
* gst/gstinfo.c:
* gst/gstutils.c:
* gst/gstutils.h:
* libs/gst/base/gstbasesink.c:
* tools/gst-launch.c:
Change GST_GET_TIMESTAMP into gst_util_get_timestamp and replace all
uses as we don't have HAVE_POSIX_TIMERS in public headers.
Thanks Tim for spotting.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_last_buffer):
Don't hold the object lock when unreffing a buffer because it could
cause a deadlock when the finalize function wants to grab the object
lock too. Fixes#495133.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes#494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query),
(gst_base_src_perform_seek), (gst_base_src_default_event),
(gst_base_src_set_flushing), (gst_base_src_activate_push),
(gst_base_src_activate_pull):
Unify flushing code, remove some old unlock code that is no longer used.
Take the streaming lock when seeking to avoid races. Fixes#492729.
Added some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
Reset last seen position after flushing so that we don't report the old
position anymore.
Original commit message from CVS:
Patch inspired by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_eos),
(gst_base_sink_event):
* libs/gst/base/gstbasesink.h:
Add function to wait for EOS, subclasses can use this to correctly wait
for devices to drain before performing the EOS logic. Fixes#485343.
API: gst_base_sink_wait_eos()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_needs_preroll), (gst_base_sink_chain_unlocked):
When we received EOS and are waiting for when to post the EOS message,
our state is prerolled and we should not return ASYNC.
Reorganize some code paths to implement this behavior.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(gst_sinks_suite):
Add unit test to verify above EOS fix.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event),
(gst_base_sink_get_position):
Don't try to preroll non-async elements after a flush.
Subtract latency form clock times when reporting position.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_query_latency), (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_get_range),
(gst_base_src_pad_get_range), (gst_base_src_loop),
(gst_base_src_unlock), (gst_base_src_unlock_stop),
(gst_base_src_set_flushing), (gst_base_src_set_playing),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Rework the locking of basesrc in a similar fashion to basesink. We
basically have one lock (LIVE_LOCK) protecting the dataflow. This allows
us to handle live sources and semi live ones much better.
Simplify flushing.
Fix unlocking when seeking, shutting down and pausing in live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync),
(gst_base_src_get_range), (gst_base_src_change_state):
Call unlock for live sources so that they can't get stuck in _create and
produce a buffer before they are set back to PLAYING.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
Also initialize the counter that calculates the first timestamp on a
buffer correctly for non-live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_event), (gst_base_sink_query),
(gst_base_sink_change_state):
Simplify latency query.
When not synchronizing, we can report latency without querying the peer
element.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_event), (gst_base_sink_change_state):
Sinks that don't preroll can always be queried for the latency.
Don't post ASYNC start when we are not async.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_set_flushing), (gst_base_sink_query),
(gst_base_sink_change_state):
Latency query is allowed after we are prerolled. Introduce a new flag
for this and stop abusing other variables.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_send_event):
Push OOB events downstream when we get them in send_event. This allows
the application to insert events in the pipeline.
Add some more comments.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_do_sync), (gst_base_src_change_state):
Update docs.
Clean up the timestamping and syncing code for pseudo live sources.
Original commit message from CVS:
* docs/design/part-live-source.txt:
Add docs on how live sources should timestamp.
* libs/gst/base/gstbasesrc.c: (gst_base_src_do_sync):
Add some more debug info.
For subclasses that are live and like to sync, add aditional startup
latency to sync time and timestamps so that we timstamp according to the
design doc.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_init), (gst_base_src_set_do_timestamp),
(gst_base_src_get_do_timestamp), (gst_base_src_set_property),
(gst_base_src_get_property), (gst_base_src_do_sync):
* libs/gst/base/gstbasesrc.h:
Add property to make the basesrc timestamp buffers based on the current
running time.
API: GstBaseSrc::do-timestamp
API: gst_base_src_set_do_timestamp()
API: gst_base_src_get_do_timestamp()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_query):
Protect eos and have_preroll with the OBJECT lock so we don't need to
take the PREROLL lock when querying the latency. Fixes#473846.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_set_async_enabled),
(gst_base_sink_is_async_enabled), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add async property to instruct the sink never to inform the parent about
ASYNC state changes, update docs.
Check argument with g_return_* for the public functions.
API: GstBaseSink::async property
API: gst_base_sink_set_async_enabled()
API: gst_base_sink_is_async_enabled()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop):
Improve debugging.
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_change_state):
Rearrange some code so that we can add support for measuring the
startup latency.
Original commit message from CVS:
* gst/gstmessage.h:
Add some more docs for the messages.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query):
Add some more debugging.
* tools/gst-launch.c: (event_loop):
When interrupting, don't try to set pipeline to PAUSED twice.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Don't send an async_start message during downwards state change if target
state is less than READY
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Work around the brokenness of the event vmethod in basetransform. Prefer
to return TRUE when the subclass returned FALSE (meaning don't forward
the event).
* libs/gst/base/gstbasetransform.h:
Clarify the docs.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_flush),
(gst_adapter_take_buffer):
Fix format string to use all its arguments.
Remove useless >= check on a guint
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
Based on patch by: Antoine Tremblay <hexa00 at gmail dot com>
* libs/gst/base/gstbasesrc.c:
(gst_base_src_default_check_get_range), (gst_base_src_start),
(gst_base_src_activate_push), (gst_base_src_activate_pull),
(gst_base_src_change_state):
Match _start/_stop calls in the activate functions. Remove redundant
_stop call from the state change function. Fixes#356910.
Turn failure DEBUG into ERROR.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_post_message),
(gst_element_dispose):
Use _DEBUG_OBJECT some more.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Avoid typechecks.
* tools/gst-launch.c: (main):
If the toplevel element is not a GstPipeline, it must be put in a
pipeline so that a bus and clock is selected.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_default_query):
JITTER, RATE, and LATENCY query should be handled by the
default case and not by the CONVERT query code.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Check if requested caps are the same as the sinks caps IF
->have_same_caps is TRUE. If they are not, act as if have_same_caps
is FALSE.
This fixes the renegotiation issues stated in #352827.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_do_sync),
(gst_base_sink_preroll_object):
Make sure that our internal state is correct when we commit our state
asynchronously. This solves a race where a state change to PLAYING
could cause the sink to remain blocked in preroll in some situations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_preroll),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Expose logic to wait for preroll so that subclasses such as audiosink
can also use this method.
API: gst_base_sink_wait_preroll()
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/plugins/gstreamer-plugins-sections.txt:
Fix docs some more.
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
* libs/gst/base/gstcollectpads.h:
Documentation updates.
Free queued buffer when removing a pad.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Inform GstSegment of the last stop position in order for the current
segment to have a proper duration if it doesn't have a specific stop
position from which a duration could be calculated.
This bug was noticeable when a non-flushing, non-update new segment was
followed by another segment (all buffers from the new segment were being
dropped).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstcaps.c: (gst_structure_is_equal_foreach),
(gst_caps_merge):
* gst/gstcaps.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
API: Add gst_caps_merge() and use it in basetransform, fixes#345444
in a better way
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Only call downstream buffer_alloc if transform element is passthrough
or always_in_place. Closes#350449.
Original commit message from CVS:
* gst/gst.c:
* gst/gstpad.c: (gst_pad_set_active):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps):
Simplify caps to get rid of duplicates, fixes#345444
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_change_state):
If the parent state change function failed, don't assume we can safely
stop the source, this will be done when the pads are deactivated.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Even if we can't figure out the proper format to request downstream,
call buffer_alloc() downstream with the input parameters without setting
the caps on the srcpad. This will force negotiation in the chain
function.
Closes#350449
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Use OBJECT_LOCK and refcounting to get the pad caps in the
buffer_alloc function because the caps could change while we are
busy with them. Fixes#349105
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked), (gst_collect_pads_pop),
(gst_collect_pads_clear), (gst_collect_pads_flush),
(gst_collect_pads_event), (gst_collect_pads_chain):
When flushing a pad, also clear the queued buffer so that we don't
accidentally use it when we shouldn't.
Fix leaks by inreffing incomming buffer.
Flush out queued buffers in case of errors.
Fixes#347452.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_setcaps):
Extra debug output
* tests/check/libs/gdp.c: (gst_dp_suite):
Take a whack at fixing the ppc compile using a different define to
disable the broken test.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Remove excess g_print()
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_query_types), (gst_base_src_update_length):
Publish supported query types.
Update last_stop field in get_range mode so the position
query works. Fixes#342321.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Always push non-flushing serialized events in the streaming
thread.
