Commit graph

215 commits

Author SHA1 Message Date
Dimitrios Katsaros
a55b9060f8 v4l2: Allow framerate to be large then 100pfs
This limit was arbitrary. We still fixate near 100pfs for compatibility.

https://bugzilla.gnome.org/show_bug.cgi?id=752825
2015-07-25 10:40:51 -04:00
Peter Seiderer
f160625ea6 v4l2src: device sequence/offset correction in case of renegotiation
The v4l2 device restarts the sequence counter in case of streamoff/streamon,
the GST offset values are supposed to increment strictly monotonic, so
adjust the sequence counter/offset values in case of caps
renegotiation.

https://bugzilla.gnome.org/show_bug.cgi?id=745441
2015-04-02 17:40:20 -04:00
Peter Seiderer
866d97fa2c v4l2src: add frame loss detection
In case of v4l2 driver filled offset/sequence values add frame
loss detection (and write a warning message).

Move offset meta data setting and frame loss checking after the
timestamp adjustment code to get proper timestamps for the
warning message.

https://bugzilla.gnome.org/show_bug.cgi?id=745441
2015-04-02 17:40:19 -04:00
Peter Seiderer
f16fe891fb v4l2: use v4l2 capture device sequence counter
Use the v4l2 capture device sequence counter for
setting the GstBuffer offset/offset_end values.

https://bugzilla.gnome.org/show_bug.cgi?id=745441
2015-04-02 17:40:19 -04:00
Thiago Santos
0a945e7099 v4l2src: delay renegotiation until it is likely buffers were reclaimed
Allow renegotiation to happen when buffers have returned after an allocation
query. As the allocation query is serialized, all buffers from the pool
should have returned and we can stop it to create a new one for the
new format

https://bugzilla.gnome.org/show_bug.cgi?id=682770
2015-03-13 18:48:03 +00:00
Nicolas Dufresne
b9992e4347 v4l2: Handle corrupted buffer with empty payload
This allow skipping buffer flagged with ERROR that has no payload.
This is typical behaviour when a recovererable error occured during
capture in the driver, but that no valid data was ever written into that
buffer. This patch also translate V4L2_BUF_FLAG_ERROR into
GST_BUFFER_FLAG_CORRUPTED. Hence decoding error produce
by decoder due to missing frames will now be correctly marked. Finally,
this fixes a buffer leak when EOS is reached.

https://bugzilla.gnome.org/show_bug.cgi?id=740040
2014-11-21 11:29:19 -05:00
Simon Farnsworth
02040d507c v4l2: Clean up interlace support
Rather than try and guess interlace support as part of checking supported
sizes, look for interlace support specifically in its own function.

As a cleanup, use V4L2_FIELD_ANY when probing sizes, which should result in
the driver doing the right thing.

With my capture setup, this gets me the following sample caps:

For 1080i resolution:
video/x-raw, format=(string)YUY2, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)interleaved, framerate=(fraction){ 25/1, 30/1 }

For 720p resolution:
video/x-raw, format=(string)YUY2, width=(int)1280, height=(int)720, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string)progressive, framerate=(fraction){ 50/1, 60/1 }

For 576i/p resolution (both possible at the point of query):
video/x-raw, format=(string)YUY2, width=(int)720, height=(int)576, pixel-aspect-ratio=(fraction)1/1, interlace-mode=(string){ progressive, interleaved }, framerate=(fraction){ 25/1, 50/1 }

This, in turn, makes 576i work correctly; with the old code,
the caps would be interlace-mode=progressive for interlaced video.

https://bugzilla.gnome.org/show_bug.cgi?id=726194
2014-11-01 11:46:13 -04:00
Nicolas Dufresne
b706103fab v4l2: Detect bad drivers timestamps
Even though the UVC driver do a great deal of effort to prevent bad
timestamp to be sent to userspace, there still exist UVC hardware that
are so buggy that the timestamp endup nearly random. This code detect
and ignore timestamp from these drivers, making these camera usable.
This has been tested on both invalid and valid cameras, making sure it
does not trigger for valid cameras.

https://bugzilla.gnome.org/show_bug.cgi?id=732910
2014-09-09 18:50:59 -04:00
Nicolas Dufresne
12a3bdbd09 v4l2src: Ensure internal pool activation
Before we would hit an assertion "'gst_buffer_pool_is_active (bpool)' failed"
if the internal pool was not used to push buffer downstrea, hence not
given to the baseclass.

https://bugzilla.gnome.org/show_bug.cgi?id=732912
2014-07-09 15:26:12 -04:00
Nicolas Dufresne
66519d08b0 v4l2: Cleanup and fix calculation of latency
Calculation of num_buffers (the max latency in buffers) was
up-side-down.  If we can allcoate, then our maximum latency match
pool maximum number of buffers. Also renamed it to max latency. Finally
introduced a min_latency for clarity.
2014-05-25 00:04:44 -04:00
Nicolas Dufresne
82a806e63b v4l2: Replace miss-use of crop meta in favour of proper offset
This moves away from copying information and store everything inside
the GstVideoInfo structure. The alignement exposed by v4l2 api
is now handled using proper offset.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
815c9b7d35 v4l2bufferpool: Acquire cannot return a buffer from another pool
Return a buffer from an otherpool has unwanted side effects that lead to leaks and
prevents deactivating the pool. Instead, we change the _process() API so it can
replace the internal buffer with the buffer from the downstream pool. This implied
moving from _fill() to _create() method in the src.
2014-05-08 15:56:37 -04:00
Nicolas Dufresne
e5ef2db489 v4l2: Fix support for caps without width, height, framerate or format
For format like mpegts, width and height is rarely in the negotiated caps. This
patch fixes failure when setting format, and prevent introducing width, height,
framerate and format to the caps when fixating.

https://bugzilla.gnome.org/show_bug.cgi?id=725860
2014-04-01 14:28:08 -04:00
Nicolas Dufresne
11103c6c47 v4l2: Remove XV support
XV support for v4l2 never became upstream and ended up being
commented out with an undef for a long time now.
2014-03-15 13:54:47 +01:00
Nicolas Dufresne
3cf85c9083 v4l2: Move decide allocation into v4l2object
https://bugzilla.gnome.org/show_bug.cgi?id=720568
2014-01-10 17:13:23 -05:00
Olivier Crête
48caa1712a v4l2: De-duplicate caps probing between src and sink 2013-08-19 13:08:18 -04:00
Sjoerd Simons
8e43c0ec9e v4l2: Optimize negotiation by removing the query filter
As cameras tend to have a quite specific set of capabilities (specific
framerates for each resolution), getting the peer caps filtered by our
probed caps can cause a big increase in the caps size which slows down
things quire a bit.

As for negotiation v4l2 iterates through the caps of the peer to find the
first intersection with the probed caps, getting the fully expanded
intersection of capabilities is not useful.

Using the same testcase as for bug #702632, adding this patch on top of
the patches suggested there speeds up getting the inital frame from
around ~14-15 seconds to around ~3-4 seconds.

https://bugzilla.gnome.org/show_bug.cgi?id=702638
2013-06-19 15:05:25 +02:00
Michael Olbrich
00ffe41e6a v4l2: Don't stop streaming when set_caps is called with unchanged caps
This can happen if other parts of the pipeline are reconfigured.
Stop streaming even for a short amount of time can be quite visible, so it
should be avoided if possible.

https://bugzilla.gnome.org/show_bug.cgi?id=700503
2013-05-20 11:13:18 +02:00
Olivier Crête
b5a9ed20e1 v4l2src: Disable renegotiation in the negotiate method
This way, we don't block the initial negotiation.

Thanks to Jeremy Whiting for doing all the testing.

https://bugzilla.gnome.org/show_bug.cgi?id=695981
2013-04-17 17:04:11 -04:00
Olivier Crête
3340baa374 Revert "v4l2: disable renegotiation"
This reverts commit d1b26e1d59.

This causes the initial negotiation to never happen if a reconfigure
event is received after gst_base_src_start_complete() but before the loop
starts.

https://bugzilla.gnome.org/show_bug.cgi?id=695981
2013-04-17 17:02:08 -04:00
Benjamin Gaignard
e29ab42922 v4l2: Add support of dmabuf
v4l has add a new IOCTL to export a buffer by using dmabuf.
This patch allow to use this new IOTCL if it has been defined in videodev2.h
I introduce a new IO mode (GST_V4L2_IO_DMABUF) to enable this way of working.

https://bugzilla.gnome.org/show_bug.cgi?id=693826
2013-02-19 12:57:07 +01:00
Sjoerd Simons
00eed11d6a v4l2: Re-enable prepare-format emission
With the port to gstreamer 1.0 the prepare-format signal stopped being
emitted. Start emitting this again for use in uvch264src.  While there
change the emission to include the caps for extra flexibility instead of
fource, width, height.

https://bugzilla.gnome.org/show_bug.cgi?id=692042
2013-01-23 21:06:16 -05:00
Tim-Philipp Müller
230cf41cc9 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:07:18 +00:00
Sjoerd Simons
5d1ed54814 v4l2src: handle latency query before setting up the bufferpool
Fixes crash if no bufferpool is set up yet.

https://bugzilla.gnome.org/show_bug.cgi?id=684430
2012-09-20 13:49:42 +01:00
Wim Taymans
e6ce9c226f v4l2: remove unused properties 2012-09-13 10:56:27 +02:00
Wim Taymans
d1b26e1d59 v4l2: disable renegotiation
We can't yet wait for the bufferpool to DRAIN before starting renegotiation so
disable it for now.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=682770
2012-09-11 15:41:10 +02:00
Tim-Philipp Müller
4bb52bbadf docs: gst-launch -> gst-launch-1.0 and ffmpegcolorspace -> videoconvert 2012-08-27 21:20:30 +01:00
Wim Taymans
8eadb9c12c update for query api changes 2012-07-06 11:26:46 +02:00
Wim Taymans
9fd4af2164 v4l2src: improve debug 2012-06-26 12:07:29 +02:00
Sebastian Dröge
982148c07c v4l2src: Update for basesrc API changes 2012-05-01 13:33:46 +02:00
Wim Taymans
a473750350 v4l2: improve timestamp code
Sample the pipeline clock and device clock closer to eachother to reduce jitter.
Don't subtract the frame duration from the timestamp when we can use the device
timestamps.
Assume a delay of 1 frame in read-write mode.
2012-04-25 09:41:46 +02:00
Wim Taymans
46045316ce v4l2: use driver timestamps
Use the drive timestamps for timestamping outgoing buffers.
2012-04-24 12:37:33 +02:00
Wim Taymans
eecb9a96a6 v4l2: Improve buffer management
Query the amount of available buffers when doing set_config(). This allows us to
configure the parent bufferpool with the number of buffers to preallocate.
Keep track of the provided allocator and use it when we need to allocate a
buffer in RW mode.
When we are can not allocate the requested max_buffers amount of buffers, make
sure we keep 2 buffers around in the pool and copy them into an output buffer.
This makes sure that we always have a buffer to capture into. We also need to
detect those copied buffers and unref them when they return to the pool.
2012-04-23 18:10:33 +02:00
Mart Raudsepp
8719375be7 docs: Add Since tag for new GstV4l2Src::prepare-format signal 2012-04-23 11:24:19 +02:00
Sebastian Dröge
deb7cdcdda v4l2src: Rename pre-set-format signal to prepare-format 2012-04-19 09:50:01 +02:00
Youness Alaoui
06d64c7792 v4l2src: Adding a pre-set-format signal
In order to support UVC H264 encoding cameras, an H264 Probe&Commit
must happen before the normal v4l2 set-format. This new signal is
meant to allow an external application or bin to do it.
It also serves to expose the file descriptor used by v4l2src in case
some custom ioctls need to be called.

Conflicts:

	sys/v4l2/Makefile.am
	sys/v4l2/gstv4l2src.c
	sys/v4l2/v4l2src_calls.c
2012-04-19 09:45:49 +02:00
Tim-Philipp Müller
e09ae5736d Use new gst_element_class_set_static_metadata() 2012-04-10 00:51:41 +01:00
Wim Taymans
e310ee8218 caps: improve caps handling
Avoid caps copy and leaks
2012-03-27 16:42:41 +02:00
Wim Taymans
098d8ceae7 v4l2: update for get_param
Remove const from the GstCaps.
Plug some GstStructure leaks
2012-03-27 12:44:46 +02:00
Wim Taymans
01838ff975 v4l2src: don't error in shutdown
Don't log with the ERROR category when we are stopping because we are shutting
down.

Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=672824
2012-03-26 16:00:42 +02:00
Wim Taymans
cfe58e7156 v4l2: fix latency 2012-03-26 15:51:28 +02:00
Wim Taymans
ced47580b7 update for bufferpool changes 2012-03-15 22:11:17 +01:00
Wim Taymans
f3a770a20c update for allocation query changes 2012-03-15 20:37:56 +01:00
Wim Taymans
751fcf035b take padding into account 2012-03-14 19:56:56 +01:00
Wim Taymans
a32d944a38 fix for caps api changes 2012-03-11 19:06:37 +01:00
Wim Taymans
9c789aa434 update for metadata API changes 2012-02-29 17:26:01 +01:00
Sebastian Dröge
10554b271f Merge branch 'master' into 0.11
Conflicts:
	ext/flac/gstflacdec.c
	ext/jpeg/gstjpegenc.c
	ext/pulse/pulsesink.c
	sys/v4l2/gstv4l2src.c
2012-01-25 12:49:11 +01:00
Vincent Penquerc'h
b0608128b1 v4l2src: fix caps leak 2012-01-13 17:25:59 +00:00
Havard Graff
150403ab13 v4l2src: Don't assert when the interface is not implemented.
Simply return FALSE instead.

https://bugzilla.gnome.org/show_bug.cgi?id=667817
2012-01-13 10:07:20 +00:00
Wim Taymans
4b8975f867 update for removed property probe 2011-12-21 11:59:46 +01:00