Add a bunch of vararg getter convenience functions to complement
the vararg setter functions, and a basic unit test. Fixes#534208.
API: gst_structure_get()
API: gst_structure_id_get()
API: gst_structure_get_valist()
API: gst_structure_id_get_valist()
Don't dump hundreds of kB of hexdata into debug logs when converting
taglists containing huge images into a string. Instead, shorten the
buffer data so that the string is still readable and debug logs
stay managable. Can be turned off with GST_DEBUG_OPTIONS=full-tags.
See #584988.
The first time one calls gst_element_factory_make(), gst recreates the plugin
feature and the element factory. As a side effect we ref the class to fill
in detail we already have filled from the registry cache. This patch changes
the behaviour to just update the existing entries. The factory is now attached
to the type and set in gst_element_base_class_init().
Add a GType->GstValueTable hashtable mapping.
Avoid _get_type() multiple times when we can.
Use GSlice for fraction range dynamic memory
Add G_LIKELY when we can
Improve lookup of the value table using the hashtable
Fix some memory leaks shown by the new serialisation/deserialisation unit
test. Split the gst_string_wrap function in gstvalue.c into components and
use them to make gst_string_take_and_wrap, which takes ownership of the
string, avoiding a strdup.
Add some G_LIKELY/UNLIKELY, and clean up some leaks in error paths.
Reword this message a bit to make it clearer what it means, namely that
the state change may have failed for good reasons, but that the element
just failed to post a proper error on the bus. This is not an internal
GStreamer bug, and we really don't need people to flood bugzilla with
bug reports if one such plugin bug ever makes it into the wild.
Add gst_segment_to_position() that converts a running_time to a position in the
segment. A faulty variant of this function is currently used in inputselector
but we'll need it for frame stepping too.
API: GstSegment::gst_segment_to_position()
Use string_warp/unwrap to escape delimiters, otherwise deserialisation fails.
Also move GST_ASCII_IS_STRING to private header to avoid keeping it in sync.
Also use '\0' when terminating a string for better readability.
Update framestep document, we want to pass the flush flag in the step-done
message.
Add flush flag to the gstmessage.
Update examples to use the new step-done message api.
Implement framestep with playback rates < 0.0 too.
Add new STEP event and methods for creating/parsing the event
Update design docs.
Add new STEP_DONE message and method to create/parse.
API: GstEvent::gst_event_new_step()
API: GstEvent::gst_event_parse_step()
API: GstMessage::gst_message_new_step_done()
API: GstMessage::gst_message_parse_step_done()
Fixes minor memory leak in unit tests caused by the recent changes.
Since we're expected to take ownership of the GValue in the structure
field struct here, we need to unset it if we don't use it.
Make gst_tag_list_get_string() return FALSE for NULL strings and
empty strings, and gst_tag_list_get_pointer() return FALSE for
NULL pointers, like we do with dates and buffers.
Fixes#560345.
Also warn if an element or application tries to add a field with an
empty string to a structure (NULL strings are still needed and
allowed though) and do all those checks in the right function.
Fixes#559643.
Use gst_structure_id_empty_new() in combination with GST_QUARK
rather than gst_structure_id_new() when creating message, event,
query and taglist structures. Mostly just because we can.
Use the element START_TIME to keep track of the running time when the pipeline
paused so that it can be used to restore the base_time.
Take the start_time before setting the children to PAUSED so that we can
distribute the start_time to the children.
Add a start_time field and some methods. The start_time will contain the
running_time of when the element last went to paused. This time can be user to
report the position in PAUSED but also to do more correct clipping and
stepping later.
This reverts commit bebfde7502.
This change shouldn't be done in a stable release series as
applications are actually expecting the sender to be an
GstElement. One example is totem.
Unset the running flag after we released the lock for posting the stream-status
message. If we set the running flag to FALSE too early, the join method will
just continue without waiting for the message to be posted, leading to potential
crashes.
When writing a cache chunk fails, we were freeing the node and jump to a final
cleanup which dereferenced a null pointer. Leve freeing the node to the cleanup
code in fail_free_list. (sorry for committing wrong fix before).
When writing a cache chunk fails, we were freeing the node and jump to a final
cleanup which dereferenced a null pointer. Leve freeing the node to the cleanup
code in fail_free_list.
Move MT safety to main description (it does not belong to Return: or Since:
statement). Add a few missing return docs. Downgrade a normal comment froma doc
comment. Fix a doc header to only contain symbol name.
The padding of GstClock is a GstClockTime and not a
gpointer, so adding a pointer requires the padding
size to be changed depending on the pointer size.
Use an union instead.
Fixes bug #582878.
Add a gst_element_lost_state_full() with an extra argument to control
distribution of a new base_time. We will need this for flushing step
operations.
API: GstElement::gst_element_lost_state_full()
dot does not take the head/tail labels into account. For unfixed caps they get
quite large. Double the padding to make it sort of readable in more cases. Also
make normal font bigger and caps-label font smaller to increase our luck.
Possibly fixes GObject class creation/unref race conditions when
creating the last-message string in fakesink for events with
structures that have fields with these enum types.
If deserializing a property fails, check if the value type is a string and if so
attempt to create a bin from the string value. This allows to e.g. specify
audio-sink/video-sink for playbin on gst-launch commandline.
Reuse buffer code for bufferlists. Not sure if this measurably impacts performance
for the simple buffer case, if it does after doing some benchmarks, we can
decouple it later.
Fixes#572285
Buffer lists are a means to manage disjoint buffers as one buffer. It's also
possible to put many of those buffers into a list.
The idea is that when support is added to various elements, we will be able to
more efficiently slice and dice buffers, reduce the amount of memcpy and also
reduce data passing overhead.
The implementation is kept simple on purpose, reusing all of the memory
management features we have for miniobjects and buffers.
Access to the bufferlist object is done with an iterator, which allows for
efficient iteration and modification of the list.
See #572285
When an element lost its state but was busy doing a state change, still post the
async-start message with the base_time reset flag or else we might end up with
an old base_time.
this can happen when a sink is goin async to paused and then a flushing seek is
performed. This would cause the base_time to remain unmodified because the
async-start message was not sent.
Remove the static function set on the TaskPool before _prepare() is called and
allow for assigning a function to a Task when we _push().
Update the examples
Post a stream-status message indicating that a new task was created so that the
application has a chance to change the properties of the task.
Fix unit test to take into account the new ref of the message.
Call the leave_thread callback before we signal the thread performing the _join
so that we can be sure that the listener still has valid info in the callback.
The printf extension mechanism changed in glibc 2.10, and the older
register_printf_function is deprecated. Detect and use the new
mechanism where available.
When its disabled, we poison some symbols to force a build error if they are
used. Dunno how useful this acually is, but we need to disable the poisoning
when we include this ourself. Also don't define some of the dummies, as they
are getting replaced with defines and that creates code that does not compile.
gst_static_pad_template_get_caps () actually returns a reference to the
caps and it's cleaner to unref them after usage. The core will, however,
always hold a reference to the caps so this didn't result in a memory
leak.
And, for our release manager, the in-commit-message keywords
for the previous commit:
API: GST_PARAM_MUTABLE_READY
API: GST_PARAM_MUTABLE_PAUSED
API: GST_PARAM_MUTABLE_PLAYING
API: gst_param_spec_is_mutable
When we get an ASYNC_DONE message when a state change was busy, set the
pending_async_done flag so that after the state change completes, the bin can
check if all async elements are finished. Don't only do this for the bin itself
but for all elements.
This fixes some bins in bins that simulate async state changes by posting ASYNC
messages (such as sdpparse in uridecodebin/playbin2).
Two new log levels to dump FIXMEs into the log and to log data
in form of a hex dump (#578114).
API: GST_CAT_FIXME_OBJECT
API: GST_CAT_MEMDUMP_OBJECT
API: GST_CAT_FIXME
API: GST_CAT_MEMDUMP
API: GST_FIXME_OBJECT
API: GST_MEMDUMP_OBJECT
API: GST_FIXME
API: GST_MEMDUMP
If that block is entered, then start_time becomes GST_CLOCK_TIME_NONE.
Since start_time is invalid, the code will enter the block at line 434 and
new_base_time will be set there.
Move the checks for using an unscheduled entry from the unsafe GstClock to the
SystemClock object so that we can perform the correct locking.
fix a leak and potential deadlock then the async thread fails to start.
Sprinkle some G_LIKELY around because we can.
Keep a counter for the amount of outstanding wakeups that we produce and only
perform a write/read to the control socket when 1 or 0 respectively.
don't poll when waiting for the entries to be unblocked and clear their wakeup
counts, just act on the signal when the wakeup count is 0.
unscheduled entries will clear their wakeup count themselves.
Keep track of when we wakeup the async thread because the list of entries has
changed.
don't try to see if the list changed because we can't really know when one entry
is added multiple times.
Only wake up the async thread when we add an async entry to the head of the list
and the old entry was BUSY.
when an entry being waited on in the async thread is unscheduled, clear the
wakeup queue so we can continue waiting on other entries.
When an entry being waited on in the async thread is unlocked because an earlier
entry was added to the list, set the entry to OK again. This makes sure that
only the entries being waited on have the BUSY flag set and wake up the timer
poll when they are unscheduled.
Yes, 'codec' isn't exactly the best word, but let's be consistent with AUDIO_CODEC
and VIDEO_CODEC (which may be 'raw' formats as well after all). Prerequisite for
bug #576552.
Running configure with e.g. --disable-dst-debug was compiling out the debug
system (ABI break). Now stubs are added and only if one does e.g.
make CFLAGS="-DGST_REMOVE_DISABLED" the symbols are ommitted.
Move the gst_pad_can_link() implementation from gstutils to gstpad and use
gst_pad_link_prepare() to make it work correctly and also check the caps.
Make the broken implementation in gstutils static.
Small cleanups in the _get_fixed_caps() function.
Fixes#575682.
Fixes build with -Werror caused by '_FILE_OFFSET_BITS redefined' warning on
OpenSolaris where _FILE_OFFSET_BITS may be defined both in our config.h
and via stdio.h (#575695).
Bin collects segment-start messages and segent-done messages. it posts a
segment-done message to its parent, once it has received a segment-done for
each segment-start. Imho it should also send a segment-start if it receives the
first segment start and if parent is !=NULL. This is needed for bins in bins,
so that also higher order bins can group segment-starts and segment-dones.
Right now higher order bins will post a segment-done for each segment-done
received.
Long caps fields like enums are ellipsised. If caps are not negotiated, use
head- and taillabel to place them closer to the pads. Use smarter way to indent.
Keep track of when a new callback is installed in the callback and call the new
callback in that case.
Add unit test for checking pad blocking.
Fixes#573823.
When de/activating a pad in pull mode the pad needs to de/activate the
peer pad it is connected to, failure to be able to do this in activation mode
is an error.
However if there is no peerpad, we can still deactivate the pad correctly and
assume the application will deactivate the unlinked peer pad eventually.
Fixes#574163.
This will be mostly useful in all elements that have some kind of internal
seek/index table. Currently almost all of them (or even all of them)
are using a linear search although the used array is already sorted,
wasting some CPU time without good reason.
Fixes bug #573623.
unref and copy functions are sometimes used as function
pointers for example in the case of g_hash_table_new_full
as a GDestroyNotify function.
Currently GstBuffer, GstEvent, GstMessage and GstQuery
define their respective unref and copy functions as
macros, making use of gst_mini_object_unref/copy.
This approach works very well for most cases, except
for some automatically generated bindings (currently Vala),
where the memory management semantics are defined
declaratively.
The possible solutions would be to either convert all
the macros into static inline function, or change the
signature of gst_mini_object_unref to take a void*
instead of a GstMiniObject*.
Fixes bug #572480.
Add a GST_MESSAGE_REQUEST_STATE that can be posted by element when they would
like to have the application change the state of the pipeline. the primary use
case is to pause the pipeline when an audio mixer is mixing a higher priority
stream but it can also be used for other purposes.
Add some docs and a unit test.
Implement the REQUEST_STATE message in gst-launch.
API: gst_message_new_request_state()
API: gst_message_parse_request_state()
API: GST_MESSAGE_REQUEST_STATE
When the target pad disappears (because it was explicitly unlinked or the
element was removed/unreffed) make sure we receive a notify with the unlink
function on the proxy pad and clear the target. We use a simple flag to not do
this and cause deadlocks when the target was changed explicitly using the
ghostpad functions.
Update the unit test because we now unref the target sooner (and correctly).
This tag will list a homepage for the media,
i.e. the artist's or movie's homepage.
This is different to GST_TAG_LOCATION as the latter
lists the original location of the media.
Fixes bug #571227.
The previous commit was bogus, as was the check before. We just point m to the file data,
so neither it nor its members will be NULL. Better check if we have enough data.
Add a property to select the clock type, currently REALTIME and MONOTONIC when
posix timers are available.
Implement the systemclock with GstPoll instead of GCond. This allows us to
schedule timeouts with nanosecond precission on newer kernels and with ppoll
support. It's also resilient to changes to the systemclock because of NTP or
similar.
Add a special timer mode in GstPoll that makes it only use the control socket
with a timeout to schedule timeouts. Also add a pair of methods to wakeup the
timeout thread.
API: GstPoll::gst_poll_new_timer()
API: GstPoll::gst_poll_write_control()
API: GstPoll::gst_poll_read_control()
Remove class-to-interface-struct cast macros which don't work,
don't make sense, and in some cases wouldn't even compile if
used. Removal should be ok seeing that code which uses any of
these is broken and bound to crash. Fixes#565607.
API: remove GST_IMPLEMENTS_INTERFACE_CLASS
API: remove GST_IS_IMPLEMENTS_INTERFACE_CLASS
API: remove GST_URI_HANDLER_CLASS
Allocate every structure that is directly written to the binary
registry with g_malloc0(). Otherwise some parts of it will be
uninitialized (struct padding because of alignment, etc) and
valgrind will complain about it.
Add a new variable that keeps track of the status of the control socket. This
allows us to avoid doing a read() on the control socket when we did not write
anything to it.
Fixes#568438.
Link libgstreamer with $(LIBM) as it uses math functions.
Add a configure check for socket and nsl library and add
them to LIBS if they're found. This is needed on Solaris
for socket() and gethostbyname().
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_set_main_context), (gst_bus_create_watch):
Fix order of members in GstBusSource structure - the first member
must be the parent structure ie. GSource. Should make bus sources
attached to non-default main contexts work in all cases now (ie.
primarily in cases where the callback has a non-NULL user data
argument). Fixes#562170.
* tests/check/gst/gstbus.c: (test_custom_main_context):
Add unit test for the above, based on code by
Justin Karneges <justin at affinix com>.
Original commit message from CVS:
* gst/gst.c:
Create a registry if there is none also when the option for
gst-disable-registry-update has been selected. Fixes#567002
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_wakeup_main_context):
The lock order should be maincontext > OBJECT_LOCK so we need to release
the object lock when waking up the mainloop to avoid deadlocks.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_set_index_func), (gst_bin_set_clock_func),
(gst_bin_change_state_func):
Use an iterator to set the clock and the index so that we can release
the object lock appropriately. Fixes#566393.
Original commit message from CVS:
* gst/gstindex.c: (gst_index_get_type):
Add a debugging category for GstIndex, first little step in making
indexing top-notch.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_pads_activate):
* gst/gstobject.c: (gst_object_dispatch_properties_changed):
* gst/gstutils.c: (gst_pad_proxy_getcaps), (gst_pad_proxy_setcaps),
(gst_pad_add_data_probe_full), (gst_pad_add_event_probe_full),
(gst_pad_add_buffer_probe_full), (gst_pad_remove_data_probe),
(gst_pad_remove_event_probe), (gst_pad_remove_buffer_probe):
Assign debug statements to relevant categories instead of the 'default'
category so they don't get lost in debugging.
Original commit message from CVS:
* gst/gstdebugutils.c:
Add some ideas, how to make the graph smaller.
* gst/gstutils.c:
Add a comment from a debug session.
* libs/gst/base/gstbasetransform.c:
Log more context.
* libs/gst/controller/gstinterpolationcontrolsource.c:
Indet.
* plugins/elements/gstcapsfilter.c:
Fix typo in docs.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_dispose), (gst_bus_get_property),
(gst_bus_wakeup_main_context), (gst_bus_set_main_context),
(gst_bus_post), (gst_bus_source_prepare), (gst_bus_source_finalize),
(gst_bus_create_watch):
Make GstBusSource work with non-default main contexts (#562170).
* tests/check/gst/gstbus.c: (message_func_eos), (message_func_app),
(test_watch), (test_watch_with_custom_context), (gst_bus_suite):
Add test case for GstBusSource with a non-default main context.
* tests/check/libs/.cvsignore:
Ignore more.
Original commit message from CVS:
* gst/gstregistrybinary.c: (unpack_element), (unpack_const_string),
(unpack_string)::
Wrap multi-line macros in G_STMT_{START|END}.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstquark.c:
* gst/gstquark.h:
* gst/gstquery.c: (gst_query_new_uri), (gst_query_set_uri),
(gst_query_parse_uri):
* gst/gstquery.h:
API: Add URI query type. This is useful to query the URI
of a sink/source element and can be used by demuxers that
need to get data from other files.
This query should go upstream by default.
Fixes bug #562949.
* plugins/elements/gstfdsink.c: (gst_fd_sink_query):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_query):
* plugins/elements/gstfilesink.c: (gst_file_sink_query):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_query):
Implement URI query.
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
Don't forward gst_pad_set_caps() on a source ghostpad to its target.
That would cause the ghostpad to emit notify::caps two times (fist
from gst_pad_set_caps() and after from on_src_target_notify()).
Original commit message from CVS:
* gst/gstghostpad.c:
* tests/check/gst/gstghostpad.c:
In a source ghostpad, when caps are changed in the target pad, the
change needs to be reflected in the ghostpad.
Fixes#564863.
