Previously we were checking for opencv dep in 2 different places,
and the checks would vary in terms of how complex and exhaustive
they were.
Move the check into the libs module and reuse the result later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3016>
This field is used to store gbooleans (which are ints) but if it's
a :1 bit depth assigning ints to it changes it's value as the only
valid values are -1 and 0.
Make it a guint instead so the cast would be correct.
```
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/xcb/gstvkwindow_xcb.c:151:25: error:
implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1
[-Werror,-Wsingle-bit-bitfield-constant-conversion]
window_xcb->visible = TRUE;
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5432>
This was wrongly calling the base class method, which unnecessairly took the stream lock, already taken by
handle_frame(). The drain() call in negotiate() would then wait for the output loop to pause, while that loop
is stuck waiting to take the stream lock, thus causing a deadlock.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5521>
This element refactors functionality from gstonnxinference element,
namely separating out the ONNX inference from the subsequent analysis.
The new element runs an ONNX model on each video frame, and then
attaches a TensorMeta meta with the output tensor data. This tensor data
will then be consumed by downstream elements such as gstobjectdetector.
At the moment, a provisional TensorMeta is used just in the ONNX
plugin, but in future this will upgraded to a GStreamer API for other
plugins to consume.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4916>
- Don't try to make the parameters match `GHFunc`. Use a dedicated
callback for `g_hash_table_foreach`.
- Don't try to be clever with buffer memories. We're allocating a full
packet anyway, might as well memcpy and save on a lot of complexity.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5496>
There are a bunch of plugins that you need for webrtc support, and
it's not obvious at all to users which those are.
With this commit, srtp, sctp and dtls options will be auto-enabled if
the webrtc option is enabled.
Requires meson 1.1
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5505>
The v4l2codecs H.265 decoder uses the
GstH265SliceHdr::entry_point_offset_minus1 array so make sure that it is not
freed before decoding the frame.
Before this patch, some H.265 input would segfault in
gst_v4l2_codec_h265_dec_fill_slice_params() when executing the line:
guint32 entry_point_offset = slice_hdr->entry_point_offset_minus1[i] + 1;
Make sure that the array is not freed before using it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5499>
While adding arbitrary tile support, a round up operation was badly
converter. This caused the Y component of the stride to be 0. This
eventually lead to a crash in glupoad preceded by the following
assertion.
gst_gl_buffer_allocation_params_new: assertion 'alloc_size > 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5458>
The caps that were sent by the caps event can be retrieved from the sinkpad
using gst_pad_get_current_caps(). This is more reliable than using cur_caps as
we know exactly which caps upstream selected when the UVC host didn't select a
format, yet.
This further allows to simplify the check, if the uvcsink has to wait for the
caps event before switching to the internal v4l2sink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
The probe passes all events except the EVENT_CAPS. Installing and removing the
probe doesn't provide any additional value.
Install an event function and always handle EVENT_CAPS. Use the caps_changed
field, to decide, if the element has to do anything special on a EVENT_CAPS.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
Move the sanity checks to the beginning of the function. Make the actual effect
of the function more obvious and reset the flags in the end.
This should make it easier to understand what this function is doing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
The probe that installs the buffer probe is already on the correct pad. There is
no need for a separate function to install the probe.
While at it, change the signature of the probe functions to GstPadProbeCallback
to avoid the cast when installing the probes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
The uvcsink calculates the caps for the format that the UVC host selected. The
gst_uvc_sink_parse_cur_caps() sets these caps as cur_caps as a side effect. This
behavior is surprising as cur_caps is later updated to reflect the actually used
caps.
Just return the configured caps to avoid side effects. This makes the function
easier to understand. Update the function name to reflect the new behavior.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
The only job of the event peer probe is to catch the upcoming caps event
and be able to react with the sink change. All other events that are
passing the pad shall be passed and ignored.
Since the probe is a blocking probe, there is no use in returning
with GST_PAD_PROBE_OK on other events. Otherwise the event would just
be blocked.
Since we are handling the probe removal of the probe already in the
event switch, we can remove the second explicit probe removal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4994>
This commit ports functionality from the `rtpsrc` to make the `ristsrc`
work with dynamic payload types.
It adds two properties:
- `caps`
- `encoding-name`
These can be used to make the `ristsrc` receive other payload types than
the MPEG TS one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5422>
Since DXVA does not support some profiles such as HEVC RExt,
vendor specific decoding API is still required.
When decoder is negotiated with d3d11 caps, decoder will convert
semi-planar frame to planar since semi-planar format (e.g.,
DXGI_FORMAT_NV12) is not supported by CUDA/D3D11 interop.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5409>
Use gst_codec_utils_caps_get_mime_codec() in pbutils for codec
strings. That function gives more elaborate RFC 6381 compatible
strings than the helper functions in gstmdphelper.c, such as
"avc1.F4000D".
Remove the helper functions, as they were only used from dashsink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5404>
The interaudiosrc might take buffers of different sizes from the audio adapter,
so keeping metas consistency would be an issue. So the sink now strips the audio
metas away and the src adds them back (for non-interleaved layouts only) when
taking buffers from the adapter.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5324>
Moves outputting frames to a task on the source pad, bringing vtdec in line with vtenc.
This brings possible performance improvements thanks to decoupling queueing new frames from outputting processed ones.
The queue length is limited to `2*DBP` to prevent decoding too far ahead compared to what we're pushing downstream.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5163>
This was easy to trigger when testing with e.g. vtenc ! vtdec ! glimagesink and closing the sink via window button,
causing GST_FLOW_ERROR to be received by the output loop, stopping it with the queue still full. This made the
enqueue_buffer() callback to lock waiting for space in our queue, while handle_frame() was waiting for the internal
VideoToolbox queue to free up, so that VTCompressionSessionEncodeFrame could finish. As the output loop was not
running, both functions waited forever.
Fixed by 1) immediately emptying our queue when GST_FLOW_ERROR is received (like we already did with _FLUSHING)
and 2) unconditionally setting the flushing flag in finish_encoding() when it sees the output loop stopped because
of GST_FLOW_ERROR, so that enqueue_buffer() will immediately discard any new frames coming out of VideoToolbox.
Both of those make sure we never run into the both-queues-full scenario.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5303>
As a short-term solution before full d3d12 rendering feature,
copy decoded d3d12 texture to shared d3d11 texture in order to use
existing various d3d11 implementations such as conversion, resizing,
and videosink.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5356>
There is no need to use DRM dumb pool if buffer to
render is already a DMABuf, just import it and render it.
This fixes a DMAbuf memory leakage when waylandsink downstream
element exports DMABuf while waylandsink is configured to be
DMABuf exporter (drm-device=/drv/dri/card0):
gst-launch-1.0 v4l2src io-mode=4 ! gtkwaylandsink drm-device=/dev/dri/card0
leakage identfied with command:
watch "cat /sys/kernel/debug/dma_buf/bufinfo | grep attached "
Fixes#2729
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5350>
There is no need to use DRM dumb pool if buffer to
render is already a DMABuf, just import it and render it.
This fixes a DMAbuf memory leakage when waylandsink downstream
element exports DMABuf while waylandsink is configured to be
DMABuf exporter (drm-device=/drv/dri/card0):
gst-launch-1.0 v4l2src io-mode=4 ! waylandsink drm-device=/dev/dri/card0
leakage identfied with command:
watch "cat /sys/kernel/debug/dma_buf/bufinfo | grep attached "
Fixes#2729
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5350>
Don't update info's size with the VA image reported data size for single plane
images, since drivers might allocate bigger space than the strictly required to
store the image, but when we dump the buffer as is (using filesink, for example)
the produced stream is corrupted. For multi-plane images video meta is required
to read/write them.
We updated info's size because gstreamer-vaapi did it too, but the reason to
update it there was for uploading and rendering surfaces (commit c698a015).
Furthermore, this patch adds an error message if the allocated data size for the
image by the driver is lesser than the expected because it would be a buggy
driver.
Fixes: #2959
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5308>
Even if decoder is negotiated with CUDA memory feature, if downstream
proposed no buffer pool, assume that the pool size is unknown.
And disable zero-copy if there's no more free output surface.
Or, in case of reverse playback, always copy frames.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5338>
Even if the segmentation feature value is not updated,
the parsed "segmentation_update_map" and "segmentation_temporal_update"
values should not be cleared as it's referenced during lower
level bitstream parsing. Also, don't use assert() in parser
unless it's clearly impossible condition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5334>
If DPB is full already, GstH265Decoder::new_picture() might fail if
subclass uses fixed size picture pool and its size is equal to the DPB
size. Call the new_picture() after DPB is cleared in gst_h265_decoder_dpb_init()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5333>
Issue is that when amc was producing a codec-data buffer, a
GstVideoCodecFrame was being popped off the internal queue. This meant
that the codec-data was being associated with the first input frame and
the second (first encoded buffer) output buffer with the second input
frame. At the end (assuming one input produces one output which seems
to hold in my testing and how the encoder is currently implemented)
there would be an input frame missing and would be pushed without any
timing information. This would lead to e.g. muxers rejecting the buffer
without PTS and failing to mux.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5330>
This is consistent with the librtmp-based old rtmp plugin and ffmpeg.
While some servers require a valid flash-version, others are failing
with a too long or any flash-version at all.
By changing to the same default as in the old plugin and in ffmpeg,
GStreamer will at least behave the same and will work and fail with the
same servers without setting a flash-version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5293>
