When doing a segment seek, the base offset in the new segment
would be increased by segment.position which is basically the
timestamp of the last packet. This does not include the duration
of the last packet though, so might be slightly shorter than the
actual duration of the clip or the requested segment.
Increase the base offset by the segment duration instead when
accumulating segments, which is more correct as it doesn't cut
off the last frame and makes the effective loop segment duration
consistent with the actual duration returned from a duration
query.
In case a segment stop was specified it's also possible that
some data was sent beyond the stop that's necessary for decoding
so the base offset increment should be based on that then and
not on the timestamp of the last buffer pushed out.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4604>
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.
Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.
In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.
One option would be to build all the examples and tests after
gstreamer-full as the tools.
Disable tools build in subprojects too as it will be built at the end of
build process.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
In recent versions of Chrome (M106) a change on their jitter buffer means that
they are very susceptible to PictureID discontinuities.
Then avoid at all cost resetting the PictureID. Moreover, according to
the RFCs for VP8 and VP9 payloads; the PictureID can start off at any
random value. So there is no logical problem of incrementing it here
rather than resetting it, as long as it is a different PictureID.
WebRTC's recent corruption issue:
https://bugs.chromium.org/p/webrtc/issues/detail?id=15101
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4530>
By keeping async to TRUE, a deadlock is avoided where the appsink is
filled with data after a flushing seek but before its PAUSED->PLAYING
state change finishes. If that happens, the appsink is stuck, because
its internal condition variable waits for the appsink to have more room
for data. The basesink's preroll lock is held during this, and it also
tries to acquire that lock during the state change -> deadlock.
By keeping async to TRUE, this flood of data does not happen.
Also, setting the max-buffers property to 1 is unnecessary - the test
runner will anyway detect excess memory usage if it happens.
Other property adjustments turned out to just be redundant.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4200>
Fix the following use:
- upstream sends a video with a rotation tag, say 90°
- upstream switches to another video without rotation
- the second video was still rotated by videoflip
Fix this by resetting the orientation when receiving STREAM_START.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4377>
In order to provide build and provide the jack plugin with the prebuilt
binaries of gstreamer we distribute with releases, we can not depend
on an external dependency nor can we ship plugins linking to libraries
we don't provide.
We can also not provide jack ourselves, as it would likely cause a
mismatch with the jack daemon on the host.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4350>
The previous code would only check if two packets in a row were duplicates. If
not (i.e. a packet is a duplicate of a packet received slightly before) the code
would generate completely bogus FCI because it assumes there were no duplicates
present in the array.
In order to be efficient, just store all received packets and remove the
duplicates just before the FCI is generated once the array of observations have
been sorted by seqnum.
Fixes TWCC usage with moderate to high packet duplication.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4328>
A data offset with an offset smaller than the moof length is wrong
in smooth streaming streams. The samples will not be located and
eventually playback will error out. So compensate assuming data
is in mdat following moof.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3840>
When calculating the seek range for a live stream, use the same hold-back logic
as when choosing a starting segment, including low-latency segments if
enabled. Permits seeking closer to the live edge when re-synching or catching
up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
Add a flag to hlsdemux to enable or disable LL-HLS handling.
When LL-HLS is enabled and an LL-HLS playlist is loaded, use the part-hold-back
threshold to choose a starting segment.
For live streams that aren't LL-HLS, use the provided hold-back attribute, or
fall back to landing 3 segments from the end.
Make the gst_hls_media_playlist_seek() method able to choose a partial segment
within 2 target durations of the end of the playlist when requested.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3883>
The rtpjitterbuffer test drop_messages_interval uses a GstClockTime for
the message drop interval. This property is defined as a guint. On
systems with 64-bit time_t but 32-bit uint, this can cause the
g_object_set function to fail to read the arguments properly.
Fixes: #1656
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3580>
- Based heavily on the existing Qt5 integration however:
- The sharing of OpenGL resources is slightly different
- The integration with the scengraph is a bit different
- Wayland, XCB and KMS have been smoke tested. Android, MacOS/iOS,
Windows may or may not work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3281>
Previously we tried to route an incoming RTCP FB FIR to the correct ssrc
using the "media source" component of the RTCP FB message. However,
according to RFC5104 (section 4.3.1.2) the "media source" SHALL be set
to 0. Instead the ssrc(s) in use are propagated via the FCI data. Now
a specific GstForceKeyUnit event is sent for every ssrc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3292>
in certain ways.
In the case that a test is provided for, the size of the `fmt ` chunk is
changed from 16 bytes to 18 bytes (bytes 17 - 20 below):
```
$ hexdump -C corruptheadertestsrc.wav
00000000 52 49 46 46 e4 fd 00 00 57 41 56 45 66 6d 74 20 |RIFF....WAVEfmt |
00000010 12 00 00 00 01 00 01 00 80 3e 00 00 00 7d 00 00 |.........>...}..|
00000020 02 00 10 00 64 61 74 61 |....data|
00000028
```
(Note that the original file is much larger. This was the smallest sub-file
I could find that would generate the crash.)
Note that, while the same issue doesn't cause a crash in pull mode, there's a
different issue in that the file is processed successfully as if it was a .wav
file with zero samples.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3173>
Update unit test for some mpd cases that were reporting
timestamps including the period start time, while
dashdemux2 expects that it needs to add the period
start time itself.
Fix the tests to not expect the period start time
to be included.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3025>
