Reset last_timestamp_out when applying the output segment
change, to avoid decoder confusion over new timestamp timelines when
a seamless segment change happens.
Move some locks/unlocks to later when they're actually needed.
https://bugzilla.gnome.org/show_bug.cgi?id=734617
This fixes the reverse playback scenario when upstream is not fully
parsing the stream and does not send every keyframe chain separately
with the DISCONT flag on the keyframe.
To explain this, let's suppose we have this stream:
0 1 2 3 4 5 6 7 8
K K K
In most circumstances, the upstream parser will chain in the
decoder the buffers in the following order:
6 7 8 3 4 5 0 1 2
D D D
In this case, GstVideoDecoder will flush the parse queue every time
it receives discont (D) and we will eventually get in the output queue:
(flush here) 8 7 6 (flush here) 5 4 3 (flush here) 2 1 0
In case the upstream parser doesn't do this work, though,
GstVideoDecoder will receive the whole stream at once and will flush
the parse queue afterwards:
0 1 2 3 4 5 6 7 8
D
During the flush, it will look backwards for keyframes and will
decode in this order:
6 7 8 3 4 5 0 1 2
This is the same order that it would receive from upstream if
upstream was parsing and looking for the keyframes, only that now
there is no flushing of the output queue in between keyframes,
which will result in the output queue looking like this:
2 1 0 6 5 3 8 7 6
This will confuse downstream obviously and will play incorrectly.
This patch forces the decoder to flush the output queue every time
it picks a new keyframe to decode, so it will end up decoding 6 7 8
and then flushing before picking 3 for decoding, so the output will
get 8 7 6 before 6 5 3 and the video will play back correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=734441
This prevent implementing allocation query, as the format need to be
known in order to determin the size and number of buffers needed.
Note: This may lead to few regressions that will need fixing
https://bugzilla.gnome.org/show_bug.cgi?id=732288
Fix gst_video_decoder_parse_available() to really parse any pending
source data that is still available in the adapter. This is a memory
optimization to avoid expansion of video packed added to the adapter,
but also a fix to EOS condition when the subclass parse() function
ultimately only needed to call into gvd_have_frame() and no additional
source bytes were consumed, i.e. gvd_add_to_frame() is not called.
This situation can occur when decoding H.264 streams in byte-stream/nal
mode for instance. A decoder always requires the next NAL unit to be
parsed so that to determine picture boundaries. When a new picture is
found, no byte is consumed (i.e. gvd_add_to_frame() is not called)
but gvd_have_frame() is called (i.e. priv->current_frame is gone).
Also make sure to avoid infinite loops caused by incorrect subclass
parse() implementations. This can occur when no byte gets consumed
and no appropriate indication (GST_VIDEO_DECODER_FLOW_NEED_DATA) is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=731974
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Buffer pool set_config() may return FALSE if requested configuration needed small
changes. Reget the config and try setting it again. This ensure we have a configured
pool if possible.
This should allow for more meaningful errors. Dereferencing NULL
is more useful information than dereferencing a random address
happened to be on the stack.
If gst_video_overlay_rectangle_apply_global_alpha is called with
a rectangle with unsuitable alpha, expanding the alpha plane will
fail, and thus lead to dereferencing a NULL src pointer. It's not
certain this will happen in practice, as the function is static
and callers might ensure suitable alpha before calling, but there
is no apparent explicit such check.
Add prologue asserts for proper alpha to explicitely prevent this.
Coverity 1139707
Videodecoder does late renegotiation, it will wait for the next
buffer before renegotiating its caps and bufferpool. It might happen
that downstream element switched from passthrough to non-passthrough
and sent a reconfigure upstream (that caused this renegotiation).
This downstream element will ask the video sink below for the bufferpool
with an allocation query and will get the same bufferpool that
videodecoder is holding, too.
When renegotiating, if videodecoder deactivates its bufferpool it
might be deactivating the bufferpool that some element downstream
is using and cause the pipeline to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=727498
baseparse will reverse each GOP for us already, so the segment events can
be after our keyframe. Make sure to get it and all other relevant sticky
events before starting to decode.
This was a regression introduced by f52fd7a68, where we started using
the stride to encode the dimensions in tiles. This patch simply updates
offset and size calculation as described in the documentation,
part-mediatype-video-raw.txt.
Instead of using extra plane, we encode the number of tiles in x and y in the stride of
each planes (i.e. y_tiles << 16 | x_tiles) and introduce tile_mode, tile_width and
tile_height into GstVideoFormatInfo structure.
https://bugzilla.gnome.org/show_bug.cgi?id=707361
For reverse playback, the segment event will only be pushed when
the first buffer is actually pushed. But for decoding frames and storing
those into the list to be pushed the output_segment.rate value is used
to determine if it is forward or reverse playback.
In case a previous segment event (or none) is in use it will mistakenly
think it is doing forward playback and push the buffers immediatelly and
try to clip buffers based on an old segment (or an uninitialized one, leading
to an assertion)
This patch fixes this by copying the segment earlier if on reverse playback
https://bugzilla.gnome.org/show_bug.cgi?id=721666
And don't assume in other code that set_format() preserves any fields at
all. These assumptions were already made here for fields that were changed
by set_format().
Fixes "Unitialized Scalar Variable" issues reported by Coverity.
Has the added advantage of detecting whether somebody *does* use those
fields (ending up with a invalid address).
https://bugzilla.gnome.org/show_bug.cgi?id=720810
This must only ever be used in caps in combination with a non-system
memory GstCapsFeatures, and where it does not make sense to specify
any of the other video formats. Examples of this would be in gst-vaapi.
This reverts commit 5fcdabd907.
Instead of making it impossible to use the ENCODED format we should
just document that it must not be used for capsfeature-less caps.
Also this commit broke API/ABI.
GST_VIDEO_FORMAT_ENCODED was added to support *extracting* video-related
information (like width, height, framerate,...) from caps.
It is __NOT__ intended to be used as a format field on video/x-raw caps.
So that it avoids to send an allocation query twice.
One from an early call to gst_video_encoder_negotiate from a
subclass, then one from gst_video_encoder_allocate_output_frame.
Which means that previously gst_video_encoder_negotiate was not
clearing the GST_PAD_FLAG_NEED_RECONFIGURE even on success.
Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=719684
... so subclasses can release a frame all the way (also from frame list)
without having to pass through _finish_frame or _drop_frame.
The latter may not be applicable, or may or may not have already
been called for the frame in question.
See https://bugzilla.gnome.org/show_bug.cgi?id=693772
allows configuration of whether GstVideoGLTextureUploadMeta is
added to buffers resulting from a buffer pool. This is sperate
to the caps feature in that an element may want to add the upload
meta itself rather than allowing the buffer pool to.
https://bugzilla.gnome.org/show_bug.cgi?id=712798
We could have allocation query before caps event and even without caps inside
the query. In such cases , the downstream can return a bufferpool object with
out actually configuring it. This feature is helpful to negotiate the bufferpool
with out knowing the output video format. For eg: some hardware accelerated
decoders can interpret the o/p video format only after it finishes the decoding
of one buffer at least.
https://bugzilla.gnome.org/show_bug.cgi?id=687183
This avoids triggering plenty of extra code/methods/overhead downstream when
we can just quickly check whenever we want to set caps whether they are
identical or not
https://bugzilla.gnome.org/show_bug.cgi?id=706600
Either there was a flush before that resets everything anyway,
or resetting would make us lose information we might need if
it's just a segment update.
The subclass will be called with set_format() and there it can drain
if necessary and reset whatever is necessary. This is the same behaviour
as for the video decoder.
This reverts commit 28e1dadbfa.
Incrementing the offset to make the plane aligned causes the image to be
incompatible with what Xv expects. Rather that forcing a memcpy in the
xvimagesink we would like to do adjust the left padding instead.
In the unlikely case that the decoder drops a frame before the first
input frame is outputted, use the input segment (since it wasn't
carried over to the output segment yet)
https://bugzilla.gnome.org/show_bug.cgi?id=702502
Add functions to up/downsample chroma in horizontal and vertical
directions. These functions work in-placeand are meant to be used on the
input/output of the pack/unpack functions.
We have no way of tell the caller of the exact error (e.g. if we're flushing),
so will have to wait until the caller uses API that returns a GstFlowReturn,
for example when pushing this buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=700006
For this release the corresponding GstVideoCodecFrame before
pushing the buffer. The buffer will now be writable unless
the subclass still holds another reference to the buffer or
the frame.
For this release the corresponding GstVideoCodecFrame before
pushing the buffer. The buffer will now be writable unless
the subclass still holds another reference to the buffer or
the frame.
When we get a new buffer, always call the parse function, even if it is a 0
sized buffer. For theora we need to also decode 0 sized buffers.
Ideally we would like to make theoradec be packetized but that fails currently
because of oggdemux and because of the assumptions that the base class makes.
This allows elements to specify a function to upload
a buffer content to a specific OpenGL texture ID. It
could be used by the vaapi elements to provide a way
for eglglessink or WebKit to upload a VA surface to
an GL texture without the respective sinks knowing
anything about VA.
Helps when using dvbsuboverlay in connection with vaapisink
or some other video sink that wants ARGB pixels (dvbsuboverlay
attaches pixels in AYUV format, and we then convert as needed).
Alignment should not be a problem here.
DTS and PTS usually have a non-zero offset between them in MPEG-TS,
so assigning DTS to PTS is almost always wrong. The other, newer
timestamp recovery code does it correctly if we leave it as invalid.
For interlaced vertically subsampled images we need to combine alternating
chroma lines with alternating luma lines. That is line 0 and 2 are combined
with the first line of chroma samples and line 1 and 3 with the second line
of chroma samples.
See also: https://bugzilla.gnome.org/show_bug.cgi?id=588535
The _1_0 suffixed environment variables override the
non-suffixed ones, so if we're in an environment that
sets the _1_0 suffixed ones, such as jhbuild, we need
to set those to make sure ours actually always get
used.
And only return the proportion. The earliest time already can be
retrieved from get_max_decode_time() and by renaming we allow this
to be more extensible in the future.
Add a getter for the QoS proportion and earliest_time to help
subclasses do better estimations based on the proportion.
API: gst_video_decoder_get_qos_info()
https://bugzilla.gnome.org/show_bug.cgi?id=687991
We only allocate 8 bits per component for our temp buffers, which
causes invalid memory accesses if we try to unpack formats that
unpack into a format with 16 bits per component such as e.g. v210.
We don't support blending onto those yet, so just bail out.
This reverts commit e39fbe6b7e.
Looks like we need to pass the full .la file after all in a setup
with libtool, or it might not find the library, e.g. like
ERROR: can't resolve libraries to shared libraries: gstfft-1.0
Conflicts:
gst-libs/gst/audio/Makefile.am
gst-libs/gst/pbutils/Makefile.am
Also see https://bugzilla.gnome.org/show_bug.cgi?id=603710
Monitor for reordered output timestamps, and then avoid oldest DTS
as PTS approach, and try for an oldest PTS as out PTS approach,
if at least all valid PTS available.
Avoids bogus estimating upon sparse available input PTS, and tries
to handle all-keyframe input, or input PTS which are actually DTS.
Hold both the stream and the object lock to modify the output_state,
this way it can be safely modified while hold either one or the other.
Also, only hold the object lock in the query
https://bugzilla.gnome.org/show_bug.cgi?id=684832
... by having some more timestamp tracking in a private frame field.
Not doing so would lead to (a.o.) losing the needed minimum timestamp in
an earlier sent frame.
... rather than to output segment, which will only be set
to current input segment if some output is produced
(coming from non-clipped input).
Also fixup debug message.
Don't try to take STREAM_LOCK on upstream events such as QOS.
Protect qos-related variables with object lock instead. Fixes
possible deadlock when shutting down in certain situations.
https://bugzilla.gnome.org/show_bug.cgi?id=684658
Drain out the decoder when encountering a gap. Needed for DVD 'still'
sequences which consist of a single video frame, and a large gap
while audio plays.
