2 second frame duration is rather unlikely... but if we don't clip
away buffers that far before the segment we can cause the pipeline to
lockup. This can happen if audio is properly clipped, and thus the
audio sink does not preroll yet but the video sink prerolls because
we already outputted a buffer here... and then queues run full.
In the worst case we will clip one buffer too many here now if no
framerate is given, no buffer duration is given and the actual
framerate is less than 0.5fps.
Fixes seeking on HLS/DASH streams, when seeking into the middle of
fragments and having no framerate/buffer duration.
Otherwise we would forward the GAP event without ever providing any caps,
which then would make decodebin expose a srcpad without any caps set. That's
confusing for applications and can lead to all kinds of interesting bugs.
Instead do the same as already is done in GstAudioDecoder, and try to invent
caps based on the sinkpad caps and the caps allowed by downstream and the
srcpad template caps.
https://bugzilla.gnome.org/show_bug.cgi?id=747190
memcmp will blindly compare the reserved fields, as well as any
padding the compiler may choose to sprinkle in GstSegment.
Fixes valgrind complaints in unit tests, as well as some found via
https://bugzilla.gnome.org/show_bug.cgi?id=738216
This makes sure that the element is in the same state before start() is called
the very first time and every future call after the element was used already.
Also it ensure that we always have a clean state before start(), cleaned the
same way in every case.
The stop() vfunc might mess with some of our fields we have just
reset, which could cause memory leaks or invalid state taken over
to later.
Also the stop() vfunc, or anything called until it from another thread,
might want to be able to use the fields that were just resetted and
become confused because of that.
In the decoder we already had a workaround for things like this happening,
this workaround is not needed anymore.
Allows subclasses to do custom caps query replies.
Also exposes the standard caps query handler so subclasses can just
extend on top of it instead of reimplementing the caps query proxying.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
With the new caps query results the caps returned might have extra fields
that are not required by the decoder (framerate for image decoders) and it
causes a regression making, for example, jpegdec reject caps that don't
have framerates.
The accept-caps implementation will do 2 checks:
1) Do subset check with the template caps, making sure all the required
fields that are present on the template are present on the received caps.
2) Do a intersection check with the result of a caps query, making sure
that downstream can accept the fields in the received caps.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
Refactor the encoder's caps query proxying function to a common place
and use it in the videodecoder to proxy downstream restrictions.
The new function is private to the gstvideo lib.
https://bugzilla.gnome.org/show_bug.cgi?id=741263
Reset last_timestamp_out when applying the output segment
change, to avoid decoder confusion over new timestamp timelines when
a seamless segment change happens.
Move some locks/unlocks to later when they're actually needed.
https://bugzilla.gnome.org/show_bug.cgi?id=734617
This fixes the reverse playback scenario when upstream is not fully
parsing the stream and does not send every keyframe chain separately
with the DISCONT flag on the keyframe.
To explain this, let's suppose we have this stream:
0 1 2 3 4 5 6 7 8
K K K
In most circumstances, the upstream parser will chain in the
decoder the buffers in the following order:
6 7 8 3 4 5 0 1 2
D D D
In this case, GstVideoDecoder will flush the parse queue every time
it receives discont (D) and we will eventually get in the output queue:
(flush here) 8 7 6 (flush here) 5 4 3 (flush here) 2 1 0
In case the upstream parser doesn't do this work, though,
GstVideoDecoder will receive the whole stream at once and will flush
the parse queue afterwards:
0 1 2 3 4 5 6 7 8
D
During the flush, it will look backwards for keyframes and will
decode in this order:
6 7 8 3 4 5 0 1 2
This is the same order that it would receive from upstream if
upstream was parsing and looking for the keyframes, only that now
there is no flushing of the output queue in between keyframes,
which will result in the output queue looking like this:
2 1 0 6 5 3 8 7 6
This will confuse downstream obviously and will play incorrectly.
This patch forces the decoder to flush the output queue every time
it picks a new keyframe to decode, so it will end up decoding 6 7 8
and then flushing before picking 3 for decoding, so the output will
get 8 7 6 before 6 5 3 and the video will play back correctly.
https://bugzilla.gnome.org/show_bug.cgi?id=734441
Fix gst_video_decoder_parse_available() to really parse any pending
source data that is still available in the adapter. This is a memory
optimization to avoid expansion of video packed added to the adapter,
but also a fix to EOS condition when the subclass parse() function
ultimately only needed to call into gvd_have_frame() and no additional
source bytes were consumed, i.e. gvd_add_to_frame() is not called.
This situation can occur when decoding H.264 streams in byte-stream/nal
mode for instance. A decoder always requires the next NAL unit to be
parsed so that to determine picture boundaries. When a new picture is
found, no byte is consumed (i.e. gvd_add_to_frame() is not called)
but gvd_have_frame() is called (i.e. priv->current_frame is gone).
Also make sure to avoid infinite loops caused by incorrect subclass
parse() implementations. This can occur when no byte gets consumed
and no appropriate indication (GST_VIDEO_DECODER_FLOW_NEED_DATA) is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=731974
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Buffer pool set_config() may return FALSE if requested configuration needed small
changes. Reget the config and try setting it again. This ensure we have a configured
pool if possible.
Videodecoder does late renegotiation, it will wait for the next
buffer before renegotiating its caps and bufferpool. It might happen
that downstream element switched from passthrough to non-passthrough
and sent a reconfigure upstream (that caused this renegotiation).
This downstream element will ask the video sink below for the bufferpool
with an allocation query and will get the same bufferpool that
videodecoder is holding, too.
When renegotiating, if videodecoder deactivates its bufferpool it
might be deactivating the bufferpool that some element downstream
is using and cause the pipeline to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=727498
baseparse will reverse each GOP for us already, so the segment events can
be after our keyframe. Make sure to get it and all other relevant sticky
events before starting to decode.
For reverse playback, the segment event will only be pushed when
the first buffer is actually pushed. But for decoding frames and storing
those into the list to be pushed the output_segment.rate value is used
to determine if it is forward or reverse playback.
In case a previous segment event (or none) is in use it will mistakenly
think it is doing forward playback and push the buffers immediatelly and
try to clip buffers based on an old segment (or an uninitialized one, leading
to an assertion)
This patch fixes this by copying the segment earlier if on reverse playback
https://bugzilla.gnome.org/show_bug.cgi?id=721666
So that it avoids to send an allocation query twice.
One from an early call to gst_video_encoder_negotiate from a
subclass, then one from gst_video_encoder_allocate_output_frame.
Which means that previously gst_video_encoder_negotiate was not
clearing the GST_PAD_FLAG_NEED_RECONFIGURE even on success.
Fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=719684
