Cea608 (valid) padding removal is available on the input side of ccconverter
or configurable on cccombiner. cccombiner can now configure whether
valid or invalid cea608 padding is used and for valid padding, how long
after valid non-padding to keep sending valid padding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6300>
Memory from gst_adapter_map() could live shorter than the GstMemory that the GstBuffer wraps around it, which in lucky
cases 'just' caused a re-use of the same memory for multiple (potentially still in use!) input buffers, but could easily
end up pointing to an already-freed memory.
Manifested when an AudioToolbox encoder kept getting silence inserted in seemingly random circumstances, turned out
to be the memory being re-used by GStreamer at the same time that the AT API was processing it...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6320>
This will mimic the playbin2 behaviour, which sets the "next" entry to be
NULL.
The biggest impact this has is that when going back to READY the current play
entry will be discarded (instead of being kept around for when you go back to
PAUSED/PLAYING).
Fixes#3371
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6324>
Since commit 4d86f994, when setting an RTSP media both shared and
reusable, streaming cannot be restarted after the first time all the
clients disconnect. That happens because the sockets (unlike
addresses) of GstRTSPStream are not cleared in
gst_rtsp_stream_leave_bin, and on restart sockets and addresses are
not allocated in gst_rtsp_stream_allocate_udp_sockets, and then the
check in create_sender_part fails. Fix this by clearing sockets in
gst_rtsp_stream_leave_bin.
Fixesgstreamer/gst-rtsp-server#113
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6325>
find_slot_for_stream_id() will return a slot which has the request stream-id as
active_stream *or* pending_stream (i.e. the slot on which that stream is
currently being outputted or will be outputted).
When figuring out which slot to use (if any) we want to consider stream-id
which *will* appear on a given slot which isn't outputting anything yet the same
way as if we didn't find a slot yet.
Fixes races when doing intensive state changes
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6270>
With the new copy_opaque system, the corresponding frame is stored in the
picture opaque ref.
This also handles the case where the "regular" opaque might be empty in the
case of "DECODE_ONLY" frames, since it that field is set in `get_buffer2()`
which might not be called for those frames
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6301>
When we're doing a state change from PLAYING to NULL, first we invoke
gst_rtspsrc_loop_send_cmd_and_wait (..., CMD_CLOSE, ...) during
PAUSED_TO_READY which will schedule a TEARDOWN to happen async on the
task thread.
The task thread will call gst_rtspsrc_close(), which will send the
TEARDOWN and once it's complete, it will call gst_rtspsrc_cleanup()
without taking any locks, which frees src->streams.
At the same time however, the state change in the app thread will
progress further and in READY_TO_NULL it will call gst_rtspsrc_stop()
which calls gst_rtspsrc_close() a second time, which accesses
src->streams (without a lock again), which leads to simultaneous
access of src->streams, and a segfault.
So the state change and the cleanup are racing, but they almost always
complete sequentially. Either the cleanup sets src->streams to NULL or
_stop() completes first. Very rarely, _stop() can start while
src->streams is being freed in a for loop. That causes the segfault.
This is unlocked access is unfixable with more locking, it just leads
to deadlocks. This pattern has been observed in rtspsrc a lot: state
changes and cleanup in the element are unfixably racy, and that
foundational issue is being addressed separately via a rewrite.
The bandage fix here is to prevent gst_rtspsrc_stop() from accessing
src->streams after it has already been freed by setting src->state to
INVALID.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6302>
The transport stream only returned the CAPS for the first matching PT entry
from the `ptmap`. Other SSRC with the same PT where not included. For a stream
which bundled multiple audio streams for instance, only the first SSRC was
knowed to the SSRC demux and downstream elements.
This commit adds all the `ssrc-` attributes from the matching PT entries.
The RTP jitter buffer can now find the CNAME corresponding its SSRC even if it
was not the first to be registered for a particular PT.
The RTP PT demux removes `ssrc-*` attributes cooresponding to other SSRCs
before pushing SSRC specific CAPS to downstream elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6119>
And also re-timestamp them with the current buffer's PTS.
Not doing so keeps the timestamps of event packets as
GST_CLOCK_TIME_NONE or the timestamp of the previous buffer, both of
which are bogus.
Making sure that (especially) the first packet has a valid timestamp
allows putting e.g. the NTP timestamp RTP header extension on it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5173>
Parse the speed and scale in the server's response
*before* the range, so that the range start/stop
are swapped (or not swapped) correctly based
on the server's actual chosen values. Otherwise,
the old rate from the segment is used - what the
last seek asked for, but not necessarily what
the server chooses.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6248>
In the situation where playback starts from a keyframe before
the target playback segment, then the first buffers will be
outside the configured segment and gst_segment_to_stream_time()
will return GST_CLOCK_TIME_NONE unconditionally.
If drop-out-of-segment is false, the RTP buffers will not be
dropped, but will be sent witout ONVIF extension timestamps
and given GST_CLOCK_TIME_NONE timestamps on the receiver.
Instead, use gst_segment_to_stream_time_full() to extrapolate
stream time outside the segment so that such buffers still
get assigned their correct timestamps on the receiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6248>
Don't accidentally include the stuffing byte (if present)
into the bottom field size. It should only be included in the
total segment length.
Fixes problems with FFmpeg not rendering the subtitles
with a stuffing byte, giving a "Invalid object location!" error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6250>
Cocoa version of glwindow only checks the preferred size upon window creation. glimagesink sets the size right before
calling gst_gl_window_show(), which might be way after the window is created in some cases. If the size was set too
late, glimagesink on macOS would remain 320x240 unless manually resized.
This change makes sure to resize the existing window when _show() is called.
Curiously, this has always been an issue, but went from manifesting every once in a while to being almost completely
broken once old event loop workarounds were removed and gst_macos_main() was introduced.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6185>
Don't use g_return_val_if_fail() to catch the
open-ended segment or empty segment cases in
gst_segment_to_running_time_full()
g_return_val_if_fail() is for programmer errors,
and can be compiled out with a flag.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6219>
Provide a clock from the source that is a monotonic system clock with
the rate corrected based on the measured and ideal capture rate of the
frames.
If this clock is selected as pipeline clock, then provide perfect
timestamps to downstream.
Otherwise, if the pipeline clock is the monotonic system clock, use the
internal clock for converting back to the monotonic system clock.
Otherwise, use the monotonic system clock time calculated in the above
case and convert that to the pipeline clock.
In all cases this will give a smoother time than the previous code,
which simply took the difference between the driver provided capture
time and the current real-time clock time, and applied that to the
current pipeline clock time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
Otherwise there's a small window between querying the state and doing
the transfer in which a frame could be dropped, and we would then output
the frame right after the dropped one as if it was the dropped frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
In low delay B mode, the P frame is converted as B frame with forward
references. For example, One P frame may refers to P-1, P-2 and P-3 in
list0 and refers to P-3, P-2 and P-1 in list1.
So the num in list0 and list1 does not reflect the forward_num and
backward_num. The vaapi does not provide ref num for forward or backward
so far. In this case, we just consider the backward_num to be 1 conservatively.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
In b_pyramid mode, B frames can be ref and prevPicOrderCntLsb can
be the B frame POC which is smaller than the P frame. This can cause
POC diff bigger than MaxPicOrderCntLsb/2 and generate wrong POC value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
