This causes an assertion and would lead to getting a NULL instead
of a buffer. Without proper checking this would easily lead to a
segfault.
Related to rpth264depay: https://bugzilla.gnome.org/show_bug.cgi?id=737199
type is truncated to 0-31 with "& 0x1f", but right after that it is checks if
the value is equivalent to GST_H265_NAL_VPS, GST_H265_NAL_SPS, and
GST_H265_NAL_PPS (which are 32, 33, and 34 respectively). Obviously, this will
never be True if the value is maximum 31 after the truncation.
The intention of the code was to truncate to 0-63.
After further investigation the previous commit is wrong. The code intended to
check if the type is 39 or the ranges 41-44 and 48-55. Just like gsth265parse.c
does. Type 40 would not be complete.
nal_type is the index for a GstH265NalUnitType enum. There are two types of dead
code here:
First, after checking if nal_type is >= 39 there are two OR conditionals that
check if the value is in ranges higher than that number, so if nal_type >= 39
falls in the True branch those other conditions aren't checked and if it falls
in the False branch and they are checked, they will always also be False. They
are redundant.
Second, the enum has a range of 0 to 40. So the checks for ranges higher than 41
should never be True.
Removing this redundant checks.
CID 1249684
For APP/JPG markers the size is following and we have to skip that. This is
not really a problem unless the marker contains e.g. a preview JPEG or
something else that we might interprete as another marker.
In file included from gstrtpL16depay.h:27:0,
from gstrtp.c:73:
gstrtpchannels.h:154:33: error: 'channel_orders' defined but not used [-Werror=unused-const-variable]
static const GstRTPChannelOrder channel_orders[] =
It's not enough to have timeout or event based SPS/PPS information sent
in RTP packets. There are some scenarios when key frames may appear
more frequently than once a second, in which case the minimum timeout
for "config-interval" of 1 second for sending SPS/PPS is not sufficient.
It might also be desirable in general to make sure the SPS/PPS is
available with every keyframe (packet loss aside), so receivers can
actually pick up decoding immediately from the first keyframe if
SPS/PPS is not signaled out of band.
This patch adds the possibility to send SPS/PPS with every key frame. This
mode can be enabled by setting "config-interval" property to -1. In this
case the payloader will add SPS and PPS before every key (IDR) frame.
https://bugzilla.gnome.org/show_bug.cgi?id=757892
This way we can use -1 as special value, which is nicer than MAXUINT.
This is backwards compatible even with the GValue API, as shown by
a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=757892
Actual code is checking for a NULL terminator and a ';' terminator,
for backward compat, in a chained way that cause all events being rejected.
The proper condition is to reject the events when terminator isn't
in ['\0', ';'] set.
https://bugzilla.gnome.org/show_bug.cgi?id=758151
* use g_list_free_full(), don't iterate elements maually when freeing
* call gst_rtp_*_pay_clear_packet(), don't duplicate its code
* use gst_buffer_unref() to clarify that it is buffers being released,
instead of refering directly to gst_mini_object_unref()
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755277
Use constantDuration to calculate the timestamp of non-first AU in the
RTP packet.
If constantDuration is not present in the MIME parameters, its value
must be calculated based on the timing information from two consecutive
RTP packets with AU-Index equal to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=747881
The payloader didn't copy anything so far, the depayloader copied every
possible meta. Let's make it consistent and just copy all metas without
tags or with only the video tag.
https://bugzilla.gnome.org/show_bug.cgi?id=751774
GstRTSPMedia uses this classification to detect the real payloader
inside a dynpay bin and asserts if it doesn't find it, therefore
it is required
https://bugzilla.gnome.org/show_bug.cgi?id=753325
Initialize the PT to the default value of the codec and check if
it is still the default before declaring the pt to be dynamic or
not when setting the caps.
Also use the PT constants from the rtp lib when possible
https://bugzilla.gnome.org/show_bug.cgi?id=747965
We need a proper caps event from upstream with the full RTP caps as we can't
create caps ourselves from thin air. Fixes usage of rtpstreamdepay after e.g.
a filesrc or any other element that supports pull mode.
https://bugzilla.gnome.org/show_bug.cgi?id=753066
h264parse does the same, let's keep the behaviour consistent. As we now
include the codec_data inside the stream too here, this causes less caps
renegotiation.
The spec says:
When a picture parameter set NAL unit with a particular value of
pic_parameter_set_id is received, its content replaces the content of the
previous picture parameter set NAL unit, in decoding order, with the same
value of pic_parameter_set_id (when a previous picture parameter set NAL unit
with the same value of pic_parameter_set_id was present in the bitstream).
h264parse does the same and this fixes decoding of some streams with 32 SPS
(or 256 PPS). It is allowed to have SPS ID 0 to 31 (or PPS ID 0 to 255), but
the field in the codec_data for the number of SPS or PPS is only 5 (or 8) bit.
As such, 32 SPS (or 256 PPS) are interpreted as 0 everywhere.
This looks like a mistake in the part of the spec about the codec_data.
Need to check that the number of bytes we want to copy from the adapter
actually is available and handle the error case gracefully. This error
may happen if malformed packets are received and we don't have a
complete frame.
https://bugzilla.gnome.org/show_bug.cgi?id=752663
For more optimised RTP packet handling: means we don't
need to map the input buffer again but can just re-use
the mapping the base class has already done.
https://bugzilla.gnome.org/show_bug.cgi?id=750235
For more optimised RTP packet handling: means we don't
need to map the input buffer again but can just re-use
the map the base class has already done.
https://bugzilla.gnome.org/show_bug.cgi?id=750235
endpos variable does not correctly understand in the
4.6.3 GCC version. So compile error appears when we do
compile rtph261pay using jhbuild.
This patch is fixed the compile error in 4.6.3 GCC version.
https://bugzilla.gnome.org/show_bug.cgi?id=751985
Draft 16 of "RTP Payload Format for VP8" states in section 4.2 that:
R: Bit reserved for future use. MUST be set to zero and MUST be
ignored by the receiver.
https://bugzilla.gnome.org/show_bug.cgi?id=751929
gstrtph261pay.c: In function 'gst_rtp_h261_pay_class_init':
gstrtph261pay.c:1003:17: error: variable 'gobject_class' set but not used [-Werror=unused-but-set-variable]
GObjectClass *gobject_class;
Implementation according to RFC 4587.
Payloader create fragments on MB boundaries in order to match MTU size
the best it can. Some decoders/depayloaders in the wild are very strict
about receiving a continuous bit-stream (e.g. no no-op bits between
frames), so the payloader will shift the compressed bit-stream of a
frame to align with the last significant bit of the previous frame.
Depayloader does not try to be fancy in case of packet loss. It simply
drops all packets for a frame if there is a loss, keeping it simple.
https://bugzilla.gnome.org/show_bug.cgi?id=751886
We always pushed one buffer into the adapter, then handled exactly that one
buffer and flushed it from the adapter. Now also don't memcpy() the actual
payload but just attach the input buffer's data to the output buffer.
This code still needs some serious refactoring/rewriting.
Compiling (with gcc-4.9-20150603) produces an error because of an access beyond
the end of an array. This patch fixes the error by initializing the loop
control/array index variable (i) to 1 and returning i - 1 when a match is found.
Also, because the values stored in the array increase in value as the index
increases, the >= test unnecessary, so it is removed.
This depayloader clash with the standard one for H263p. It produces an
H263p stream with a modified header. It uses encoding-name that is the
same as H263p (H263-1998) though the resulting ES is not decodable or
parsable in GStreamer, making it unsuable in dynamic pipeline. This
patch unrank this specialized depayloader since it can only be used in
custom pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=739935
A race condition in the state change function may cause buffers
to be unreffed while they are still used by the streaming thread
in gst_rtp_h264_pay_send_sps_pps() resulting in a crash. Chain
up to the parent class first in the state change function to
make sure streaming has stopped and only then free those buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=741381
Put a 0-byte at the end of the event string. Does not break ABI because
old depayloaders will skip the 0 byte (which is included in the length).
Expect a 0-byte at the end of the event string or a ; for old
payloaders.
See https://bugzilla.gnome.org/show_bug.cgi?id=737591
Both Firefox and Chrome uses VP8 as the encoding in their SDP.
Adding this now defacto standard name removes the need for special
case in SDP parsing code.
https://bugzilla.gnome.org/show_bug.cgi?id=737810
Add fixed payload type for mp2t to template caps as well, so
our output caps match the advertised default pt. Fixes a
regression from 1.2.
There's still something wrong with caps negotiation though,
rtpmp2tpay payload=96 ! fakesink will not output caps with
payload=96.
Use a different variable name to make it clear that we are calculating
the header size.
Correctly check that we have enough bytes to read the header bits. We
were checking if there were 5 bytes available in the header while we
only needed 3, causing the packet to be discarded as too small.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=723595
Similarly to what we did with the DELTA_UNIT flag, this patch
propagates the DISCONT flag to the first RTP packet being used to transfer a
DISCONT buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Downstream elements may be interested knowing if a RTP packet is the start
of a key frame (to implement a RTP extension as defined in the
ONVIF Streaming Spec for example).
We do this by checking the GST_BUFFER_FLAG_DELTA_UNIT flag we receive from
upstream and propagate it to the *first* RTP packet outputted to transfer this
buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=730563
Pre-allocate buffer list of the right size to avoid re-allocs.
Avoid plenty of double runtime cast checks and re-doing the
same calculation over and over again in rtp_vp8_calc_payload_len().
Only call gst_buffer_get_size() once.
Collect buffers to send out in buffer lists instead of
pushing out single buffers one at a time. For HD video
each frame might easily add up to a couple of thousand
packets, multiply that by the frame rate and that's a
lot of push() and sendmsg() calls per second.
A good reason to push out buffers as early as possible is
latency, so we don't accumulate the whole frame in a single
buffer list, but instead push it out in a few chunks, which
is hopefully a reasonable compromise.
