Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
Do not typefind content if the buffers already have caps.
Neccesary for icydemux (#333657), and the right thing to do anyway.
Original commit message from CVS:
Patch by Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_locked_flush), (gst_queue_handle_sink_event),
(gst_queue_set_property):
* plugins/elements/gstqueue.h:
In queue, when EOS is received, if minimum threshold > max_size -
current_level, there is chance that queue blocks forever in conditional item
del wait. This is because the queue is not emptied completely due to minimum
threshold.
Here is another approach. Instead of setting cur_levels to max in EOS, just
zero all minimum threshold levels. This should make sure that queue gives out
all data. When going to READY (stop) state, just reset the original minimum
threshold levels.
Fixes#336336.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_send_cached_events),
(gst_type_find_element_change_state):
* plugins/elements/gsttypefindelement.h:
When typefinding is done in push mode, we should cache
events we receive during typefinding instead of just
dropping them (e.g. newsegment, custom events from
dvdreadsrc etc.) and then send them out once we've
determined the type of the stream (and decodebin
has had a chance to plug in a decoder/demuxer).
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render):
* plugins/elements/gstfilesink.c: (gst_file_sink_render):
Emit RESOURCE_NO_SPACE_LEFT error here as well when
there's no space left on the device.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.h:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_src_event), (start_typefinding),
(stop_typefinding), (gst_type_find_element_handle_event),
(gst_type_find_element_chain),
(gst_type_find_element_chain_do_typefinding):
Use gst_type_find_helper_for_buffer() for chain-based
typefinding.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init),
(gst_type_find_element_set_property),
(gst_type_find_element_get_property):
Deprecate "maximum" property (not only was it only taken into
account for typefinding in push-mode anyway, it also was never
actually possible to set it in the first place because the
property was registered with the numeric property ID for the
"minimum" property). Register "maximum" property correctly,
for the sake of future copy'n'pasters. Remove some cruft
from property get/set functions.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_type_find_helper_get_range() here, so we
can honour the min-probability property and also emit
the signal with the correct probability of the found caps.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
When we get an EOS event and have not found a type yet
(most likely because we had not yet accumulated
TYPE_FIND_MIN_SIZE of data yet), try to determine the
type given the data we have so far. Fixes typefinding
for very short streams again, most notably quicktime
redirections as used on Apple's trailer site (#331701).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_pad_check_pull_range() before _activate_pull()
to avoid unnecessary open/close (see #331690).
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Update src->read_position after a seek when not using mmap.
Fixes#332277, patch by: Renchi Raju <renchi gmail com>
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek):
We can do peeks at non-zero offsets, as long as they
fall within the buffer we have.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
When typefinding is unsuccessful in the chain function, don't
error out immediately. Only error out with NO_CAPS_FOUND if
the amount of data is at least MAX_TYPEFIND_SIZE bytes,
otherwise simply wait for more data so we can try typefinding
again with more data later. Also, don't attempt to typefind
if we have less than MIN_TYPEFIND_SIZE data available. Overall,
this should improve typefinding from network sources where the
size of the first buffer can be somewhat random.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Post TYPE_NOT_FOUND error message when typefinding
is unsuccessful in the activate function as well.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer):
Always prefer an actual return value from a src
pad in place of NOT_LINKED. This means we return
WRONG_STATE when all src pads are WRONG_STATE
instead of NOT_LINKED.
Lock when replacing the last message to prevent
racing with the get_property method.
Add debug output
Original commit message from CVS:
2006-01-26 Julien MOUTTE <julien@moutte.net>
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer): Apply patch from #328715. Tee now
handles pad being NOT_LINKED or in WRONG_STATE.
Original commit message from CVS:
* gst/gstevent.c:
Fix docs typo
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_push_one), (gst_queue_loop):
Do some refactoring. Doesn't actually change functionality,
but makes landing the DRAIN event easier later.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init):
'have-type' signal needs to be G_SIGNAL_RUN_FIRST, as it is the
object method handler that sets the caps on the pad and we want
that to happen before we emit the signal (fixes e.g. feeding a
plain text file to decodebin).
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
(Missed plugins/elements/gstcapsfilter.c in previous commit)
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Set the buffer offset/offset_end to GST_CLOCK_TIME_NONE when using
the single-segment mode.
Original commit message from CVS:
* gst/gst.c: (init_post):
Init tags stuff and some other things before loading
any static plugins (there may be other static plugins
than just the GStreamer ones, and they may want to
register their own tags or formats or whatever, and
preferably without segfaulting).
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Print at least a warning in the debug logs if we drop a
query just because we don't know how to adjust the value
in the particular format.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding):
Catch the special case where we are operating chain-based,
but the downstream peer pad has no chain function. Emit a
custom error message in this case instead of letting the
core generate one implying that this is some sort of core
bug. It's not, it just means that whatever got plugged
into the pipeline downstream when we announced the type
can only operate pull-based, while our source can only
operate push-based (e.g. http://foo/bar.mov ! qtdemux ! ...)
Error string has not been marked for translation yet, as
it probably needs some more work first.
(gst_type_find_element_get_best_possibility):
Add helper function to find the best of all available
found possibilities that qualify given the min. threshold.
(gst_type_find_element_handle_event):
Fix the case where we get an EOS while still in TYPEFIND
mode (we want to chose the best of all possible types,
not just the first type that happens to be in our unsorted
list of possible types).
(gst_type_find_element_chain):
Make sure we return GST_FLOW_ERROR when we errored out
in stop_typefinding(); also, don't just find the best of
all found type entries and then use the last examined
type entry, but actually use the best entry.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (free_entry),
(gst_type_find_element_chain):
Now that we're not leaking factories, make sure we keep references
to them while we need them.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek),
(gst_type_find_element_chain):
Fix leaking element factories in typefinding.
Fix problem where we forgot about a probable type on non-seekable
files, and thus later mis-typefound it.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
document core plugins in a separate document just like all the
others
rename these plugins to something starting with core
Original commit message from CVS:
* gst/gst.c:
* plugins/elements/Makefile.am:
* plugins/elements/gstelements.c:
* plugins/elements/gstqueue.c:
move queue from core to the elements plugin
ç
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* plugins/elements/Makefile.am:
* plugins/elements/gstcapsfilter.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
* plugins/elements/gstidentity.c:
* plugins/indexers/Makefile.am:
do CVS surgery and related build fixery to move elements
and indexers in a new gstreamer/plugins directory, out of the
gst/ directory
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
* Makefile.am:
don't run checks if we don't have check
* common/check.mak:
remove the registry when running make torture
* docs/gst/gstreamer-sections.txt:
remove second multiply
* gst/gstqueue.c: (gst_queue_loop):
fix a compile warning when disabling debug
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/base/Makefile.am:
* gst/check/Makefile.am:
* gst/elements/Makefile.am:
* gst/net/Makefile.am:
update LDFLAGS use some more
Original commit message from CVS:
* gst/elements/Makefile.am:
* gst/elements/gstfakesink.c: (gst_fake_sink_state_error_get_type):
* gst/elements/gstfakesrc.c: (gst_fake_src_data_get_type),
(gst_fake_src_sizetype_get_type), (gst_fake_src_filltype_get_type),
(gst_fake_src_init), (gst_fake_src_prepare_buffer),
(gst_fake_src_alloc_buffer), (gst_fake_src_get_size):
* gst/elements/gstfakesrc.h:
* gst/gstqueue.c: (queue_leaky_get_type):
correctly fix GEnumValues so that nick is the short lowercase
dashed tag
* tools/gst-inspect.c: (print_element_properties_info):
also show the nick, since it's useful to use from parse_launch
syntax
Fixes#322139
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* gst/elements/gstfdsrc.c: (_do_init), (gst_fdsrc_class_init),
(gst_fdsrc_init), (gst_fdsrc_dispose), (gst_fdsrc_set_property),
(gst_fdsrc_uri_get_type), (gst_fdsrc_uri_get_protocols),
(gst_fdsrc_uri_get_uri), (gst_fdsrc_uri_set_uri),
(gst_fdsrc_uri_handler_init):
* gst/elements/gstfdsrc.h:
Port fd:// URI handler from 0.8 to fdsrc
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesrc.c (gst_fake_src_create): It's not an
error if the user selected "no clock" as the clocking method.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): New test for buffer
timestamps with live capture.
* gst/elements/gstfakesrc.c (gst_fake_src_create): If the datarate
is 0 but we are a live source, timestamp the buffers using the
element's clock.
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfilesink.c (gst_file_sink_start)
(gst_file_sink_stop): New functions, replace the state change
handler.
(gst_file_sink_class_init): Hook up the start and stop functions.
(gst_file_sink_base_init): Don't set the state change handler any
more. It was a bit ugly too, being set from here...
(gst_file_sink_get_property, gst_file_sink_set_property):
Cleanups...
(gst_file_sink_set_location): More robust check that doesn't call
GST_STATE. Ugggggg.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_class_init):
Fix some typos.
* gst/gstqueue.c: (gst_queue_loop):
Don't assume a miniobject that isn't a buffer is an
event (it could be that there is a refcounting
problem somewhere and the pointer is stale and
refers to an already destroyed miniobject).
Original commit message from CVS:
* docs/manual/advanced-position.xml:
Update seek example and explanations to current 0.9 API.
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Remove FIXME comment now that the found caps
are unreffed.
Original commit message from CVS:
2005-10-31 Andy Wingo <wingo@pobox.com>
* Boo!
* gst/gstqueue.c (gst_queue_chain): Fix downstream leaky mode.
* gst/gstobject.c (gst_object_dispatch_properties_changed): No
need to serialize property notifications on GLib 2.8. GLib 2.6 has
the possibility of deadlocks here if code calling notify() or
set() has a lock that can be taken in another notify handler (ABBA
with class lock and e.g. python GIL state lock).
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init):
Don't leak class.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_loop):
An EOS event marks the queue as completely filled.
Original commit message from CVS:
* gst/gstbus.c:
Doc fix.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop):
Fix potential deadlock when QUEUE_LOCK is taken before STREAM_LOCK.
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
Use fseeko() and ftello() if available. When falling back on
lseek() to get the current offset, fflush() first to make sure
everything is up-to-date and we get the right offset.
Original commit message from CVS:
* docs/design/part-segments.txt:
More docs.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Correctly set caps, even on the subbufer.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
* configure.ac:
correctly make conditionals
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
fix typo causing fdsrc not to build
Original commit message from CVS:
* configure.ac:
check for some headers
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
don't compile fdsrc without sys/socket.h
* gst/indexers/Makefile.am:
* gst/indexers/gstindexers.c: (plugin_init):
don't compile fileindex without mmap
Original commit message from CVS:
* gst/elements/gstfakesink.c: (gst_fake_sink_render):
* gst/elements/gstfakesrc.c: (gst_fake_src_create):
Beautify 'last-message' output: print 'none' for buffer timestamps
and durations if none is set; improve alignment with next messages.
Original commit message from CVS:
* gst/elements/gstfakesrc.h:
* gst/elements/gstfilesrc.c: (gst_file_src_create_read):
* gst/elements/gsttypefindelement.c:
fix some signedness
* gst/elements/gstfilesink.c: (gst_file_sink_render):
I wonder if this could actually write +2GB files before
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
Flush before seeking.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_buffer):
* gst/elements/gstfilesink.c: (gst_file_sink_event),
(gst_file_sink_render):
Some more debugging info.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
No need to prerol after receiving EOS.
* gst/elements/gstfakesink.c: (gst_fake_sink_event):
* gst/elements/gstfakesrc.c: (gst_fake_src_event_handler):
* gst/elements/gstidentity.c: (gst_identity_event):
Print events more verbosely.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_do_push), (gst_tee_handle_buffer):
Let's not iterate pads we're not interested in, it avoids getting
sky-high refcounts on sinkpad.
Original commit message from CVS:
2005-09-28 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesrc.c (gst_base_src_unlock): Comment a bit in
lieu of real docs...
* gst/elements/gstfdsrc.c: Cleaned up a bit.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_init), (gst_tee_do_push):
* gst/gstutils.c: (intersect_caps_func), (gst_pad_proxy_getcaps),
(link_fold_func), (gst_pad_proxy_setcaps):
Leak fixes, the fold functions need to unref the passed object and
_get_parent_*() returns ref to parent.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init):
Make sync property settable from subclass.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Set sync to FALSE by default.
Original commit message from CVS:
* check/gst/gstevent.c:
* gst/elements/gstfakesink.c:
* gst/elements/gstfakesink.h:
remove the sync property from fakesink.
has the side effect of setting sync TRUE
for fakesink, which is a change. Anyone who knows how
to fix this nicely in a GObject-y way, feel free.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST), (states_suite):
Add a sleep to ensure elements have a chance to start their
pad tasks before shutdown. Reduces racy test results.
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Time out the select every now and then to check for shutdown.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_prepare_output_buf),
(gst_base_transform_handle_buffer):
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
Remove the requirement for sub-classes to call the parent
implementation of prepare_output_buffer with a wrapper function.
* gst/gsttaglist.h:
* gst/gsttagsetter.h:
Fix #define wrapper
Original commit message from CVS:
* check/gst-libs/controller.c:
Header include fix.
* gst/base/gstbasetransform.c:
(gst_base_transform_default_prepare_buf),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
Some more basetransform changes and fixes to enable sub-classes
that modify buffer metadata only.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_init), (gst_capsfilter_transform_ip),
(gst_capsfilter_prepare_buf):
If the output pad has fixed allowed caps and input buffers
don't have any, set the fixed caps on outgoing buffers.
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
Original commit message from CVS:
Various fixes for unseekable, unmmapable, and non-normal files, so that
fallback to read() rather than mmap() works.
Allow newsegment events with start == end, so that cases where that's
correct work (e.g. filesrc on a zero-size file).
Original commit message from CVS:
add a source plugin description field, to represent the source
module this plugin is a part of. By default GST_PLUGIN_DEFINE
will set it to PACKAGE, which is automake's idea of the name of
the source project.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* gst/elements/gstfilesrc.c: (gst_mmap_buffer_init),
(gst_file_src_map_region):
Set READONLY flag on mmap'ed buffers, otherwise
gst_buffer_make_writable() won't work properly (#314708).
Original commit message from CVS:
2005-08-28 Andy Wingo <wingo@pobox.com>
* gst/gstutils.h (GST_BOILERPLATE_FULL): Prototype instance_init
as having two arguments instead of just one. Allows superclasses
to access information on subclasses -- see the terrible for() loop
in gtype.c:g_type_create_instance for the reason why. All callers
changed.
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.
* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.
* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.
* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.
* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.
* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.
* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
Original commit message from CVS:
* check/generic/states.c: (GST_START_TEST):
Make sure all tasks are stopped.
* check/gst/gstbin.c: (GST_START_TEST):
Unref after usage for proper valgrinding.
* gst/gstpad.c: (gst_pad_finalize), (gst_pad_stop_task):
Really wait for the task to stop before destroying the
mutex.
* gst/gstqueue.c: (gst_queue_sink_activate_push),
(gst_queue_src_activate_push):
Small cleanups. Don't stop the task when we did not start
it.
* gst/gsttask.c: (gst_task_get_type), (gst_task_init),
(gst_task_func), (gst_task_cleanup_all), (gst_task_set_lock),
(gst_task_get_state), (gst_task_start), (gst_task_pause),
(gst_task_join):
* gst/gsttask.h:
Protect the stream lock with the object lock.
Disallow setting the stream lock when running.
Add cleanup_all to wait for the threadpool to finish.
Remove code to autoallocate a mutex if none was provided.
Add _join() to wait for a task to stop.
Protect the thread pool with a global lock.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_transform_size), (gst_base_transform_getcaps),
(gst_base_transform_setcaps), (gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
use gboolean return values and pointers to size so we can use the
full GST_BUFFER_SIZE range (guint) for buffer sizes
use GstPadDirection for transform_caps
* gst/base/gstbasetransform.h:
rename get_size to get_unit_size since that's what it is
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_caps):
use GstPadDirection for transform_caps
* gst/gstbuffer.c: (gst_buffer_new_and_alloc):
* gst/gstutils.h:
cleanup and debugging
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Remove extra parameter to debug output
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_activate_push):
Fix seek event handling.
* gst/gstpipeline.c: (gst_pipeline_change_state):
* gst/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_src_activate_push):
Don't start the src pad task on FLUSH_STOP if the pad
isn't linked.
Debug changes.
Original commit message from CVS:
* check/Makefile.am:
* check/gst/gstevents.c: (GST_START_TEST), (event_probe),
(test_event), (timediff), (gstevents_suite), (main):
I wrote a test!
* docs/design/part-seeking.txt:
Spelling correction
* docs/gst/tmpl/gstevent.sgml:
Docs updates.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Treat a buffer-without-newsegment the same as a receiving
a newsegment not in time format, and disable syncing to the clock
with a warning.
* gst/gstbus.c: (gst_bus_set_sync_handler):
Assert if anyone tries to replace the existing sync_handler for bus,
as only the owner should be setting it.
* gst/gstevent.h:
Have a fixed set of custom event enums with events identified by
their structure name (as in 0.8), rather than a free-for-all
allowing collisions between enum values from different plugins.
* gst/gstpad.c: (gst_pad_class_init):
Docs change.
* gst/gstqueue.c: (gst_queue_handle_sink_event):
Handle out-of-band downstream events from the sending thread.
Original commit message from CVS:
2005-08-04 Andy Wingo <wingo@pobox.com>
* gst/elements/gstcapsfilter.c: Reimplement using basetransform,
fixes buffer_alloc proxying among other things.
* gst/base/gstbasetransform.c:
* gst/base/gstbasetransform.h:
Revert patch to gstbasetransform from 7-28 removing
delay_configure.
* gst/base/gstbasetransform.h (GstBaseTransformClass.get_size):
* gst/base/gstbasetransform.c (gst_base_transform_get_size):
Semantics changed, should return not the size of the output buffer
but the byte size of a buffer with a given caps.
* gst/base/gstbasetransform.c (gst_base_transform_getcaps): Better
debug object.
(gst_base_transform_configure_caps): Don't set out_size here: (in,
out) are not the pad caps until setcaps finishes.
(gst_base_transform_buffer_alloc): Proxy the buffer_alloc for the
not-in-place case as well. Deal with changing from in-place to
not-in-place within calling pad_alloc_buffer. Still a bit
concerned about the overhead here...
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_have_type), (gst_type_find_element_init),
(stop_typefinding), (gst_type_find_element_handle_event),
(gst_type_find_element_chain), (gst_type_find_element_getrange):
* gst/elements/gsttypefindelement.h:
Set caps on all outgoing buffers, not just the first one.
Original commit message from CVS:
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_have_type),
(gst_type_find_element_check_set_buffer_caps),
(gst_type_find_element_init), (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_chain), (gst_type_find_element_getrange):
* gst/elements/gsttypefindelement.h:
Set caps on first outgoing buffer when we've found the type.
Original commit message from CVS:
* configure.ac:
Use AC_SYS_LARGEFILE, which will set _FILE_OFFSET_BITS=64
and _LARGEFILE_SOURCE in config.h as required. Do not
export those flags in our .pc files any longer (#142209).
Remove unused GST_DISABLE_OMEGA_COTHREADS stuff.
* gst/elements/gstfilesink.c: (gst_file_sink_class_init),
(gst_file_sink_do_seek), (gst_file_sink_event),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
Redo seek/tell calls with large file support in mind; add some
debugging messages; add log message that tells us when large
file support is unavailable or not enabled for some reason.
* gst/elements/gstfilesrc.c: (gst_file_src_class_init):
Add log message that tells us when large file support
is unavailable or not enabled for some reason.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small additions.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_activate_push), (gst_base_sink_activate_pull):
* gst/base/gstbasesink.h:
discont values are gint64, handle the math correctly.
* gst/base/gstbasesrc.c: (gst_base_src_loop):
Make the basesrc report error if the source pad is not linked.
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_src_activate_push):
Make queue collect data even if the srcpad is not linked.
Start pushing out data as soon as it is linked.
* gst/gstutils.c: (gst_element_unlink), (gst_flow_get_name):
* gst/gstutils.h:
Added gst_flow_get_name() to ease error reporting.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start):
* gst/base/gstbasesrc.h:
Add a gboolean to decide when to push out a discont.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query),
(gst_queue_sink_activate_push), (gst_queue_src_activate_push),
(gst_queue_set_property), (gst_queue_get_property):
Some cleanups.
* tests/threadstate/threadstate1.c: (main):
Make a thread test compile and run... very silly..
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_init), (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_get_property):
* gst/gstqueue.h:
Propagate GstFlowReturn more intelligently upstream and output
an ERROR/EOS when streaming stopped due to fatal error.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
2005-07-15 Andy Wingo <wingo@pobox.com>
* gst/elements/gstidentity.c (marshal_VOID__MINIOBJECT): Write our
own marshalling function for the handoff signal. Properly type the
buffer as a buffer. Fixes some warnings. Should do a more general
solution.
(gst_identity_class_init): Plug into the right marshaller.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
Original commit message from CVS:
* configure.ac:
make GST_ERROR_CFLAGS overridable and re-enable Werror
* docs/faq/cvs.xml:
add a note about error CFLAGS
* docs/gst/tmpl/gstfakesrc.sgml:
* gst/elements/gstfakesrc.c:
comment out some unused code
* gst/gst.c: (split_and_iterate):
* gst/registries/gstlibxmlregistry.c: (load_pad_template),
(load_feature):
plug some memleaks
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_filesink_render):
Simplify code so that we don't have to handle short
writes and return GST_FLOW_ERROR if an error occured.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
Original commit message from CVS:
* gst/elements/gsttee.c: (gst_tee_chain), (gst_tee_loop),
(gst_tee_sink_activate):
Core takes STREAM_LOCK for us now.
Original commit message from CVS:
2005-06-23 Jan Schmidt <thaytan@mad.scientist.com>
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
Don't restart typefinding on a discont.
* gst/gstelement.c: (gst_element_set_state):
Debug spelling fix.
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_send_event):
Allow changing mode of an active pad.
Debug output fixes.
* gst/registries/gstlibxmlregistry.c: (load_feature):
Don't cast a static pad template to a normal pad template.
Original commit message from CVS:
Added support for live sources and other elements that
cannot do preroll.
Updated design docs, added live-source design doc.
Implemented live source functionality in basesrc
Fix error condition in _bin_get_state()
Implement live source handling in -launch.
Added check for live sources.
Fixed case in GstBin where elements were changed state
multiple times.
Original commit message from CVS:
* gst/elements/gstcapsfilter.c: (gst_capsfilter_class_init),
(gst_capsfilter_set_property): Allow NULL as possible value
for filter_caps property, indicating GST_CAPS_ANY.
Original commit message from CVS:
* gst/elements/gstfakesrc.c: (gst_fakesrc_create):
fix debug output
* gst/schedulers/Makefile.am:
use libgst prefix
* gstreamer.spec.in:
fix spec for it
Original commit message from CVS:
2005-06-08 Andy Wingo <wingo@pobox.com>
* gst/gstutils.c: RPAD fixes all around.
(gst_element_link_pads): Refcounting fixes.
* tools/gst-inspect.c:
* tools/gst-xmlinspect.c:
* parse/grammar.y:
* gst/base/gsttypefindhelper.c:
* gst/base/gstbasesink.c:
* gst/gstqueue.c: RPAD fixes.
* gst/gstghostpad.h:
* gst/gstghostpad.c: New ghost pad implementation as full proxy
pads. The tricky thing is they provide both source and sink
interfaces, since they proxy the internal pad for the external
pad, and vice versa. Implement with lower-level ProxyPad objects,
with the interior proxy pad as a child of the exterior ghost pad.
Should write a doc on this.
* gst/gstpad.h: s/RPAD/PAD/, s/RealPad/Pad/.
(gst_pad_set_name, gst_pad_set_parent): Macros removed, use
gst_object API.
* gst/gstpad.c: Big changes. No more stub base GstPad, now all
pads are real pads. No ghost pads in this file. Not documenting
the myriad s/RPAD/PAD/ and REALIZE fixes.
(gst_pad_class_init): Add properties for "direction" and
"template". Both are construct-only, so they can't change during
the life of the pad. Fixes properly deriving from GstPad.
(gst_pad_custom_new, gst_pad_custom_new_from_template): Gone. For
derived objects, just set properties when creating the objects via
g_object_new.
(gst_pad_get_parent): Implement as a function, return NULL if the
parent is not an element.
(gst_pad_get_real_parent, gst_pad_add_ghost_pad)
(gst_pad_remove_ghost_pad, gst_pad_realize): Removed.
* gst/gstobject.c (gst_object_class_init): Make name a construct
property. Don't set it in the object init.
* gst/gstelement.c (gst_element_add_pad): Don't allow adding pads
with UNKNOWN direction.
(gst_element_add_ghost_pad): Remove non-orthogonal API. Replace
with gst_element_add_pad (e, gst_ghost_pad_new (name, pad)).
(gst_element_remove_pad): Remove ghost-pad special cases.
(gst_element_pads_activate): Remove rpad cruft.
* gst/gstbin.c (gst_bin_change_state): Use gst_pad_get_parent to
catch the pad's-parent-not-an-element case.
* gst/gst.h: Include gstghostpad.h.
* gst/gst.c (init_post): No more real, ghost pads.
* gst/Makefile.am: Add gstghostpad.[ch].
* check/Makefile.am:
* check/gst/gstbin.c:
* check/gst/gstghostpad.c (test_ghost_pads): Check that linking
into a bin creates ghost pads, and that the refcounts are right.
Partly moved from gstbin.c.
Original commit message from CVS:
* gst/elements/gstcapsfilter.c: (gst_capsfilter_set_property):
Free existing caps if the capsfilter changes. Add a FIXME about
setting those caps on the pads.
* gst/gstutils.c: (gst_element_get_compatible_pad), (ghost_up):
Before adding a ghost pad to a parent bin, check that there isn't
already one for the element on the bin. Prevents infinite recursion
when using decodebin in parse pipelines. Andy says he'll rewrite the
way this works anyway, so ignore the hack.
Original commit message from CVS:
2005-06-02 Andy Wingo <wingo@pobox.com>
* gst/elements/gsttypefindelement.c (do_pull_typefind): Query the
file size, pass it on to the type find helper.
* gst/base/gstbasesrc.c (gst_basesrc_do_seek): Set the
segment_start and segment_end properly according to the seek
method. Segment_end is still a bit flaky because offset can be
negative for CUR and END cases, but it takes -1 as an "unset"
value.
Original commit message from CVS:
* gst/elements/gstidentity.c: (gst_identity_event),
(gst_identity_transform), (gst_identity_get_property):
Protect last_message property as it is accessed from
multiple threads.
Original commit message from CVS:
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_event):
Remove old pieces of code
Flushing the queue in an upstream event is a very bad idea.
Original commit message from CVS:
2005-05-26 Andy Wingo <wingo@pobox.com>
* gst/gstminiobject.c (gst_value_mini_object_collect): Use
gst_value_set_mini_object so as to add a ref on the object (which
will be removed when the value is unset).
* gst/elements/gstfakesink.c (gst_fakesink_class_init): Fix signal
arg type in ::handoff.
* gst/gstelement.c (gst_element_change_state): Also deactivate
pads in READY->NULL, just in case the element didn't make it to
PAUSED. Wingo tested, Wim approved.
Original commit message from CVS:
* gst/gstbin.c: (bin_element_is_sink), (has_ancestor),
(bin_element_is_semi_sink), (append_child), (gst_bin_change_state):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_link_prepare),
(gst_pad_link), (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_send_event), (gst_pad_start_task):
* gst/gstqueue.c: (gst_queue_init), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_sink_activate), (gst_queue_src_activate),
(gst_queue_change_state):
* gst/gstqueue.h:
Fix state changes for non sinks. We now change sinks, then elements
with unconnected srcpads, then the rest.
More efficient queue unlocking in flush and state changes.
Set the pad activate mode even if it does not have an activate
function.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_basesrc_activate):
Don't go in pull mode for non-seekable sources.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init),
(gst_type_find_element_dispose), (gst_type_find_handle_src_query),
(free_entry), (stop_typefinding),
(gst_type_find_element_handle_event), (find_peek),
(gst_type_find_element_chain), (do_pull_typefind),
(gst_type_find_element_change_state):
Allow typefinding (w/o seeking) in push-mode, simplified version
of what was in 0.8.
* gst/gstutils.c: (gst_buffer_join):
* gst/gstutils.h:
gst_buffer_join() from 0.8.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_basesink_finish_preroll),
(gst_basesink_chain_unlocked), (gst_basesink_activate):
* gst/gstminiobject.c: (gst_mini_object_get_type),
(gst_mini_object_free):
* gst/gstpad.c: (gst_pad_accept_caps), (gst_pad_query),
(gst_pad_push), (gst_pad_push_event):
* gst/gstqueue.c: (gst_queue_change_state):
Don't queue buffers in basesink when we are flushing.
Unref buffer when flushing in basesink.
Flush queue when going to READY
Unref buffer when _push() returns an error.
Don't free MiniObject instance when refcount is incremented
in _finalize() so that we can recover objects.
Original commit message from CVS:
* gst/elements/Makefile.am: Remove some elements that don't
need to be in the core (or even exist at all).
* gst/elements/gstaggregator.c:
* gst/elements/gstaggregator.h:
* gst/elements/gstmd5sink.c:
* gst/elements/gstmd5sink.h:
* gst/elements/gstmultifilesrc.c:
* gst/elements/gstmultifilesrc.h:
* gst/elements/gstpipefilter.c:
* gst/elements/gstpipefilter.h:
* gst/elements/gstshaper.c:
* gst/elements/gstshaper.h:
* gst/elements/gststatistics.c:
* gst/elements/gststatistics.h:
* po/POTFILES.in: Remove above files.
