Fix up videorate test for latest videotestsrc changes: just check for
the important bits in the negotiated caps, not for exact equality with
our filter caps. Also don't leak the videorate element in the test.
The only difference between the two unit tests right now is,
that the decodebin2 test resets the element to READY before trying
to reuse it instead of NULL. decodebin2 guarantees to be reusable
without going back to NULL.
This tests seeking on an adder that has a normal and a live source connected.
Wheter the current behavior is the desired one needs to be discussed still
(see #586033)
Be even less restrictive in what we accept for .srt timestamps when
typefinding and parsing subrip subtitles and add a unit test for
the 'new' format. Fixes#585197.
If one side has a preference for a particular sample rate or set of sample rates, we
should honour this in the caps we advertise and transform to and from, so that elements
actually know about the other side's sample rate preference and can negotiate to it
if supported. Also add unit test for this.
Add some padding to the callbacks structure just to be safe.
Remove the now invisible marshaller methods from the docs.
Fix a comment in the unit test.
Based on pacth by Martin Samuelsson <martin dot samuelsson at axis dot com>
Fixes#571299.
Add gst_app_sink_set_callbacks() to install a set of callbacks. This is a more
performant alternative to connecting to the signals.
Add a unit test for appsink.
Clean up some of the appsink docs.
API: GstAppSink::gst_app_sink_set_callbacks()
Original commit message from CVS:
* tests/check/elements/speexresample.c: (test_pipeline):
Make unit test again faster to prevent timeouts with valgrind.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (GST_START_TEST):
Make the unit test a bit faster to prevent timeouts, especially
with valgrind.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (element_message_cb),
(eos_message_cb), (test_pipeline), (GST_START_TEST),
(speexresample_suite):
Add pipeline unit tests for testing all supported formats with
up/downsampling and different in/outrates.
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/speex_resampler_wrapper.h:
Fix bugs identified by the testsuite.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_start),
(gst_speex_resample_get_unit_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_resample_check_discont), (gst_speex_resample_process),
(gst_speex_resample_transform):
* gst/speexresample/gstspeexresample.h:
Rewrite timestamp tracking to make it more robust and guarantee
a continous stream.
* tests/check/Makefile.am:
* tests/check/elements/speexresample.c: (setup_speexresample),
(cleanup_speexresample), (fail_unless_perfect_stream),
(test_perfect_stream_instance), (GST_START_TEST),
(test_discont_stream_instance), (live_switch_alloc_only_48000),
(live_switch_get_sink_caps), (live_switch_push),
(speexresample_suite):
Add unit tests for speexresample based on the audioresample unit tests.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect), (handle_buffer),
(gst_sub_parse_change_state):
* gst/subparse/gstsubparse.h:
* tests/check/elements/subparse.c: (GST_START_TEST):
Add support for subtitle files with UTF-8 BOM at the beginning
by simple stripping it from the first line before passing it
to any parsing code. Fixes bug #555257 and playback of files
created by Gnome Subtitles.
Original commit message from CVS:
Based on a patch by: xavierb at gmail dot com
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
* tests/check/elements/subparse.c: (GST_START_TEST):
Make the detection of the used subtitle a bit less strict
for srt subtitles. Fixes bug #555607.
Original commit message from CVS:
* configure.ac:
* gst/subparse/Makefile.am:
* gst/subparse/gstsubparse.c:
* gst/subparse/samiparse.c:
* tests/check/elements/subparse.c:
Rework last change, so that we build subparse, but just disable the
sami parse functionality, if we're configured to not use xml. In the
tests only the sami test is disabled now.
Original commit message from CVS:
* tests/check/elements/audioresample.c: (setup_audioresample),
(fail_unless_perfect_stream), (test_perfect_stream_instance),
(test_discont_stream_instance):
Now that GstBaseTransform is 'fixed' ... remove cruft from tests.
Add debugging for coherence.
Original commit message from CVS:
* tests/check/elements/gdpdepay.c: (gdpdepay_suite):
* tests/check/pipelines/streamheader.c: (streamheader_suite):
Enable unit tests on PPC again as the bugs are now fixed.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(structure_has_fixed_channel_positions),
(gst_audio_convert_transform_caps):
Allow up to 11 positioned channels now that audioconvert can handle
this but add no default positions for > 8 channels.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some unit tests for the above change: Test conversion of
11 positioned channels to stereo and the other way around, test
conversion of 15 unpositioned channels in different ways.
Original commit message from CVS:
* tests/check/elements/vorbisdec.c: (vorbisdec_suite):
Remove wrong_channels_identification_header unit test as we now
support 7 (and more channels).
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (parser_state_init),
(gst_sub_parse_format_autodetect), (handle_buffer):
* gst/subparse/gstsubparse.h:
* tests/check/elements/subparse.c: (test_tmplayer_style3b):
Limit duration to a maximum of five seconds for tmplayer format where
we can guess the duration only from the timestamp of the next line of
text. We don't want to show a text for eternities just because nothing
else is being said for a while.
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add another test that checks if conversion between standard 1 and 2
channel layouts with and without positions set is working.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
Allow non-standard 2 channel layouts.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some tests for converting and remapping non-standard 1 and 2
channel layouts.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* tests/check/elements/audioresample.c:
(live_switch_alloc_only_48000), (live_switch_get_sink_caps),
(live_switch_push), (GST_START_TEST):
Add unit test for the latest basetransform negotiation changes.
See bug #526768.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/audioresample/gstaudioresample.c: (gst_audioresample_init):
Let audioresample use the buffer allocation of basetransform instead
of it's own stuff.
* tests/check/elements/audioresample.c: (alloc_only_48000),
(GST_START_TEST), (audioresample_suite):
Add unit test for the recent basetransform bugfix, where upstream
changes caps to something that can't be passed through anymore.
Original commit message from CVS:
Based on a patch by: Tim-Philipp Müller <tim.muller at collabora co uk>
* gst/audioconvert/audioconvert.c: (audio_convert_prepare_context):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_parse_caps),
(structure_has_fixed_channel_positions),
(gst_audio_convert_transform_caps):
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_fill_matrix):
Add support for more than 8 channels and NONE channel layouts. For
more than 8 channels no channel conversion is supported yet, only
format conversions are supported. Fixes bug #398033.
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST), (audioconvert_suite):
Add some unit tests by Tim for checking the NONE channel layouts
and more than 8 channels and add some more unit tests for channel
conversions.
Original commit message from CVS:
* gst/subparse/samiparse.c: (handle_start_sync),
(end_sami_element), (characters_sami):
Remove trailing, leading and double whitespaces.
Correctly timestamp buffers and output the last buffer too.
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add a simple unit test for SAMI parsing.
Original commit message from CVS:
* tests/check/elements/subparse.c: (do_test),
(test_tmplayer_style3b), (subparse_suite):
Add unit test for the tmplayer variant from bug #530962.
Original commit message from CVS:
Based on patch by: Tomasz Sałaciński <tsalacinski gmail com>
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* tests/check/elements/subparse.c: (test_microdvd_with_italics),
(subparse_suite):
Forward slashes at the beginning and end of a line also signify
italics (Fixes: #518162).
Original commit message from CVS:
* tests/check/Makefile.am:
Fix CFLAGS to also pull in the gstcheck cflags from AM_CFLAGS.
* tests/check/elements/audiorate.c: (do_perfect_stream_test):
* tests/check/elements/playbin.c:
* tests/check/libs/mixer.c: (test_element_interface_supported),
(gst_implements_interface_init):
* tests/check/libs/rtp.c: (GST_START_TEST):
Fix various assignment type mismatches.
Original commit message from CVS:
* tests/check/elements/playbin.c: (test_sink_usage_video_only_stream),
(test_suburi_error_unknowntype), (test_suburi_error_invalidfile),
(test_suburi_error_wrongproto), (test_missing_primary_decoder):
* tests/check/libs/cddabasesrc.c: (GST_START_TEST), (GST_START_TEST),
(cddabasesrc_suite):
Don't use GST_PLUGIN_DEFINE_STATIC, it's not portable and will be
deprecated in the future (see #498924).
Original commit message from CVS:
Patch by: Robin Stocker <robin dot stocker at gmx dot ch>
* gst/subparse/gstsubparse.c: (gst_sub_parse_data_format_autodetect):
Some .srt files start with chunk number 0 and not chunk number 1,
recognise and accept those as well (fixes#502497).
* tests/check/elements/subparse.c: (srt_input), (srt_input0),
(test_src):
Add unit test for the above.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir@gmail.com>
* tests/check/elements/audioconvert.c: (verify_convert):
Add check to make sure that the out caps have a channel layout
set on them where they should have one.
Original commit message from CVS:
* tests/check/elements/decodebin.c: (test_text_plain_streams):
Make sure the pipeline really operates in push mode as it should
in this case.
Original commit message from CVS:
* tests/check/elements/libvisual.c:
Test all libvisual plugins, not just the first one; this reproduces
bug #450336 quite easily. Looks like a problem with the 'jess'
visualisation.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/libvisual.c:
Add basic libvisual test case in an attempt to reproduce bug #450336.
Doesn't reproduce that bug, but some other crasher instead (invalid
free), at least with make elements/libvisual.forever and the bumscope
plugin on x86-64/gutsy. Leaving test disabled for now.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func):
* tests/check/elements/volume.c: (GST_START_TEST):
Revert the latest change: floating point samples are allowed to
have any value, not only values in the range [-1,1]. Thanks to Andy
Wingo for noticing.
Also fix processing of int32 samples with volumes > 4 by making the
unity value smaller which prevents overflows.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func),
(volume_process_double), (volume_process_double_clamp),
(volume_process_float_clamp):
Correctly clamp float/double samples in the [-1.0,1.0] range to
prevent weird effects.
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
Add unit tests for all samples types that had none before.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
Debug output fixes.
* tests/check/elements/audiorate.c: (do_perfect_stream_test),
(GST_START_TEST):
Change the number of buffers used; 500 is too many and leads to
timeouts.
Original commit message from CVS:
* gst/audiorate/gstaudiorate.c: (gst_audio_rate_chain):
If we have a large (> 1 second) discontinuity, push a series of
smaller buffers rather than a single very large buffer. Avoids
unreasonably large single buffer allocations when encountering a
large gap.
* tests/check/elements/audiorate.c: (GST_START_TEST),
(audiorate_suite):
Add a test for this.
Original commit message from CVS:
* gst/audioconvert/Makefile.am:
* gst/audioconvert/audioconvert.c: (audio_convert_get_func_index),
(check_default), (audio_convert_prepare_context),
(audio_convert_clean_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_dithering_get_type),
(gst_audio_convert_ns_get_type), (gst_audio_convert_class_init),
(gst_audio_convert_init), (gst_audio_convert_set_caps),
(gst_audio_convert_set_property), (gst_audio_convert_get_property):
* gst/audioconvert/gstaudioconvert.h:
* gst/audioconvert/gstaudioquantize.c:
(gst_audio_quantize_setup_noise_shaping),
(gst_audio_quantize_free_noise_shaping),
(gst_audio_quantize_setup_dither),
(gst_audio_quantize_free_dither),
(gst_audio_quantize_setup_quantize_func),
(gst_audio_quantize_setup), (gst_audio_quantize_free):
* gst/audioconvert/gstaudioquantize.h:
Implement dithering and noise shaping in audioconvert. By default now
TPDF dithering (and no noise shaping) will be used when converting
from a higher bit depth to 20 bit depth or smaller, otherwise
everything will be as it is now.
For the last audioconvert in a pipeline it would make sense to
use some kind of noise shaping, enabling it by default for all
conversions would give undesired results though. Fixes#360246.
* tests/check/elements/audioconvert.c: (setup_audioconvert),
(GST_START_TEST):
Adjust unit test for the new audioconvert.
Original commit message from CVS:
* ext/vorbis/vorbisdec.c: (vorbis_dec_decode_buffer):
Skip empty buffers, but not empty header buffers. That way the original
vorbisdec unit test still passes (#451145); also, take into account
that those empty packets might carry a granulepos.
* tests/check/Makefile.am:
* tests/check/elements/vorbisdec.c:
(_create_codebook_header_buffer), (_create_audio_buffer),
(GST_START_TEST), (vorbisdec_suite):
Add unit test that sends an empty packet.
Original commit message from CVS:
Based on a patch by Sven Arvidsson <sa at whiz dot se>:
* gst/subparse/gstsubparse.c: (parse_subrip),
(subviewer_unescape_newlines), (parse_subviewer),
(gst_sub_parse_data_format_autodetect),
(gst_sub_parse_format_autodetect), (gst_subparse_type_find):
* gst/subparse/gstsubparse.h:
Add support for SubViewer version 1 and 2 subtitles. Fixes#394061.
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add a unit test for both SubViewer formats.
Original commit message from CVS:
* tests/check/elements/playbin.c: (test_suburi_error_unknowntype):
Use /dev/zero instead of /dev/urandom to produce an invalid subtitle
file. Avoids flukes where the input gets typefound to some valid but
useless type.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/gnomevfssink.c: (setup_gnomevfssink),
(cleanup_gnomevfssink), (GST_START_TEST), (gnomevfssink_suite):
Add unit test for gnomevfssink seeking and position reporting for
file:// URIs.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
Minimal check for volume's GstController usability; also another
test for #422295.
Original commit message from CVS:
* tests/check/elements/videorate.c: (GST_START_TEST):
Set buffer timestamp to a valid value in order to test the buffer
really does stay in videorate.
Original commit message from CVS:
Patch by: Dan Williams <dcbw redhat com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
Don't leak incoming buffer if gst_pad_push() returns a
non-OK flow. Fixes#432755.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Unit test for the above by Yours Truly.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
* gst/subparse/samiparse.c:
Use GST_DISABLE_XML here
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xvimage_put),
(gst_xvimagesink_xwindow_new), (gst_xvimagesink_get_xv_support),
(gst_xvimagesink_buffer_alloc),
(gst_xvimagesink_navigation_send_event):
* sys/xvimage/xvimagesink.h:
Include stdlib.h when using atoi.
* tests/check/elements/playbin.c: (playbin_suite):
Use GST_DISABLE_REGISTRY here
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_setcaps),
(gst_video_rate_chain):
Add some debug.
* tests/check/elements/videorate.c: (GST_START_TEST),
(videorate_suite):
Added check for videorate changing caps handling. Closes#421834.
Original commit message from CVS:
* tests/check/elements/playbin.c:
(test_sink_usage_video_only_stream), (playbin_suite):
Add small test for stream-info-value-array code paths.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
with some minor changes
* gst-libs/gst/floatcast/floatcast.h:
Use more efficient float endianness conversion functions that don't
involve 2 function calls per value.
* gst/audioconvert/audioconvert.c: (audio_convert_get_func_index),
(check_default), (audio_convert_prepare_context):
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_parse_caps), (make_lossless_changes):
Support non-native endianness floats as input and output.
Fixes#339838.
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST):
Add unit tests for the non-native endianness float conversions.
Original commit message from CVS:
2007-03-29 Andy Wingo <wingo@pobox.com>
* gst/videorate/gstvideorate.c (gst_video_rate_flush_prev): Make
perfect offsets also, not just timestamps.
* tests/check/elements/videorate.c (test_more): Test that given
any incoming offsets, that videorate produces perfect offsets.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c:
Add docs to the integer pack functions and implement proper
rounding. Before we had rounding towards negative infinity, i.e.
always the smaller number was taken. Now we use natural rounding,
i.e. rounding to the nearest integer and to the one with the largest
absolute value for X.5. The old rounding introduced some minor
distortions. Fixes#420079
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Fix one unit test that assumed the old rounding and added unit tests
for checking signed/unsigned int16 <-> signed/unsigned int16 with
depth 8, one for signed int16 <-> unsigned int16 and one for the new
rounding from signed int32 to signed/unsigned int16.
Original commit message from CVS:
* tests/check/elements/subparse.c: (GST_START_TEST),
(subparse_suite):
Add unit test for MPL2 subtitle format (#413799).
Original commit message from CVS:
* tests/check/elements/alsa.c: (GST_START_TEST):
Unref the mixer if the state change fails too (if the
alsa devices are inaccessible, for example)
Original commit message from CVS:
* tests/check/Makefile.am:
Don't test libvisual elements in the states check, because libvisual
seems to leak internally.
Re-enable the alsa and states tests now that there's new suppressions
in gst.supp.
* tests/check/elements/alsa.c: (GST_START_TEST):
Don't leak the alsamixer we instantiated.
Original commit message from CVS:
* gst-libs/gst/interfaces/mixertrack.c:
(gst_mixer_track_class_init), (gst_mixer_track_get_property),
(gst_mixer_track_set_property):
API: add "untranslated-label" property which should be set by
implementations at construct time (#414645).
* ext/alsa/gstalsamixeroptions.c: (gst_alsa_mixer_options_new):
* ext/alsa/gstalsamixertrack.c: (gst_alsa_mixer_track_new):
Set "untranslated-label" when constructing mixer track objects.
* tests/check/elements/alsa.c: (GST_START_TEST), (alsa_suite):
Unit test to check the above.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double), (float_hq),
(double_hq), (audio_convert_get_func_index),
(audio_convert_prepare_context), (audio_convert_convert):
* gst/audioconvert/gstaudioconvert.c:
(gst_audio_convert_class_init), (gst_audio_convert_get_unit_size),
(gst_audio_convert_transform_caps):
* tests/check/elements/audioconvert.c: (GST_START_TEST),
(audioconvert_suite):
Don't run inplace if that overwrites source data as we go. Add more
tests. Fixes#339837 even more.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (float), (double), (float_hq),
(double_hq), (audio_convert_get_func_index),
(audio_convert_prepare_context), (audio_convert_convert):
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_setup_matrix),
(gst_channel_mix_mix_int), (gst_channel_mix_mix_float):
* gst/audioconvert/gstchannelmix.h:
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add float as an intermediate format, as well as float mixing. Enable
test that was failing before. Fixes#339837
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (subrip_remove_unhandled_tag),
(subrip_remove_unhandled_tags), (parse_subrip):
For SubRip (.srt) subtitles, ignore all markup tags we don't
handle (like font tags, for example).
* tests/check/elements/subparse.c:
Add test for this.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (add_fakesink),
(gst_decode_bin_change_state):
Don't error out if there is no fakesink in the READY to NULL state
change, since when decodebin is re-used, we're only adding the
fakesink element in READY to PAUSED.
* tests/check/elements/decodebin.c:
(new_decoded_pad_plug_fakesink_cb), (GST_START_TEST),
(decodebin_suite):
Minimal unit test to make sure we can use the same decodebin
instance twice (at least with audiotestsrc input).
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (test_float_conversion):
Add small test for 32bit float <=> 64bit float conversion (works
only one way so far, 32=>64 produces structured noise).
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize):
Don't leak mutex.
* tests/check/elements/playbin.c:
(test_sink_usage_video_only_stream),
(test_suburi_error_unknowntype), (test_suburi_error_invalidfile),
(test_suburi_error_wrongproto), (test_missing_urisource_handler),
(test_missing_suburisource_handler),
(test_missing_primary_decoder), (playbin_suite):
Run all tests once with decodebin and once with decodebin2.
One test does not pass yet with decodebin2.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_subtitle),
(gen_source_element), (gst_play_base_bin_change_state):
Attempt at a better error message in case we don't have the required
URI handler installed; post missing-plugin message also when we're
missing an URI handler for the subtitle URI; clean up properly also
when an error occurs and we never made it to PAUSED state.
* tests/check/elements/playbin.c: (GST_START_TEST),
(playbin_suite):
Check that we're also getting a missing-plugin messsage for a
missing subtitle URI handler (and clean up properly).
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstplaybasebin.c: (string_arr_has_str),
(unknown_type), (setup_subtitle), (gen_source_element):
* gst/playback/gstplaybin.c: (plugin_init):
Post missing-plugin messages on the bus for missing sources and
missing decoders/demuxers/depayloaders; fix error code used when
we're missing an URI handler source; for media types that we are not
handling on purpose at the moment, don't print "don't know how to
handle xyz" messages to the terminal or post missing-plugin
messages on the bus.
* tests/check/elements/playbin.c: (create_playbin),
(GST_START_TEST), (gst_codec_src_uri_get_type),
(gst_codec_src_uri_get_protocols), (gst_codec_src_uri_get_uri),
(gst_codec_src_uri_set_uri), (gst_codec_src_uri_handler_init),
(gst_codec_src_init_type), (gst_codec_src_base_init),
(gst_codec_src_create), (gst_codec_src_class_init),
(gst_codec_src_init), (plugin_init), (playbin_suite):
Add some tests for the missing-plugin stuff.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (parse_mdvdsub):
* gst/subparse/gstsubparse.h:
Remove spurious 1000 subtrahend when calculating the timestamp from
the frame number and the frame rate . Also, use the frames/second
value specified in the first line of the file, if one is specified
there. Should fix#357503.
* tests/check/elements/subparse.c: (do_test),
(test_tmplayer_do_test), (test_microdvd_do_test), (GST_START_TEST),
(subparse_suite):
Add some basic unit tests for the microdvd subtitle format.
Original commit message from CVS:
* tests/check/elements/gdpdepay.c: (cleanup_gdpdepay),
(setup_gdpdepay_streamheader):
* tests/check/elements/gdppay.c: (cleanup_gdppay),
(setup_gdppay_streamheader):
Fix the dp tests, but activating the pads for the streamheader tests
too and cleaning up conditionaly
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found):
Special-case the text/plain media type: we only want to recognise it
as a 'raw' decoded media type if it comes from a demuxer or subtitle
parser, but not if the entire stream is of text/plain type. If the
entire stream is text/plain, we should just error out.
This fixes playback of audio files with lyrics in totem. Totem can't
distinguish between text files and subtitle files and passes any
.txt file with the same basename as the main file to playbin as
suburi, and playbin will then throw a 'subtitle found, but no video
stream' error, which isn't entirely helpful. See #380342.
Also, with this change we'll show a slightly more correct error
message in case totem passes a playlist file to us (although a
custom error message wording instead of the default text would
probably not be a bad idea either).
Same problem also needs to be fixed for playbin+decodebin2.
* tests/check/Makefile.am:
* tests/check/elements/decodebin.c: (src_handoff_cb),
(decodebin_new_decoded_pad_cb), (GST_START_TEST),
(decodebin_suite):
Add simple unit test for decodebin for the above.
Original commit message from CVS:
* ext/pango/gsttextoverlay.c: (gst_text_overlay_init),
(gst_text_overlay_text_pad_unlink), (gst_text_overlay_text_event),
(gst_text_overlay_video_event), (gst_text_overlay_pop_text),
(gst_text_overlay_text_chain), (gst_text_overlay_video_chain),
(gst_text_overlay_change_state):
* ext/pango/gsttextoverlay.h:
Some textoverlay fixes: for one, in the video chain function,
actually wait for a text buffer to come in if there is none at the
moment and there should be one; also, deal more gracefully with
incoming buffers that do not have a timestamp or duration; discard
text buffer when not needed any longer. Fixes#341681.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/textoverlay.c:
(notgst_check_setup_src_pad2), (notgst_check_teardown_src_pad2),
(setup_textoverlay), (buffer_is_all_black), (create_black_buffer),
(create_text_buffer), (cleanup_textoverlay), (GST_START_TEST),
(test_video_waits_for_text_send_text_newsegment_thread),
(test_video_waits_for_text_shutdown_element),
(test_render_continuity_push_video_buffers_thread),
(textoverlay_suite):
Add some unit tests for textoverlay.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/ffmpegcolorspace.c:
(ffmpegcolorspace_suite):
Enable ffmpegcolorspace test now that the RGBA32 issue is fixed
(for now not for valgrinding though, since it takes too long).
Original commit message from CVS:
* gst/videotestsrc/Makefile.am:
* tests/check/Makefile.am:
Make sure our checks and the videotestsrc plugin link against the
local uninstalled gst libs and not any installed gst libs that
might happen to exist as well.
* tests/check/elements/adder.c: (message_received),
(test_event_message_received), (test_play_twice_message_received):
* tests/check/elements/ffmpegcolorspace.c: (GST_START_TEST):
Fix compiler warnings when compiling against core with disabled
debugging system.
Original commit message from CVS:
* tests/check/elements/audiorate.c: (test_injector_base_init),
(test_injector_class_init), (test_injector_chain),
(test_injector_init), (probe_cb), (do_perfect_stream_test),
(GST_START_TEST), (audiorate_suite):
More tests for audiorate: inject buffers to check behaviour when
buffers overlap.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/audiorate.c: (probe_cb), (got_buf),
(do_perfect_stream_test), (GST_START_TEST), (audiorate_suite):
Add some basic unit tests for audiorate. Disabled at the moment
since it doesn't pass yet (see bug #363119).
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (subrip_fix_up_markup),
(parse_subrip), (handle_buffer):
Add missing closing tags for markup and fix broken markup,
otherwise pango won't render anything (fixes#357531). Also,
make sure the text we send out is always NUL-terminated
(better safe than sorry etc.).
* tests/check/elements/subparse.c: (test_srt_do_test),
(test_srt):
Some more tests for .srt incl. tests for the above stuff.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/subparse.c: (buffer_from_static_string),
(setup_subparse), (teardown_subparse), (test_srt_do_test),
(GST_START_TEST), (subparse_suite):
Add very simple unit test for subparse.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (subbin_startup_sync_msg),
(setup_source):
Catch async errors when starting up the subtitle bin, so we can
stop waiting and continue with the main film instead of hanging
forever. Fixes#339366.
* tests/check/elements/playbin.c: (playbin_suite):
Enable unit test for the above.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/playbin.c: (GST_START_TEST),
(gst_red_video_src_uri_get_type),
(gst_red_video_src_uri_get_protocols),
(gst_red_video_src_uri_get_uri), (gst_red_video_src_uri_set_uri),
(gst_red_video_src_uri_handler_init),
(gst_red_video_src_init_type), (gst_red_video_src_base_init),
(gst_red_video_src_create), (gst_red_video_src_class_init),
(gst_red_video_src_init), (plugin_init), (playbin_suite):
Some small and basic unit tests for playbin; not very useful yet,
but at least a start.
Original commit message from CVS:
Patch by: James "Doc" Livingston <doclivingston at gmail com>
* ext/vorbis/Makefile.am:
* ext/vorbis/vorbis.c: (plugin_init):
* ext/vorbis/vorbisparse.c: (gst_vorbis_parse_class_init),
(vorbis_parse_parse_packet), (vorbis_parse_chain):
* ext/vorbis/vorbisparse.h:
* ext/vorbis/vorbistag.c: (gst_vorbis_tag_base_init),
(gst_vorbis_tag_class_init), (gst_vorbis_tag_init),
(gst_vorbis_tag_parse_packet):
* ext/vorbis/vorbistag.h:
Add new vorbistag element which derives from vorbisparse
and is essentially the same as well, only that it implements
the GstTagSetter interface and can modify the stream's
vorbiscomment on the fly (#335635).
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/vorbistag.c: (setup_vorbistag),
(cleanup_vorbistag), (buffer_probe), (start_pipeline),
(get_buffer), (stop_pipeline), (_create_codebook_header_buffer),
(_create_audio_buffer), (GST_START_TEST), (vorbistag_suite):
Add unit test for new vorbistag element.
Original commit message from CVS:
* tests/check/elements/adder.c: (adder_suite):
Don't set timeout to 6 seconds when we're running
in valgrind ... (and how is 6 seconds longer than
the default anyway?)
Original commit message from CVS:
* ext/gnomevfs/gstgnomevfssrc.c:
Fix misleading docs addition.
* tests/check/elements/videotestsrc.c: (check_rgb_buf):
Get rid of compiler warning the right way.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/ffmpegcolorspace.c: (rgb_format_to_caps),
(create_rgb_conversions), (rgb_conversion_free),
(right_shift_colour), (fix_expected_colour), (check_rgb_buf),
(got_buf_cb), (GST_START_TEST), (ffmpegcolorspace_suite):
Add unit test for ffmpegcolorspace (RGB <=> RGB only so far),
but disable for now since it doesn't pass (something wrong with
RGBA somewhere).
Original commit message from CVS:
patch by: Michael Smith <msmith at fluendo dot com>
* gst/tcp/gstmultifdsink.c: (is_sync_frame),
(gst_multi_fd_sink_client_queue_buffer),
(gst_multi_fd_sink_new_client):
* tests/check/elements/multifdsink.c: (GST_START_TEST),
(multifdsink_suite):
Fix implementation of sync-method 'next-keyframe'
Original commit message from CVS:
* tests/check/elements/videotestsrc.c: (check_rgb_buf):
Returning a return value often helps. In this case, we
don't need the return value anyway, so just get rid of it.
Should make build bots much happier.
Original commit message from CVS:
* gst/videotestsrc/videotestsrc.c: (paintinfo_find_by_structure),
(paint_get_structure), (gst_video_test_src_get_size),
(gst_video_test_src_smpte), (gst_video_test_src_snow),
(gst_video_test_src_unicolor), (paint_setup_AYUV),
(paint_hline_AYUV), (paint_setup_ARGB8888), (paint_setup_ABGR8888),
(paint_setup_RGBA8888), (paint_setup_BGRA8888), (paint_hline_str4):
* gst/videotestsrc/videotestsrc.h:
Add support for AYUV and the various RGBA formats. Initialise
fields of paintinfo structs allocated on the stack.
* tests/check/elements/videotestsrc.c: (right_shift_colour),
(fix_expected_colour), (check_rgb_buf), (got_buf_cb),
(GST_START_TEST), (videotestsrc_suite):
Add unit tests for videotestsrc's RGB output.
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Fix leaks. Wait for state transitions that might happen ASYNC, as well
as some that won't.
Original commit message from CVS:
* tests/check/elements/gdpdepay.c: (gdpdepay_suite):
I forgot to include the file containing the #define :)
Now includes "config.h"
Original commit message from CVS:
* gst/gdp/gstgdpdepay.c: (gst_gdp_depay_init):
proxying get/set caps is the wrong thing to do, since we really
do change caps quite fundamentally
* tests/check/elements/gdpdepay.c:
* tests/check/elements/gdppay.c:
remove declaration of buffers, it's already done in gstcheck.h
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (get_float_mc_caps),
(get_int_mc_caps), (GST_START_TEST), (audioconvert_suite):
Patch from #347221 adding a test for audioconvert
channel remappings.
Original commit message from CVS:
* tests/check/elements/audioresample.c: (test_reuse),
(audioresample_suite):
Add test case for bug #342789 fixed below.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(gst_audioresample_class_init), (gst_audioresample_init),
(audioresample_start), (audioresample_stop),
(gst_audioresample_set_property), (gst_audioresample_get_property):
Implement GstBaseTransform::start and ::stop so that audioresample
can clear its internal state properly and be reused insted of
causing non-negotiated errors with playbin under some circumstances
(#342789).
* tests/check/elements/audioresample.c: (setup_audioresample),
(cleanup_audioresample):
Need to set element state here so that ::start and ::stop are
called.
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (set_channel_positions),
(get_float_mc_caps), (get_int_mc_caps):
* tests/check/elements/audioresample.c:
* tests/check/elements/audiotestsrc.c: (GST_START_TEST):
* tests/check/elements/videorate.c:
* tests/check/elements/videotestsrc.c: (GST_START_TEST):
* tests/check/elements/volume.c:
* tests/check/elements/vorbisdec.c:
* tests/check/pipelines/vorbisenc.c: (GST_START_TEST):
Don't busy-wait in tests; this was causing test timeouts very
frequently when running under valgrind.
Original commit message from CVS:
* gst/tcp/README:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_init),
(gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_client_queue_caps),
(gst_multi_fd_sink_client_queue_buffer),
(gst_multi_fd_sink_handle_client_write),
(gst_multi_fd_sink_render):
* gst/tcp/gstmultifdsink.h:
make multifdsink properly deal with streamheader:
- streamheader is taken from caps
- buffers marked with IN_CAPS are not sent
- streamheaders are sent, on connection, from the caps of the
buffer where the client gets positioned to
- further streamheader changes are done every time the client
will receive a buffer with different caps
* tests/check/elements/multifdsink.c: (GST_START_TEST),
(gst_multifdsink_create_streamheader):
add tests for this
Original commit message from CVS:
* gst/gdp/gstgdppay.c: (gst_gdp_pay_class_init),
(gst_gdp_pay_init), (gst_gdp_buffer_from_caps),
(gst_gdp_pay_buffer_from_buffer), (gst_gdp_buffer_from_event),
(gst_gdp_pay_reset_streamheader), (gst_gdp_pay_chain),
(gst_gdp_pay_sink_event), (gst_gdp_pay_set_property),
(gst_gdp_pay_get_property):
add crc-header and crc-payload properties
don't error out on some things that are recoverable
* tests/check/elements/gdppay.c: (GST_START_TEST), (gdppay_suite):
add test for crc
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_choose_func),
(volume_update_real_volume), (gst_volume_class_init),
(gst_volume_init), (volume_process_float), (volume_process_int16),
(volume_process_int16_clamp), (volume_set_caps),
(volume_transform_ip), (plugin_init):
* gst/volume/gstvolume.h:
rewrite the passthrough check, split _int16 and _int16_clamp, fix
another property desc., remove unused param from process function
* tests/check/elements/volume.c: (volume_suite):
reactivate the passthrough test
Original commit message from CVS:
* tests/check/elements/adder.c: (test_event_message_received),
(test_play_twice_message_received), (GST_START_TEST),
(adder_suite):
Added check to show that #339935 is fixed with ongoing
adder and collectpads fixes.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_get_type):
Make it easier to copy&paste
* gst/volume/Makefile.am:
* gst/volume/gstvolume.c: (volume_update_real_volume),
(gst_volume_set_volume), (gst_volume_set_mute),
(gst_volume_class_init), (volume_process_int16), (volume_set_caps),
(volume_transform_ip), (volume_update_mute),
(volume_update_volume):
* gst/volume/gstvolume.h:
Add own debug category, move duplicate code to helper function, fix
property texts, add more comments and prepare ffor liboil-goodness
* tests/check/Makefile.am:
* tests/check/elements/volume.c: (GST_START_TEST), (volume_suite):
add test for mute and passtrough case, be a bit more verbose to track
failure
* tests/check/generic/states.c: (GST_START_TEST):
catch elements that fail to instantiate
Original commit message from CVS:
* ext/theora/theoradec.c:
* ext/theora/theoraenc.c:
* ext/theora/theoraparse.c: (gst_theora_parse_class_init):
* gst/audiorate/gstaudiorate.c:
make more debug catagories static
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (message_received),
(test_event_message_received), (GST_START_TEST),
(test_play_twice_message_received), (adder_suite):
added test case for using element twice, extra bonus points for anyone
who can make these test run reliably
Original commit message from CVS:
* tests/check/elements/alsa.c: (test_device_property_probe):
Fix test case: don't try to free NULL GValueArray when there
are no devices.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/alsa.c: (test_device_property_probe),
(alsa_suite), (main):
Add simple test that runs a device property probe on alsasrc,
alsasink and alsamixer. Disable valgrind check for now (too
many leaks in libasound, and valgrind ignored my suppressions
additions).
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c: (gst_channel_mix_fill_others):
Fix#341696: crash when mixing L+R+C to mono or stereo.
* tests/check/Makefile.am:
* tests/check/elements/audioconvert.c: (set_channel_positions),
(get_float_mc_caps), (get_int_mc_caps), (GST_START_TEST),
(audioconvert_suite):
Add test for the above, including some generic framework bits for
testing multichannel things.
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_remove_client_link),
(gst_multi_fd_sink_new_client), (gst_multi_fd_sink_stop):
remove stupid example from docs - it should come with a simple
C program instead.
Clean up/fix docs
* tests/check/elements/multifdsink.c: (wait_bytes_served),
(fail_if_can_read), (GST_START_TEST),
(gst_multifdsink_create_streamheader), (multifdsink_suite):
add a test for changing streamheader which exposes a bug in
multifdsink
Original commit message from CVS:
* tests/check/elements/multifdsink.c: (wait_bytes_served),
(GST_START_TEST), (fail_unless_read), (multifdsink_suite):
add two more tests, one doing streamheader
Original commit message from CVS:
* gst/tcp/gstmultifdsink.c: (gst_multi_fd_sink_stop):
clean up the bufqueue when shutting down
* tests/check/Makefile.am:
* tests/check/elements/multifdsink.c: (setup_multifdsink),
(cleanup_multifdsink), (GST_START_TEST), (multifdsink_suite),
(main):
add a test for the leak that was just fixed
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_setcaps),
(gst_adder_query_duration), (gst_adder_query), (forward_event),
(gst_adder_src_event), (gst_adder_sink_event),
(gst_adder_class_init), (gst_adder_finalize),
(gst_adder_request_new_pad), (gst_adder_collected):
* gst/adder/gstadder.h:
Updated some docs. Added comments and FIXMEs all over the place.
Improve debugging info.
Fix leak on finalize by not calling the parent.
Implement duration query.
Make event forwarding threadsafe.
Correctly send NEWSEGMENT at start and after flush.
Handle EOS correctly.
Post error when not negotiated.
* tests/check/elements/adder.c: (GST_START_TEST):
Added FIXME in the test.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (event_loop), (GST_START_TEST):
Disable the adder test, until the build-slaves posses the kindness to
either like it or to give valid reason for not doing so
Original commit message from CVS:
* tests/check/elements/adder.c: (event_loop), (GST_START_TEST),
(adder_suite):
Shuffle NULL state change around and raise timeout more
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mp4_find_box),
(mp4_type_find), (plugin_init):
Add typefind to distinguish between "audio/x-m4a" and new type
"video/mp4". Fixes#340375
* tests/check/elements/adder.c: (adder_suite):
Raise timeout to make buildbot happy
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_sink_event),
(gst_adder_request_new_pad), (gst_adder_change_state):
* gst/adder/gstadder.h:
* tests/check/Makefile.am:
* tests/check/elements/adder.c: (event_loop), (GST_START_TEST),
(adder_suite), (main):
Add sink-event handling to adder. It tries to merge incomming
newsegment-events. Added test to check if segment_done is comming
through.
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST):
interpret the out[] buffer in the order the bytes are actually
put in, which is LITTLE_ENDIAN, not BYTE_ORDER.
Other tests should use BYTE_ORDER since the array is filled in
with actual values
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (verify_convert),
(GST_START_TEST):
when a test fails, give an indication of which it is
Original commit message from CVS:
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_swap_prev), (gst_video_rate_chain):
fix up docs
fix a leak when no caps negotiated
fix counting of input frames
* tests/check/elements/.cvsignore:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(GST_START_TEST), (videorate_suite):
add tests for these
Original commit message from CVS:
* tests/check/elements/audioconvert.c: (get_float_caps),
(GST_START_TEST), (audioconvert_suite):
Added check for correct clipping when doing float samples
in audioconvert.
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* gst/videorate/gstvideorate.c: (gst_video_rate_chain):
* tests/check/Makefile.am:
* tests/check/elements/videorate.c: (assert_videorate_stats),
(setup_videorate), (cleanup_videorate), (GST_START_TEST),
(videorate_suite), (main):
Fix an infinite loop if frames are passed in with wrongly ordered
timestamps. Fixes#339013.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/audiotestsrc.c: (setup_audiotestsrc),
(cleanup_audiotestsrc), (GST_START_TEST), (audiotestsrc_suite),
(main):
add a test for audiotestsrc, testing all waves. Even seems
leak-free at first glance, nice job Stefan
Original commit message from CVS:
* check/elements/audioconvert.c: (setup_audioconvert),
(cleanup_audioconvert), (get_int_caps), (verify_convert),
(GST_START_TEST), (audioconvert_suite):
clean up tests a little, fix some leaks.
Original commit message from CVS:
* check/Makefile.am:
have some tests be disabled for valgrinding
* check/elements/vorbisdec.c: (cleanup_vorbisdec),
(GST_START_TEST):
* ext/vorbis/vorbisdec.c: (vorbisdec_finalize):
Fix A Leak. Chain To Parent Finalize.
Original commit message from CVS:
2005-08-29 Andy Wingo <wingo@pobox.com>
* check/elements/audioconvert.c: Convert from native endian, not
little endian.
Original commit message from CVS:
* check/Makefile.am:
* check/elements/audioconvert.c: (setup_audioconvert),
(cleanup_audioconvert), (get_int_caps), (verify_convert),
(GST_START_TEST), (audioconvert_suite), (main):
add a test for audioconvert
* gst/audioresample/gstaudioresample.c:
* gst/audioresample/gstaudioresample.h:
set DURATION so that TIMESTAMP(a) + DURATION(a) == TIMESTAMP(b);
note that for buffers of 1/3 sec this means DURATION(c) is
one nanosecond more than for a and b
