If a discontinuity is detected in push mode, we need to clear the cached section
observations since they might have potentially changed.
This was only done properly when operating with TIME segments (dvb, udp,
adaptive demuxers, ...) but not with BYTE segments (such as with custom app/fd
sources).
We still don't want to flush out the PCR observations, since this might be
needed for seeking in push-based BYTE sources.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1650
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3584>
This reverts the decision from
https://bugzilla.gnome.org/show_bug.cgi?id=754230
where it was decided that we rather play safe and only use the `tfdt` if
it is "significantly different" to the sum of sample durations.
As the specification says
If the time expressed in the track fragment decode time (‘tfdt’) box
exceeds the sum of the durations of the samples in the preceding
movie and movie fragments, then the duration of the last sample
preceding this track fragment is extended such that the sum now
equals the time given in this box.
we have to use the `tfdt` in general to allow for it to signal gaps in
the stream.
A muxer producing fragments might not yet know the full duration of the
last sample of a previous fragment if the next fragment starts with a
gap, and knowing the actual start of the next fragment would potentially
require to violate latency requirements.
Additionally, the existence of `tfdt` allows to avoid accumulating
rounding errors from summing up the durations.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3586>
... when rendering on external HWND. ShowWindow() will cause
synchronous message passing to window thread and then can be blocked.
At the same time, window thread can wait for GStreamer thread.
Instead of the synchronous call, queue the task to window message
and performs from the window thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3583>
The rtpjitterbuffer test drop_messages_interval uses a GstClockTime for
the message drop interval. This property is defined as a guint. On
systems with 64-bit time_t but 32-bit uint, this can cause the
g_object_set function to fail to read the arguments properly.
Fixes: #1656
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3580>
Deadlock sequence:
* From a streaming thread, d3d11videosink sends synchronous message
to the parent window, so that internal (child) window can be
constructed on the parent window's thread
* App thread (parent window thread) is waiting for pipeline's
state change (to GST_STATE_NULL) but streaming thread is
blocked and waiting for app thread
To avoid the deadlock, GstD3D11WindowWin32 should send message
to the parent window asynchronously.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3570>
If we keep the old events they can be end up being passed to the app, that could
discard the protection information because it has been seen before.
Drive by improvement: use g_queue_clear_full instead of foreach+clear for
protection events.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3547>
On macOS, a Cocoa event loop is needed in the main thread to ensure
things like opening a GL window work correctly. In the past, this was
patched into glib via Cerbero, but that prevented us from updating it.
This workaround simply runs an NSApplication and then calls the
main function on a secondary thread, allowing GStreamer to correctly
display windows and/or system permission prompts, for example.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3532>
When a session request is coming in, ERROR occurs when the callee is busy.
But peer_status is the status of the caller, which is of course None when
calling someone, while self.peers[callee_id][2] is that of the callee.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2460>
jpegdec is capable to parse input frames, but if jpegparse is before,
there's no need to reparse frames. This patch configure jpegdec as
packetized, skipping parsing, if negotiated sink caps has the boolean
field 'parsed' as true.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2464>
Systems like musl libc don't support ISO 6937 in iconv. This ensures
that the MPEG-TS plugin can cope with that. There is existing support
in the plugin for other methods, so it seems to have been the original
intent anyway.
Fixes: #1314
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3245>
According to comment in gst_pulsering_stream_latency_cb, latency updates
happen every 100 ms. The code in gst_pulsering_stream_latency_cb does
not care about the actual state of the ringbuffer, pbuf->acquired or
not.
Thus, every 100 ms the ringbuf->segdone may be set, even though the
object itself might be in 'destroyed' state. On next
gst_pulseringbuffer_acquire the segdone is not touched, so playback may
resume with invalid/wrong segdone value. This finally leads to a period
of silence playing after resuming the pipeline.
The problem was found on 'not-yet-released'-hardware and so far was not
reproducible on desktop computer.
Removing the callback as long as the ringbuffer is not in 'acquired'
state solves the problem reliably on the hardware device that the issue
was detected on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3082>
Apparently mesa 22.3.0 has updated the egl headers, and eglplatform.h now
contains commit
3670d645f4
after which xlib headers don't get included by default anymore but are
dependent upon whether USE_X11 was defined.
This breaks headless builds of gstreamer-vaapi because we always define
an internal define USE_X11 as either 1 or 0.
Change these defines to GST_VAAPI_USE_XYZ instead to avoid this.
Fixes#1634
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3555>
```
ERROR: [links]: (mandatory-link-not-found): Mandatory link Link GstGLSinkBin -> None (GstGLSinkBin) could not be resolved
ERROR: [links]: (mandatory-link-not-found): Mandatory link Link GstRTPMux -> None (GstRTPMux) could not be resolved
ERROR: [links]: (mandatory-link-not-found): Mandatory link Link GstSRTSink -> None (GstSRTSink) could not be resolved
ERROR: [links]: (mandatory-link-not-found): Mandatory link Link GstSRTSrc -> None (GstSRTSrc) could not be resolved
```
Same change was already made in the 1.20 branch:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1582#note_1669723
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3527>
This wasn't really done, and is needed in order to detect potential section
changes for sections that have got identical information (such as when switching
between streams that have the same PAT/PMT pid and subtable information).
Other checks exist in tsbase to detect if the "new" PAT/PMT really is an update or not.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3530>
gst_plugin_load_by_name() assumed a plugin has a filename,
which isn't true for static plugins, leading to criticals.
If a plugin is already loaded, just return the loaded plugin,
which makes it work for static plugins as well as saving a
moment for already-loaded dynamic plugins.
Add locking in gst_plugin_is_loaded(), as a plugin may be
still being loaded in another thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3552>
