Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstlfocontrolsource.c: (_calculate_pos),
(gst_lfo_waveform_get_type), (gst_lfo_control_source_reset),
(gst_lfo_control_source_new),
(gst_lfo_control_source_set_waveform),
(gst_lfo_control_source_bind), (gst_lfo_control_source_init),
(gst_lfo_control_source_finalize),
(gst_lfo_control_source_dispose),
(gst_lfo_control_source_set_property),
(gst_lfo_control_source_get_property),
(gst_lfo_control_source_class_init):
* libs/gst/controller/gstlfocontrolsource.h:
* libs/gst/controller/gstlfocontrolsourceprivate.h:
API: Add GstLFOControlSource, a control source that gives values
for specific timestamps based on several periodic waveforms.
Fixes#459717.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add documentation and unit tests for GstLFOControlSource.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
When linearly interpolating integer types, round to the nearest int
by adding 0.5. Don't do it for float/double types.
Fixes the failing controller test on my machine, which is somehow
rounding differently than on the buildbots.
Original commit message from CVS:
Reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/Makefile.am:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_add_interpolation_control_source),
(gst_controlled_property_new), (gst_controlled_property_free),
(gst_controller_find_controlled_property),
(gst_controller_new_valist), (gst_controller_new_list),
(gst_controller_new), (gst_controller_remove_properties_valist),
(gst_controller_remove_properties_list),
(gst_controller_remove_properties),
(gst_controller_set_property_disabled),
(gst_controller_set_disabled), (gst_controller_set_control_source),
(gst_controller_get_control_source), (gst_controller_get),
(gst_controller_sync_values), (gst_controller_get_value_array),
(_gst_controller_dispose), (gst_controller_get_type),
(gst_controlled_property_set_interpolation_mode),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_get_all), (gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstcontrolsource.c:
(gst_control_source_class_init), (gst_control_source_init),
(gst_control_source_get_value),
(gst_control_source_get_value_array), (gst_control_source_bind):
* libs/gst/controller/gstcontrolsource.h:
* libs/gst/controller/gsthelper.c: (gst_object_set_control_source),
(gst_object_get_control_source):
* libs/gst/controller/gstinterpolation.c:
(gst_interpolation_control_source_find_control_point_node),
(gst_interpolation_control_source_get_first_value),
(_interpolate_none_get), (interpolate_none_get),
(interpolate_none_get_boolean_value_array),
(interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(_interpolate_trigger_get), (interpolate_trigger_get),
(interpolate_trigger_get_boolean_value_array),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
* libs/gst/controller/gstinterpolationcontrolsource.c:
(gst_control_point_free), (gst_interpolation_control_source_reset),
(gst_interpolation_control_source_new),
(gst_interpolation_control_source_set_interpolation_mode),
(gst_interpolation_control_source_bind),
(gst_control_point_compare), (gst_control_point_find),
(gst_interpolation_control_source_set_internal),
(gst_interpolation_control_source_set),
(gst_interpolation_control_source_set_from_list),
(gst_interpolation_control_source_unset),
(gst_interpolation_control_source_unset_all),
(gst_interpolation_control_source_get_all),
(gst_interpolation_control_source_get_count),
(gst_interpolation_control_source_init),
(gst_interpolation_control_source_finalize),
(gst_interpolation_control_source_dispose),
(gst_interpolation_control_source_class_init):
* libs/gst/controller/gstinterpolationcontrolsource.h:
* libs/gst/controller/gstinterpolationcontrolsourceprivate.h:
API: Refactor GstController into the core controller which can take
a GstControlSource for providing actual values for timestamps.
Implement a interpolation control source and use this for backward
compatibility, deprecate a bunch of functions that are now handled
by GstControlSource or GstInterpolationControlSource.
Make it possible to disable the controller completely or only for
specific properties. Fixes#450711.
* docs/libs/gstreamer-libs-docs.sgml:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/gstreamer-libs.types:
Add new functions and classes to the docs.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
* tests/examples/controller/audio-example.c: (main):
Port unit test and example to the new API and add some new
unit tests.
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_event):
Work around the brokenness of the event vmethod in basetransform. Prefer
to return TRUE when the subclass returned FALSE (meaning don't forward
the event).
* libs/gst/base/gstbasetransform.h:
Clarify the docs.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
Fix wrong getter for enums in controller.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init):
Intercept criticals and warnings in the Gst-Phonon log domain, so
ASSERT_CRITICAL() etc. can be used in gst-phonon's unit tests as
well.
Original commit message from CVS:
* libs/gst/check/Makefile.am:
* libs/gst/check/gstcheck.h:
* pkgconfig/gstreamer-check-uninstalled.pc.in:
* pkgconfig/gstreamer-check.pc.in:
Ugly 'fix' for the controller unit test on the p5 bot: in
fail_unless_equals_float() check whether the values are 'almost
equal' by allowing a small absolute error, which should be good
enough for our use cases (normal numbers and values close to 0).
Proper fixage left to floating point arithmetic aficionados.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/check/gstcheck.h:
API: add fail_unless_equals_float() and assert_equals_float().
Add documentation for some of the macros.
* tests/check/libs/controller.c: (GST_START_TEST):
Use newly-added asserts.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Actually use the new functions with min/max checks for the trigger and
none interpolation modes for get() and get_value_array() instead of
just the latter.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_free):
Unset the minimum and maximum GValues when freeing the corresponding
GstControllerProperty struct.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_none_get_enum_value_array),
(interpolate_none_get_string_value_array),
(interpolate_trigger_get),
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Protect against values larger or smaller than the minimum or maximum
allowed value for the property when using values that can be compared.
Optimize trigger interpolator a bit by taking the last requested value
into account instead of always looping through the complete list.
Fix coding style a bit, everywhere else we use "return foo" instead
of "return (foo)".
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the protection against too large or too small
values.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c: (DEFINE_CUBIC_GET):
Use gst_util_guint64_to_gdouble for conversions.
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
Clarify docs: The get_all, get_value_array(s) functions
don't modify the GObject properties.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode),
(gst_controlled_property_prepend_default),
(gst_controlled_property_new), (gst_controller_set_unlocked),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
Factor out the 'set' logic into gst_controller_set_unlocked for the
gst_controller_set and gst_controller_set_from_list functions.
To make life of the interpolators easier always add a control point
at timestamp zero with the default value.
In the linear interpolator make things more obvious by better variable
naming (slope).
Implement cubic interpolation mode (by using a natural cubic spline)
and map the quadratic interpolation mode to this too (as quadratic
doesn't make much sense, see discussion on the list).
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for the cubic interpolation mode and check everywhere
if the interpolation mode could be set as expected.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Use an array of the correct type when using _get_value_array with
linear interpolation.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Add support for retrieving value arrays when using the trigger
interpolation mode.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c:
(gst_controller_suggest_next_sync), (gst_controller_sync_values),
(_gst_controller_get_property), (_gst_controller_set_property),
(_gst_controller_init), (_gst_controller_class_init):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gsthelper.c: (gst_object_suggest_next_sync),
(gst_object_get_control_rate), (gst_object_set_control_rate):
API: gst_controller_suggest_next_sync(), gst_object_suggest_next_sync()
Add API that provides sync suggestion timestamps for elements that
call gst_object_sync_values() from which those elements can subdivide
their processing loop to get the best results for the controlled
properties. For now it just suggests last_sync + control_rate as
new timestamp but this will be improved in the future.
While doing that change the control-rate property to a GstClockTime
from guint and change it's meaning from samples to nanoseconds as
the GstController doesn't know anything about sampling rate. Strictly
speaking this breaks ABI but as the control-rate property didn't do
anything in the past and as such couldn't be used this should be no
problem.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node):
Save last synced value from the list to continue searching from there
in future syncs. This speeds everything up a bit.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes#422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file