Commit graph

1509 commits

Author SHA1 Message Date
Vineeth TM
b37c550b2b validate:launcher: skip setting up test suite for --medias-paths
in validate.py, some mixer test generators are being added by default.
When passing --media-paths, i would not want to test these.
So instead of setting up the validate test suite, just call tester.register_defaults().

https://bugzilla.gnome.org/show_bug.cgi?id=752518
2015-08-05 16:12:47 -04:00
Vineeth TM
e0962c66ed validate: scenarios: Change start time for reverse playback
Right now reverse playback happens till the beginning of the media file.
But for files which are longer than 150 seconds,
Timeout 'Hard timeout reached: 150 secs' error happens. So we should set the
start time within 150 seconds.

https://bugzilla.gnome.org/show_bug.cgi?id=753216
2015-08-04 15:24:14 +02:00
Thibault Saunier
1fd14635ed validate: launcher: Add a --force-sync option
Which should put the testsuite in a clean state (basically using git
reset --hard for git based testsuite for example)
2015-08-04 15:23:54 +02:00
Nicolas Dufresne
bc297a8295 validate: Enable flac reverse playback tests
This is now supported and works as expected.
2015-08-04 08:53:17 -04:00
Nicolas Dufresne
6993666749 validate: media-descriptor: Workaround file:// stream-id changing
file:// base stream-id will vary depending on the file path. As we
don't expect everyone to use the same absolute path to place the
validate testsuite, the resulting stream-id changes. Because of that,
we can't match the stream-id in the recorded file, hence cannot do
further check. We work around this by doing what filesink would do,
which is compute a SHA256 of the URI which we can use to first
validate the ID is prefixed like expected, and decide if we should
consider the stream IDs the same or not.

https://bugzilla.gnome.org/show_bug.cgi?id=753079
2015-07-31 18:38:10 -04:00
Nicolas Dufresne
e25a6aaf78 validate: media-descriptor: Fix reading seekable record
Casting the result of g_strmp0 to boolean won't make gboolean
value 0 or 1. We need proper 0 and 1 so we can use == comparision.
2015-07-31 10:49:00 -04:00
Vineeth TM
8d477c6d93 validate: media-descriptor: handle proper return values
while comparing the media descriptor with --expected-results, the return
values are not being handled properly, which results in wrong comparision

https://bugzilla.gnome.org/show_bug.cgi?id=748390
2015-07-31 09:42:04 -04:00
Nicolas Dufresne
bd5fb7be26 validate: media-descriptor: Add comment before ignored return value
As stated in the bug, this comparison failing is not a critical
error, warning is enough. Add a comment so nobody thinks it's a
coding error.

https://bugzilla.gnome.org/review?bug=748390
2015-07-31 09:42:04 -04:00
Vineeth TM
2a5ff3f3c8 validate: media-descriptor: remove duplicate conditions
when comparing tags, two conditions in if an else if are same
the correct way is to first check if both are NULL and return.
changed the condition accordingly.

https://bugzilla.gnome.org/show_bug.cgi?id=748390
2015-07-30 15:09:00 -04:00
Vineeth TM
f020c41d41 validate: media-descriptor: fix trivial spelling mistakes
replace comparse_stream with compare_streams

https://bugzilla.gnome.org/show_bug.cgi?id=748390
2015-07-30 15:09:00 -04:00
Vineeth TM
c91ed016b1 validate:tools: set locale to all and change argument to FILENAME
When file name consists of characters from other languages, say korean,
then it throws an error
Error initializing: Invalid byte sequence in conversion input

Hence setting locale to all to fix this.
And changing the media-info argument to type G_OPTION_ARG_FILENAME

https://bugzilla.gnome.org/show_bug.cgi?id=752945
2015-07-30 14:06:41 +01:00
Thibault Saunier
df76ce5812 validate: Add a method to get action->scenario in a thread safe way
API:
  gst_validate_action_get_scenario
2015-07-25 10:54:19 +02:00
Olivier Crête
386b91522c validate-scenario: Use thread-safe GWeakRef
Since _set_done() is meant to be thread safe,
it can not be used with g_object_add_weak_pointer(),
instead, one must use GWeakRef. But since it is in the API,
document that fact and add a couple assertions to make sure
it doesn't get broken in the future.
2015-07-24 19:59:20 -04:00
Olivier Crête
ae9dec4cc3 validate-scenario: Use GLib functions to make sure GMainContext is used 2015-07-24 19:59:15 -04:00
Olivier Crête
0a17bfc2be scenario: Only modify the actions from the main thread
The action's content is not protected by a mutex, so only
modify it from the main thread.
2015-07-24 17:06:47 -04:00
Olivier Crête
1599c1abd8 gitignore: Add more generated files 2015-07-24 17:06:29 -04:00
Vineeth T M
7e91f73c76 validate-scenario: get duration from media_info if not able to query
In case of files, which don't have duration in header, baseparse
estimates the duration only after 1.5 seconds. But Async_done event
is sent before the duration is estimated, which results in error.
If duration query fails, getting the duration from the media-info being
passed through --set-media-info. If media-info is also not set,
printing an error message and throwing error.

https://bugzilla.gnome.org/show_bug.cgi?id=752521
2015-07-22 16:46:43 +01:00
Vineeth T M
aa6aebe41e validate:launcher: add quotes to the file path
When folder name contains space or other special characters,
it fails to recognise the same and error is thrown. Adding the path
inside  to recognise the same

https://bugzilla.gnome.org/show_bug.cgi?id=752611
2015-07-22 16:40:07 +01:00
Vineeth T M
074406bc2c validate:launcher: unquote the path to remove special characters
When getting path from url using, url2path, it is returning
special characters (%20 for space etc..), instead of returning
plain path. path.unquote replaces the same..

https://bugzilla.gnome.org/show_bug.cgi?id=752611
2015-07-22 16:39:43 +01:00
Vineeth TM
e4906c7289 validate:launcher: return on error cases properly
When folder name contains spaces during --medias-paths, it does not
create the media info, but still it shows as passed.
Returing failed during this case

https://bugzilla.gnome.org/show_bug.cgi?id=752611
2015-07-22 16:39:24 +01:00
Vineeth TM
6bf6fe7dec validate:launcher: handle file path in --medias-paths
right now --medias-paths accepts only directories. Added support to
accept file path as well.

https://bugzilla.gnome.org/show_bug.cgi?id=752692
2015-07-22 16:35:49 +01:00
Vineeth T M
6c48e89aab validate:launcher: skip default media path for --media-paths option
when --media-paths is specified, then no need to check the default media.
And add Force argument to let testsuite force the inclusion of
default media directory.

https://bugzilla.gnome.org/show_bug.cgi?id=752461
2015-07-16 16:31:09 +02:00
Thibault Saunier
89283ef3fe validate:ssim: Fix calls to the converters
We were mixing them
2015-07-16 16:30:52 +02:00
Vineeth T M
1ef0fdd66c validate:main.py: trivial document fixes
gst-validate-launch is being used instead of gst-validate-launcher
in a couple of places.

https://bugzilla.gnome.org/show_bug.cgi?id=752455
2015-07-16 09:35:17 +02:00
Thibault Saunier
0826c87136 validate:gtk: Handle the case were we are 'pressing' only a modifier 2015-07-14 20:31:59 +02:00
Guillaume Desmottes
09145cc56b validate: don't store the full description struct
Summary:
When running valgrind we'll have 2 scenarios loaded (the normal one and
"setup_sink_props_max_lateness.scenario"). The loading code shouldn't assume
which one will contain the description it actually care about and so just look
for the fields it actually needs.

Reviewers: thiblahute

Differential Revision: http://phabricator.freedesktop.org/D199
2015-07-14 18:28:34 +02:00
Thibault Saunier
11b1ae5f3b validate:scenario: Report EVENT_SEEK_NOT_HANDLED as reported error on error 2015-07-14 18:16:40 +02:00
Thibault Saunier
b02e422519 validate: Document the GST_VALIDATE_CONFIG environment variable 2015-07-13 16:36:15 +02:00
Thibault Saunier
5e2451da62 validate:scenario: Implement a config to set the interval between action calls
Allowing users to decide the time between which the action should be
executed. In some cases executing on idle might lead to action not
being executed fast enough so the user might want to force an interval
in that case.
2015-07-13 16:36:15 +02:00
Thibault Saunier
96d5d0ab27 Back to development 2015-06-24 17:43:53 +02:00
Thibault Saunier
bab3d99744 Release 1.5.2 2015-06-24 17:42:16 +02:00
Thibault Saunier
5edea350f6 validate:scenario: Reset seeked_in_paused when wrong position detected
+ Lower some debug output to LOG
2015-06-24 16:25:24 +02:00
Thibault Saunier
8e37c81811 validate:ssim: Inform about min average and min minimum similarities 2015-06-24 16:25:24 +02:00
Tim-Philipp Müller
de40a24b8f validate: spelling fixes
analize != analyze
2015-06-14 22:44:26 +01:00
Wonchul Lee
9ea5df9c98 validate: media-check: add newline to end of print statements
https://bugzilla.gnome.org/show_bug.cgi?id=750089
2015-06-14 22:41:12 +01:00
Wonchul Lee
953db96ede validate: media-check: fix double unref in error code path
Writer would get unrefed twice when it could not parse the file.

https://bugzilla.gnome.org/show_bug.cgi?id=750606
2015-06-13 19:28:19 +01:00
Tim-Philipp Müller
736ecef382 validate: tools: fix build
/usr/bin/ld: gst-validate-images-check.o: undefined reference to symbol 'gst_init'
/home/tpm/gst/glib-master/gstreamer/gst/.libs/libgstreamer-1.0.so.0: error adding symbols: DSO missing from command line
2015-06-13 19:25:17 +01:00
Thibault Saunier
06cca8a5b3 validate:ssim: Make position reporting parseable by the launcher 2015-06-12 12:42:42 +02:00
Thibault Saunier
3a1facdb45 validate:ssim: Print better information about execution 2015-06-12 12:42:40 +02:00
Thibault Saunier
245eb9d0f9 validate: print REPORTER->name when passed as source in validate_printf 2015-06-12 12:41:59 +02:00
Thibault Saunier
3e978a46b4 validate:launcher: Avoid printing twice env variables
When printing test command.
2015-06-12 11:31:13 +02:00
Thibault Saunier
ab7e9930d1 validate:tools: Cleanup Makefile.am
Removing useless CFLAGS and LIBS
2015-06-09 10:52:38 +02:00
Wonchul Lee
de6b24d905 validate:media-descriptor-writer: cleanup get tag code
https://bugzilla.gnome.org/show_bug.cgi?id=750609
2015-06-09 10:18:00 +02:00
Thibault Saunier
8b38d4745b validate: Do not define GstValidateOverride type twice 2015-06-08 18:58:46 +02:00
Thibault Saunier
7dd8bae7c2 validate: Fix make distcheck 2015-06-08 18:20:33 +02:00
Thibault Saunier
c206569a64 validate: Generate documentation for Validate plugins
Summary: Depends on D215

Reviewers: Mathieu_Du

Differential Revision: http://phabricator.freedesktop.org/D216
2015-06-08 17:40:32 +02:00
Thibault Saunier
6e5bddf54e validate: Add a validate ssim plugin
Summary:
 + Bump gst-video dependency to 1.4 as we need GstVideoConvert

 Depends on D213: validate: Mark gst_validate_report a G_GNUC_PRINTF

Reviewers: Mathieu_Du

Differential Revision: http://phabricator.freedesktop.org/D215
2015-06-08 17:40:32 +02:00
Thibault Saunier
dbcb6d5614 validate: Mark gst_validate_report a G_GNUC_PRINTF
Summary:
And fix the issue it raised

Reviewers: Mathieu_Du

Differential Revision: http://phabricator.freedesktop.org/D213

Depends on D211
2015-06-08 17:40:32 +02:00
Thibault Saunier
1dc3816943 validate: Add a gst-validate-images-check tool
Summary:
That is a new tool that uses ssim algorithm to compare images

+ Add a GstValidateVideo internal library adding an helper Gssim class

Depends on D210

Reviewers: Mathieu_Du

Differential Revision: http://phabricator.freedesktop.org/D211
2015-06-08 17:40:32 +02:00
Thibault Saunier
bf610de0d6 validate:utils: Add a utility to get a GstClockTime from a structure
Summary:
Properly handling the different types that can represent ClockTime

Make use of it in gst_validate_action_get_clocktime

API: gst_validate_utils_get_clocktime

Depends on D209

Reviewers: Mathieu_Du

Differential Revision: http://phabricator.freedesktop.org/D210
2015-06-08 17:40:32 +02:00