Previous usage of the property proxy-target seemed to alternate between
the two definitions:
+ The asset we are the default proxy of
+ The asset we are in the proxy list of
Now, the latter definition is used, which seems more useful to a user
since knowing the latter can easily allow you to find out the former.
The previous behaviour of ges_asset_set_proxy (asset, NULL) was not very
clear. It is now defined so that it clears all the proxies for 'asset'.
This means that after this call, the GESAsset:proxy property will indeed
be NULL.
Also fixed:
+ We can call ges_asset_set_proxy (asset, proxy) when 'proxy' is already
in the proxy list of 'asset'.
+ Handling of removing the default proxy in ges_asset_unproxy. This was
sending out the wrong notifies.
+ Prohibiting circular proxying. Before we could only prevent one case,
we should now be able to prevent all cases. This will prevent a hang
in ges_asset_request.
Fix the ownership in ges_asset_request. This should be transfer-full,
but for proxies it would fail to add a reference. Also,
ges_asset_cache_put was leaking memory if the asset already existed.
We should not be accepting ges_asset_set_proxy (NULL, proxy) as part of
the API! This behaviour was used internally in combination with
ges_asset_try_proxy, which is called on a still loading asset, so it was
moved to ges_asset_finish_proxy.
Previously, we tested that the given priority was `>0`, when it seems
that `>=0` was intended. A priority of `-1` means leave the priority
unchanged, whilst a priority of 0, or more, means move to this layer
priority.
Stop overwriting the ->list_children_properties virtual method in
subclasses because the timeline element class handles everything itself
anyway.
Note that containers already automatically add the children properties of
their child elements in ges_container_add.
Previously, we were setting the inpoint_offset using the start offset in
the duration callback!
Also added a notify for when the duration is changed in the child start
callback.
Previously, either the track or track_type arguments had to be specified
in order to find **any** track elements. Now, you can specify neither,
which will match any track element, of the specified type.
If a clip is already part of a layer, then adding it to another layer
should fail. Previously, in this case, `ges_layer_add_clip` was adding a
reference to the clip instead, without subsequently giving up ownership.
This meant that the clip would be left with an unowned reference.
This has now been corrected by also calling `unref` after the
`ref_sink`.
Note that, since `clip` is already part of `current_layer`, it should
already be non-floating, so the `ref_sink`-`unref` should do nothing
overall. But we keep both to make the ownership (transfer floating/none)
explicit.
The method steals ownership of `copied_from`, so should be responsible
for unreffing it. Also make sure we fail when `layer != -1`, since this
functionality is not supported.
We try to do our best to have the video frames scaled the best way
to fill most space on the final frames, keeping aspect ratio. The user
can later on rescale or move the sources as usual but it makes the
default behaviour a better and more natural especially now that we
set default restriction caps to the video tracks.
And fix the unit test to take that change into account
This way the user can easily know how the clip would look like
if no scaling was applied to the clip, this is useful to be able
to properly position the clips with the framepositionner element.
We used to always call the `->set_child_property` virtual method
of the object that `ges_timeline_element_set_child_property` was called
from, but that means that, in the case of referencing GESContainer
children properties from its children, the children wouldn't know
what child property have been set, and the children override wouldn't
be takent into account, in turns, it means that the behaviour could be
different in the setter depending on parent the method was called,
which is totally unexpected.
We now make sure that the vmethod from the element that introduced the
child property is called whatever parent method is called, making the
behaviour more uniform.
Fix the python override to make sure that new behaviour is respected.
By default, video track output full HD@30fps, this makes the behaviour
of clip position much more understandable and guarantess that we
always have a framerate.
The user can modify the values whenever he wants
Basically we were advertising that the source size would be the
size of the track if it hadn't been defined by end user, but since
we started to let scaling happen in the compositor, this is not true
as the source size is now the natural size of the underlying video
stream.
Remove the unit test and reimplemented using a validate scenario which
make the test much simpler to read :=)
Basically we know that if we are using mixing, compositor will be
able to do video conversion and scaling for us, so avoid adding those
usless elements.
This optimizes a lot caps negotiation for deeply nested timelines.
In general, brought the behaviour of the `start`, `duration` and
`inpoint` setters in line with each other. In particular:
1. fixed return value the GESSourceClip `duration` setter
2. changed the GESClip `start` setter
3. fixed the inpoint callback for GESContainer
4. changed the type of `res` in GESTimelineElement to be gint to
emphasise that the GES library is using the hack that a return of -1
from klass->set_duration means no notify signal should be sent out.
Also added a new test for clips to ensure that the setters work for
clips within and outside of timelines, and that the `start`, `inpoint`
and `duration` of a clip will match its children.
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
We clearly uniquely identify assets by both their IDs and their
extractable type, and we should make sure that you can have a
TrackElement and a Clip with the same ID.
There is one exception in our implementation which is GESFormatter
because we treat their subclasses as 1 type with different IDs.
Corrected typo that attached project_loaded_cb, rather than error_loading_asset_cb, to ::error-loading-asset, which meant data.error would be left unset if an error occurred in loading.
ges-xml-formatter.c: In function ‘_parse_asset’:
ges-xml-formatter.c:357:7: error: ‘gst_uri_construct’ is deprecated: Use 'gst_uri_new' instead [-Werror=deprecated-declarations]
357 | id = gst_uri_construct ("file", subproj_data->filename);
| ^~
ges-uri-asset.c: In function ‘create_discoverer’:
ges-uri-asset.c:53:1: error: old-style function definition [-Werror=old-style-definition]
53 | create_discoverer ()
| ^~~~~~~~~~~~~~~~~
ges-uri-asset.c: In function ‘get_discoverer’:
ges-uri-asset.c:67:1: error: old-style function definition [-Werror=old-style-definition]
67 | get_discoverer ()
| ^~~~~~~~~~~~~~
CC libges_1.0_la-ges-auto-transition.lo
ges-asset.c: In function ‘_get_type_entries’:
ges-asset.c:489:1: error: old-style function definition [-Werror=old-style-definition]
489 | _get_type_entries ()
| ^~~~~~~~~~~~~~~~~
Implement lazy loading asset cache so gesdemux use the formatters
assets while GES hasn't been initialized.
And set extensions to temporary files as some formatters require
the information (otio)
Uses the file extension as hint falling back to the default formatter
if none is found
Make use of that function in when saving a project and not formatter
is specified.
This method is useful when implementing a formatter outside
GES that end up converting to xges and uses the default formatter
to finally load the timeline.
Adding a property to let the application know
Also make sure that the duration of nested timeline assets is reported
as CLOCK_TIME_NONE as those are extended as necessary.
And make a difference between asset duration and their max duration
As nested timelines can be extended 'infinitely' those max duration
is GST_CLOCK_TIME_NONE, but their duration is the real duration of
the timeline.
When we have nested timelines, we need to make sure the underlying
formatted file is reloaded when commiting the main composition to
take into account the new timeline.
In other to make the implementation as simple as possible we make
sure that whenever the toplevel composition is commited, the decodebin
holding the gesdemux is torn down so that a new demuxer is created
with the new content of the timeline.
To do that a we do a NleCompositionQueryNeedsTearDown query to which
gesdemux answers leading to a full nlecomposition stack
deactivation/activation cycle.
