While preparing a blist for pushing, some RTP header extension may
request caps change for a specific buffer in the list. When this
happens, depayloader should immediately push those buffers from the list
that precede the currently processed buffer (for which the caps change
was requested) and only then apply the new caps to the src pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1011>
User often want to set encoder properties on encoding profiles,
this introduces a way to easily 'preset' properties when defining the
profile. This uses GstStructure to define those properties the same
way it is done in `splitmux` for example as it makes simple to handle.
This also defines a more complex structure type where we can map a set
of properties to set depending on the muxer/encoder factory that has
been picked by EncodeBin so it is quite flexible.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1002>
These parameters are incorrectly regarded as mutable in G-IR making them
"incompatible" with languages that are explicit about mutability like
Rust. In order to clean up the code and expected API there, update the
signatures here, right at the source (instead of overriding them in
Gir.toml and hoping for the best).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1005>
First: the buffer is pushed on the encoding filesink only *after* the
checkpoints, leading to wrong ordering in expectations.
The second one is about EOS being posted on the bus *before* the
stop action is executed, leading to the action never being executed.
That action was plain useless as the default behavior of validate
scenario is to internally create a "stop" action on EOS (unless
disabled by user).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/968>
Add a way for applications to specify that the underlying file is
growing which implies that the source won't EOS when reaching the end
of the file but instead start monitoring it and start reading it again
whenever a change is detected.
Also add a validate test to check the behavior
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/937>
We've been allowing only a few known chroma-site values such as
jpeg (not co-sited), mpeg2 (horizontally co-sited) and
dv (co-sited on alternate lines). That's insufficient for
representing all possible chroma-site values. By this commit,
we can represent any combination of chroma-site flags.
But, an exception here is that any combination with
GST_VIDEO_CHROMA_SITE_NONE will be considered as invalid value.
For any combination of chroma-site flags,
gst_video_chroma_to_string() method is deprecated in order to
return newly allocated string via a new gst_video_chroma_site_to_string()
method. And for consistent API naming, gst_video_chroma_from_string()
is also deprecated. Newly written code should use
gst_video_chroma_site_from_string() instead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/927>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the src caps, then an
extension implementation will be requested but is not required to be able
to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
New signals are added for managing the internal list of rtp header
extension implementations read by a specific depayloader instance.
If the 'extmap-$NUM' field is present in the sink caps, then an
extension implementation will be requested but is not requited to be
able to negotiate correctly. An extension will be requested using the
'request-extension' signal if none could be found internally.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/748>
.. and make use of that API in videoaggregator.
When setting certain properties, such as cropping or the scaled
size of pads, a new converter is created by videoaggregator.
Before that patch, this implied spawning new threads, potentially
at each aggregate cycle when interpolating pad properties. This
is obviously wasteful, and re-using a task pool removes that
overhead.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/896>
In the case `videoaggregator` is set as allowing format conversions,
and as we convert only on the sinkpads, we should ensure that the
chosen format is usable by the subclass. This in turns implies
that the format is usable on the srcpad.
When doing conversion *any* format can be used on the sinkpads, and this
is the only way that we can avoid race conditions during renegotiations
so we can not change that fact, we just need to ensure that the chosen
intermediary format is usable, which was not actually ensured before
that patch.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/834
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/909>
We validate the header extensions length of an RTP buffer by comparing
it against the block size. Since we multiply the length in words by 4 to
get the length in bytes, a suitably large length could cause a wrapround
of the uint16, giving a lower length which erroneously passes the check
and allows the buffer to be mapped.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/864>
Occasionally, a clean build would fail like this:
In file included from ../subprojects/gst-plugins-base/tests/examples/gl/gtk/gstgtk.c:24:
../subprojects/gst-plugins-base/gst-libs/gst/gl/gl.h:25:10: fatal error: gst/gl/gl-enumtypes.h: No such file or directory
25 | #include <gst/gl/gl-enumtypes.h>
| ^~~~~~~~~~~~~~~~~~~~~~~
Add the missing dependency so that the headers are generated beforehand.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/855>
Rename remaining `gst_video_color_transfer_{encode,decode}` functions on
the `GstVideoTransferFunction` enumeration to
`gst_video_transfer_function_{encode,decode}` permitting
gobject-introspection to turn these into associated functions and place
them under the respective `<enumeration>` block in gir XML files.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/805>
Don't run the harness in live mode, or otherwise it would output frames
already in the very beginning before a buffer was provided to it due to
timeout.
Also send EOS/a second buffer before pulling a buffer as videoaggregator
has one frame of latency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/812>
The type is called GstVideoTransferFunction so the function names should
match, otherwise gobject-introspection is keeping the functions as
global functions instead of methods on the type.
The same mistake was also made in lots of other APIs over the years, but
here we can at least fix it for 1.18 still.
Thanks to Marijn Suijten for noticing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/807>
Call gst_aggregator_selected_samples() after filling the queues
(but before preparing frames).
Implement GstAggregator.peek_next_sample.
Add an example that demonstrates usage of the new API in combination
with the existing buffer-consumed signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/728>
This adds linear 32x32 NV12 based tiles. This format is notably used by
Allwinner VCU and exposed in V4L2 as being "SUNXI Tiled" format. In this
patch we generalize the plane info calculation so we can share this part
with the 4L4 variant.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/754>
