Create a function to do the pad cleanup of the GstSourceCombine struct
and use it to not forget to also cleanup the sink pad and fix a memory
leak.
https://bugzilla.gnome.org/show_bug.cgi?id=741198
In some cases, the user might want the stream outputted by encodebin to
be in the exact same format during all the stream. We should let the
user specify when this is the case. This commit add some API in the
GstEncodingProfile to determine whether the format can be renegotiated
after the encoding started or not.
API:
gst_encoding_profile_set_allow_dynamic_output
gst_encoding_profile_get_allow_dynamic_output
https://bugzilla.gnome.org/show_bug.cgi?id=740214
Before we were setting them to PAUSED and (much) later connecting to
their source pad caps notify signal.
There was a race where that demuxer was pushing a caps and later a buffer
on its source pad when we were not even connected to its source pad caps notify
signal leading to decodebin missing the information and not keeping on
building the pipeline on CAPS event thus the demuxer was posting an ERROR
(not linked) message on the bus. This need to be done for 'simple
demuxers' because those have one ALWAYS source pad, not like usual demuxers
that have several dynamic source pads.
A "simple demuxer" is a demuxer that has one and only one ALWAYS source
pad.
https://bugzilla.gnome.org/show_bug.cgi?id=740693
There was a race where:
1) we would put the element to PAUSED
2) It would get data sent to it from upstream
3) It would thus send caps
3) caps_notify_cb would continue autoplugging
4) caps would flow downstream, the last pad would get exposed
5) we were still not done sending the sticky events
Taking the stream lock on the new element's sinkpad and only
releasing it when sticky events have all been sent prevents
the caps from reaching the source pad of the element before
we're all set.
https://bugzilla.gnome.org/show_bug.cgi?id=740694
Otherwise the following can happen:
1. set mute=true
2. play media1 (Ok)
3. play media without audio (audiochain removed)
4. play media2 (audiochain created, mute=*false*)
https://bugzilla.gnome.org/show_bug.cgi?id=740675
There's no reason why we would have to wait for the next buffer to decide
whether to output the current one or not. We just have to check if the
current one is earlier than our expected next time, which is the previous
frame timestamp plus the expected frame duration.
https://bugzilla.gnome.org/show_bug.cgi?id=740018
If there are two parser elements available for the same media format,
then decodebin is autoplugging an extra capsfilter and parser irrespective
of caps and rank. So restrict the decodebin from autoplugging multiple parser
elements back to back in adjacent positions with in a single DecodeChain
for the same media format.
https://bugzilla.gnome.org/show_bug.cgi?id=738416
timestamp_offset is being declared as an int64 variable,
for which the min
value of G_MININT64 is -9223372036854775808
Changing the minimum and maximum limit for the offset variable.
https://bugzilla.gnome.org/show_bug.cgi?id=738568
The "iradio-mode" property used to have a default FALSE value in HTTP
source elements but now it should default to TRUE or just do not exist
as a property so it is not really needed to set it any more in
uridecodebin.
Apart from that this code could've never worked as uridecodebin looks for a
string-typed iradio-mode property, but it's a boolean in all sources.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725383
It is better to use storel to splat the variable into the destination.
ORC doesn't know when a variable is last written to so it can't yet optimize
away the copy operation.
Support lanczos scaling method for NV12 and NV21 formats.
Scale the 'Y' plane and scale 'NV' plane.
Implementation for submethods - int16, int32, float and double
https://bugzilla.gnome.org/show_bug.cgi?id=737400
Move the conversion code used in videoconvert to the video library
and expose a simple but generic API to do arbitrary conversion. It can
currently do colorspace conversion but the plan is to add videoscale to
it as well.
See https://bugzilla.gnome.org/show_bug.cgi?id=732415
audioresample and videoscale is something the application will have to do if
required, but we can at least help here by adding the
audioconvert/videoconvert elements.
https://bugzilla.gnome.org/show_bug.cgi?id=735748
When switching URI from about-to-finish, playbin starts decoding the new
URI and the queue2 inside uridecodebin starts emitting buffering messages
immediately. However, the queue(s) inside playsink still have buffers to
play and the pipeline doesn't need to pause for buffering, so we should
not send those buffering messages up to the application, otherwise there
is an audible glitch caused by pausing the pipeline for a very short time.
https://bugzilla.gnome.org/show_bug.cgi?id=727255
when downsampling, the output buffer can be filled before all the input
samples are consumed. this is correct: when downsampling, several input
samples are needed for each output sample, so when only a small number of
input samples are available the number of output samples produced can be 0.
the resampler, however, was discarding those extra input samples instead of
clocking them into its filter history for the next iteration. this patch
fixes this by removing the check that the output buffer is full. the code
now always loops until all input samples are consumed, and relies on the
calling code to have provided a suitably sized location for the output.
note that there are already other checks in place in the calling code to
ensure that this is the case.
https://bugzilla.gnome.org/show_bug.cgi?id=732908
If we had plugins and an error occurred we only include the error message
caused by this, otherwise we will include the codec description as generated
from the caps.
This allows to detect which exact codec was missing instead of getting a
generic "no suitable decoders found" error message.
Otherwise we might change some capsfeatures from ANY to the specific
value from the filter and do not filter those out in case the
sink doesn't support them
https://bugzilla.gnome.org/show_bug.cgi?id=734822
Gracefully handle switching groups that all pads are deadend.
This can happen when quickly switching programs on mpegts as the
output is unaligned it can happen that not enough data was accumulated at
parsers to generate any buffers, causing the stream to receive EOS before
any data can be decoded.
To handle this scenario, the _expose function now also gets if there is
any next group to be exposed along with the list of endpads. If there are
no endpads and there is another group to expose it will switch to this next
group and then retry exposing the streams.
Also, the requirement to only switch from the chain that has the endpad had
to be modified to care for when the drainpad is NULL
https://bugzilla.gnome.org/show_bug.cgi?id=733169
Set up a fakesink with a pad probe to replace the missing encoder to detect
if encoding was really required and only error out in this case. Otherwise
just let passthrough branch work.
This delays the error posting from the set_state function to when buffers
are really flowing. Unit test updated accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=650652
Unsetting DISCONT flag means we need to copy the buffer. This copy operation
mandates that all GstMemory should be copy-able which is not always the case
https://bugzilla.gnome.org/show_bug.cgi?id=727409
We now add all our elements to uridecodebin *after*
GstBin::change_state(READY->PAUSED), so we need to post async-start
and async-done messages ourselves if we want to work async.
https://bugzilla.gnome.org/show_bug.cgi?id=733495
We now add all our elements to uridecodebin *after*
GstBin::change_state(READY->PAUSED), so we need to post async-start
and async-done messages ourselves if we want to work async.
https://bugzilla.gnome.org/show_bug.cgi?id=733495
otherwise we're going to
a) start Parser/Converter before they are linked to their capsfilter,
breaking their negotiation of a proper stream format
b) start demuxers without having connected to their pad-added signals. We
miss pads and in the worst case don't link any pads at all
... and if this fails for whatever reason we skip the element and instead
try with the next element. This allows us to handle elements that fail
when setting caps on them by just skipping to the next alternative element.
They might fail to go to PAUSED, and when connecting them further
we might already expose their srcpads on decodebin if we're unlucky.
This prevents us to handle failures going to PAUSED gracefully.
If the caps query returned us fixed caps this doesn't mean yet
that these caps are actually complete (fields might be missing).
It allows to do us some decisions, but the selection of the next
element should be delayed as only complete caps allow proper selection
of the next element.
Otherwise we might try to continue autoplugging e.g. for a specific
stream-format although the parser could convert to something else, thus giving
us potentially less options for decoders.
We can't convert to ANY capsfeatures, they are only there so that we
can passthrough whatever downstream can support... but we definitely
don't want to return them to upstream.
