Original commit message from CVS:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c: (parse_header), (get_xing_offset),
(has_xing_header), (generate_xing_header),
(gst_xing_mux_base_init), (gst_xing_mux_finalize), (xing_reset),
(gst_xing_mux_init), (gst_xing_mux_chain),
(gst_xing_mux_sink_event), (gst_xing_mux_change_state):
* gst/xingheader/gstxingmux.h:
Major cleanup and rewrite of xingmux with less bugs and new features:
- Handles other layers as 3
- Write TOC
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code):
Small meaningless cleanup.
* gst/mpegvideoparse/mpegvideoparse.c: (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain_forward),
(scan_keyframe), (gst_mpegvideoparse_flush_decode),
(gst_mpegvideoparse_chain_reverse), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state):
* gst/mpegvideoparse/mpegvideoparse.h:
Track segment events.
Do the first part of reverse playback by sending data between two
I-frames to the decoder.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* ext/musicbrainz/gsttrm.c:
Don't emit signiture when going to READY, because it might
not be ready.
* ext/nas/nassink.c:
Remove useless call that sleeps for 5 seconds. Yup, it calls
sleep(1) 5 times. Go NAS.
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfbdecoder.c:
Initialize our debug categories properly.
* gst/rawparse/gstrawparse.c:
Don't register element details for a non-element. Be much more
rude when subclass doesn't set a pad template (assert!). Don't
unref the pad template; we don't own it.
* gst/videosignal/gstvideoanalyse.c:
Initialize debug category.
* tests/check/Makefile.am:
Ignore nassink element in tests because it has unavoidable
long timeouts.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Remove videoparse element, because it was moved to gst/rawparse/
Original commit message from CVS:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_src_event):
Always seek on frame boundaries, will produce nothing useful
otherwise.
Original commit message from CVS:
* configure.ac:
* gst/rawparse/Makefile.am:
* gst/rawparse/README:
* gst/rawparse/gstaudioparse.c: (gst_audio_parse_format_get_type),
(gst_audio_parse_endianness_get_type), (gst_audio_parse_base_init),
(gst_audio_parse_class_init), (gst_audio_parse_init),
(gst_audio_parse_set_property), (gst_audio_parse_get_property),
(gst_audio_parse_update_frame_size), (gst_audio_parse_get_caps):
* gst/rawparse/gstaudioparse.h:
* gst/rawparse/gstrawparse.c: (gst_raw_parse_base_init),
(gst_raw_parse_class_init), (gst_raw_parse_init),
(gst_raw_parse_dispose),
(gst_raw_parse_class_set_src_pad_template),
(gst_raw_parse_class_set_multiple_frames_per_buffer),
(gst_raw_parse_reset), (gst_raw_parse_chain),
(gst_raw_parse_convert), (gst_raw_parse_sink_event),
(gst_raw_parse_src_event), (gst_raw_parse_src_query_type),
(gst_raw_parse_src_query), (gst_raw_parse_set_framesize),
(gst_raw_parse_set_fps), (gst_raw_parse_get_fps),
(gst_raw_parse_is_negotiated):
* gst/rawparse/gstrawparse.h:
* gst/rawparse/gstvideoparse.c: (gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type), (gst_video_parse_base_init),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_frame_size), (gst_video_parse_get_caps):
* gst/rawparse/gstvideoparse.h:
* gst/rawparse/plugin.c: (plugin_init):
Add new plugin rawparse that contains a base class for raw data
parsers and the two elements audioparse and videoparse that can
be used to parse raw audio and video. These are inspired by the
old videoparse element which the new rawparse plugin deprecates.
Original commit message from CVS:
2007-12-18 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (enum, gst_selector_pad_class_init)
(gst_selector_pad_get_property)
(gst_selector_pad_get_running_time)
(gst_stream_selector_class_init, gst_segment_get_timestamp)
(gst_segment_set_stop, gst_segment_set_start)
(gst_stream_selector_set_active_pad, gst_stream_selector_block)
(gst_stream_selector_push_pending_stop)
(gst_stream_selector_switch): Change so that the signals and
properties deal in running time, not buffer time. Document the
signals more. Change uint64 in API to int64, to reflect what's in
GstSegment.
Original commit message from CVS:
* gst/multifile/gstmultifilesrc.c:
* gst/multifile/gstmultifilesrc.h:
When subsequent files are read, if the file doesn't exist, send
an EOS instead of causing an error.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_chain): Return OK when
a buffer is ignored, not NOT_LINKED. No sense in making a source
element error out; at least fdsrc considers NOT_LINKED to be a
fatal error. Patch 11/12. There is no patch 12/12. Foo.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch-marshal.list:
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init)
(gst_stream_selector_block): Make the block() signal return the
last stop time of the active pad. Patch 10/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_selector_pad_get_property)
(gst_selector_pad_class_init, gst_stream_selector_class_init)
(gst_stream_selector_get_property): Expose 'last-stop-time' as a
pad property, not an element property.
(gst_selector_pad_chain): Mark the last_stop time as timestamp +
duration, not timestamp. Patch 9/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_change_state)
(gst_stream_selector_block, gst_stream_selector_switch): Use the
cond mechanism instead of blocked pads. Patch 8/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector):
* gst/switch/gstswitch.c (gst_stream_selector_wait)
(gst_selector_pad_chain, gst_stream_selector_init)
(gst_stream_selector_dispose): Add infrastructure for new blocking
mechanism that does not use gst_pad_set_blocked, which does not
work on sink pads. Patch 7/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelector): Add some
state variables.
* gst/switch/gstswitch.c (gst_stream_selector_push_pending_stop)
(gst_selector_pad_chain): Push any pending stop event.
(gst_stream_selector_set_active_pad)
(gst_stream_selector_set_property): Factor out setting the active
pad to a function. Close the segment of the previous active pad if
told to do so via a stop_time != GST_CLOCK_TIME_NONE.
(gst_stream_selector_switch): Implement switch vmethod. Patch 5/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_stream_selector_block): Implement
the block() signal. This implementation will be replaced in future
patches, however. Patch 4/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h (struct _GstStreamSelectorClass):
* gst/switch/gstswitch.c (gst_stream_selector_class_init): Add
`block' and `switch' signals.
* gst/switch/Makefile.am:
* gst/switch/gstswitch-marshal.list: Add foo to generate a
marshaller for the `switch' signal. Patch 2/12.
Original commit message from CVS:
2007-12-17 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.h:
* gst/switch/gstswitch.c: Replace with files from
gststreamselector.[ch], registered as the "switch" plugin, with
"GstSwitch" types. Patch 1/12.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_dispose),
(gst_video_parse_sink_event):
Free the adapter on dispose and correctly reset on newsegment events.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event),
(gst_video_parse_src_event), (gst_video_parse_src_query):
Improve duration query by first asking upstream and if it can't handle
the query try to get the duration in bytes from upstream and convert.
For seeks, try if upstream handles this already first and do our
conversion to byte format only if it doesn't and if we get a
newsegment event in time format keep it and only do our conversions
if the event has another format.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c:
(gst_video_parse_format_get_type),
(gst_video_parse_endianness_get_type),
(gst_video_parse_class_init), (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property),
(gst_video_parse_format_to_fourcc),
(gst_video_parse_update_block_size), (gst_video_parse_chain),
(gst_video_parse_sink_event):
Add support for video/x-raw-rgb and video/x-raw-gray. Also send
downstream elements downstream, not upstream.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
Hash streams by pid again. Add a linked list inside each
stream with a list of sub_tables. Fix multiple sections
as it was borked with my last commit.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_src_event), (gst_video_parse_src_query_type):
Implement a query type function for the src pad, implement seeking
and use ANY caps for the sink pad as the element doesn't care what
caps the input has and everything is handled via properties.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_convert),
(gst_video_parse_sink_event):
Handle -1 values for the CONVERT query too.
Original commit message from CVS:
* gst/videoparse/gstvideoparse.c: (gst_video_parse_sink_event):
Add YV12 to the pad templates as it is supported too and allow
-1 as stop position for NEWSEGMENT events.
Original commit message from CVS:
* gst/videoparse/Makefile.am:
Add $(GST_PLUGINS_BASE_CFLAGS) to CFLAGS to fix the build.
* gst/videoparse/gstvideoparse.c: (gst_video_parse_init),
(gst_video_parse_set_property), (gst_video_parse_get_property):
Use g_value_[sg]et_enum() for enum properties, g_value_[sg]et_int()
gives a g_critical().
Original commit message from CVS:
* gst/videoparse/README:
* gst/videoparse/gstvideoparse.c:
Add a bunch of features: handle format specification, handle
queries and conversion. Works much like a normal parser now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Don't strdup (and thus leak) codec name strings when passing
them to gst_tag_list_add().
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
Based on patch by: <mutex at runbox dot com>
* gst/videoparse/gstvideoparse.c: (gst_video_parse_src_query):
Forward the query upstream, the default element event handler does
something different. Fixes#502879.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Fix list of supported and known codecs.
Emit tag with the codec name so it gets properly reported in totem and
other applications.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
The transform() methods are not called in passthrough mode so
there's no need for checking if the element is in passthrough mode.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
Sync the GObject properties with the controller even in passthrough
mode to get consistent property values.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
2007-12-05 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_switch_set_property): Don't push
buffers from app thread when unsetting `queue-buffers', it's
dangerous and the chain function will do it for us anyway.
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
* gst/speexresample/README:
* gst/speexresample/arch.h:
* gst/speexresample/resample.c: (resampler_basic_direct_single),
(resampler_basic_direct_double),
(resampler_basic_interpolate_single),
(resampler_basic_interpolate_double),
(speex_resampler_process_native), (speex_resampler_process_float),
(speex_resampler_process_int),
(speex_resampler_process_interleaved_float),
(speex_resampler_process_interleaved_int),
(speex_resampler_get_input_latency),
(speex_resampler_get_output_latency):
* gst/speexresample/speex_resampler.h:
Update speex resampler to latest SVN. We're now down to only the
changes noted in README again.
* gst/speexresample/speex_resampler_wrapper.h:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_query):
Adjust to API changes.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Output segment with proper 'stop' value, makes flvdemux 100% compatible
with gnonlin.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Only post the latency message if we have a resampler state already.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Also post GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/speexresample/resample.c: (speex_resampler_get_latency),
(speex_resampler_drain_float), (speex_resampler_drain_int),
(speex_resampler_drain_interleaved_float),
(speex_resampler_drain_interleaved_int):
* gst/speexresample/speex_resampler.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add functions to push the remaining samples and to get the latency
of the resampler. These will get added to Speex SVN in this or a
slightly changed form at some point too and should get merged then
again.
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_init),
(gst_speex_resample_init_state),
(gst_speex_resample_transform_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_fix_output_buffer), (gst_speex_resample_process),
(gst_speex_resample_query), (gst_speex_resample_query_type):
Drop the prepending zeroes and output the remaining samples on EOS.
Also properly implement the latency query for this. speexresample
should be completely ready for production use now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
* gst/speexresample/README:
Add README explaining where the resampling code was taken from
and which changes were done.
* gst/speexresample/resample.c: (speex_alloc), (speex_realloc),
(speex_free):
Use g_malloc() and friends instead of malloc() to achieve higher
portability and define the functions inline.
* gst/speexresample/speex_resampler.h:
Add back some useless preprocessor stuff to keep the diff between
our version and the one from the Speex SVN repository lower.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_set_property):
* gst/filter/gstlpwsinc.c: (lpwsinc_set_property):
Post a GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Remove preset iface again. We'll re-add this after its been released
in -good.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_transform):
Some small cleanup and addition of a TODO item.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_process):
If the resampler gives less output samples than expected
adjust the output buffer and print a warning.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Activate preset iface and upload two presets here.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c: (foreach_stream_clear),
(remove_all), (mpegts_packetizer_clear):
Ensure that the plugin does not crash when the property pat-info is
queried before a PAT is available. It also ensures that the PAT info is
cleared when the changing from PLAYING to READY.
Fixes#487892.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
don't forget to handle the offset's
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
precalculate some many used values
Original commit message from CVS:
patch by: Armando Taffarel Neto <taffarel@solis.coop.br>
* gst/librfb/gstrfbsrc.c:
Set the timestamp for the output buffers
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/replaygain/rganalysis.c: (yule_filter):
Avoid slowdown from denormals when processing near-silence input data.
Spotted by Gabriel Bouvigne. Fixes#494499.
Original commit message from CVS:
* gst/flv/gstflvparse.c:
Add mapping for Nellymoser ASAO audio codec.
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Make sure we
actually have data to read at the end of the tag. This avoids trying
to allocate negative buffers.
Original commit message from CVS:
* gst/equalizer/demo.c: (draw_spectrum):
* gst/spectrum/demo-audiotest.c: (draw_spectrum):
* gst/spectrum/demo-osssrc.c: (draw_spectrum):
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init):
Change the meaning of the magnitude values given in the
GstMessages by spectrum to decibel instead of
decibel+threshold.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
* gst/equalizer/gstiirequalizernbands.c:
And continue to update docs. Also include some sample code
for the n-band equalizer in the docs.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Update docs and property ranges to the real values.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c:
Now do the scaling right for real. Also initialize a previously
uninitialized variable.
Original commit message from CVS:
* gst/equalizer/demo.c:
Make default volume a bit less. Improve layout by giving more space to
the slider with big-numbers and enable fill.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (main):
Use autoaudiosink instead of alsasink and use a sine wave.
* gst/spectrum/gstspectrum.c:
Fix the magnitude calculation.
Original commit message from CVS:
* gst/equalizer/demo.c: (main):
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_class_init), (setup_filter):
Allow setting 0 as bandwidth and handle this correctly.
Also handle a bandwidth of rate/2 properly.
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_class_init):
Make it possible to generate a N-band equalizer with 1 bands. The
previous limit of 2 was caused by a nowadays replaced calculation
doing a division by zero if number of bands was 1.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/demo.c: (on_window_destroy), (on_configure_event),
(on_gain_changed), (on_bandwidth_changed), (on_freq_changed),
(draw_spectrum), (message_handler), (main):
Add small demo application based on the spectrum demo applications
that gets white noise as input, pushes it through an equalizer and
paints the spectrum. For every equalizer band it's possible to set
gain, bandwidth and frequency.
* gst/equalizer/gstiirequalizer.c: (setup_filter):
Add some guarding against too large or too small frequencies and
bandwidths. Also improve debugging a bit.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (arg_to_scale),
(setup_filter), (gst_iir_equalizer_compute_frequencies):
Replace filters with a bit better filters for which we can actually
find documentation, which don't change anything on zero gain, etc.
Make the frequency property of the bands writable, rename the
band-width property to bandwidth and change the meaning to the
frequency difference between bandedges, change the meaning of the
gain property to dB instead of a weird scale between -1 and 1 that
has no real meaning.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_request_new_pad):
Let's not call every request pad we create "sink%d", that'll
create problems if there's to be more than one pad. Fixes#490682.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/interleave.c:
Add unit test for the above.
Original commit message from CVS:
2007-10-27 Julien MOUTTE <julien@moutte.net>
* gst/mpeg4videoparse/mpeg4videoparse.c:
(gst_mpeg4vparse_align),
(gst_mpeg4vparse_drain), (gst_mpeg4vparse_chain),
(gst_mpeg4vparse_sink_setcaps), (gst_mpeg4vparse_sink_event),
(gst_mpeg4vparse_cleanup), (gst_mpeg4vparse_change_state),
(gst_mpeg4vparse_dispose), (gst_mpeg4vparse_base_init),
(gst_mpeg4vparse_class_init), (gst_mpeg4vparse_init),
(plugin_init):
* gst/mpeg4videoparse/mpeg4videoparse.h: Improved version not
damaging headers using a simple state machine.
Original commit message from CVS:
2007-10-22 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video), (gst_flv_parse_tag_type): Don't
emit no-more-pads for single pad scenarios as the header
is definitely not reliable. We emit them for 2 pads scenarios
though to speed up media discovery.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (gst_iir_equalizer_band_init),
(gst_iir_equalizer_band_get_type), (gst_iir_equalizer_class_init),
(setup_filter), (gst_iir_equalizer_setup):
* gst/equalizer/gstiirequalizer.h:
Move bandwidth property to the separate bands and add float64 support.
Original commit message from CVS:
Patch by: Richard Hult <richard imendio com>
* gst/dvdspu/Makefile.am:
Fix LIBS - we need to link against libgstreamer.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
Add request pad for getting the full transport stream coming in.
Original commit message from CVS:
* configure.ac:
Require core CVS. This is implicit in the -base CVS
requirement already, so we might just well spell it
out. Also, we do need at least 0.10.14 for
gst_element_class_set_details_simple(). Make check
for gmyth a bit more restrictive so things don't break
if the next version changes API.
* ext/alsaspdif/alsaspdifsink.c:
Work around alsa alloca macros triggering 'always evaluates to
true' warnings with gcc-4.2 and fix compilation with gcc-4.2.
Also don't leak the device string.
* ext/mpeg2enc/gstmpeg2enc.cc:
* ext/soundtouch/gstpitch.cc:
* gst/modplug/gstmodplug.cc:
Fix compilation with g++4.2 and -Wall -Werror (also needs plugin
define fix from core CVS). Fixes#462737.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
Patch by: Gautier Portet <kassoulet at gmail dot com>
* gst/xingheader/gstxingmux.c:
The size of the Xing header is actually 417 as it's rounded to the
next smaller integer. Fixes#397759.
* gst/xingheader/gstxingmux.c: (xing_generate_header),
(xing_push_header):
Some random cleanup, add FIXMEs and TODOs and check if the newsegment
event to the beginning was successful before pushing the header again.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c:
(mpegts_packetizer_stream_new):
Don't skip PAT with version number 0. Fixes#483400.
* gst/mpegtsparse/mpegtsparse.c: (mpegts_parse_apply_pat):
Make all values above 0 mark a referenced program as they can be
incremented and only 1 had marked a referenced program before, causing
actually referenced programs to be unreferenced.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
Patch by: mutex at runbox dot com
* gst/mpegtsparse/mpegtspacketizer.c:
(mpegts_packetizer_parse_adaptation_field_control):
* gst/mpegtsparse/mpegtsparse.c: (mpegts_parse_base_init),
(mpegts_parse_init), (mpegts_parse_push):
* gst/mpegtsparse/mpegtsparse.h:
Remove useless src pad that only results in not linked errors,
fix a broken pointer dereference and make MAX_CONTINUITY constant
conform to the standard to stop outputting corrupted data.
Fixes#481276, #481279.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
2007-09-27 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): I got it wrong again, audio rate
was not detected correctly in all cases.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
2007-09-26 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): codec_data is needed for every tag
not just the first one. (Fix a stupid bug i introduced without
testing)
Original commit message from CVS:
2007-09-26 Julien MOUTTE <julien@moutte.net>
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video): Fix bit masks operations to be
sure we detect the codec_tags and sample rates correctly.
Fix raw audio caps generation.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
Added offset-x, offset-y, width and height property
for selecting a region from the screen
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
Minimum raw encoding is working now
* gst/librfb/rfbdecoder.c:
fix address while reading from stream
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
raw encoding is working, but it looks like the
ffmpegcolorspace plugin can't handle high resolutions
Original commit message from CVS:
* ext/alsaspdif/alsaspdifsink.c:
* ext/timidity/gsttimidity.c:
* ext/timidity/gstwildmidi.c:
* gst/mpegvideoparse/mpegvideoparse.c:
Fix memory leaks. More to come.
* tests/check/Makefile.am:
* tests/check/generic/states.c:
Improved state change unit test.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
It is now possible to connect to a vncserver.
there are still some issues with the ouput of
the screen. Looks like some lines are confused
Original commit message from CVS:
* gst/real/gstrealvideodec.c: (gst_real_video_dec_chain),
(open_library), (gst_real_video_dec_init),
(gst_real_video_dec_set_property),
(gst_real_video_dec_get_property), (gst_real_video_dec_class_init):
* gst/real/gstrealvideodec.h:
Don't generate an error for occasional decoding errors.
Add max-errors property.
Error out when we receive max-errors in a row. Fixes#478159.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
Add password property (write only)
* gst/librfb/rfbdecoder.c:
Read the reason on failure
Use the password property for authentication
* gst/librfb/rfbdecoder.h:
Add defines for version checking
Original commit message from CVS:
* gst/librfb/Makefile.am:
* gst/librfb/d3des.c:
* gst/librfb/d3des.h:
* gst/librfb/rfbdecoder.c:
* gst/librfb/vncauth.c:
* gst/librfb/vncauth.h:
VNC Authentication should be working now
temperaly with fake password 'testtest'
Original commit message from CVS:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
Added some documentation about security handling
start implementing security handling for rfb 3.3
Original commit message from CVS:
* ChangeLog:
Add missing newline.
* gst/librfb/rfbdecoder.c:
Fix the build (missing stdlib.h).
* gst/spectrum/gstspectrum.c:
* gst/spectrum/gstspectrum.h:
Use basetransform segment so that it is correctly managed on flushes
and start/stop. Report message timestamp as stream time, which is what
an application can understand. (Yes these are adapted from wim recent
level element changes)
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
