Original commit message from CVS:
* ext/dv/gstdvdemux.c: (gst_dvdemux_handle_pull_seek),
(gst_dvdemux_loop), (gst_dvdemux_change_state):
* ext/dv/gstdvdemux.h:
When handling seek requests, don't send the newsegment event from the
calling thread. Instead save it so it can be sent from the streaming
thread.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/multipart/multipartdemux.c: (multipart_parse_header):
Accept leading whitespace before the boundary
This patch makes the demuxer allow some whitespace before the actual
boundary. This makes the demuxer work with the ``old'' gstreamer
multipartmuxer again (which placed an extra \n before the start
of the stream) Fixes#349068.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
* configure.ac:
Require CVS of GStreamer core and -base (for
GST_TAG_EXTENDED_COMMENT and gst_tag_parse_extended_comment()).
* ext/taglib/gstid3v2mux.cc:
Write extended comment tags properly (#348762).
* gst/id3demux/id3v2frames.c: (id3demux_id3v2_parse_frame),
(parse_comment_frame):
Extract COMM frames into extended comments, which makes it
easier to properly retain the description bit of the tag
and maintain this information when re-tagging (#348762).
Original commit message from CVS:
* tests/check/Makefile.am:
Don't try to run annodex unit tests if the annodex
plugin has not been built (Fixes#351116).
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_find_best):
When we can't find a usable audiosink, don't error out,
but use a fake sink instead and post a warning message
on the bus (#341278).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_resync_adapter), (gst_wavpack_parse_chain):
In push mode, re-sync to next wavpack header if sync is lost
(#351557). Also use hyphens instead of underscores in
GObject property names.
Original commit message from CVS:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtp/gstrtpmp4gdepay.c:
Caps extra properties must be defined as strings for
depayloaders because they are generated from an SDP.
* gst/rtp/Makefile.am:
* gst/rtp/gstrtp.c: (plugin_init):
* gst/rtp/gstrtph264depay.c: (gst_rtp_h264_depay_base_init),
(gst_rtp_h264_depay_class_init), (gst_rtp_h264_depay_init),
(gst_rtp_h264_depay_finalize), (decode_base64),
(gst_rtp_h264_depay_setcaps), (gst_rtp_h264_depay_process),
(gst_rtp_h264_depay_set_property),
(gst_rtp_h264_depay_get_property),
(gst_rtp_h264_depay_change_state),
(gst_rtp_h264_depay_plugin_init):
* gst/rtp/gstrtph264depay.h:
Added basic, not completely functional RFC 3984 H264 depayloader.
Original commit message from CVS:
Patch by: Jens Granseuer <jensgr at gmx net>
* gconf/Makefile.am:
Make --disable-schemas work right (they still need
to be copied to the installation directory, just not
applied). Fixes#351347 (also #344100).
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_class_init),
(gst_wavpack_parse_reset), (gst_wavpack_parse_get_src_query_types),
(gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_push_buffer), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain), (gst_wavpack_parse_sink_activate),
(gst_wavpack_parse_sink_activate_pull):
* ext/wavpack/gstwavpackparse.h:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
Make wavpackparse also work in push-mode (not seekable yet though);
some small clean-ups along the way; add support for SEEKING query
and query types function. (#351495).
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (qtdemux_redirects_sort_func),
(qtdemux_process_redirects), (qtdemux_parse_tree):
Extract all references/redirections if there is more
than one and sort them; also extract minimum required
bitrate information if available. (#350399)
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* configure.ac:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Send the newsegment event in the streaming thread.
Fixes#347529
Original commit message from CVS:
* ext/jpeg/gstsmokedec.c: (gst_smokedec_chain):
* ext/jpeg/gstsmokeenc.c: (gst_smokeenc_setcaps),
(gst_smokeenc_resync), (gst_smokeenc_chain):
Refuse sink caps in the encoder if width or height is not a
multiple of 16, the encoder does not support that yet; along the
same lines, check the return value of the encoder setup function;
also remove some debug log clutter.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.h: Add infrastructure for storing
whether a processor can work in place or not, and for keeping
track of its state. Change the FlowReturn instance variable from
"state" to "flow_state", all callers changed.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setup)
(gst_signal_processor_start, gst_signal_processor_stop)
(gst_signal_processor_cleanup): New functions to manage the
processor's state.
(gst_signal_processor_setcaps): start() as well as setup() here.
(gst_signal_processor_prepare): Respect CAN_PROCESS_IN_PLACE.
(gst_signal_processor_change_state): Stop and cleanup the
processor as we go to NULL.
* ext/ladspa/gstladspa.c (gst_ladspa_base_init): Reuse buffers if
INPLACE_BROKEN is not set.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_prepare):
Do the alloc_buffer in bytes, not frames.
Original commit message from CVS:
2006-08-04 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/ximage/ximageutil.c: (ximageutil_xcontext_get):
Fix rgb masks when recording in < 24bpp.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setcaps)
(gst_signal_processor_prepare)
(gst_signal_processor_update_inputs)
(gst_signal_processor_process, gst_signal_processor_pen_buffer)
(gst_signal_processor_flush)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull)
(gst_signal_processor_change_state): Remove the last of the code
that assumes that we process whole buffers at a time. Fix some
debugging. Seems to work now in some cases.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_process):
Fix nframes-choosing.
(gst_signal_processor_init): Init pending_in and pending_out.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): No
more default sample rate, although we never check that the sample
rate actually gets set. Something for the future.
(gst_signal_processor_setcaps): Some refcount fixes, flow fixes.
(gst_signal_processor_event): Refcount fixen.
(gst_signal_processor_process): Pull the number of frames to
process from the sizes of the buffers in the input pens.
(gst_signal_processor_pen_buffer): Remove an incorrect FIXME :)
(gst_signal_processor_do_pulls): Add an nframes argument, and use
it instead of buffer_frames.
(gst_signal_processor_getrange): Refcount fixen, pass nframes on
to do_pulls.
(gst_signal_processor_chain)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull): Refcount fixen.
* ext/ladspa/gstsignalprocessor.h: No more buffer_frames, yay.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_process):
don't query buffer-frames from caps, add lots of debug-log,
try fix for assert (#349189)
Original commit message from CVS:
2006-07-29 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/jpeg/gstsmokeenc.c: (gst_smokeenc_getcaps),
(gst_smokeenc_setcaps), (gst_smokeenc_chain):
Set caps on buffer correctly. Fixes bug #349155.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* gst/multipart/multipartdemux.c: (gst_multipart_demux_base_init),
(gst_multipart_demux_class_init), (gst_multipart_demux_init),
(gst_multipart_demux_finalize), (get_line_end),
(multipart_parse_header), (multipart_find_boundary),
(gst_multipart_demux_chain), (gst_multipart_demux_change_state),
(gst_multipart_set_property), (gst_multipart_get_property):
Uses GstAdapter instead of own buffering.
Actually parses the mime-type correctly (In tests the mime-type was
always "" with the old version).
Uses the Content-length header if available to speed up things.
Reliably autoscans the boundary name by default.
Fixes#349068.
* gst/multipart/multipartmux.c: (gst_multipart_mux_collected):
Don't start the stream with a \n.
Original commit message from CVS:
Patch by: Brian Cameron <brian dot cameron at sun com>
* sys/sunaudio/gstsunaudiosrc.c: (gst_sunaudiosrc_open):
Open source with O_NONBLOCK (#349015).
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_stream_index),
(gst_avi_demux_massage_index):
* gst/avi/gstavidemux.h:
Whitespace fixes and more debug
Original commit message from CVS:
* gst/autodetect/gstautoaudiosink.c:
(gst_auto_audio_sink_create_element_with_pretty_name),
(gst_auto_audio_sink_find_best),
(gst_auto_audio_sink_change_state):
Get rid of old and unused magic sound-server properties stuff.
Add suffix to child sink's name that makes it easy to see from
the name alone which type it actually is (alsa, oss, esd, etc.).
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_set_property), (gst_udpsrc_get_property),
(gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Rename "buffer" to "buffer-size" to make clear it is a size we set and
not some sort of feature we enable.
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Fix writing of comment frames (should be COMM not TCOM),
is still sub-optimal though, since we don't retain or
extract the comment descriptions properly (#334375,
also see #334375).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
#define 'fact' RIFF chunk if we are not compiling against
-base CVS (we don't want to depend on -base CVS for this
one define only, and also not for release order reasons).
Original commit message from CVS:
* ext/taglib/gstid3v2mux.cc:
Handle multiple tags of the same type properly. Re-inject
unparsed ID3v2 frames that we get as binary blobs from
id3demux into the tag again so we don't lose information
when retagging (#334375).
Original commit message from CVS:
* sys/ximage/gstximagesrc.c: (gst_ximage_src_class_init):
Document newly-added properties properly, so that there is a
'Since: 0.10.4' in the plugin docs. Convert some property
names into canonical GObject style (GObject will do that
internally anyway).
Original commit message from CVS:
* gst/id3demux/id3tags.c:
(id3demux_add_id3v2_frame_blob_to_taglist):
Extract frames for ID3v2 versions prior to ID3v2.3.0 properly as
well, and add the version to the blob's buffer caps, since that
information will be needed for deserialisation later on (#348644).
