Commit graph

18979 commits

Author SHA1 Message Date
Dinesh Manajipet
aa264e6b07 qmlglsink: Set qtitem's implicit width/height
This can be useful to let the layouts automatically resize qtitem
and also easily query a video's width/height from QML

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/802>
2020-11-02 13:53:46 +00:00
Sebastian Dröge
917bf649cc flvmux: Release pads via GstAggregator
See https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/797

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/801>
2020-11-02 08:46:21 +00:00
Matthew Waters
9d74a60810 qtmux: support muxing multiple codec_data for h264/h265
Each codec_data is put into its own SampleTableEntry inside the stsd.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/787>
2020-11-02 03:32:50 +00:00
Stéphane Cerveau
d664f400aa navseek: add hold_eos property
This property will tell the element to hold
the EOS event and keep it until the next
keystroke.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/792>
2020-11-01 15:19:46 +01:00
Jan Schmidt
81ecf076e8 splitmuxsrc: Fix comment in a test
Fix a comment in the splitmuxsrc robust muxing test so it
describes the test properly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Jan Schmidt
35cc0df53d splitmuxsink: Change EOS catching logic.
Add a new state for ending the overall stream, and use it to decide
whether to pass the final EOS message up the bus instead of dropping
it. Fixes a small race that makes the testsuite sometimes not generate
the last fragment(s) sometimes because the wrong EOS gets
allowed through too early.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Jan Schmidt
d12fa00195 splitmuxsink: Don't use the element state lock
Using the element state lock to avoid splitmuxsink shutting
down while doing element manipulations can lead to a deadlock on
shutdown if a fragment switch happens at exactly the wrong moment.

Use a private mutex and a shutdown boolean instead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Jan Schmidt
41ca3b4e43 splitmuxsink: Don't busy loop on a non-ready pad.
If a pad gets into the check_completed_gop method and then
the underlying conditions change on the reference context,
things could get stuck in a busy loop when the context should
instead jump back out and wait for more data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Jan Schmidt
5ac4fdeb7a splitmuxsrc: Mark running=false on shutdown.
Make sure that any late gst_element_call_async() callbacks
know that the elements is shutting down and bail out instead
of operating on the element we're trying to stop.

Fixes a spurious test failure in elements_splitmuxsrc

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Jan Schmidt
f0c24319de splitmuxsink: Forward EOS messages from async fragments.
Re-enable forwarding EOS messages from fragments that are completing
asynchronously, so that splitmuxsink itself won't go EOS until they
are complete. This was disabled to work around a bug in core that
is fixed in
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/683

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:50 +00:00
Jan Schmidt
1316dd9c65 splitmuxsink: Never start a new fragment with no reference buffers
If there has been no bytes from the reference stream muxed into
the current fragment, then time can't have advanced, there's no
GOP... this fragment would be broken or empty, so wait for some
data on the reference buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:50 +00:00
Jan Schmidt
537e7d873a qtmux: Chain up when releasing pad, and fix some locking.
Release pads by calling up into aggregator so it can do the right
things. Don't clean up the pad until after that.

 Add some missing locks around some accesses to shared pad state.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/797>
2020-10-31 02:01:10 +00:00
Stian Selnes
95579a00c0 rtpvp9depay: Improve SVC parsing, aggregate all layers
- Fix start and end of picture to support multiple layers. Start of
  picture is the first packet of the base layer, while end of picture
  is when the marker bit is set (last packet of the enhancement
  layers).
- All "layers" (aka "frames") of a picture are pushed downstream in a
  single buffer when picture is complete.
- Forgive SID=0 for enhancement layers (invalid, but Chrome and
  Firefox sends it)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/773>
2020-10-30 17:46:30 +01:00
Stian Selnes
d77fcf251b rtpvp8depay: Send lost events when marker bit is missing
This means the previous frame was incomplete.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/796>
2020-10-30 03:43:19 +01:00
Knut Saastad
fa505867a9 rtpvp9depay: detect incomplete frames and bail out
If a packet with the B bit set arrives but we haven't received
a packet with the marker or E bits set to end the previous frame,
we know the current frame was incomplete.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/795>
2020-10-30 01:31:19 +00:00
Knut Saastad
b22514d469 rtpvp9depay: detect incomplete frames and bail out
If a packet with the B bit set arrives but we haven't received
a packet with the marker or E bits set to end the previous frame,
we know the current frame was incomplete.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/769>
2020-10-29 19:56:07 +01:00
Mikhail Fludkov
346b077ae0 rtpvp*depay: possibly forward might-have-been-fec PacketLost events
This is ad adaptation of a Pexip patch for dealing with spurious
GstRTPPacketLost events caused by lost ulpfec packets: as FEC packets
under that scheme are spliced in the same sequence domain as the media
packets, it is not generally possible to determine whether a lost packet
was a FEC packet or a media packet.

When upstreaming pexip's ulpfec patches, we decided to drop all lost
events at the base depayloader level, and where the original patch
from pexip was making use of picture ids and marker bits to determine
whether a packet should be forwarded, this patch makes use of those
to determine whether they should be dropped instead (by removing their
might-have-been-fec field).

Spurious lost events coming out of the depayloader can cause the
decoder to stop decoding until the next keyframe and / or request a new
keyframe, and while this is not desirable it makes sense to forward
that information when we have other means to determine whether a lost
packet was indeed a FEC packet, as is the case with VP8 / VP9 payloads
when they carry a picture id.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/769>
2020-10-29 19:56:07 +01:00
Jan Schmidt
b066441e21 rtph264depay: Preserve SPS/PPS arrival order.
Even if SPS/PPS haven't changed, make sure to move them to the
end of the tracking array if needed, so we always know what the
most recent entries are, in case we need to discard the oldest
when generating codec_data.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/775>
2020-10-29 14:09:21 +00:00
Jan Schmidt
2623404744 rtph264depay: Warn when max SPS/PPS are collected in AVC mode.
The AVC codec_data has a flaw that it can only accomodate
31 SPS headers, even though H.264 can have 32, and 255 PPS,
when there can be 256 in H.264. When streaming RTP some
clients like to cycle through SPS/PPS ids when changing
configuration and can eventually accumulate a full set.

In that case, we have no choice but to discard one (oldest)
entry, or else the count written into the codec_data is wrong
and downstream decoding failures ensue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/775>
2020-10-29 14:09:21 +00:00
Havard Graff
63c7a9ae43 rtpjitterbuffer: don't send multiple instant RTX for the same packet
Due to us not properly acknowleding the time when the last RTX was sent
when scheduling a new one, it can easily happen that due to the packet
you are requesting have a PTS that is slightly old (but not too old when
adding the latency of the jitterbuffer), both its calculated second and
third (etc.) timeout could already have passed. This would lead to a burst
of RTX requests, which acts completely against its purpose, potentially
spending a lot more bandwidth than needed.

This has been properly reproduced in the test:
test_rtx_not_bursting_requests

The good news is that slightly re-thinking the logic concerning
re-requesting RTX, made it a lot simpler to understand, and allows us
to remove two members of the RtpTimer which no longer serves any purpose
due to the refactoring. If desirable the whole "delay" concept can actually
be removed completely from the timers, and simply just added to the timeout
by the caller of the API. But that can be a change for a another time.

The only external change (other than the improved behavior around bursting
RTX) is that the "delay" field now stricly represents the delay between
the PTS of the RTX-requested packet and the time it is requested on,
whereas before this calculation was more about the theoretical calculated
delay. This is visible in three other RTX-tests where the delay had
to be adjusted slightly. I am confident however that this change is
correct.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/789>
2020-10-28 01:22:24 +01:00
Jan Schmidt
0e84f42055 matroska-mux: Fix sparse stream crash
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/656
introduced an invalid memory access when debug is enabled, by casting
the wrong pointer to a GstCollectPad. Fixing that showed the original
change was incorrect and leads to an infinite loop in the
testsuite. This patch fixes both problems.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/788>
2020-10-28 01:55:06 +11:00
Thibault Saunier
e0b708ea4a vpx: Fix the check to unfixed/unknown framerate to set bitrate
0/1 means unknown framerate not X/0 (which is illegal).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/782>
2020-10-22 15:53:24 -03:00
Arun Raghavan
b4a713ff2d rtputils: Count metas with an empty tag list for copying/keeping
The GstMetaInfos registered in core do not set their tags to NULL, but
instead use an empty list (non-NULL list with a single NULL value).
Let's check explicitly for that so as to not miss some metas.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/779>
2020-10-22 09:19:53 -04:00
Bastien Reboulet
27ecd2c30d qmlglsink: fix crash when created/destroyed in quick succession
The crash is caused by a race condition where the render thread
calls a method on the QtGLVideoItem instance that was
previously destroyed by the main thread.
Also, less frequently, QtGLVideoItem::onSceneGraphInitialized
is called when QQuickItem::window is null, also causing a crash.

Fixes #798

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/777>
2020-10-20 18:12:20 +00:00
Sebastian Dröge
d885cc0f1a v4l2codec: Garbage collect old frames if they accumulate because of codec bugs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/778>
2020-10-19 22:04:55 +03:00
Sebastian Dröge
bcb3428ed0 v4l2codec: Pass system frame number as timestamp and use it to retrieve back frames reliably
System frame numbers are supposed to be unique and correct drivers are
passing through timestamps without modification from the output/sink to the
capture/src side.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/778>
2020-10-19 18:33:58 +03:00
Nicolas Dufresne
b113516241 rtpbin: Add clear-ssrc action
This action signal will delegate to clear-ssrc onto the rtpssrcdemux element
associated with the session. This allow rtpbin users to clear pads and
elements for a specific ssrc that is known to no longer be in use. This
happens when a pad is reused in rtpsrc or ristsrc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/736>
2020-10-16 16:45:56 +00:00
John-Mark Bell
3348c5ceae rtpvp8pay: payload temporally scaled bitstreams.
Co-Authored-By: Vincent Sanders <vince@pexip.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
Stian Selnes
29d5936749 rtpvp8pay: Add picture-id-offset property
Add property to set the initial value for picture-id. RFC7741 says
that picture-id MAY be initialized to a random value, thus it's also
valid to simply set it to a fixed initial value. A fixed value is very
useful for testing.

Default behavior is not changed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
Mikhail Fludkov
543b7e5024 rtpvp8pay: move duplicate code to separate functions
Two new functions to modify picture id:
gst_rtp_vp8_pay_picture_id_reset - picks random picture id of
appropriate bitsize
gst_rtp_vp8_pay_picture_id_increment - increments picture id taking
care of wrapping

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
John-Mark Bell
ba4b9971e9 vp8enc: expect bps for temporal-scalability-target-bitrate.
Consistency with target-bitrate is less surprising and with
modern libvpx additional configuration is required to make
temporal scaling work.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
John-Mark Bell
d9cedee042 vp8enc: finish support for temporally scaled encoding
- introduce two new properties:

    * temporal-scalability-layer-flags:

      Provide fine-grained control of layer encoding to the
      outside world. The flags sequence should be a multiple of
      the periodicity and is indexed by a running count of encoded
      frames modulo the sequence length.

    * temporal-scalability-layer-sync-flags:

      Specify the pattern of inter-layer synchronisation (i.e.
      which of the frames generated by the layer encoding
      specification represent an inter-layer synchronisation).
      There must be one entry per entry in
      temporal-scalability-layer-flags.

  - apply temporal scalability settings and expose as buffer
    metadata.

    This allows the codec to allocate a given frame to the correct
    internal bitrate allocator. Additionally, all the
    non-bitstream metadata needed to payload a temporally scaled
    stream is now attached to each output buffer as a
    GstVideoVP8Meta.

  - add unit test for temporally scaled encoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
Stéphane Cerveau
0429c24637 meson: update glib minimum version to 2.56
In order to support the symbol g_enum_to_string in various
project using GStreamer ( gst-validate etc.), the glib minimum
version should be 2.56.0.

Remove compat code as glib requirement
is now > 2.56

Version used by Ubuntu 18.04 LTS

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/774>
2020-10-15 18:21:54 +02:00
Mathieu Duponchelle
5fb5abc8a8 rtpst2022-1-fecenc: fix input seqnum check
We need to cast the incremented last seqnum to guint16 for
consistent checks on wraparound

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/770>
2020-10-14 14:30:34 +02:00
Jan Alexander Steffens (heftig)
a73ede42cf flvmux: Correct time types
- last_dts is in milliseconds, not nanoseconds as expected for
  GstClockTime. Make it a generic guint64.
- Use GstClockTime for the fields that actually contain nanoseconds.
  None of them should become negative.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/766>
2020-10-09 07:10:47 +00:00
Sebastian Dröge
6a84dc4146 rtpst2022-1-fecenc: Don't unconditionally use GLib 2.60 APIs
g_queue_clear_full() in this case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/768>
2020-10-09 09:31:27 +03:00
Mathieu Duponchelle
ed2b5e6cfc rtpulpfec: fix potential alignment issue in xor function
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753#note_646453
for context

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753>
2020-10-08 22:22:18 +00:00
Mathieu Duponchelle
591af0f38a rtpmanager: implement SMPTE 2022-1 FEC encoder
+ improve integration of FEC encoders in rtpbin

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753>
2020-10-08 22:22:18 +00:00
Mathieu Duponchelle
cff42d4c26 rtpmanager: implement SMPTE 2022-1 FEC decoder
+ improve integration of FEC decoders in rtpbin

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753>
2020-10-08 22:22:18 +00:00
Olivier Crête
7c9a5e86fe rtpfunnel: Also forward custom sticky event
This is useful to track metadata about each group of packets

Also include a unit test

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/666>
2020-10-06 20:57:49 +00:00
Thibault Saunier
6eef0967b9 isomp4: Rename GstQTMux to GstBaseQTMux to avoid breaking API
Since 52b63de19a the qtmux GType was
renamed GstQTMuxElement which breaks presets, revert that change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/755>
2020-09-30 09:18:13 -03:00
Sebastian Dröge
f95dde512c rtp: Fix allocations to support source-info property
Use gst_rtp_base_payload_allocate_output_buffer() instead of
gst_rtp_buffer_new_allocate() in order to allocate RTP buffer with
correct number of CSRCs according to the meta.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/612>
2020-09-28 15:27:17 +00:00
Stian Selnes
d494be9916 rtpvp8pay: Fix allocation to support source-info property
Use gst_rtp_base_payload_allocate_output_buffer() in order to allocate
RTP buffer with correct number of CSRCs according to the meta.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/314

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/612>
2020-09-28 15:27:17 +00:00
Matthew Waters
7736a21659 qtmux: output the correct limits in error messages
Having the current bytes being less than the limit was confusing!

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/732>
2020-09-28 15:37:12 +10:00
Matthew Waters
e81ce6f2d7 qtmux: properly support initial caps nego failure
Scenario:
- gap event causes h264parse to push made up caps that may fail checks
  inside qtmux (e.g missing codec_data).
- the caps event has already been marked as received and is sticky on
  the sink pad
- gst_qt_mux_pad_can_renegotiate() will retrieve the failed caps event
  using gst_pad_get_current_caps() and reject the correct updated caps
  with codec_data.
- Failure!

Keep track of the configured caps ourselves instead of relying on the
sticky event on the pad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/732>
2020-09-28 15:37:12 +10:00
Matthew Waters
b27dc540d0 qtmux: support non-seekable downstream mode
Write an mdat per buffer in that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/732>
2020-09-28 15:37:12 +10:00
Nicolas Dufresne
345f74b09d rtpbin: Remove the rtpjitterbuffer with the stream
Since !348, the jitterbuffer was only removed with the session. This restores
the original behaviour and removes the jitterbuffer when the stream is
removed. This avoid accumulating jitterbuffer objects into the bin when a
session is reused.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/735>
2020-09-24 09:54:05 -04:00
Nicolas Dufresne
ecc110ca8b rtpbin: Cleanup dead code
The rtpjitterbuffer is now part of the session elements, we no longer need
to do the ref_sink dance when signalling it. It is already owned by the bin
when signalled. Also, the code that handles generic session elements already
handle the ref_sink() calls since:

03dc22951b

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/735>
2020-09-23 15:48:24 -04:00
Matthew Waters
ea61714c70 rtph26*depay: drop FU's without a corresponding start bit
If we have not received a FU with a start bit set, any subsequent FU
data is not useful at all and would result in an invalid stream.

This case is constructed from multiple requirements in
RFC 3984 Section 5.8 and RFC 7798 Section 4.4.3.  Following are excerpts
from RFC 3984 but RFC 7798 contains similar language.

The FU in a single FU case is forbidden:

   A fragmented NAL unit MUST NOT be transmitted in one FU; i.e., the
   Start bit and End bit MUST NOT both be set to one in the same FU
   header.

and dropping is possible:

   If a fragmentation unit is lost, the receiver SHOULD discard all
   following fragmentation units in transmission order corresponding to
   the same fragmented NAL unit.

The jump in seqnum case is supported by this from the specification
instead of implementing the forbidden_zero_bit mangling:

   If a fragmentation unit is lost, the receiver SHOULD discard all
   following fragmentation units in transmission order corresponding to
   the same fragmented NAL unit.

   A receiver in an endpoint or in a MANE MAY aggregate the first n-1
   fragments of a NAL unit to an (incomplete) NAL unit, even if fragment
   n of that NAL unit is not received.  In this case, the
   forbidden_zero_bit of the NAL unit MUST be set to one to indicate a
   syntax violation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/730>
2020-09-21 08:08:38 +00:00
Seungha Yang
027940a416 imagefreeze: Response caps query from srcpad
... and chain up to default query handler for unhandled query types.
Unhandled query shouldn't be returned with FALSE if there's no special needs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/731>
2020-09-21 10:28:01 +03:00